Question simple reversal...

Hi guys... Simple question...

I have 1 MC with buttonMode = true. There are 2 text fields that are nested inside the graph 1 button inside the MC. My question is that when I roll my mouse and my switch, the roll effect is gone if I roll over my text fields... the mouse is still inside the button image but the roll effect has gone... see below...

-------------------

| TextField one |

| TextField b | <-button

| |

-------------------

I hope that I explain myself well... when I roll over to textfield a or b... the effect for my button, the reversal went... ideas? Thank you...

use:

yourmc.mouseChildren = false;

Tags: Adobe Animate

Similar Questions

question simple css
Hello

I'm stuck with a question simple css-

I need to display some text below the other strings:

Text1
Text2
Text3

I use jspx:

< af:panelGroupLayout layout = "vertical" >

< af:panelGroupLayout >
< af:outputText value = "text1" / >
< / af:panelGroupLayout >

< af:panelGroupLayout >
< af:outputText value = "text2" / >
< / af:panelGroupLayout >

< af:panelGroupLayout >
< af:outputText value = "Text3" / >
< / af:panelGroupLayout >

< / af:panelGroupLayout >

well, I receive the channels displayed vertically.

but I need them to the right of the screen-

so I use the style class:

{.textClass}
float: right;
}

and adding in all three group layout in the hope that the three strings to shift right-

< af:panelGroupLayout layout = "vertical" >

< af:panelGroupLayout >
< af:outputText value = "text1" styleClass = "textClass" / >
< / af:panelGroupLayout >

< af:panelGroupLayout >
< af:outputText value = "text2" styleClass = "textClass" / >
< / af:panelGroupLayout >

< af:panelGroupLayout >
< af:outputText value = "Text3" styleClass = "textClass" / >
< / af:panelGroupLayout >

< / af:panelGroupLayout >

they go right, but they are now displayed on one line:

text3text2text1

what I wanted was-

-------------------------text1
-------------------------text2
-------------------------text3

Please suggest.

Thank you.
Why so complicated?
```
            
                
                
                
            
```
the round is played.

Timo

With data - loss question mark reversed
Hi people,

Linux - 11.2.0.2.0

When I try to insert special characters (' € @, etc.), it turns out as question mark reversed or some unwanted values.

NLS_CHARACTERSET = WE8MSWIN1252

Please suggest on the same.

Thank you
KSG

Published by: KSG January 11, 2012 20:50
KSG wrote:
Srini,

Yes, the mab issue be with the app/jdbc driver (driver newest is used).

Now suspicious lossy data are perhaps because of the database being upgraded to 11 g, using imp/exp (without csscan).

Exp/imp will not result in data "lossy" condition that the process ran correctly - in fact, it's the recommended way to change charactersets. See http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#CEGCHGIJ.

Is there a reason exp/imp has been used on the DBUA preferred method for the upgrade?

My web application runs on Java. There is a field "note" in the application, when some NOTE are back extract, it appears with undesirable characters (upside down question mark points, #53 @, etc.). The note field can be typed with any language like french, English and other.

PL specify exactly how you 'see' data - through the app through SQL * Plus, through SQL Developer, or in some other way?

At the end of the database. I create a table and insert special characters. When I retrieve the data through sql, absolutely no problem. The data are very good.

Yet once, pl specify exactly how you 'see' data.

The problem arises when data is inserted at the end of the application.

Thank you
KSG

How the application connects to the database?

HTH
Srini

Question simple signatures!

Hello team Cisco,

I have a simple question for you to do. Why disable most of default signatures? Have no explanation? Why are obsolete? What signature should I allow and what should I disable?

You could help me, please?

Kind regards

Rodrigo Alves

My thoughts without order.

set to disable by default signatures

a. a few signatures are vulnerabilities that are very old. Signatures would be necessary only in rare cases. Affecting the default signature can save resources to the IPS.

(b) the quality of a signature is perhaps not very high. If the signing is enabled, a large number of false positives generated may be creating frustration for the admin.

I could go on, but I think you get the idea.

What signatures need to be activated?

Signatures that meet your environmental requirements must be enabled. If you are a shop all Windows, you don't need signatures Unix oriented. In addition, you must enable the signatures that match your organizations security policies.

I would start with the signatures of what Cisco has enabled by default. Feel you comfortable alerts, false positives tune and address problems, allow more signatures.

3 command line questions simple esxi

Hello
I have 3 simple questions on the ESXi-shell commands
1. How can I execute a command dd and gzip the results without storing the file somewhere?
/ tmp # dd if=/vmfs/devices/disks/mpx.vmhba1\:C0\:T0\:L0:1 of=/tmp/dd.dump bs = 1 M count = 20
/ tmp # gzip - c dd.dump > dump.gz
instead of these 2 lines do it all in one without store dd.dump
2. how created a list of all the vmx files in a data store without also listing the files whose name as vmx - blabla.vmdk vmx or *.vmxf
the output must use full paths so I need something like this but without the false results
find/vmfs/volumes/datastore1 / * | grep ".vmx" | grep - v '.vmxf' > vmx - files.list
3. How can I grep all files in vmware*.log in a data store for a complex chain as "scsi0:0.filename ="redirect results in a file that lists the results like.
/ vmfs/volumes/datastore1/test/test. VMware.log: 2012-10 - 01 T 07: 19:00.120Z | VMX | Scsi0:0.fileName DICT = WIN02.vmdk
/ vmfs/volumes/datastore1/test2/test2. VMware.log: 2012-10 - T 02, 07: 19:03.120Z | VMX | DICT = test2.vmdk scsi0:0.fileName
Thanks in advance

3. you could xargs - find/path/to/vmfs /-name 'vmware*.log ' | XARGS grep-i chain

I guess that's 4.1 - I'm still not sure if ESXi xargs

HTH

~ Stephanie Sai

button simple reversal & quot; more & quot; issue of the State
Hello!
I'm having a problem with the creation of some of the buttons of the reversal of MX 2004 Pro database. I am trying to create a button and when the user hovers over it, an image appears. I did it before using the top, most, and hit said no problem, but this time it's different. When I test my film, the images that are supposed to appear when the mouse is over the button will appear when the mouse is not the case near the button. It's like the State takes half of the scene, but I can't understand why... I'm totally stuck. Can anyone help? Or point me in the direction of aid because my manual Flash failed me this time?

Much obliged!
m
The affected area represents the active area of the button, if you place a complete picture in the things of the area will be messy. What you need to do is simple: in the area of key just duplicate a small place (any color because it will be not visible) the same size as your buttons on squarry on the left and paste it exactly in the same place as the original inside the key and on the frame of the affected area. Yet once, don't put anything else on the affected area. From what I've seen on your site, all the buttons are overlapping because you place an image in it hit all regions.

Question about reversal of pin of the PXI-6562

I have a PXI-6562 card with cable which is the note.

Note If you create a customized with connector wiring solution (779157 - 01) and cable (192744-01), the NI 656 x pinout is reversed at the level of the end fitting. For example, the signal on pin 1 on the previous figure would map to pin 73 at the level of the end fitting.

Pin 1 go back to pin 73, but what about the pairs?

Pin 2 return to 71 or 72?

1 - 73

2 - 72

.....

73 - 1

All pin codes signals add up to 74

Navigation question simple (I think)

Hi - I've got a new Sansa Fuze 8 GB that I quite understand, but they have a small question. If I'm listening to a file (podcast, audiobook, etc.) and scroll to another "section", for example, parameters to check how much battery I have left it, the podcast playing appears in a small strip along the bottom. Is there a quick way to return to the file that plays. My old player had an option to go to playback in progress, but I don't see that in the "rocket". If I wait it goes back to reading podcast, but wonder if there is a way to jump to it on demand? Of course, maybe I should just learn to be more patient... TIA, Sally

I guess that if you press the menu button twice it should return to the now playing screen.

Question simple signal...

I am trying to hang a simple signal with no params... But I can't get my hands on the appropriate syntax!

The example I'm looking at has the following syntax:
```
class MyDataModel: public bb::cascades::GroupDataModel
{
Q_OBJECT

Q_PROPERTY(QString myField READ myField WRITE setMyField
    NOTIFY myFieldChanged)
...

  void myFieldChanged(QString value);

  QString myField ();

signals:
  void myFieldChanged(QString value);
```
In QML, connect the signal by using the following:
```
  onMyFieldChanged:
  {
    // When the signal is fired.
    console.log("onMyFieldChanged()");
  }
```
I would add two new signals, but the two signals do not need to read and write properties...
```
signals:
  void dataFetchStart();
  void dataFetchEnd();
```
What would the syntax required in the my*.h file... The following syntax does not cause the compiler throw high... but that I can't plug my signal in QML...
```
Q_PROPERTY(NOTIFY dataFetchStart)
Q_PROPERTY(NOTIFY dataFetchEnd)
```
Just use:

Q_SIGNAL dataFetchStart() etc. instead of Q_PROPERTY. The property is of values that you want to propagate to QML.

I hope that the question simple Analytic Functions
Hi, we are on 10.2.0.4 under Red Hat Linux.

I have a situation I don't know can be answered better with analytics, but I'm fighting to get the best solution.

First of all defined data:

CREATE TABLE POSITION_ASGN
(THE VARCHAR2 (5) OF EMPLID NOT NULL)
DATE OF ASOFDATE
, ACT_POSN VARCHAR2 (5) not null
, SUB_POSN VARCHAR2 (5) not null
RPT_POSN VARCHAR2 (5) not null)
;
INSERT INTO POSITION_ASGN
VALUES (' EMP01', to_date('01-JAN-2013','dd-mon-yyyy'), '00065', '00065','00033 ' ")
;
INSERT INTO POSITION_ASGN
VALUES (' EMP01', to_date('01-FEB-2013','dd-mon-yyyy'), '00096', '00065','00054 ' ")
;
INSERT INTO POSITION_ASGN
VALUES (' EMP02', to_date('01-JAN-2013','dd-mon-yyyy'), '00096', '00096','00054 ' ")
;
INSERT INTO POSITION_ASGN
VALUES (' EMP03', to_date('01-JAN-2013','dd-mon-yyyy'), '00103', '00096','00054 ' ")
;
INSERT INTO POSITION_ASGN
VALUES (' EMP04', to_date('01-JAN-2013','dd-mon-yyyy'), '00117', '00096','00054 ' ")
;
INSERT INTO POSITION_ASGN
VALUES ('MGR01', to_date('01-JAN-2013','dd-mon-yyyy'), '00054', ' 00054', ' 00017')
;
INSERT INTO POSITION_ASGN
VALUES ('MGR02', to_date('01-JAN-2013','dd-mon-yyyy'), '00054', ' 00054', ' 00017')
;

Titles of the table where a person is in the organization.
ASOFDATE - history of tracks over time
ACT_POSN - acting, where the person is physically
SUB_POSN - substantive position, where the person should be, usually the same as ACT_POSN, but if you're ready to someone else it's your original position
RPT_POSN - that make you in your acting

What I do is on a given date, with a number of given position return a data set that shows all holders acting in a column, all substantive holders in a second column and all holders acting position reports in a third column.

Ignoring the notion of date at the moment, I can create a simple union query to:

SELECT 'ACTING' 'MODE', 'NUMBER', EMPLID ACT_POSN
OF POSITION_ASGN
WHERE ACT_POSN = '00096'
UNION
SELECT 'SUBST' 'MODE', SUB_POSN, EMPLID
OF POSITION_ASGN
WHERE SUB_POSN = '00096'
UNION
SELECT "MGR" 'MODE', A.ACT_POSN, A.EMPLID
OF POSITION_ASGN A, POSITION_ASGN B
Where A.ACT_POSN = B.RPT_POSN
AND B.ACT_POSN = '00096'

Produce a single output
ACTING EMP01 00096
ACTING 00096 EMP02
BISHOP 00054 MGR01
BISHOP 00054 MGR02
SUBST 00096 EMP02
SUBST 00096 EMP03
SUBST 00096 EMP04

But I can throw it in a table of 3 lines according to the value of 'MODE' so that I find myself with
MANAGER - BACKGROUND - ACTING
EMP01 - EMP02 - MGR01
EMP02 - EMP03 - MGR02
vacuum - EMP04 - white

I could see how I could generate a Rank() on parittion by NUMBER, MODE to find out the fact that I need 3 rows (because there are three background PGE in 00096), maybe as an argument of the no_lig object and then select join based on the MODE and the value of the no_lig argument, but it all feels so round the houses that I wonder if doe analytics that can better.

Does anyone have advice / sample code I could bone?

Published by: Paula Scorchio on 17 March 2013 22:49

I forgot to say that this is my rough code that kind of did what I need
SELECT A.RN, MAX (DECODE (B.RN, A.RN, DECODE (PMODE, "ACTING", EMPLID, ' '))) 'INTERIM', MAX (DECODE (B.RN, A.RN, DECODE (PMODE, "SUBST", EMPLID, ' '))) 'SUBST', MAX (DECODE (B.RN, A.RN, DECODE (PMODE, "MGR", EMPLID, ' '))) 'MG '.
Of
(SELECT ROWNUM 'RN' FROM DUAL CONNECT BY LEVEL < =)
(SELECT MAX (RN) IN)
SELECT 'ACT', 'VALUE', ACT_POSN, EMPLID, RANK() OVER (PARTITION OF ACT_POSN ORDER OF EMPLID) "RN".
OF POSITION_ASGN
WHERE ACT_POSN = '00096'
UNION
SELECT 'SUBST' 'VALUE', SUB_POSN, EMPLID, RANK() OVER (PARTITION OF SUB_POSN ORDER OF EMPLID) "RN".
OF POSITION_ASGN
WHERE SUB_POSN = '00096'
UNION
SELECT "VALUE'" MGR", A.ACT_POSN, A.EMPLID, RANK() OVER (PARTITION BY A.ACT_POSN OF A.EMPLID ORDER)"RN ".
OF POSITION_ASGN A, POSITION_ASGN B
Where A.ACT_POSN = B.RPT_POSN
AND B.ACT_POSN = '00096'))) (),
SELECT 'ACT', 'VALUE', ACT_POSN, EMPLID, RANK() OVER (PARTITION OF ACT_POSN ORDER OF EMPLID) "RN".
OF POSITION_ASGN
WHERE ACT_POSN = '00096'
UNION
SELECT 'SUBST' 'VALUE', SUB_POSN, EMPLID, RANK() OVER (PARTITION OF SUB_POSN ORDER OF EMPLID) "RN".
OF POSITION_ASGN
WHERE SUB_POSN = '00096'
UNION
SELECT "VALUE'" MGR", A.ACT_POSN, A.EMPLID, RANK() OVER (PARTITION BY A.ACT_POSN OF A.EMPLID ORDER)"RN ".
OF POSITION_ASGN A, POSITION_ASGN B
Where A.ACT_POSN = B.RPT_POSN
AND B.ACT_POSN = '00096') B
A.rn group
Hello

Thanks for posting the CREATE TABLE and INSERT statements; It's very useful!

That means each line of output represent? It seems that the nth line output has the distinct interim nth emplid, the nth emplid background and the nth Manager happens to one of the many. The columns of each row are all related to the same ('00096' in this case) target id, but other than that, they seem to have no real connection between them.
It looks like a Fixed price query , like this:
```
WITH     targets          AS
(
     SELECT     '00096'     AS target_id     FROM dual
)
,     all_modes     AS
(
     SELECT     CASE LEVEL
              WHEN  1  THEN  'ACT'
              WHEN  2  THEN  'SUB'
              WHEN  3  THEN  'RPT'
          END     AS mode_abbr
     FROM     dual
     CONNECT BY     LEVEL     <= 3
)
,     unpivoted_data     AS
(
     SELECT  am.mode_abbr
     ,     t.target_id
     ,     CASE
              WHEN  am.mode_abbr = 'ACT'
               AND  e.act_posn   = t.target_id  THEN  e.emplid
              WHEN  am.mode_abbr = 'SUB'
               AND  e.sub_posn   = t.target_id  THEN  e.emplid
              WHEN  am.mode_abbr = 'RPT'
               AND  e.act_posn   = t.target_id  THEN  m.emplid
          END     AS emplid
     FROM               targets     t
     CROSS JOIN        all_modes     am
     JOIN                  position_asgn  e  ON   t.target_id IN ( e.act_posn
                                              , e.sub_posn
                                          )
     LEFT OUTER JOIN  position_asgn     m  ON   m.act_posn  = e.rpt_posn
)
,     got_r_num     AS
(
     SELECT     u.*
     ,     DENSE_RANK () OVER ( PARTITION BY  target_id
                               ,                    mode_abbr
                         ORDER BY        emplid
                       )         AS r_num
     FROM     unpivoted_data  u
     WHERE     emplid  IS NOT NULL
)
SELECT       MIN (CASE WHEN mode_abbr = 'ACT' THEN emplid END)     AS acting
,       MIN (CASE WHEN mode_abbr = 'SUB' THEN emplid END)     AS substantive
,       MIN (CASE WHEN mode_abbr = 'RPT' THEN emplid END)     AS manager
,       target_id
FROM       got_r_num
GROUP BY  target_id, r_num
ORDER BY  target_id, r_num
;
```
There may be times when you'll want to do this for multiple targets together, is not only a target (for example, ' 00096'). The first auxiliary request, target, specify any number you want, including 1
Instead of making a UNION 3 way to unpivot data, it will be probably more effective to cross the join to a 'table' with 3 rows. What's the next sub-querry, all_modes, for.
The 3rd subquery, unpivoted_data, finds the relevant lines in position_asgn and unpivots or divided) 3 ranks, for the 3 modes.
The following subquery, got_r_num, gives the line number for each distinct to display value. This could be done in the previous subquery, no cross data dynamic, but to avoid repeating the expression BOX great, I used a separate subquery. If you don't care the order of the items, you can easily use DENSE_RANK in unpivoted_data.
The application main re - merges the nth lines for each target 1 row. If you don't have only one target, then, of course, then you need not display target_id.

For more information on queries to fixed price, see {message identifier: = 4459268}

Silly question, simple answer?

Hello. I'm sure this is a stupid question, but after reading tons of text I can't seem to get the answer that I wanted (or I'm simply not understand something correctly). I have a virtual machine at work that we currently copy for 6 portable hard drives (all the 'raw' files, no packaging). Each HD has exactly the same thing. We do this, as if someone in our society needs to run a demo, the right tools are in the virtual machine, so they just plug their PC, launch VMWare Player and open the virtual machine. We have 6 HDs because most of the time, half of them are away or with someone, so I need spare parts as much as possible. This method works for the most part, as long as people know what that make them, but I expected a little better solution, such as the packaging of the virtual machine through ACE. The problem is that I have only 1 client license. I'll be able to use my 1 license to condition my VM 1 and copy it to 6 HDs so that those who need can use it? Or do I have to have 6 licenses for each of the laptop HDs, as well as more licenses for each PC the ACE can be played on? Thank you for your help.

Yes, you would need for each player license

(if you have the possibility to use a volume license, but can be that the cost is high?)

concerning

Jose Ruelas

Question simple interface ODI
Hello

ODI 11.1.1.3
Oracle databases

I created a simple interface
target mapping from source to the columns in the table.
the lkm is oracle to oracle (databaselink)

When I run the interface, I get error

"ODI-1228: SrcSet0 of the task (loading) fails on the connection target ORACLE ORACLE_TGT_schema.
"Caused by: java.sql.SQLSyntaxErrorException: ORA-01031: insufficient privileges".

This error takes place at step 4.

The generated code is the failure

create synonym ODI_WREPO. C$ _0CTA_IMP_DEV_PLA
for ED_STORAGE. C$_0CTA_IMP_DEV_PLA@T_ED_READER. EUDRA.ORG

When I do a simple select

Select * from ED_STORAGE. C$_0CTA_IMP_DEV_PLA@T_ED_READER. EUDRA.ORG (via my repo user odi_wrepo work),
This method works.

Also the user odi_wrepo has been granted 'create any synonym' and "remove any what synonym"

I also tried with grant 'create public synonym' and ' drop public synonym '.

What should I do?

It's my first interface.

Thank you
s
you run this code in Toad/sqldeveloper

create synonym ODI_WREPO. C$ _0CTA_IMP_DEV_PLA
for ED_STORAGE. C$_0CTA_IMP_DEV_PLA@T_ED_READER. EUDRA.ORG

Can you create?

Thank you

Question simple film Director

I'm very new Director, but I need to get this 'slide show' made for our company.
Here are the details:
I have static images and video clips that I need to display on a TV at a trade show
I need movies/images to keep just a loop until someone presses a button how it will load a flash file (I think I knew that)
My question is,
I don't know I can simply slide the length of the movies and images through the partition so that they play for the duration of each film (I figured out how to delay the images on the screen), but there must be a way more organized for me to tell the Director ' play this one for the duration of 02:30 then go on the next image on the score to play whats next.
I tried the MovieDelay command that works very well for static images, but when I put on the film, he plays the sound, but pauses for the video.
I can't find the right direction to find the answer

This is a behavior you can drop on your video (assuming that it is a member of QuickTime).
```
-- End waiter
-- Keep the play head a the end of the sprite until the end of a quicktime movie has been reached
-- Drop this behavior on the quicktime sprite

on exitframe me
  sp = sprite(me.spritenum)
  if (sp.endFrame = the frame and sp.movieTime < sp.member.duration) then
    go the frame
  end if
end
```

A few questions simple interface

Hello.
I've been using Edge for a few months now. some of it is incredible. the game of and stop at functions in particular.
He has problems for sure however.
While I worked, I copied a few interface issues.
1. in the library, how can I see anything actually what? I see not miniature or a way to click on the symbols or png.
2. is there a place to see all of the code I'm working with the project? I have code dispersed across a my keyframes and it would be great if there was 1 place that he had consolidated.
3. in the choice of colors of text is it possible to eye drop pixels on the scene?
4. can you take a picture of the poster from the inside of a symbol, or should it be what happens on the main stage? If not, can I exported images off the premises of the time line? I want screenshots of what is going in my subelements.
5. is there a way for the symbols to be automatically names? If she'd keep just the png for the symbol and the layer name, I would be set. but as it is I'll have to make a lot of seizure and it becomes tasking and inelegant.
6. from the assets, can I right click on an any png and make a symbol? or do I have to let the drag on the stage first and then make a symbol.
Serious bugs:
1. I had the scene puts don't not updated when new items are added to it. Edge had to be restarted.
2. I had the publication settings dialog box get locked up on me several times. Edge would always work behind the dialog box, but the tricks of publication would not go far.
That's it for now. Thank you
John

Hi, John.

We are actively working on the next version of edge animate, so all these comments is excellent. Let me answer some of your questions:

1. we have a few icons to see what kind of assets are in the library, for example images icons when the line image, icon symbol if the element is a symbol. However, it is impossible for you to introspect them now, but you can see an asset in his directory by right-clicking on it.

2. Yes. You can use the code Panel to view all the code in the form of the tree, and if you really want to see all the code, there is a button in the upper right corner that says "full code". You can also view all events on a symbol or scene by clicking on these lines in the code pane.

3. we do not have a function of drops eye in 1.0.x if it isn't certainly an element in our list of feature requests

4. No, it's a snapshot of what is happening on the main stage at this precise moment. You can get images from various places in the timeline - you can take pictures of posters of the main timeline by moving the playhead in the timeline panel, and then capture the image of the poster of the step properties panel.

5 symbols will be named automatically, but not based on a custom symbol prefix, if that's what you're asking.

6. not at the moment, none; you will need to do something before creating a symbol.

About your bugs, can you please post some examples of files that reproduce the problem? Then we can in it.

Thank you

-Elaine

Question simple quue PL/SQL nested tables
Hello, my question is about nested tables. Suppose I have a nested table:
Int_array ARRAY TYPE IS INT;
v_int_array int_array;

Is there a built in function for me to v_int_array for a specific integer search value?

George
MEMBER of operator use:
```
declare
    TYPE int_array IS TABLE OF INT;
    v_int_array int_array := int_array(1,2,3,4,5);
begin
    if 1 member of v_int_array
      then
        dbms_output.put_line('Found it!');
    end if;
end;
/
Found it!

PL/SQL procedure successfully completed.

SQL> 
```
SY.

Question simple reversal...

Similar Questions

Maybe you are looking for