Question revised HP Smart Pass

Similar Questions

• question to allow smart rendering, first cc

  Hello

  can I ask a question about enable rendered intelligent?

  Well, I get this function to work with some files (codec)

  Well, if I want to use made smart with a supported file, I should start a new project with the same resolution of the video I want to change and use rendered intelligent?

  In short, I have

  (1) check if the codec is sopported by first pro smart render

  (2) check the resolution rates & video frame

  (3) open a new project with the same resolution and speed

  4) import in first pro cc

  It is right?

  Thank you

  Windows 8.1 pro 64-bit

  You just need the sequence to match your clips, which must then match your export settings. Easy way to create a corresponding sequence is to drop your clip on the icon of a new item (bottom right of the project Panel). Key terms that you want to match is size of the image, frame rate, aspect and field order.

• question on the smart card's mutual authentication process

  I have a question about the process to authenticate each other between the smart card and the host application.
  
  Basic knowledge
  As far as I understand, use of the host application the KMC to derive the static key, the value of the card and this set of keys, the host application creates the set of session keys. He uses this session defined key to check the cryptogram of the map and generate cryptogram of the host.
  
  Similar process is conducted by the card with the fact that static keys are stored in the vault of the smart card in the customization of the security field transmitter phase. It sends to the host application the cryptogram of the card.
  
  Framework
  I'm trying to review this process manually. I play the role of the host application and I have in hand the necessary cryptographic functions (Triple a) and Mac.
  
  Question
  I'm trying to calculate the MAC (cipher card) as described in section 5.4.1 of the CPS v1.1 (EMV card) but I can't receive the cryptogram of the card sent to me using the reference.
  Is there more than 1 function of MAC (in theory) and this MAC function varies from one card to another manufacturer?
  
  Thanks in advance
  Best regards
  JDL

  There may be something in the API c# BouncyCastle (I don't do much dotnet so I have not tried) http://www.bouncycastle.org/csharp/

  The MAC is relatively simple. There is a line where you encrypt a block of data at a time (as opposed to entire entry) and feed the result of an iteration in the next as the ICV (initial vector chaining). The original ICV value is 0x00 all.

  See you soon,.
  Shane

• TestStand 2012 Newbee question: How do I pass a string to a VI to TestStand to control the flow of sequence?

  I want to use a drop-down list box (or a similar control) in a VI to select from a list of strings to direct execution in TestStand.

  • How connect the channel selected in the combo box at the output of the VI Terminal so I can see it in TestStand?
  
  
  • What should I use as 'value' in the parameter module TestStand to retrieve the result of that VI?

  I tried "wiring" the result of the drop-down list box directly to a terminal of output without success.

  I tried "wiring" the exit from the drop-down list box to a wire string variable then this variable to an output without success Terminal.

  (see attached files)

  Can someone give me an example of a VI that allows you to select from a list of strings: {'Bob', 'Mary', 'Bill', 'Jennifer',...} using a

  (or similar) drop-down list box control and routing of the string selected to the output terminal?

  Also, how to reference this (result) setting within TestStand?

  It is a simple task and there can be only one solution TestStand, I'm looking for a simple direct execution sequence by the operator to select a string in a list.

  I studied this problem, but could not find instances of the digital comparisons or string canned and did not find a generic model that would return a string to a VI to TestStand result.

  Thank you for suffering through this fundamental question.

  David

  Melbourne, Florida

  Marco beat me but here is my interpretation. TS 2010, LV 2011

  Also, look at the example of demo which comes with TestStand: C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2010 SP1\Examples\Demo\LabVIEW\Computer Test of the motherboard

  Demonstration should be a version of what you want.

  See you soon,.

• stupid question for a smart programmer

  This is probably a stupid question, who need a simple answer:

  I'm looking to the 'length' property in the Adobe AS3.0 language ref as I don't understand.

  It is said:

  An integer specifying the number of characters in the specified String object. (I understand it)

  Because all string indexes are zero-based, the index of the last character for any string x is x. length - 1. (I don't understand the '-1 '.) I understand that all string indexes are zero, but I can't put it as well as the last character for any string said TI-1 or something.

  Do you understand this and can you help me understand?

  Thanks in advance.

  If you create a simple example, you should be able to see for yourself.

  The length of a string is the number of characters in it.

  The index values for string to start at zero.

  So if you have four characters in a string, say "0123" is the string, then its length is 4, and because indices start at 0, the index of the 4th/last character is 3 (length - 1).

• DMVPN divide tunnling question, not able to pass http traffic to end spoke.

  Hi all

  I would appreciate it please help me solve after publication.
  I've used installation DMVPN (EIGRP routing protocol) for 20 site no problem at all, and everything works perfectly.
  Now, I have received a request that I would need to divide the legitimate business and internet traffic to end talks, so all internet traffic via a local ADSL connection, but I tried to solve it but router speaks constantly forward all traffic to the tunnel.
  Moreover, I found on internet DMVPN a limitation that split tunneling isn't possible.
  Please can you suggest me how can I send internet traffic (HTTP) via a DSL connection local
  Thank you and best regards,

  DMVPN is not based on politics, split tunneling concepts not apply.

  DMVPN relies on the road to understand what traffic should be sent by tunnel.

  In your case, you also have to distinguish between the company and the Internet HTTP traffic, better correct routing in place.

• Simple task - syntax Question (how do you pass variables from one component to another component - databinding)?

  Hi all

  I'm moving some width/height/URL of a Video Player component to a Social Bookmarking component incorporate text entry field. (for people capture and share videos).

  I know that it's a simple task, but it's the end of the day and I seem to have a brain failure... What is the syntax to achieve this? Do I have to import the video player component? These widths/heights/URLs are all generated dynamically by a XML... should I be pulling the XML or reuse just variables already existing in the Video Player component?

  Here is my code...

  Video player:

  [Bindable]

  var public source: String = "";

  [Bindable]

  public var autoPlay:Boolean = false;

  [Bindable]

  public var fullScreenMode:Boolean = false;

  [Bindable]

  public var clipTag:String = '_movie;

  [Bindable]

  public var iag_code:String = "";

  [Bindable]

  public var officialURL:String = "http://www.movies.com/"; ""

  [Bindable]

  public var referer:String = 'unknown ';

  [Bindable]

  public var gID: String;

  [Bindable]

  public var starterImageURL:String = 'http://www.movies.com/jazzmaster/images/default_starter_image.

  [Bindable]

  public var oldWidth:Number;

  [Bindable]

  public var oldHeight:Number;

  Component sharing:

  < mx:HBox

  Height = "10%".

  horizontalCenter = "-25".

  Red = '0 '.

  paddingBottom = "5" >

  < mx:Text text = "" Embed Code: "paddingTop ="1"color ="#FFFFFF"fontSize ="12"/ >"

  < mx:TextInput text = "{oldWidth}" / >

  < / mx:HBox >

  The above code generates an error... "Any attempt of property inaccessible oldWidth via a reference with a static type com:SharingBookmarks."

  Thank you all!

  DK

  Try this...

  Create a flex project and add a folder called 'src '.

  create a new component MXML named "VideoComp.mxml" and copy/paste

  http://www.Adobe.com/2006/mxml"width ="400"height ="300">

  [Bindable]

  public var videoWidth:int = 300;

  [Bindable]

  public var videoHeight:int = 300;

  ]]>

  create a new component MXML named "SharingComp.mxml" add copy/paste this...

  http://www.Adobe.com/2006/mxml"width ="400"height ="300">

  [Bindable]

  public var videoWidth:int;

  [Bindable]

  public var videoHeight:int;

  ]]>

  and here's the main.mxml file

  http://www.Adobe.com/2006/mxml '.

  xmlns:src = "src.*" >

  private void doSomething (): void

  {

  sharingComp.videoHeight = videoComp.videoHeight;

  sharingComp.videoWidth = videoComp.videoWidth;

  }

  ]]>

  Hope this helps,

  BaBo,

• High-pass filter question

  Hi all

  I have a question about the high pass filtering in LabVIEW simply based on observation, have never been taught directly on the filters.

  A signal of high pass filtering, with a Butterworth IIR filter (2nd order) for example, around the time Fortran, = 0 there is a transition from a high-intensity "false" at a rate expected, as the officer although this is achieved thanks to a program as I have nothing else to hand at the moment.  In order to minimize the importance, for the rest of the filtered signal, you can increase the sampling time, change the filter settings or even add time of additional levy in order to truncate it.

  Is there an established method to get around this?  The reason why I ask is because I'm trying to distinguish accurately Laminar and turbulent parts of a signal of speed but on time = 0, in a completely laminar signal, our method returns false positives for the presence of turbulent structures.  I assume that this will always be the case, but it is better to ask first and concluded later!

  Thank you.

  All filters have a transient initial.  You must wait until it has settled on or try to compensate for the spike in some way.  Transitional measure also depends on the input (including any noise) signal, it is generally not possible to compensate exactly.

  Lynn

• A question which must be correct pass the quiz

  Hello - I have a scenario where a course ends with a questionnaire which must be passed to 90% to pass. But I need to add another element to this scenario where as well as 90% of correct answers, a question must answer correctly, pass, regardless of what the score. Any ideas how we could go about implementing that?

  If this issue MUST be correct, I'd give this 90% of the points and all other issues 1 or 2% each to compensate for the 100% need.  Then set required for Col. preference should continue.

  In this way, unless they get the first question correct, they can never pass the quiz, but scores of 0 to 100% are possible.

  It would be a pretty good workaround solution?

• Need to build a computer but I do not know what questions to ask

  I finished a few semesters in school student first, After Effects, Photoshop, Illustrator, etc.. I'm about to start moving forward in the production of video content and forming a career around him. I bought a copy of the production premium Adobe CS6 and I need to build a computer to run it. I'm willing to pay for quality, but I don't want to spend too much. I'm a geek, but are out of the 'Performance PC Game' for so long now that I don't know where to start. Most of my work will be in After Effects and first video editing (especially since I'm off on an undetermined quality model camera).

  I want a computer powerful enough to deal with me, as my skills grow. I would also like to build from the ground. Money is not as good as a problem for me as long as I've not upgraded in a year from now. If you are going to build a new box and wanted to "smart pass" which would construct? I know that the first thing you want to ask me questions is my budget, but it varies. I would like to go under 2 k $ (not including monitors), but if I need to go on that, so be.

  You must carefully read started injury Page on the web site PPBM7.

  What media will you be editing?

  If you want the latest and greatest (longer life cycle) there will be a new generation of CPU high range and introduced by Intel chipsets, I heard, this mid-September.  It is the CPU Haswell-E and X 99 chipset.

  The CPU will be available in 6-cores and 8-core versions.  While tending towards expensive a low end version of this new generation would be a good long-term investment.  The range of Hasewell-E low processor is only i7-5820 K has a price of $ 426 pre-order.

  DDR4 memory (at least initially) will be more expensive but is much faster, and once again will be around for a long time while current DDR3 will start to become obsolete.  Eventually, you can start with minimum memory (DDR4 is now available in 4, 8 and 16 GB modules) at least 8 GB size so you have the ability to easily add more memory that you get in a more complex treatment.

  Get a small (128 GB) good SSD for your OS/Applications and at least another good SSD plus a large hard drive as a good starting point.  Good SSD have rates of great writing as the M550 Crucial and the Samsung 840 Pro.

  New X 99 chipset motherboards offer great expansion with many capabilities more lanes PCIe mothers CPU quad core current so your options for future updates are wide open.  Many X 99 new motherboards have a m2 on the motherboard and/or connectors SATA Express, which are of great progress in the exercise more new SSD that remove the limitations of bandwidth of SATA 6 Gb/s.  In the not to distant future, we are talking here of (very expensive) SSD will have up to 3000 MB/sec reading speed!

• Question of dynamic region ADF (jdev 11.1.1.4)

  Hello
  
  I use dynamic region ADF by "Elements of Navigation order" whose action is related to a method of view range bean to set the "taskFlowId" used by "af:region".
  
  I have two 'Navigation command elements' each representing a taskflow bounded on the page (JSPX). One of the taskflow has a page fragment (such as default activity) with the only active filter af:table fell on it.
  
  Questions:
  (1) when I pass between the "Element in Navigation order" links the workflow with af:table filter is not cleared which came in her previous visit. And the table is filtered with his previously entered filter criteria. I want my table to load in the same State without applying the previous filter between the navigation.
  
  (2) even with the visible previously entered filter criteria to revisit the workflow (with af:table), research without erasing the persistent filter gives me the error "try to define a parameter name that does not intervene in the SQL: vc_temp_1.
  
  Grateful for your help!
  
  Kind regards
  Pramod Gujjeti

  Hello

  the problem is there for some time, please look at:
  {: identifier of the thread = 906415}
  {: identifier of the thread = 2157454}

  You have my oracle support? Then you can search for bug 11652292 "Readmises BOUNDED TASK FLOWS FAILED for TABLE FILTERING".

  I don't know exactly yet, but I think that you must call a method which erase the viewCriterias for your view object (the object view for your table). Your method must call oracle.jbo.server.ViewObjectImpl.clearViewCriterias (). Expose the method as a public method (so you can drag and drop of datacontrol to a view or controller) and make that the default activity in the taskflow.

  Martin

• Pass a value from a PL/SQL function to a javascript (html header)?

  Hey guys,.
  
  Have a question on how to pass a value of a PL/SQL to a JavaScript function in the HTML header.
  
  I created a PL/SQL function in my database, which makes a loop.
  The reason is: on my apex page when the user selects a code, it should display (or highlight the buttons) the different project id is present for that particular code.
  
  example = code 1
  a project id = 5, 6, 7
  
  code 2
  a project id = 7.8
  
  Thank you for your help or Suggestions
  Jesh
  
  The PL/SQL function:
  
  Contact_details (ACT_CODE1 in NUMBER) of the FUNCTION to CREATE or REPLACE RETURN VARCHAR2 IS
  Project_codes varchar2 (10);
  CURSOR contact_cur IS
  SELECT ACT_CODE, PROJECT
  OF ACTASQ. ASQ_CONTACT where ACT_CODE = ACT_CODE1;
  currec contact_cur % rowtype;
  /******************************************************************************
  NAME: contact_details
  PURPOSE:
  
  REVISIONS:
  Worm Date Description of the author
  --------- ---------- --------------- ------------------------------------
  1.0 06/25/2009 1. Created this function.
  
  ******************************************************************************/
  BEGIN
  FOR currec in contact_cur LOOP
  dbms_output.put_line (currec. PROJECT | '|');
  Project_codes: = currec. PROJECT | '|' || Project_codes;
  END LOOP;
  RETURN Project_codes;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  NULL;
  WHILE OTHERS THEN
  -Consider recording the error and then re-raise
  LIFT;
  END contact_details;
  /
  

• Smart keyboard sometimes does not work

  I have a smart keyboard connected to an iPad 12,9 Pro.

  Sometimes it stops working and I have to restart the iPad be responsive again.

  This is quite annoying because it happens 4 - 5 times a day.

  I think it's a software problem. I look forward to a solution from Apple.

  Hello alessandro2410,

  Thanks to ask questions on your Smart keyboard doesn't work don't not with iPad Pro sometimes. I understand how it is important to have a functional keyboard at any time since everything we do these days is on our devices. I'm happy to check this with you.

  To make sure the Smart keyboard until properly, I want to double check all of this help article: use your Smart with iPad Pro keyboard. If everything is correctly configured, at the end of this article is the section to get help, if there are any questions by using the intelligent keyboard with iPad Pro. If the keyboard stops working, I try to adjust the position of the iPad for a while and then re - implement Type position. I would like to ask some clarifying questions to try to win because of that.

  1. have you setting the position of the iPad for a moment, then put back in the position of Type help or you must go through all the steps, and he only reconnects after restarting the iPad?

  2. when it stops working? You mentioned that it does that 4 or 5 times a day, but it's after the iPad goes to sleep, or after you do not use it for 10 minutes, you can isolate when it no longer works to offer other options?

  3. have you noticed the disconnect keyboard started after 10 iOS upgrade only?

  Please provide information and work with me here in Apple Support communities. Have a great rest of your day.

• Apple Smart Battery box

  Hey I have a question about my Smart Battery case I noticed while using the phone in the case when both are charged at 100% the phone empties slowly, even if it is connected to the case which empties as well I would be 100 percent in the phone but would increase gradually to 99% to 98% etc while the phone is supposed to be in charge in the case. but when I do not use the phone and its in my pocket or sit on a table or a desk, the battery remains on 100 percent on the phone and the case until he exhausts which is how it is supposed to work, but I think it's usual life drains real phones battery while using the phone for music Facebook I reload message email etc even if his charge of the case is this normal behavior

  Thank you

  This support document examines the case of smart battery. Charge your iPhone with your Smart - box Apple Support

  It is not included, but I remember reading more on somewhere else, and it seems that when you use the phone, it uses the phone's battery and the case will charge the phone when you stop using the device, like the day before. I don't think it requires the device while using it. According to the document of support, you should see the status of the two batteries of the lock screen and the use of intensive applications on the phone to increase charge time. I'll try to find where I read that, but encounter difficulties right now. I'll post again if I find it.

• Pavilion G7-1260us: 3 responses to the previous question were well intended but not useful. Video recording palette failed

  Apologize to publish new same problem but to reaffirm for clarification. The computer works fine with default (poor) VGA graphics, but stops almost immediately when using Intel HD 3000 graphics. All the equipment tests pass including the motherboard, but the test of component for video control palette fails.  I guess that it is the graphics card Intel chip but I don't know if it can be repaired or replaced... or anything else will cause the described problem? I have a problem almost identitical with a Macbook Pro with Intel High Res graphics card. Works well with the low-resolution graphic aps and I fear it's an insoluble Intel so stir the question.

  Finally 'pass' on all the tests.  After replacing the CPU, Windows 7 started many, many updates to loading. I downloaded the HP Vision Hardware Diagnostics for additional verification, and that's all right. Graphics card Intel HD 3000 works with 3D Open GL tests.

  Thank you.