question: webworks upgraded to 1.0.3.8 SDK version, "file not found" error on cmd at the launch on Dev-alpha 10.0.6
Hi all
I have updated the Webworks SDK to its new version 1.0.3.8. The applications have been installed successfully in the previous version... now, when I'm working on that, I am faced with a question saying failed to create the application process: no such file or directory. at the command prompt (start the emulator of the ripple, once packed and signed with success).
I checked the credentials files, debugtoken file, bar etc. The script src that I am referring is also correct.
Thank you.
Is resolved now. I upgraded my bb device - 10.0.9 and everything works fine
Tags: BlackBerry Developers
Similar Questions
-
Beginner question: get the file not found error, when the file exists
I'm in developer edition Coldfusion9 on Ubuntu 10.10 x 64. I followed the tutorial found here. So far, I was able to do everything with the exception of the visualization of my pages in the browser. When I try to view the page, it gives me the error shown below.
I have been using cfEclipse to build pages and I followed the instructions as much as I can, the difference is that I replaced the paths of Linux for windows those.
Thanks in advance
Error occurred while processing request File not found: /home/forrest/workspace/Learning/Gallery.cfc
Resources: - Check the ColdFusion documentation to verify that you are using the correct syntax.
- Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/5.0 (X 11; U; Linux x86_64; en-US; RV:1.9.2.10) Gecko Remote address 0:0:0:0:0:0:0:1 Referrer Date/time October 11, 10 10:44 Stack trace coldfusion.runtime.TemplateNotFoundException: File not found: /home/forrest/workspace/Learning/Gallery.cfc at coldfusion.filter.PathFilter.invoke(PathFilter.java:90) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.xml.rpc.CFCServlet.invoke(CFCServlet.java:138) at coldfusion.xml.rpc.CFCServlet.doGet(CFCServlet.java:264) at javax.servlet.http.HttpServlet.service(HttpServlet.java:740) at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89) at jrun.servlet.FilterChain.doFilter(FilterChain.java:86) at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42) at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46) at jrun.servlet.FilterChain.doFilter(FilterChain.java:94) at jrun.servlet.FilterChain.service(FilterChain.java:101) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543) at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
grog says:
@David thanks of Watts for the help that I tried to change the port to 8300 that does not work. That makes sense, I think because I have to go to 'http://Mypc:8500 / etc. in order to get to the CF administrator.
This means that content in the/opt/coldfusion9/wwwroot/directory will be served to the top by the url http://Mypc:8500 /.
I.e. /opt/coldfusion/wwwroot/myFirstColdFusion.cfm == http://mypc:8500 / myFirstColdFusion.cfm
Unless you did something to the underscore configeration to change this behavior.
-
upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found
Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.
TT2
-
cc of Photoshop does not open JPEG - error message "file not found" just upgraded to the latest version of photohop cc
I just replaced my 9.5 Raw camera with Camera Raw 9.4, from this page:
Camera Raw installation of Adobe Photoshop CC and CS6 program
It worked, now I'm back in business!
PS. along the way, I installed Camera Raw 8.3 (manual drag-and - déposer), in response to advice on a pretty old thread, and that worked as well.
-
ACS 5.0 to 5.1 upgrade manifest file not found
I managed to install the 5.0.21.9 patch and update 1.2 ADE-OS but when I try the 5.1 install via 'install app local ACS_5.1.0.44.tar.gz' I get the error "File manifest not found in the batch."
This is a debug of the installation:
HOST / admin # app install local ACS_5.1.0.44.tar.gz
You want to save the current configuration? (yes/no) [Yes]?
Building configuration...
Save the configuration running at startup
6 [30662]: application: install cars_install.c [195] [admin]: install initiated with bundle - ACS_5.1.0.44.tar.gz - repo, local
6 [30662]: application: install cars_install.c [209] [admin]: stage area - /storeddata/Installing/.1299257463
6 [30662]: application: install cars_install.c [213] [admin]: get the package to the local computer
6 [30662]: application: install cars_install.c [222] [admin]: Got bundle at-/storeddata/Installing/.1299257463/ACS_5.1.0.44.tar.gz
6 [30662]: application: install cars_install.c [232] [admin]: package of LLU ACS_5.1.0.44.tar.gz
6 [30662]: application: install cars_install.c [244] [admin]: made the separation. Checking input parameters...
3 [30662]: application: install cars_install.c [261] [admin]: missing manifest.xml file of bundle ACS_5.1.0.44.tar.gz
% File manifest not found in the bundle
6 [30662]: application: install install_cli.c [94] [admin]: error message: File Manifest not found in the bundle
3 [30662]: application: install install_cli.c [97] [admin]: error during installation - the Application bundle: ACS_5.1.0.44.tar.gz repository: local ErrorCode:-602I created the TFTPing repository file on the disk: / upgrade and pointing to a directory on the disk: / upgrade. I checked the checksum of the file as it is sitting on my TFTP server and manually extracted the file to verify that the manifest.xml file is actually there.
I appreciate the help.
Looks like there is a problem with the tar.gz file
Copy with tftp can be a problem with large files. can you do the same with ftp?
-
Dear Sir, I have only 1 laptop with the original copy of Windows 7 - [Home Basic version]. This version is very slow, I took the trouble of that, so I want to upgrade to windows 7-[ultimate, proffesional] 8 version of Windows or by online (such as the upgrade of windows 10). But not strictly Windows 10.
Hi Shailabhasaini,
Thanks for posting your query on the Microsoft Community.
According to the description of the problem, you are ready to upgrade to Windows 7 Ultimate. If you want more features than you currently have in your existing edition of Windows 7, you can upgrade to another edition using Windows Anytime Upgrade. Information on prices for each edition of Windows 7 is available as part of the upgrade process Express Windows. You can also go to an electronics store to see prices and to buy a Windows Anytime Upgrade key.
I suggest you to return the article mentioned below and see if it helps you to solve the problem.
Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.
Kind regards
-
webkitVibrate works is not on the latest Webworks and Dev Alpha OS?
My application uses the navigator.webkitVibrate function, which worked very well on the previous OS Dev Alpha as well as on the Webworks 1.0.2.9 SDK.
I updated to 1.0.3.8 and also updated Dev Alpha, and now my app is broken. The vibration does not work. Any thoughts? Do you have this change or are additional permissions required in the config.xml file? Thank you.
OK, I got a response from Github...
It has been moved:
navigator.webkitVibrate ();
... today is...
Navigator.VIBRATE ();
Name of the function changed. I did a text replace through all of the code in my application and recompiled, it doesn't! Thank you very much!!!
-
vifptarget: command not found since the upgrade
I upgraded my camera vma 5.1.0.0 Build build 782391 to 5.1.0.1 1062361 this morning and now when I try to issue the vifptarget command to specify one of the guests in my list as target I get
-bash: vifptarget: command not found
I can see the man page for the command and I noticed that it in/opt/vmware/vma/bin/as well as vifp that works to add or remove hosts.
I tried a logout or restart the device, but that did not help. I tried to add location of the command on my way and that only errors generated.
Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.Can't load ' / usr/lib/perl5/site_perl/5.10.0/libvmatargetlib_perl.so' for module vmatargetlib_perl: libtypes.so: cannot open shared object file: no such file or directory at /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi/DynaLoader.pm line 203.in /usr/lib/perl5/site_perl/5.10.0/VMware/VmaTargetLib.pm on line 10Compilation failed in require /opt/vmware/vma/sbin/touchSession.pl line 12.BEGIN failed--compilation abandoned /opt/vmware/vma/sbin/touchSession.pl line 12.. / vifptarget: line 185: back: can only 'back' of a function or an original scriptSomeone knows what's the problem with him?
Thank you
You can try:
1. from the vMA console, open the /etc/bash.bashrc file in the vi editor.
2. Add the following lines at the end of /etc/bash.bashrc
alias vifptarget = ' source/opt/vmware/vma/bin/vifptarget '.
source/opt/vmware/vma/bin/completion_vifp
source/opt/vmware/vma/bin/completion_vifptarget
source/opt/vmware/vma/bin/completion_vifs
export LD_LIBRARY_PATH = ${LD_LIBRARY_PATH: + $LD_LIBRARY_PATH :} / opt/vmware/vma/lib64: / opt/vmware/vma/lib}
3. run:
/etc/bash.bashrc source
-
WLC4402 - Questions to upgrade the AP and controller
Hello
I just upgraded an AIR-WLC4402-12-K9 to version 7.0.98.0 of the software, and I have a few questions-
1. I have no APs to connect yet but when I do I'll have to check what software they run and perhaps demote the controller to get access up to v7 points? To join the WLC v7 since v3.2 I had to make a few intermediate upgrades and I wonder if I have been a little premature and should have done updates after the APs have been associated, has new software pushed from the controller and then performed the steps in upgrade of WLC so the WLC and APs were synchronized in terms of software.
2 - the memory usage is sitting at 60% with no associated APs. I have just connected 4402-12 running 5.1.151.0 and he's sitting at 33% use of memory with associated access 11 points. Have I spent in a too recent version for this controller? What is a figure of the memory use of a 4402?
Thanks in advance,
Jason.
Jason,
A question. You should be fine. When the AP detects the WLC, it will do a code audit. If this isn't the right code, it can extract the correct image of the WLC. As long as the AP you are supported in 7.0, the recovery on the access point image won't matter.
For question 2. sounds of 60% of normal for 7.0, depending on the amount of memory is on the device itself. I woulnd't ' t be too concerned about the memory usage until you points upward in the high 80 years.
See you soon,.
Steve--
If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.
-
Strange question after upgrading RAM on Tecra M10
Greetings gurus,
Pleeeaase help...
I recently upgraded my M10-PTMB1E to 8 GB of RAM of 2 GB.
My bios sees 8GB, Windows tells me I have 8 GB installed but 3.8 GB usable, it checked with a boot CD. Then, I pulled one of the external 4 GB chips and replace the 2 GB in. Windows detects the 6 GB.
I tested the RAM with memtest and these two circuits passed (although memtest is only 4 GB)
I thought it would be a case of updating the BIOS, but if I run the .exe files in 20091103164158-bios, bios-20091104152403 or the bios-20091104172541, I get an error saying "this computer is is not supported.
Could someone please tell me: -.
(1) this machine does really take 8 GB
(2) if so, what changes should I do so that he can use all the 8 GB (unless of course the VGA)
(3) what the BIOS update do I needThank you for your help
Hello
I n t have this model of laptop, but I'll try to help.
# Yes, this laptop model supports up to 8 GB of RAM
# Perhaps this document will help you http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm
# In general you don't need to be. Just if you want to you can update the BIOS, but the old one should be OK. Just make sure that you are using compatible RAM modules. -
Satellite A350D - 20K - Question about upgrade second HDD + Temperature
I have a question about my laptop. I have notticed it is a second location of HARD disk on the bottom.
Is it possible to use this to increase my storage?
And if yes, how do I do that? I don't see all the connectors.
What type of HARD drive to use in case it is possible to use this slot machine?My second question is on my laptop to be very hot after a short period of use.
I installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees.
He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.This does not seem normal to me. I tried to clean the vents with compressed air, but it has not made a difference.
I searched on the internet how to take the laptop part for proparly cleaned TI.
But I can't so I'm looking that destroy it.This could be the cause and more importantly, how can I solve this problem?
Tom
The second HARD drive bay contains the HARD drive connectors?
If Yes, then you can use a SATA 2.5 HARD.
If there are no connectors, then you will not be able to use the second HARD drive> I have installed speedfan to record the temperature. When I start the laptop, it already is between 45 and 50 degrees. He stayed there for half an hour and then it starts to get warmer. When I start to use the laptop for anything, it triggers to between 70 and 80 degrees.
CPU and GPU produce a lot of heat. The heat dissipation is always created then there s nothing unusual that the temperature rose to higher level.
You can change the settings in Win 7 power management. You can set the CPU to lower performance and can increase the activity of fan, which will help lower the temperature. -
Satellite A60-131: Question about upgrade RAM and HARD drive
I have a Toshiba Satellite A60 S-131, bought 2 years ago.
I want to know is it possible for me to upgrade (internal) for a superior ability to HDD 40 GB HARD drive and update my RAM to 512 MB on the rise.Also I already inserted a 256 MB DDR RAM in the empty memory slot almost 1 year ago.
Help will be appreciated.
Hi Pranjal,
You can definitley upgrade your hard drive for a larger version. You should find that a 80 or 100 GB will work fine. You should make sure that you get you a new disc with the same physical characteristics as you existing. The following link will help you remove the hard drive.
http://irisvista.com/tech/laptops/ToshibaA65/satA65_1.htmYou can also get a new hard drive with a more rapid rotation speed (5400 RPM or 7200 RPM).
I think that the maximum RAM for the A60 is 1.25 GB which includes 1 X fixed module (I presume yours is 256 MB, which means that you can install an additional module with a capacity up to 1 GB. Available in capacities of 256 MB, 512 MB and 1 GB of RAM modules.
Kind regards
-
Equium A60: Question about Upgrade DVD - RW
Hello
Can anyone recommend a dvd r/w upgrade, internal or external, so that I can copy DVDs. If I go for the internal upgrade, it is easy to install?Thank you very much
Simon
Hi Simon
External drives are a little cheaper than the slim laptop drives.
In addition, you need to know that not every reader of the laptop can be used in your laptop because master\slave\c-salt settings. These settings cannot be changed, as on an external drive by changing the position of the rider.
But external drives are not very mobile and so many people don t like to use these external drives. But in my opinion it is not very important, because if I want to burn media I do at home.However, in the user manual, you should find compatible readers FRO your unit.
My user manual contains such information.Then take a look in this document or ask the service provider in your country assistance. Here, you can order this disc.
-
Equium M70: Question about upgrade graphics card
Is it possible to upgrade this machine (below spec) for best graphics preformance? Read past postings left me little hope. All the advice sensible word be very appreciated. Thank you, Scott
Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301 - 1519)
Language: English (regional setting: English)
System manufacturer: TOSHIBA
System model: SATELLITE M70
BIOS: Ver 1.00PARTTBL
: Processor Intel (r) Pentium (r) M 1.73GHz
Memory: 502 MB of RAM
Page file: 456MB used, 772 MB of available space
Windows Dir: C:\WINDOWS
DirectX version: DirectX 9 .0c (4.09.0000.0904)
DX setup parameters: not found
DxDiag Version: 5.03.2600.2180 32 bit Unicode------------
DxDiag Notes
------------
The DirectX files tab: no problems found.
Display 1 tab: No problems found.
Sound tab 1: No problems found.
Music tab: no problems found.
Input tab: no problems found.
The network tab: no problems found.--------------------
DirectX Debug levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (detail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (detail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (detail)---------------
Display devices
---------------
Name of the card: Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
Manufacturer: Intel Corporation
Chip type: Intel(r) 915GM/GMS, 910GML Express Chipset
DAC type: internal
The device key: Enum\PCI\VEN_8086 & DEV_2592 & SUBSYS_FF041179 & REV_03
Display memory: 128.0 MB
Current mode: 1280 x 800 (32 bit) (60 Hz)
Monitor: Plug-and-Play monitor
Monitor Max Res: 1600,1200
Driver name: ialmrnt5.dll
Driver version: 6.14.0010.4497 (English)
The DDI Version: 9 (or higher)
Driver attributes: Final retail
Format/driver Date: 07/02/2006 08:56:16, 45697 bytes
Would be WHQL logo: Yes
WHQL Date stamp: n/a
VDD: n/a
Mini VDD: ialmnt5.sys
Mini VDD Date: 07/02/2006 09:04:34, 1399615 bytes
The instrument identifier: {D7B78E66-66D2-11CF-5863-0EDFA2C2CB35}
Vendor ID: 0 x 8086
Device ID: 0 x 2592
SubSys ID: 0xFF041179
Revision ID: 0 x 0003
Revision ID: 0 x 0003
Video Accel:
Deinterlace caps: n/a
Registry: OK
DDraw status: enabled
D3D status: enabled
AGP status: Not available
DDraw Test result: does not work
D3D7 Test result: does not work
D3D8 Test result: does not work
D3d9 Test result: does not workI have the Satellite Pro M70. Update graphics on laptops is not generally possible. Perhaps CPU but graphics card. I really put t believe.
Can you imagine what happen inside the laptop if the Exchange was possible?
-
Re: Satellite L450D-11W-Question on upgrade
Hello
I've had my Toshiba Satellite L450D-11W laptop for about a year now and I play a lot of games. It has AMD Athlon x 2 Dual Core, 4 GB RAM and Windows 7 Pro (32), but it tends to create lots of lag and slow loading for the games I want to play. I was wondering if it was possible to upgrade my computers laptop AMD Athlon Quad Core or Quad Core Phenom processor.
The thing is, it would be compatible? Wouldn't make much difference? Where can I buy products from processors for laptop? I'd be happy for some answers or advice.
Thank you.
Please check this Toshiba document initially - http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
Maybe you are looking for
-
My ESPN widget has stopped working on my iMac dashboard?
-
Qosmio G30-145: RAID1 is degraded - KRC RAID configuration error
I made a few mistakes... I installed the German version recovery dvd OP and during the installation of my foolness I fact also (mirrored) HDD = HARD drive... something like that...now there is a denunciation of the BACK: (if I wanted to get it back o
-
You can downgrade a dv7-7292nr WANT to win 8 for win 7?
I tried once but it kept hanging up. I couldn't find the drivers.
-
Windows 2010 Mltipoint server audio problem...?
use windows 2010 multi point server, here I found 2 types of modes IE maintenance and Normal mode, mode Normal mode can hear audio, but where as in maintenance mode am unable to hear the device detects audio and audio also do not, so I need audio in
-
can not install sp3 I can do updates, how do I get it now