Questions about airplane Mode

Similar Questions

• Questions about maintenance mode

  I have some curious (probably dumb) questions on the service mode (esxi worm 51).

  • What is exactly?
  • What happens if you run the patch similar to ' esxcli software vib /vmfs/volumes/datastore/patch_zipfile.zip d install "without putting it in maintenance mode?
  • What happens if you put maintainece mode, install the patch, and then out of maintenance mode before restart? The reason behind this is so that the virtual machines will autostart.

  These are just curious of rhetorical questions.

  Thank you!

  Arch

  All the maintenance mode has really is sure no VMs are running. In an environment of DRS, VM will migrate automatically away, basically saying maintenance mode "do not put a machine virtual here, is about to have some work." Without the DRS maintenance mode will fail and advise you to move the virtual machines yourself.

  Some patches require no maintenance mode and install fine. Those who demand the it will error and refused to apply without maintenance mode.

  In the third scenario, the machines will be autostart

• Question about screen mode > Normal

  I'm relatively new to InDesign and just can't work on why I see these blue bars next to a block of text, I don't see it when I pass in preview mode. Any ideas? Sorry if this is a fundamental issue.

  

  Hi Mark,

  you have enabled "Style substitute highlighter", a new InDesign CC 2015.3 device which would indicate if there is a difference between the used character style or a paragraph style and the actual formatting characters or the whole paragraph.

  You can enable/disable for example. in your paragraph Styles Panel or your character Styles Panel.

  BTW. The blue bar at the edge of your text block indicates a substitution of the whole paragraph.

  See also:

  How can I disable the blue highlighting which brand do not paragraphs of text styles?

  HP http://indesignsecrets.com/InDesign-CC-2015-3-Update-brings-bug-fixes-Small-Improvements.p

  Kind regards

  Uwe

• Questions about an average of response spectrum and frequency of feeding mode.

  Hello

  I have a few questions about an average of mode. When I generate a sinusoidal signal from one output to two input channels channel to see if my DAQ card works well and vector averaged in the power spectrum for DFT, the amplitudes was different from the previous one of the amplitude, which was supposed to be 1 v peak. They range from 0.5 v to 0.6 v peak. When the calculation of the average model is RMS, the amplitudes were close to 1. I wonder what are the fomulas of RMS and average vector. Does that mean that I could not accurate if I use an average of vector? In a time of frequency response, why I coherences of difference and the amplitudes using the vector and the mean quadratic value?

  Thank you

  Ningyu

  rico1985,

  The differences in modes of generation are as they sound: 1 sample output only a sample writing, N samples will be released however many samples configure you for each entry, and the continuous samples released samples continuously until a specified user action happens (you press the stop button or a logic that you created gets fulfulled). The range of Signal output allows you to set a ceiling high and low level of your output signal and it only affects the quality keeping in this beach. Timing to set a deadline for the time between the acquisition of the sample. If a new sample becomes unavailable before the timeout setting, you will get an error. This is useful for looking at a network, because if the network goes down and you stop getting data from a machine and then you would like to know about it. I point you to those videos that are short tutorials on how to make the most of these actions in SignalExpress.The SignalExpress 3.0 Help file is also your first point of contact for all your questions on getting started. These two resources should get you up and running in SignalExpress in no time. (either by the way all your questions answered using these resources) Bravo!

• Lost iPad in "airplane Mode."  The 'Find iPhone' feature work?

  I left my iPad 2 Air in the plane by mistake.  The iPad is in flight mode.  I used the function "Find iPhone" and put the iPad in 'lost' Mode and 'Play Sound Mode '.  My iPad has Wi - Fi.  Lost iPad functionality will work in airplane with Wi - Fi mode?

  Have you tried to contact the airline to check if someone has found? But to answer your question: no, that won't work. Airplane mode disables all related to connectivity.

• Airplane mode turns off automatically... FIXED. Software problem.

  I have a DV-6 desire and when I put it in Airplane Mode, it will automatically turn off about 5 seconds later and connect to the internet.

  Clues as to what is happining? Is the NSA / FBI / DHS / FEMA go after my laptop or something?  (Yes, that's sarcasm... but help me solve it.)
  Thank you.

  -Sleeper

  Hello

  1. Turn on airplane mode to turn off all wireless communications.
  2. Standby, Hibernate, or shutdown of the PC.
  3. Wake the PC from sleep/hibernate implementation.
  4. Disable airplane mode to allow all wireless communications.

  If you have activated the airplane mode before that wireless devices are initialized, devices will remain off, even if the airplane mode is disabled.

  1. Slide into the right edge of the screen to bring up the menu of the bar of charms . (You can also bring up the menu bar of charms using Windows key + C).
  2. Press or click settings.
  3. Tap or click change laptop settings.
  4. Tap or click Wireless.
  5. Press or click the device off to reactivate.

• Questions about Satellite P10 554

  Hello

  I have 2 questions about my P10-554. I read on this forum but can't find anything that helps out me.

  First of all:
  When I try to turn the unit off after working, using even the closing of xp function or the power button, windows normally quit, but when it needs to turn off just reboot again. If I repeat the closing down directly after this restart, normally it turns off.
  This problem occur only when I use the power supply in battery mode.
  I can't say that to me...

  Second:
  I have a mini PCI Wlan card for my unit, works very well, but I wonder if it is possible to get the Wlan switch switch work whith it? Or is it only possible whith some special maps? It is not so important, but it would be nice to know if there is a trick or something to get the switch used.

  Best regards
  Gabbagandalf

  Hello

  Regarding your first question;
  I'm a bit confused of m are sure you n t use the restart option?
  I never noticed anything like that on my laptop

  Usually, if I use the Shut down option, I can choose between standby, hibernation, restart and shutdown. If I use the stop that the laptop turns off as it should.
  Maybe it's time to s for a reinstallation of the OS?

  On the second question.
  The switch on the left side for laptop was designed and developed to pass on the WLan card antenna.
  Usually, you should be able to use this switch and to toggle WLan card functionality

  Don t understand why it should not work?  :|

• Turn on airplane Mode is not stopping being delivered text

  Hello!

  I tried to work around this problem for hours now, and I would really appreciate the help! This is my first time on the Apple Support post, so please bear with me while I try to offer as much information as possible.

  Exactly two hours ago I accidentally sent an audio recording embarrassing someone. However, as I acted quickly, I was able to activate the mode of the aircraft while it was still trying to send him, and the bar went from blue to green.

  However, two hours passed, and the audio is still trying to be sent. It does not say that it has not been delivered, and I fear disable airplane mode and try something else in case the second I do audio recording are sent.

  If it makes a difference, the bar is pretty close to hitting the right part of the screen, but it isn't completely there yet and has been in this post for what feels forever now. It says, "sending...". "at the top.

  In addition to having kept my phone in airplane mode all this time, I also restarted (pressed the lock button on top) which made no difference.

  In addition, Wifi and iMessage are disabled, while I turned on the MMS messaging to see if this changes nothing. (He didn't).

  Please help me! How turning airplane during the sound recording mode (it was only a second long) was still in the sending process has not prevented to be delivered? (It's still in "sending... ("process.)

  Any ideas about what I can do here?

  It is in Quebec to send and end the process the minute it reconnects to a network. It's design in case, for example, you've lost the network connection to a time for some reason, your message will resume sending as soon as possible.

  I have no idea how or even if you can stop it now that never turn your phone on. You could try powering on and outside, or try a reset. In the extreme, you can go into the General settings and clear content and settings, wiping everything off your phone and then restore your backup later.

• Training app works when airplane mode is selected?

  Well, that's the question. Fact the watch loses most of the features similar to an iPhone when it is in airplane mode?

  Hi Bruce

  The app of training can still be used when Apple Watch is in Airplane Mode (and the activity app also continues to operate).

  When estimating the results of any training registered during this period, the watch will rely on its own sensors, because it will be impossible to access additional data that might otherwise be available from the paired iPhone (for example information of distance and speed calculated through location Services / GPS).

• HP ENVY Notebook m6: Airplane Mode turned off my internet connection. How can I stop this from happening?

  Airplane mode resumed my internet for several weeks, then stopped working.  No internet service.  Said the repair man when the airplane mode takes longer, sometimes internet service cannot be restored.  Why is-mode plane capable of replacing my internet service?   How can I avoid this?

  Hi there @Carolyn42,

  Thank you for visiting the Forums HP's Support and welcome! I read your message on the HP Support Forums and see that you are having problems with the airplane Mode. You mentioned that the phone automatically goes into airplane Mode.

  I'd be happy to help you. If none of the steps I provide in this post help you solve the problem, please indicate this post as one acceptable Solution to another with the same question can find the solution.

  I found a document for you called airplane Mode a Forums Post on the Microsoft Community website called Airplane Mode will not turn off - WiFi will not start-up. TracyDillon on the post on the Forum said, "I have a button wifi real on top of the right side of the keyboard after F12, I pressed on that and off airplane mode and then allowed me to turn on the wifi (I did it manually)." And I'm on! "

  Here is another post from the Microsoft Community Website. This one is called hp wireless button mode "change airplane".

  After restarting the laptop you should not have flight Mode more.

  Please re-post with your model number (How can I find my model number or product number?) If you need help, and I'd be happy of this issue of research for you more far. Please show your appreciation by clicking on the thumbs up button.

  Thank you for posting!

  Have a great day!

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• stupid question about UAC

  OK, it's a REALLY stupid question about UAC.

  I have several icons on my desktop. Some of them are games that must be run as administrator in XP compatibility mode.

  I rarely accidentally tried to open the icon, particularly if you use the keyboard to choose what I want.

  Is there a reason if I accidentally open a game that pushes me in height DO NOT hit 'Cancel' if I didn't intend to play the game at the moment, but trying to open something else? Something like a process being left in suspense, memory leaks, or any other reason why I can't Abort to launch the application to the UAC prompt?

  Hey, Slick,

  Clicking Cancel will prevent the running total process if you do not have to worry about the still ongoing services for memory leaks or game, etc..
  I hope this helps.

• A few questions about my new Z5 Compact camera

  A few days ago I bought the Xperia Z5 Compact (and updated the marshmallow) to replace my Z1 Compact and meanwhile read the manual and looked into the camera settings. Now I have 2 questions about the camera.

  (1) according to this manual, it takes an option to 'adjust the color and brightness manually. I rember having seen this option once in the form of 2 sliders, but now I cannot reproduce it more and find more options in the settings. What should I do wrong or overlooking?

  (2) I noticed that I can manually put only iso for resolution of 8 MP or less. When I put a 20 MP resolution, the iso setting is grayed and automatically the value. Is this a normal behavior?

  Thanks in advance for the answers.

  Hi @Rijnton,

  I just tested this on my Xperia X but it runs on Android M, it should be similar to the Z5 Compact (although there may be some differences).

  Color and brightness options may not be available in manual mode, but are for higher Auto and video.

  

  

• Dell Inspiron 17-5748 Airplane Mode is not turned off, WiFi and BlueTooth turns off

  I may have made a mistake in believing Dell had together when I upgraded to Windows 10. I can not connect to any Bluetooth device and no WiFi at all. Laptop remains in Airplane Mode and it cannot be cut.

  I tried all the options I know to correct the problem, except to 8.1, that I can still do since I have had nothing but problems since his arrival at 10 Windows.

  If return to Windows 8.1 is a viable option, even if that would mean reinstall all my programs, I guess it's a solution.

  Worse, it is now is no longer under warranty and I'll have to pay for support. I'm hoping to find a viable solution here.

  The device in question is the map of 1704 802.11 WiFi b/g/n 2.4 mhz.

  Any help would be welcome. This Dell is barely a year.

  Fischenbach

  Update you all your drivers Windows 10 as well? If this is not the case, click on the link below to download and see if the problem still exists. There are also some links below to help you solve your problems of both wireless network.

  5748 Inspiron drivers and downloads

  For Windows 10 wireless home network

  How to enable / disable airplane Mode in Windows 10

  For me, to help troubleshoot, please click on my DELL-Dell-Jesse L and send me a private Message with the number of Service Dell and your Dell order number

• Technical questions about X 1 carbon Touch base

  Please forgive me, I'm still recovering after the shock and frustration generated by dealing with Lenovo Tech Support.

  I recently received my X 1 carbon Touch and I have tried to understand some - I think - fundamental questions.

  As you know, to win 8, Lenovo doesn't have a custom recovery solution / owner. However, there are a score of Lenovo recovery on the machine. I'm /assuming/ this, somehow, can be used through the default / built-in mechanisms of recovery Windows, but I want to know exactly how without necessarily experiencing myself with it.

  In addition, the computer seems to be equipped with a mechanism of alternative stand-by, fast recovery called Intel or something like that. It is enabled in the BIOS and apparently makes use of a hidden partition of ~ 8 GB on the SSD. However, I find no indication of this mechanism working. There are no settings that I could find in Windows. I changed the BIOS to 'Immediately' setting in order to test the functionality, but put the computer to sleep does not seem to generate behavior that is somehow different from regular sleep.

  In any case, I would like advice or information on my questions above. I understand works the thing of recovery fast in order to decide if I want to recover the partition or not. I would also like to know my options I should never need re - install the delivered factory OS without actually crossed the steps. I would also if someone could tell me the best way to get support from Lenovo.

  / * I called Lenovo technical support with these issues. The person sponsor and those to whom I then was sent to had no idea what I was talking about. They had difficulty understanding terms like partition, standby, sleep, resume, and even software/hardware and implementation. It was suggested that my computer may be Intel and Lenovo not... They seemed to really come from an age of the computer. I asked to speak with someone who would have some basics of the machine that Lenovo delivered to me. I find it reasonable. At that time, I was told to talk to a knowledgeable person, I have to pay a fee. Seriously?

  */

  elfstone,

  To find out how to work the various Windows recovery methods, please see this Microsoft Web site:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  The sole purpose of the recovery partition is to work with the "All delete and reinstall Windows" function of Windows 8.  If you have specific questions about the factory recovery that you can't get items from Microsoft, let me know.

  Regarding the plan of hibernation from Intel, as you noted, it takes a partition dedicated to your SSD which cannot be used for other purposes.  The only parameter in Windows is inside the application of arrangements of Lenovo in the power section.  Lenovo calls this function "in waiting for 30 days.  The only thing you can do is it turn on or off.  Here's how works "waiting for 30 days:

  1. When you close the lid, or otherwise put the system into standby mode, the system of standby for 3 hours.

  03:02 hours, the system will wake up and check things like not attached AC, wake-on-LAN not activated, USB device not attached, etc..  If conditions permit, the system will enter wakefulness of 30 days for example deep sleep.  If the system returns in normal mode to 'sleep'.

  3. deep sleep means that the content of the memory is written on the special hibernation on the SSD partition.  It is very similar to the traditional hibernation except what happens faster using methods of BIOS instead of Windows methods.  But this isn't anywhere near as fast as normal sleep/recovery.

  4. the system out of deep sleep when the cover is opened or when you press the power button.

  You have found the BIOS settings, but in fact they are ignored when Lenovo settings (and package of dependence of the Lenovo parameters) are installed on the system.  I don't really know why this design choice has been made.

  Personally, I don't see value in 30 days standby, not enough value to want to give up my expensive SSD 8 GB.  I exclusively use sleep/recovery.  The battery will last several days.  And if I'm going to be away from the computer for a long time, then I'll just stop it.