Question to Muse database assistance

Similar Questions

• Question about the database to use with ESX and Labmanager

  Hello

  Finally my company is buying a permit for Labmanager and ESX server using Labmanager to our tests.

  We had a question about the database that we use for the actual installation.

  Could we use MY - SQL? Or that we have the olbigation to install a SQL or Oracle DB for the whole system to work?

  We prefer to use MY_SQL because it is open-source and will cost less to use for us.

  Thanks in advance for the answer and please excuse my bad English, I'm french spoke first.

  Lafa91

  Montreal.

  Lab Manager installs SQL Express as part of the installation and use. If you install also Virtual Center as part of your deployment of Lab Manager (do not use an existing VC server), you can use the database SQL Express is included for small installations of ESX, but MY SQL is not an option. You can search the databases supported in the installation guide for what version you deploy.

• Question of sampling DAQ Assistant

  Hi all

  I have attached a VI that I used to record data from a few different voltage and the channels of the strain. All channels and sensors work perfectly and the VI reads data very well, but will be only newspaper for about 9 seconds. I found that the reason is that, within that period, the amount of updated read samples is reached. I also found that the reason for which is rather than on the statement sampling DAQ assistant 50 or 100 Hz it samples at a rate of about 1.6 kHz (0,000620 seconds). I have nothing seems to change the rate of that sample to so if anyone has any ideas it would be much appreciated!

  Thank you very much

  Andrew

  I think I can explain what is happening. In a previous post, the op mentions using a 9237. That has a sampling rate minimum of 1.63 kech. / s. The rate in the corresponding file.

  Andrew,

  Read the Manual would have answered your question.

• Question about the database update for Vsphere 4.1 to 5.1

  Hello

  We are about to upgrade our environment vsphere 4.1 and 5.1. I have a question regarding the upgrade of the vcenter server. Today, we have installed SQL SERVER 2005 Express database and what I get when I run the setup I will be invited to install 2008 r2 express or use the existing database. I guess I picked the new installation 2008 r2 express database? This will keep my DB inventory and just install the new DB SSO and tables?

  I read that you need to run som aswell from the installation CD SQL queries but are - that if you choose the existing database?

  hope you understand

  If you are doing a new installation of 51u1/5.1, the DB that is installed is 2k8R2 express... However, on the update from versions 4.x 2 k 5 db is preserved.

  Concerning

  Girish

• Basic question about Flashback Database

  
  Hello

  I have a very generic question on the use of Flashback Database.

  On my systems tests, for use in testing and simulation performance, I want to create a guaranteed restore point so I can test impact on lot when releases of code changes are made before production deployment.  My confusion is in what regards newspapers of restoration, which are summarized in the following questions:

  1. is it possible to change the redo log files, when a guaranteed restore point has been configured?

  2. If so, is the Flashback to restore, point also change the size of the logs again?

  I found nothing in the documentation on this subject... Where my question...

  Appreciate your time taken to answer these questions...

  Kind regards.

  Hello

  donneskold wrote:

  Hello

  I have a very generic question on the use of Flashback Database.

  On my systems tests, for use in testing and simulation performance, I want to create a guaranteed restore point so I can test impact on lot when releases of code changes are made before production deployment.  My confusion is in what regards newspapers of restoration, which are summarized in the following questions:

  1. is it possible to change the redo log files, when a guaranteed restore point has been configured?

  (1) Yes it is possible.

  2. If so, is the Flashback to restore, point also change the size of the logs again?

  (2) it will not change the size of the redo log file.  Cannot resize a redo log file...

  I found nothing in the documentation on this subject... Where my question...

  Appreciate your time taken to answer these questions...

  Kind regards.

  Thank you

• Help with Muse database

  I need to create a few sites of small database activated in Muse which can be then be converted to PhoneGap applications (Android and iOS).

  They are not too fancy.  Less than 30 fields, 1 table and nothing fancy in queries.

  Any help on which db to use and how it connects to would be much appreciated.  I've used SQLite some and you have more than 20 years with Oracle, SQL Server, and Sybase.  Find big differences between the big iron to what I am used and mobile platforms.  As I said, ANY help is appreciated.

  Thank you

  RIck price

  There is no support from the database for Muse sites at this time.

• Question: Adobe Muse CC - Drupal 7

  After the theming a user interface for a website in Adobe Muse CC, you can then migrate the code in Drupal 7?

  Hello

  You might need some additional codes to convert a Muse (or website html) in Drupal7 themes. I found an article that could be useful,

  Convert a layout of the Web site or a model in a Drupal theme - easily! Drupal.org

  Let me know if you have any question.

• 11g Question: Stand alone database vs single node cluster

  We are about to create a new 11.2.0.3 database that will eventually become a 11.2.0.3 in cluster database. Our host servers are hardware IBM pSeries AIX 6.1 running. We will use just Oracle Clusterware and not IBM HACMP. We also plan to use ASM for database storage. The plan is ultimately to have a 2 or a 3-node cluster, but currently, we have only an AIX server available to us.
  
  My question concerns our initial approach to the installation.
  
  It is preferable to install the Oracle database as a stand-alone database first and then convert the database to a RAC cluster as soon as we have the material for the second node? Or would it be better to create the cluster with a single node and install and configure grid Clusterware for a single node cluster and then add the second node when the material becomes available?
  
  I apologize if my explanation is not very clear. Any notice will be considered and appreciated. Thank you.

  Hello

  We are about to create a new 11.2.0.3 database that will eventually become a 11.2.0.3 in cluster database. Our host servers are hardware IBM pSeries AIX 6.1 running. We will use just Oracle Clusterware and not IBM HACMP. We also plan to use ASM for database storage. The plan is ultimately to have a 2 or a 3-node cluster, but currently, we have only an AIX server available to us.

  My question concerns our initial approach to the installation.

  It is preferable to install the Oracle database as a stand-alone database first and then convert the database to a RAC cluster as soon as we have the material for the second node? Or would it be better to create the cluster with a single node and install and configure grid Clusterware for a single node cluster and then add the second node when the material becomes available?

  If you are planning to ACTIVE/PASSIVE here database my option:
  {message: id = 10138477}

  If you are planning in the future use a RAC database:
  {message: id = 10142640}

  If you plan use CARS in the future, you can install Oracle Clusterware without worry about licenses.
  Oracle Clusterware can serve to protect any application (reboot or otherwise on the application failure), free of charge, if one or more of the following conditions are met:
  

• At least one of the servers in the cluster is allowed for the Oracle database (SE or EE)
  http://docs.Oracle.com/CD/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ

  If you ARE database Oracle or EA (i.e., not one SE), you can install the product Oracle Clusterware and Oracle RAC (EE to buy the RAC Option) in a node later you can stretch clusterware adding additional nodes, and more database instance.

  You do not need to create a RAC database, you can create a single database (i.e. Non-RAC) on OH software Oracle RAC using DBCA.

  Although I prefer that you create a database of CAR Policy-Managed database... which makes the dynamics and the automatic (i.e. managed by Clusterware) creation/deletion of instances. You will use a POOL with a knot... later you can add more nodes in that POOL... Oracle Clusterware/PAP automatically create undo/redo/instances on the new nodes added to this POOL.
  All this is transparent to your customers of Oracle.

  Oracle Grid Infrastructure for a stand-alone server (Oracle Restart) is an option only if you plan used to one node. If you are using more than one node... Start with Oracle Grid Infrastructure for a Cluster (Oracle Clusterware).

  Hope this helps,
  Levi Pereira

  Published by: Levi Pereira on March 12, 2012 13:58

• How to find the question after hp support assistant opening when the icon indicates the red exclamation point?

  Hi guys,.

  A new pavilion g6 and sometimes get the red exclamation on the HP SA but when I open the screen of the wizard how to find the issue which marked the icon?

  The Assistant has just opened, and I see the screen normal but not extra "Pavilion" to tell me what needs attention?

  Is this normal?

  See you soon!

  Ian

  screenshot of open SA HP...

  

  Hello again, TheHandyCrowd, and ionamartin123.

  Made this suggestion solves your problems?  I was curious about the result.

  I hope that you are having a great day!

• Question: Adobe Muse CC of the trial won't open?

  I downloaded a trial of Muse - try before you buy. The trial will not open and I get a message 'Adobe Muse CC close unexpectedly'.

  I work on a mac, El-Capitan v 10.11 with a lot of memory. Any thoughts?

  Move this thread to download, installation, commissioning so that the experts there can help you with this.

  Kind regards

  Ankush

• Questions about Muse's private beta program

  I really want to join the beta program private muse, but I just read this in the terms and conditions

  9. export restrictions.

  Licensee acknowledges that the preliminary of the software licensed under the terms of this agreement is subject to the laws of export controls and regulations of the United States and other countries. Licensee agrees that it will not export or re-export the beta software, any part thereof, or any process or service which is the direct product of the beta software to any country, person or entity subject to restrictions on the export to the United States.

  This means that if I create a site using the software I can not export it and load it on a public Web site?

  This refers to the application of the Muse herself, not the websites created with it. However: when you sign up for the beta, you also sign a confidentiality agreement. This means that you are not allowed to look at the features and changes to the Muse outside the beta community. So, if you had been part of the beta program before sensitive design had been made public and you have published a website using the beta version, it would be obvious that the delicate design has been added. This is a great example of course and not all additions are very common, but you get the idea. Another reason is that betas are alpha and beta quality, which means features may not work properly, or is sometimes fallen or changed substantially before the public release. You can publish to test sites, of course, because you sure everything works is the main reason for the preliminary program.

  I hope this helps.

  David

  Creative muse

• Typekit question in Muse

  Hello

  I wonder if you can help... Please can you let me know why I cannot access with Muse Typekit when I have a 'portfolio' account and have not exceeded my allowance? Typekit tells me that my account has no access to it, but this should not be the case? This seems to have happened overnight?

  Any information appreciated!
  

  
  

  See you soon

  Vicky

  Hi Vicky,

  I'm sorry that you trouble with that! Please email [email protected] with the Adobe ID you use for Muse and Typekit, so we can take a look at your subscription information.

  Thank you

  -liz

  Adobe Typekit

  Technical support Manager

  [email protected]

• Adobe Muse database

  My client wants to have a database through its website. He wants to know all the users who enter its Web site.

  In addition, he wants to know all the e-mail addresses that subscribe you via his contact form.

  Does anyone know something? I'm really nervous. I need to have an answer.

  Thank you...

  Analytical Google gives you the best stats of the site for where the visitors of your site and much more.

  As for the e-mail contact form, there is no way to track other that manually keep track of them. I suggest to use a provider of third parties such as JotForms or WooForms form.

• Question about muse/catalyst

  I am a designer and my client wants to use BusinessCatalyst so I can design their site in muse and push live but they want the option for users to connect to their accounts - is it possible with muse/catalyst?

  Hello

  Yes BC, but only on the plan right and not something that Muse will be able to take care of.

  You must implement securezone, sign up for access, dial-up connection, then a members to consult their accounts and what the customer wants.

  You can implement without programming, but it will not work or look nice, but possible. Once again, not through good Muse.

• Question Menu Muse

  I create a website for a company that has a portfolio section. '' Portfolio '' is referred to as a main category, with a drop of 5 sectors (education, health, etc.). There are about 3 projects by market sector (child pages). We do not want to have a preview for each sector of the market page, we just track a link to the first draft of this market sector. I created a nav sup on the first page of the project to post a link to additional pages. I don't want the nav sup visible in main menu (which is not because I "exclude navigation page".) Thank you and looking forward to your help as soon as possible.

  Hello

  Looking at the idea you are trying to achieve, I suggest you go to menu manual.

  Try to create menu manual where you can manually create the Main and Sub, children and brothers and then you can link to any page you want for them.

  Do this by using the Menu native Muse can be complex.

  Thank you

  Sanjit