question to allow smart rendering, first cc

Similar Questions

• CS6 MPG import issues with TMPGEnc Smart Renderer

  I was wondering if anyone else has experienced this problem and has a solution.

  TMPGEnc Smart Renderer 4.1.5 is a tool that allows the cutting of level framework of MPEG2 stream while performing a minimum of coding. I use this tool to cut scenes of the DVD source material. A cut scene is important in Premiere Pro CS6 with no error message. When I see it in the source monitor, the 3 first seconds playing very well but after that the image is deformed and loses audio synchronization. I will attach a few pictures to show the beginning and deformed.

  This happens regardless of what source DVD is used. The clip source plays well in any player I have (windows, VLC media player).

  

  

  Media information

  

  I tried your sample in CS6 and get a picture blurry even after a few seconds. And its out of sync.

• Using smart rendering under Windows with DNxHD intermediate format.

  I am trying to use effectively the smart rendering on Windows 10 w/latest first. The media entry comes from a Canon EOS 70 d, video shot at 24 fps ALL I have 1920 x 1080.

  My understanding is that I can maximize time encoding by matching the media entry for the output format. By example, if I transcode my Canon is ALL I have footage of DNxHD, I can then put to use sequences found that satisfy the DNxHD, and makes export/encoding of DNxHD super fast, especially if previews exist in DNxHD. I also understand that H.264 is not supported for previews, because it is not reasonable for first and previews format and how they would need be used as output format.

  OK, so I've created which but the usefulness of the workflow in certain circumstances is unclear to me... my goal is to speed up the encoding of video files that I can look at to evaluate where I am in my project, perhaps throughout the day or especially at the end of an important part of the editing work. I used always to create a version of test coded of my project using Ctrl-M or File/Export/output for typical mp4 H.264 files Media. As I understand it, maybe it's not desirable for rapid assessments of the project because the coding may take much more time. My understanding is that in defining the format of sequence overview to match my intermediate format, and using File/Export/Media (CTRL-M) to encode in DNxHD format even, I can greatly speed up the encoding.

  In short, it seems that I am to convert my Canon all THE-I of DNxHD since DNxHD is supported by Adobe sequences in an overview format... This aligns my "edit mode" sequence for DNxHD, where I maintain previews in the same format. I can then CTRL-M encode with "Match sequence settings" to maximize the throughput where two cutscenes DNxHD or preview images DNxHD, emitting the same... the same output format DNxHD...

  That seems to work, things are going faster, but we don't know what I'm supposed to do with the .mxf resulting in some cases that limit the flexibility I had in broadcasting in mp4...

  I mean, is that mxf is a container, I can not play easily on my cell phone or similar, so for the assessment of a project, it seems not usable as a flexible way as an mp4. Even on my desktop, without having to install any other software not Adobe, I can't see a mxf without import in first and viewing in the monitor. It's not horrible, but in this case, I'm just using first as a Media Player for the mxf, he created and which leaves me thinking that I could just pre-made and play the main sequence directly, what is the difference?

  While I'm working on a project, I sometimes, as code it where I can play back a coding of all the days of my project on my phone, laptop or desktop, independent of the first. I guess that made smart will only help insofar as it speeds up encoding in h.264 mp4 etc.

  I feel that I can miss a strategy, I can take here...

  My goal: speed up encoding, but have the ability to create every day mp4 assessments or DNxHD output that I can take with me and discovered on my tablet or mobile phone as you want throughout the day (i.e., as I went out and I have a moment to see what my eyes think where I am with my latest edition which I coded the previous day for example).

  Any thoughts on what I could be missing here, or how I can improve how that I consult the best way for me to use smart rendering?

  Thank you.

  I could just go and play the main sequence directly, what is the difference?

  None, so do it.

  My goal: speed up encoding

  Buy faster hardware.

• Can I then set up my new and old iMac to use both for rendering first and consequences?

  Can I then set up my new and old iMac to use both for rendering first and consequences?  No special installation required?

  and...

  If I understand correctly, your ability under the license agreement to install the software

  on the two systems don't allow for simultaneous use on both systems!

  but...

  for EI, there is the "Adobe after effects Render Engine"

  documented here:

  https://helpx.Adobe.com/after-effects/using/automated-rendering-network-rendering.html#NET work_rendering_with_watch_folders_and_render_engines

  "In After Effects CS6 and later versions, you can now run aerender or use spyware file.

  non-redevance rolling mode, serialization not require it. » !!!

  HAHAHAHAHAHAHAHAHAHAHA!

• Smart rendering m2v tried, but had full encode

  For a production of DVD, I have a m2v + wav file-pair, generated from first. I put in a new project, created a new sequence for the m2v file (by dragging the m2v to new button file).  Also, I checked the audio format is the WAV file.  Then I added (by right ' cut' on the timeline) a notice of copyright in the same (m2v + WAV) formats.

  When I then file > export to generate the same kind of m2v + pair of WAV file (be it in 'match sequence settings' or by selecting same presets as I had used it earlier), I was expecting a 'smart render"i.e. renovation, but on the contrary had plenty-coding (e.g. 80% CPU).  I checked this by forcing the full coding by adding a video effect, after which the export took the same duration.

  Is it possible to activate m2v-m2v made smart >?

  First version 7.2.1.  Not wanting to update I'm mid-project.

  First does not have smart render to mpeg2.

  Can read this:
  Smart Rendering in Premiere Pro CS6 (6.0.1 and later), & first Pro CC

• Questions-help needed please rendering of fonts

  Last week, a Google search on Firefox or Chrome (but not Opera) gives me results where the fonts look gappy. Sometimes there are extra points above the letters. I uninstalled and reinstalled Firefox from scratch in case an add-on was at fault, but even with a clean install, I still see the question. I checked my font settings and do not have any defined minimum font size. I allow pages to choose their own fonts ticked.

  I downloaded an image where I can see a few correctly rendered text and text to research Gauthier (not a Google search but a query of Mozilla). It also happens when the comments submitted online sometimes, as you type it will gappy but it will correctly show once. Ideas for a fix would be welcomed warmly and I can provide more examples if it would help. Even though it is not related to Firefox, I restore all default settings in Chrome and it does not solve the issue here either.

  I uninstalled the latest Windows Update since the problem is recent, but it changed nothing. I don't know if browsers would still look at my fonts for computers.

  Hi Auds77, it's probably caused by kb3013455 of update from microsoft that can cause problems of rendering fonts on vista:

  After you have installed the 3013455 security update, you may notice a degradation in quality of text in some scenarios. The problem occurs only on systems running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available.

  ^{Reference: https://support.microsoft.com/kb/3013455}

  an option may be to tackle this particular update for now until there is a fix from microsoft or you could also look at if there is a graphics driver update available on the Web site of the seller (intel/amd/nvidia) which could also be solved this problem in some cases.

• Question about popup lov extracted first set of lines

  I use lov popup extractions first set of rows for a single field in my application, question is how to do it select only the choices in the list box and does not allow the user to enter in the text box, what they want. In other words
  only what they choose to the lov?

  Hello

  You may need to search in the creation of a custom context menu page - take a look on: http://www.oracle.com/technology/products/database/application_express/howtos/how_to_create_custom_popups.html (it's an old document, but the principles are there)

  Andy

• Question about pre-ordered Album, (first time)

  For my birthday my sister gave me a $ 25 Itunes gift card and I went and pre-ordered the new Album of Metallica Deluxe, (The Set 3 disc) and I confirmed my purchases of 14.99 and my question is,.

  Has paid for the entire album in full, or each track when you click on the pre-ordered button? I am responsible for the 1.29 for the first single and again here second single, (two songs)

  Will need me even more money or the 14.99 will always cover the entire album?

  Will need me even more money or the 14.99 will always cover the entire album?

  14.99 + tax will cover it.

  When you pre-order, you pay for the titles as they become available and then pay the balance when the full album is available.  In the end, you have the complete album for the price of the correct album.

• UPDATED AND NOW ASK FOR CODE ACCESS WHICH WAS NOT ALLOWED IN THE FIRST PLACE

  I updated this morning and after that completion says to connect to itunes and enter my password.  I disabled my access code months due to my son wanting to be able to use it freely without having to enter (he knew however the password before that as well).  so now I'm stuck with the recovery of a backup one year option or erase all my data.  I'm still confused as to how the system would invite me to enter a code that has not been activated in the first place... I only got 2 different codes within 4 or 5 years I've had it and neither one works.

  any ideas?

  gigi_hage12,

  Unless you actually had an active password, this screen after the installation of the update should be only a reminder or a push to create a password at this time for reasons of security as shown on the screen. If you have never had a password, you should be able to select the option button at the bottom of the screen, where it will allow you to ignore the creation of an access code. I don't remember exactly what the screens looked like or says, but it may be another screen and prompt you again (as a "are you sure") to create a password but there will be an option to "Skip for Now". I hope this helps!

• Type questions NMH405 Impressions after the first few days - and a few beginners

  Hi all, after some research I made the plunge and acquired a new NMH405 (I really wouldn't have no existing "NMH400" i.e. no discs).  I removed the 500 GB drive and added two new drives 1.5 to WD Green Caviar and set up in Raid-1 after a few messages of error and waiting for a very long time, so that readers resynched I managed to get online as z-drive on my vista system.  I played a bit with the built-in backup tool (I like it!).  I tried the builtin player after placing some of my iTunes on the pole media albums and decided that I didn't really like this option for many.  I then simply moved my itunes on the MediaHub libraries and used iTunes on Vista as a front-end application.   It works very well.

  I have a few questions, probably show my limited knowledge of readers connected to the network.

  Q1.  Is there another way to turn off the device by pressing the bottom on the NMH405 (aka my NMH415!)? When turned off, I assume that the only other way to power it on again via the background?

  Q2.  I noticed that the device is offline for centuries after having recycled Windows Vista or the hub itself.  Why is this? And what can I do to put it online in an orderly fashion?  There must be a way to get that ugly red crossed NAS showing green and online as a z-drive in 'My Computer' much faster.

  Q3.  I reformatted the drive of 500 GB that the box came with, added to the drive enclosure box and attached the port USB in front of the NMH405, after awhile he said on the Panel until she had detected the drive and asker if I wanted to import content.  I refused (partly because he was empty!).  Now, how do you get this drive? (Occasionally), I would use it to backup my Raid-1 configuration files (most recent do you know what might happen there...).  How to use this USB disk attached?  Also, I noticed that it does not appear in 'My Computer' - in fact "computer" in windows?  Add directly to my windows system it is detected instantly?

  Thanks for the pointers or responses to improve my user experience.  I'm still learning here.

  Best regards

  Q1. Your correct, there is only one button on the front for the start/stop. There is an option to restart the device inside the web interface through the configuration > system option.

  Q2. It depends on how fast your network can establish a connection, a mapped network drive is fine but I noticed that it slows down the process startup or logon when you turn on the PC. What I did just create a shortcut on the desktop (site \\nmh410\media) that points to my mediahub and did not map the mediahub more to drive z.

  Q3. If it's still a drive of 500 GB fresh with nothing on it, then you will need to create a partition on it firstly the external USB drive by connecting directly to the PC. Read this Microsoft article on partitioning. In my view, that an external USB drive icon will not be displayed on the PC from the external USB drive is plugged into USB port of mediahub. To access this disk external USB which is plugged into the USB port of mediahub, I simply create a shortcut to \\nmh410\media\device . For backup, you can use the NTI Backup software that accompanies your mediahub.

  See you soon.

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• AE sudden drop, his question and ghost image rendering performance.

  Hi, I'm under CC2015 last, AE on a computer 64 bit Windows 10 Pro with the following specifications:

  Proc: Intel Core I7 - 5930K (3, 5 GHz, not overclocked)

  RAM: 32 GB

  GPU: AMD over-pants W7100 8 GB of DDR5 RAM memory

  Each driver is up-to-date.

  I experienced these problems since yesterday without reason at all (no new updates or new software any newly installed)

  It started with a composition Dynamics first sent link (CC2015, later) EI, mixture of several sources (mxf DnxHD, mp4, mp3)

  • The first problem is that whenever I tried to make to my comp in AE, even forcing activation of the sound on the export, the rendered file contains a VOID soundtrack.

  It occurred when the default rendering in a NON-DESTRUCTIVE (Animation codec). AVI file.

  I tried to normalize my sources in first each of them exporting to DnxHD. The mp3 and the MXF files track into an AIFF file with no effect.

  When I switched to a NON-DESTRUCTIVE (codec Animation) . MOV file, the sound was present and functional, but it's just a workaround, not a solution.

  • Second problem is that there was a significant decrease in performance I tested by the rendering on a FullHD 5' computer with a single solid layer in it. The rendering is 5 minutes of erratic progression.
  • The third problem is that no matter what codec or the container used in the render queue I always end up with a file in which whenever it was supposed to show the bottom of the comp, I have an image of 'Phantom' of one of my layers appearing.

  Even during the passage of each layer, this image is the display constantly through the comp.

  It disappears only when clean the cache, but comes back with each rendition. Even if the layer source of this image is not present in the COMP.

  This image is displaying in first when using the model of dynamic links.

  Here's what it looks like when I open AE.

  Note that the model is empty and yet, there is a ghost image.

  

  Cleaning the cache, restart several times, has no effect.

  Last thing I will try is to re - install After effects but I have little hope that it will solve anything.

  What should I do now?

  EDIT: I have now if she has something to do with the new preview, but when I go to any computer, image is not updated in the comp Panel. (caps lock is off of course)

  I have used no third party plugin on this project.

  As expected, AE re-installing has not effect.

  There is a bug in 13.5.1 AE where it is not sound unless he renders a MOV file (or make you through Adobe Media Encoder instead of the queue of EI). The value is fixed in the update of the following month.

  Your ghost image is probably something a bit twisted with your cache. Try to import the project into a new project.

  In CC 2015 (version AE 13.5.x), the preview is not displayed during a rendering. In my view, that this feature is back in the update of the following month. See what Adobe post about things not yet present in the new architecture of CC 2015 http://adobe.ly/1cXyVHV

  If you are having too many problems with CC 2015, could install CC 2014 next to her and to use that to update the following month. http://blogs.adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015 /

• Random green frames in rendered first and export of files

  Hello!

  I just put a new MacBook Pro and I have a problem of rendering in first CC. Random green frames appear sporadically throughout my video. This is happening on my rendered calendar and in the exported file. It seems to affect clips with heavier color correction. What happens and how can solve this problem?

  Here is a link to the video on Vimeo. You can see the Green frames to 00:04, 00:43, 01:03, 01:39 01:48, 01:58 and 02:25.

  I'm editing on first CC. Most of the clips have effects heavy work (movement, fast color corrector, RGB and overlay for vignetting circle curves). All the project files and images are stored on a WD My Passport external 2 TB Portable USB 3.0

  The film is a set of 5 D Mark III for 1080 p IPB, so files are .movs.

  Export to the H.264 format with the Vimeo HD 1080 p 23.976 preset, without changing the settings predefined. But again, the problem product also prior to export, after on the timeline.

  MacBook Pro

  Retina, 15-inch, mid-2014

  CPU: 16 GB 1600 MHz DDR3

  Graphics card: NVIDIA GeForce GT 750M 2048

  Software: OS X 10.9.4 (13E28)

  Help, please! Thank you!

  Stephen

  Fixed a problem!

  Someone from the support team Adobe asked me to change the rendering in software only mode engine. This can be changed under file > project settings > General. Specifically, I changed Mercury Playback Engine acceleration GPU (Open CL) to Mercury Playback Engine software only. I deleted the old files of rendering and re-exported with no other problems.

  Success!

• question on the smart card's mutual authentication process

  I have a question about the process to authenticate each other between the smart card and the host application.
  
  Basic knowledge
  As far as I understand, use of the host application the KMC to derive the static key, the value of the card and this set of keys, the host application creates the set of session keys. He uses this session defined key to check the cryptogram of the map and generate cryptogram of the host.
  
  Similar process is conducted by the card with the fact that static keys are stored in the vault of the smart card in the customization of the security field transmitter phase. It sends to the host application the cryptogram of the card.
  
  Framework
  I'm trying to review this process manually. I play the role of the host application and I have in hand the necessary cryptographic functions (Triple a) and Mac.
  
  Question
  I'm trying to calculate the MAC (cipher card) as described in section 5.4.1 of the CPS v1.1 (EMV card) but I can't receive the cryptogram of the card sent to me using the reference.
  Is there more than 1 function of MAC (in theory) and this MAC function varies from one card to another manufacturer?
  
  Thanks in advance
  Best regards
  JDL

  There may be something in the API c# BouncyCastle (I don't do much dotnet so I have not tried) http://www.bouncycastle.org/csharp/

  The MAC is relatively simple. There is a line where you encrypt a block of data at a time (as opposed to entire entry) and feed the result of an iteration in the next as the ICV (initial vector chaining). The original ICV value is 0x00 all.

  See you soon,.
  Shane

• 2 questions about the use of first Elements 8?

  Hello

  My questions stem from the same question.

  I am importing a 1200 to 900 instituted .avi files ask PE into several pieces.

  The reason is that I have an effect where a ghostly character I appear in a grave yard behind my character of Lucy.

  I then re-import him in as a backdrop and the place of Lucy and other accessories in front of her.

  There is no option in ask for crop or something like that. It is 1200 900, it is she.

  It works fine except when I export of it PE to 1200 900 it does not fill the frame, as it did until I imported to begin with.

  That is the number 1 issue.  It is not evident in the preview window that it does not occupy the framework.

  It does seem that it once it is exported.

  I can do fill the frame by dragging the largest PE image so that it does not fill the frame when I export.

  But it won't let me bring together them and make the 3 pieces as a unit.

  This makes it very difficult to then match exactly.

  My questions are...

  Is there a way to make the EP to import the AVI file to make it exactly the size it was first.

  I don't know why he puts a black boarder around the PE image.

  Otherwise, it is a way to group resizes the clips as soon as they are in PE.

  If I could find a way to do it by the percentage, I could probably understand how he must still return their full frame.

  Thanks in advance...

  Mike

  Mike,

  Although not directly related to your exact problem, this ARTICLE will give you some information about the file as "wrappers" formats, and this ARTICLE will give you some information about the CODECS. They may help to explain why some of your options to Export of Poser do not work in the field.

  I also think that your work in 1440 x 1080, you'll have much closer in your workflow.

  Good luck

  Hunt