Windows 2010 Mltipoint server audio problem...?

Similar Questions

• Windows 2008 R2 with audio problems - No Audio output device detected

  We are always on the 4.0 update 3 and will move to 5.1 here in the coming months, but we are testing a new environment of Citrix xenapp on 2008 R2 servers and noticed that it is not a sound card. On our 2003 32-bit servers, there was and we have audio broadcast to their thin clients, etc... The upgrade of vmware with vmware tools 5.1 9 will provide a fix for this or is this a known limit? Everyone fell on this? Thanks in advance.

  There is not its virtual card in ESX, the remote Protocol is handling that, in this case RDP/ICA/HDX.

  Linjo

• Windows 8 IDT Beats Audio voice cracks on HP Pavilion m6

  Hello
  I recently upgrade my m6-1008tx HP Pavilion Notebook PC Windows 7 to Windows 8 Pro.

  But there is something wrong with the audio device.

  When I listen to music or watch video, the sound lags or get cracks sometimes.

  This loud noise really destroy the IDT Beats Audio.

  I spend my IDT audio driver for 6.10.6417.0 (sp58532.exe).

  This problem about the pilot, or the sound card?

  Hello

  Please check this post:

  http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio-e-g/DV6-6145dx-Windows-8-Pro-beats-audio-problem/m-p/2158989#M30838

  Kind regards.

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Audio problem with Windows 7

  Hello

  I have successfully upgraded from Vista to Windows 7 and I'm very happy with him... except. Audio glitches!
  With Vista, I have not had any audio problems but now with Windows 7 I. With the help of the dpc latency checker, I disabled all the drivers I could disable but no result.
  Can someone help me please?

  Hello

  What model of laptop do you have exactly?
  Have you installed Win7 its the most recent driver for your laptop model?

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• Audio problem in Dell Inspiron N5110 after the migration on Windows 8.1

  Hi all

  I installed the latest IDT High Definition Audio drivers available on Dell Support Center for windows 8. After you have installed everything works well, if I use the internal mic. When I use an external mic, after activating Jack microphone, reading of modified record device status "currently unavailable". When I use the internal mic, it works well. I don't know how to solve this problem. Early on I use this laptop, it works perfectly except audio problems. Please share a solution for this.

  Thank you

  Thanks for the reply. But Jack mic works well. I need active Rec.playback. When I activate Jack mic and record playback device, then change to "currently unavailable".

• Windows Media Center - audio problem on recorded TV

  My PC (Vista Home Premium) is connected to a widescreen TV with a HDMI cable and antenna lead.  Since we had in 07 big sound worked to record TV Live hi-def with Media Center and play on TV.  Suddenly, probably due to the recent update of windows Media Center, the audiocassette see the TV does not work.  It must be a software bug in Media Center because I can watch internet programming on the TV and the audio works fine.  Even Media Center sounds play fine.  Also the TV recorded see fine audio playback on the PC monitor, the only problem is on the TV. Does anyone have this problem or any idea of a solution?

  Hi Jwphl,

  Try to change volume settings and see if that fixes the problem.

  1. double-click on the icon of volume control main windows in the taskbar

  2 options-> properties > look for the choice of the mixer device.

  3. Select your tuner > check all boxes

  4 ok

  If this does not work, try the system restore and then install the updates manually one by one.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Audio problems in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Low audio problem Windows 7

  Hello

  This is my first time to a post here, so I'll get to the point.

  So, recently, I just had a virus on my laptop, everything is resolved except my audio problem.

  I had to go into "Safe Mode" while the virus was LURKING in my laptop, I had deleted some unwanted files

  It comes from the virus.

  ACCIDENTALLY, I deleted half of what was in my "common files" folder witch was located in:

  C:\Program Files\Common Files

  I have still a few other folders inside this folder... I used to have a lot, and I think that some of them were important.

  Only after that when I rebooted my computer, I realized that my audio seemed low. (My volume was 16% and it is always

  the volume loud enough and perfect for me).

  Also, YES, I tried the troubleshooting method everyone does, and it is always at low volume.

  It does not solve the problem. The same day, I caught the virus, it was withdrawn after a few hours, so all is well.

  Well, there you go, that's my problem. Please any help would be appreciated!

  Hello

  Thanks for the reply.

  In this case, I would say that you want to run system restore to recover all the files. After that, if you have any problem of virus.

  Let us know we will certainly help you.

  Refer to:

  http://Windows.Microsoft.com/en-in/Windows/system-restore-FAQ#1TC=Windows-7

  Note:

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I hope this helps.

  Kind regards
  Anusha

• Windows 7 Audio problem IDT plays through speakers and headphones

  I recently took possession of old Windows 7 Dell Inspiron N5040 my brother who runs the audio driver IDT HD Audio, the problem is that even when headphones are plugged in, the computer still plays sound on the speakers, I tried to uninstall and reinstall the driver, update the driver software and I still cannot fix. I thought that maybe the problem could be fixed with sound in the Control Panel, however, I can't find the device labeled "Headphones", only two devices listed are "Speakers/headphones" and "helmet of Communications." How can I do so that the system only plays sound through speakers when the headphone is not plugged and only plays the sound through the headphones when they are?

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to play music through the headset and it still plays sound to speakers.

  To better understand the issue, please send us the following information:

  1. This headset works with other computers?
  2. Have you tried to use other headphones? The problem persists?
  3. Are you facing this problem with a particular application or does with all applications of music?

  I suggest you follow the steps described in the article below and see if it works:

  Open the hardware and devices Troubleshooter

  Tips for solving common audio problems

  You can also check the suggestions provided by Aziz N December 13, 2011 and the Mike991 , February 12, 2012 in the article below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/sound-playing-through-Laptop-speakers-even-when/07289d2c-BF3B-4395-9c6f-dfe0c5151821

  Hope this helps, get back to us if you need further assistance for Windows.

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• Windows server backup problem

  whenever I start a backup full on the standard (windows 2012 R2) server, I get the following error "the backup generated an exception.

  the backup was working earlier. y at - it a windows update that may have damaged the backup procedure?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I fix problems with all-in-one printer when I have Windows 2010? There is no driver for it.

  My computer crashed. Replaced the hard drive and installed Windows 2010. Now, the scanner does not work. Impossible to download a driver because HP is not Windows 2010 drivers listed for download.

  Sorry for the confusion, the forum here is not connected to the system of HP support and volunteers here (like me) do not have access to the information provided to the HP support unless include you in your message.

  I suggest that you unplug the printer (if you use USB to connect), then download and install the driver here.  Do not connect the USB up to be instructed by the installer.

  After the installation is complete, apply the update here.

• Tecra S1 under Windows 2000 Professional external display problem

  As I can't answer in the original thread (1831), because it is locked, I put here my answer to the answer of the Quad.

  Quad first wanted to know if we have installed the Tecra S1 on a recovery CD.

  No, we do not have. We have created an image that consists of an unattended installation. It is installed from a Windows 2000 RIS server.

  Quad also said that the Fn + F5 is enabled after the installation of the utility Hotkey for display devices.

  We downloaded the hotkey utility, but when we tried to install it we got the error message you "Driver not found" and suspended installation. We have installed as a user with administrator privileges.

  We do something wrong, or this utility owes something to be installed as well?

  Kind regards
  Harro Hofman
  Material specialist

  The Netherlands.

  Hi again Mr. Hofman,

  First of all I must tell you that this is a typical problem. AFAIK Tecra S1 comes with the Professional Windows XP Home edition and optionally with W2000 professional. This two OS has been tested and Toshiba offers all drivers and tools to Toshiba download website.

  It will be interesting how you created this image. What was the basis for this image? You are installed to the first completely Tecra and after created image?

  Have you had problems before the creation of the image?

• Audio problems

  Hi, I have audio problems! I downloaded Skype on my windows laptop 10, and I have audio problems with only my Skype. I checked the audio setting on my laptop and they are very well, I tried to save regularly, and it was perfectly good. I checked the audio on my Skype, they seem to be well, but does not record the microphone. When I talk about the green line of volume is not hear me, and move. However I tried to snap my fingers just above the mic, and if I did it really hard two or three times the volume of the green line would move just really slowly, however when I spoke into the microphone it is not. I deleted and downloaded again, but has not fixed the problem and I don't know what to do. None of the parameters have changed, but when I checked my setting of the laptop, Skype was not one of the apps listed as the microphone (and I don't know how to change.) In fact, when I checked all my settings of the computer, Skype did not appear for the use of microphone, speakers or camera (but I get only problems with the audio.) Please get back to me as soon as possible to help with suggestions! I use Skype to talk to family and work, but also to stay in touch with teachers and take classes.

  Please, run the diagnostic tool (32 bit) DirectX. Run dxdiag.exe (Start - Run or Win + R key), then press on enter or click 'OK '. Once the diagnosis is complete, "save all information...". "in a text file. Please attach this file to your message.