IAuthor export problems

Similar Questions

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.

• Export problem

  I've been using version of Lightroom cloud for 2 years on a PC and have never had this problem before. LR doesn't let me export the photos I chose. The export menu item is grayed out/inactive.

  Do you mean that the line of export in the top File menu is dimmed?

  

  The shortcut Ctrl + Shift + E does not work?

  Is the [export] grey/inactive button?

  

  You never see the export dialog window?

• import/export problem

  Hi guys!

  I have problem with a full import of 11.2.0.3 database on RHEL 6.4 EE (64-bit). I did a full export of my source as this database

  expdp system/pass COMPRESSION = ALL full = y parallel = 2 = ORCL_EXPORT dumpfile = expfull.orcl.dmp expfull.orcl.log = logfile directory

  and I tried to fully import in an another RHEL 6.4 db 11.2.0.3 with this line:

  Impdp system/pass parfile import.par LOGFILE = orcl.log =

  by file contains:

  DIRECTORY = ORCL_EXPORT

  FULL = Y

  DUMPFILE = expfull. ORCL.dmp

  EXCLUDE = PATTERN: 'IN ('USER11') '.

  REMAP_DATAFILE =

  ' ' / db/db/orcl_vip/userdata.dbf':'/data/orcl_data/userdata.dbf', '

  "' / db/db/orcl_vip/app11.dbf':'/data/orcl_data/app11.dbf' '...

  But each import of time been switched to the previous use of import with a completely different game from the import settings? Why?

  Just to say that I have doubts with parallel parameter indicated in the export script. Because the dump file is probably corupted because it did not divide? (it should be something like dumpfile = expfull.orcl%u.dmp? )

  Post edited by: rootsman

  I found what is right! I copy script import schema to another path to server and I changed to full import. Although I have change the Oracle script looks like just the script name and the version previous run of him no matter what I have change in it.

  So note to myself, always change the name of import script!

• export problems

  Hey guys, I must first say please don't mind my typing. Continuing... I was working on my youtube channel art. When I downloaded the image, the size was not quite right. so I went back and changed. When I clicked on "export to" and when the menu is popped up. I accidentally moved the "px" to the left. and, in doing so, whenever I change the "width/height" another changed by itself, for example, if I had to put 800 width, the height would like height of 1260. his extremely annoying and its starting to drive me crazy. as I have tried to fix this for 4 hours now. not youtube or internet helped me to solve this stupid problem. now it's maybe just me, but you don't blame me. I had photoshop 10 hours ago. I know only enough to creat. do not export or anything like that. If someone can type just 'step by step' how can I possibly fix this or replace where can I change the width without changing height, it would make my day. Thank you.

  You do cela the wrong John. Export as is an end of workflow option designed to be the last thing you do with your image. Image resizing works by changing the dimensions evenly. If this were not the case the image would be stretched or compressed and generally distorted. Try to make this way instead

  (1) duplicate your image

  

  (2) a dialog box opens to allow you to name the duplicate

  

  3) press ctrl-s or s on the keyboard command to save the duplicate.

  Doing this means duplicate you can change without affecting the original

  (4) now resize the duplicate image

  

  (5) in the dialog box, you should disable uniform resizing. Just click on the marked symbol and it then you will change the independent width height

  

  If you do not click the icon it will look like below with a chart showing there is a link between the size and the width changes in proportion to the height.

  

  If you go now to the export as dialog, you can export to the format you set. Perhaps in a future version of export as Adobe will integrate this small icon above.

• Preview and exporting problems when you manipulate still images JPEG

  Not sure if this is the right place to post but I'll have a lot of work with JPEG and MP4 together in Premiere Pro. It is very random. Sometimes it works well and most of the time it isn't.

  For example, when stops the playhead on top a JPEG image is does not show the preview. Therefore, I can't change the still as I can't see the changes.

  I also met problems with Lumetri effect when adding a still. It results from the export process fails with an unknown error, saying that the film cannot be exported. I think that my features of the machine are pretty good manage these files, so I wonder where is the problem.

  iMac running El Capitan 10.11, 3.5 GHz Intel Core i7, 32 GB 1333 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB. Could someone advise me please?

  Jpg seems sometimes to be problematic to the PrPro, and it is often suggested that people use instead of png or psd.

  Neil

• Quality image after export problem

  Hello

  I have a problem of quality after the export of the image. for example in one case, I make a modification, especially at the level of sharpness of an image, after when I exported the JPEG image, there is a large drop in sharpness and more noise.

  Knowing that the adjustment of export level everything is good in quality years 100% and type pour inking of high office.

  NT: the quality of the Exported JPEG image is the same as the quality of the image in the library and not in development tab.

  Thank you

  There are several problems with your settings. The detail panel sharpening (NET ') and the noise reduction controls should only be paid in Zoom 1:1 Mode. The amount of sharpness (Gain), detail, brightness and contrast are too high. Adjustment brush sharpening (NET ') setting 100 is compensated by the noise of 100 (noise), so little local sharpening is applied. Also the moire ' and fringe 100 parameters must both be left at 0 (OFF), because they serve no purpose for the sharpening of the premises. Please try the settings below and evaluate the results in development and library modules View Zoom 1:1. If having the same problem please download the raw export to DNG on Dropbox or other image file sharing site files and I'll try to decide the issue.

  For more help and tutorials in French please look on this link: training for Lightroom, assistance and support. Adobe Photoshop Lightroom 5

  

  

• SWF export problem when you add a new page?

  Whenever I have a new page and export my SWF my SWF and HTML load never in my browser. When I delete the newly added page and re-export it loads without problem. What Miss me? I am running what ID CC 2015 update today 23/02/2016.

  Looks like the first version is cached in the browser? Try to clear your browser cache or export the 2nd version with a different name

• Path pre 14 motion on the export problem

  I created a simple trajectory of an image of flower growing in a bouquet in pre 14. Works fine in the preview. But when their export to MP4 the flower lands in a different location, a little to the right of where it should.  I tried export to HD 1080 and 720 HD, SD 570 480 and quick export to see what would happen. The trajectory is not in all, but the Quick export version. I tried to create an export customized to match the project settings and the flower landed in a place by a stranger.  How can I see what are the Quick export settings? How to export a video of best quality for standard format? Is the first elements 14.1 running on Windows 10. Is that a project is updated standards (not widescreen). 

  I think the problem is, the stills are huge compared to the resolution used in the project settings.

  Why did you choose these settings? You use a Flip camera (or something simular or...?)

  If so could you post a screendump of properties.

  What is the final destination of your film?

• Square-rigged model export problems Mixamo website at Unit 5

  I try to import an exported model fuse via website but my character is with "bugs"... the eyes are exorbitees animations are twisted, as if the character's leg was rubber. Treatment of bone in model with problems on this site Mixamo.com?

  Perfect!  Thank you.    So if you look at the animation file it is set to 'create this model '.  CHARACTERS must create avatars.  Animations should copy!  So the animation 'Avatar définition' set to 'Copy of existing Avatar'.  You'll get a new window asking what to copy from.  Set it to COPY the avatar of Avatar "BanditAssault."

  

• VERY URGENT - export problem

  Hey guys I have a big problem. Today, I put a DVD. I have for this 12 GB of MP4 files high resolution, and I created a Menu with Adobe Encore. I want to burn on a DVD-9 (single layer) - this is why I chose to export an image with the defined size of 8 GB - now that I export the video it has bad quality - CAN YOU PLEASE HELP ME? It is for a customer. Thank you very much

  I want to burn on a DVD-9 (single layer)

  DVD - 9 is one face; double layer. It's called a size 8.5 Gig, but the real GiB is 7.95. You will have a "layer break" with the DVD-9.

  Your HD files cannot be created directly on a DVD. Size of the DVD is SD (standard definition) If your, for example, 1920 x 1080 will be downrezzed to 720 x 480. As says John, according to the length (in time) of the videos, you then set the compression to make it fit. So you have to judge the effect of the downrezzing, as well as compression.

  If you want HD quality, you must go to Blu - ray, not DVD.

• Premiere Pro export problems

  I had problems to export from Premiere Pro with my MacBook Pro with OSX 10.9. My exports fell by executives, sometimes black, sometimes green, sometimes with stripes or patterns of mosaic... I tried to update, I tried installing and reinstalling. I tried to export HD 25 p but I also tried to export settings of sequence and that no longer works. I also tried to use Media Encoder. My original film was HDV. Initially, I was working from an external drive WD with FW800 adapter thunderbolt, but I also tried working from an external drive USB3 and also from my internal drive. It makes no difference. The only 'solution' that I found for the problem was when I exported using a friend's computer.

  Before this problem I used Premiere Pro CS6 version because it was compatible with the editing suites I used at my University. But my project developed file some sort of bug whereby it widened almost exponentially whenever he saved. So it became so big (up to 5 GB) that the computer crashed whenever he tried to auto-save. When I converted the project to a CC project that seemed to overcome this problem, so I continued to work with CC of my lap - top. But then I had problems when I first came to export.

  Hello

  Please launch the first pro and click the option to file on the part superior of the Menu and go into project settings

  File > project settings > General > Renderer

  Change the rendering engine for the reading Mercury (CUDA) engine.

  If you do not get the CUDA option in the drop down menu then quit first pro and install the CUDA drivers from the link below

  6.5.18 NVIDIA DRIVERS

  Now launch Premiere pro and select CUDA.

  It will ask you to remove ads sequences, please do and try to export.

  hope that helps.

  Thank you

  Mohd Naseem.

• audio sync after export problems

  I had this problem, sometimes since starting to use Premiere Pro CS6, and he is now also occur even in the latest version of CC (just updated to 7.2.2 on W7, 64-bit):

  A perfectly synchronized sequence that plays well in his rendering preview loses sync with the sound audio with the video (or audio) after having exported them to mp4. (predefined H.264 format). I tried troubleshooting by deleting all render files, restart the applications and computers, played with broadcasters of media... nothing is.

  It is true that raw footage is be a wmv file. Which I know is not ideal. But what bothers me is that everything is perfectly in harmony to the point of creating the export file. That makes no sense at all. I'm about to counter this change now by separating the audio from the video and make up the difference in frame manually, but it feels bad to do and is a stupid hack for something, the software shouldn't mess up in the first place.

  Any ideas?

  Try to convert the source media to change something more user-friendly.

• Export problems for the creation of insert script

  Version 3.0.04 Build HAND - 04.34
  
  Hello
  
  I'm trying to use SQL Developer to create an insert script for only a certain number of columns in a table, but it does not work for me. That's what I do;
  
  Step 1. View current table with the DATA tab
  Step 2. Right-click in one of the columns and choose 'export' in the menu dropdown.
  Step 3. Export Wizard - step 1 of 3 dialog allows me to choose the Format to INSERT and save it as a single file.
  Step 4. Export Wizard - step 2 of 3 in the column named "Columns" I change the symbol asterix at the columns I want in my export file, using the rocking on broad dialogue.
  Step 5. Wizard - step 3 of 3 hit finish Export
  
  Open my export file, and has a script to insert with all of the included columns, not what I wanted or determined through the wizard process.
  
  Is this a bug or I do something wrong?
  
  See you soon
  Ben
  
  Published by: benton on Sep 3, 2012 15:54

  >
  I downloaded and installed Version 3.2.09 build HAND - 09.30 the SQL Developer.

  The same problem occurs.
  >
  Try to "unload" in the navigation tree. Right click on the table and get him out of there, instead of from the data tab.

  Display the results.

• FLV export problem BY making crops on it

  Hi I create a manufacturing project of intro for my Flash with size: 768 * 520

  When I want to export my computer and go to the setting of render queue in the setting of output module, when I select the FLV or F4V format I get attention icon to the bottom of the window that says:

  WARNING: output file will be reduced by 768 * 520 (1.09 BY) to 768 * 520 (1.0) equals respect constrainst format

  the flv's played well in external player and other video players KM and the size is 768 * 520 but when I import this video Flash video have white crop top and at the bottom of the video (white is background color of my video in AE)

  It seems that something related to the EVEN

  How can I solve this problem BY and prevent this culture in Flash?

  Thank you
  

  OK I found it, I go to the setting of the Composition and change Pixel accpet Ratio of: D1/DV PAL (1.09) to square Pixels

  It seems of quality will not change and I can use it for now

  It will be great, if someone has an idea better