c drive indicates it has reached its maximum of space, but I use less than 20%?

Similar Questions

• Can you tell when a loaded SWF has reached its last picture?

  I used loadMovie to load an external SWF into half less of a main "shell" swf When the loaded SWF playback (it's just an animation) finished, I need to fill in a text field with the word "DONE". The text field lies on the _root, and I need a way to know when the loaded SWF file has reached its last picture...
  
  It would be obviously easy if I had the. FLA of the loaded SWF file because I could write any actionscript code on the last frame of the SWF to fill the textfield _root. Alas, I do not have the source of the loaded SWF FLA, so I need a way to have the "shell" SWF/FLA main know when this loaded SWF has reached its end. Is this possible?
  
  Thank you!!!
  

  DIY_Lobotomy,

  > The reality of my situation, it's that there is only a 'menu' of sorts that
  > Gets load in "contentClip". This "menu" has a bunch of links.

  So far so good.

  > When you click on it, each link load a DIFFERENT swf file in 'contentClip '.
  > It's THESE sovereign wealth funds I need to see the end of.

  It is always correct.

  > There is actually more than one, so they're not exactly being
  > loaded directly from my main movie, because they are actually loaded
  > based on a link that is clicked in the movie that is currently loaded
  > in "containerClip".

  The concept is still the same, no matter what happens. Any depth the
  a clip-expenses-other chain goes, you have to keep the notches on each link in the chain.
  When the last link has loaded, you will be able to make your object reference
  in this clip. This film clip - because it's an instance of the
  Class MovieClip - will have the properties _currentframe and _totalframes.
  You'll just check * that * cliip instead named properties
  contentClip in my own example.

  You can run a loop using onEnterFrame or, if you prefer, with setInterva().
  Is not little matter, as long as ask you repeatedly deep
  clip to test its current image against its last picture (this assumes that)
  the test clip is a linear animation matching the end to his
  last image; otherwise, you could check against this arbitrary _currentframe
  The frame number).

  > I hope it was not too complicated! You always have a solution?

  Not too confused to understand, but it might be confusing to the road
  through in practice. Not to be confused, actually, but meticulous... you will
  be careful with your multiple paths. The nested clips are very similar
  folders nested on your hard drive. The instance names relate to the
  folder names.

  Now, if this menu is not an instance name you condition - or if
  the forks on the way has an instance name you can't control - you can
  always refer to nested clips. If you test your file in the
  Debugger Panel, you will see all the instances arranged in hierarchical order.
  You will see that automatic instance names are provided (something like
  ("instance1", "instance2", etc.).

  David Stiller
  Contributor, how to cheat in Flash CS3
  http://tinyurl.com/2cp6na
  "Luck is the residue of good design."

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• my iphone 5s has reached the maximum number of account creation free icloud. What should do?

  Guyz. Please help me to create an account and not to give bank details...

  my iphone 5s has reached the maximum number of account creation free icloud. What should do?

  Create a new account using your computer or a device different iOS.

  Once created elsewhere, you will be able to use that newly created

  AppleID to your iPhone.

• CP_MAIN database has reached the maximum size

  I get this pop up message that I use my computer.  It happens with everything that I use including Internet Explorer.

  "CP_MAIN database has

  reached the maximum size.

  I'm starting this post with my last update.  How can I fix this problem?

  Hi MarcDIGIUSEPPE,

  What version of Vista are you using? You have access on this computer? You are able to do anything on the computer when the message appears? The error message appears when starting the computer in Safe Mode? You can perform a System Restore to an earlier date when the error message appeared.

• Impossible to reload acrobat adobe XI - has reached the maximum number of times

  Impossible to charge adobe acrobat XI - I reached the maximum number of times. Any idea who I can contact to help with this. I feel I'm getting of the race.

  You can install Acrobat as many times as you want, but there is a limit on the number of activations.  If this is your problem, you should contact customer service to reset your number of activations.

• OE Inbox has reached the maximum size

  OE reached inbox size max, renamed in a new folder and now cannot access emails in there. I see it through with the data Explorer. I see the new folder in OE, but it is empty. What should I do to be able to access the emails in this new folder?

  Hello Janmomx3,

  Thanks for your post.  Please run the Fix - It in the article below:

  Outlook Express may stop working after you receive a "Mailbox full" message

  See you soon

• How to activate a reminder for when a shared review has reached its end date?

  I thought that Acrobat will send the initiator of a shared review a reminder prior to the date of "end of revision" is reached. This will allow his or her check with commentators how.

  It seems that we don't receive this reminder.

  When I place the process of shared initially review I saw that a reminder the review ends in a day or two.

  Lately, looks who ceased to...

  We use Acrobat X Pro & Std, SharePoint and Outlook 2010

  Appreciate your help

  Acrobat doesn't send regular emails and never did. You have the option of manually ' e-mail all reviewers ' via the Tracker dialog box, and of course when someone opens the PDF you will tell them deadline.

• Charter has changed its line-up and wmc still uses the old line-up. How long should I wait for a list update also?

  When wmc will update the alignment of st louis Charter cable channels? White takes so long? This has made my usless ceton card.

  PLEASE update the Charter Charter range St. louis. It makes me upset.

  I have download the Ford 30 times aday and it still has the old list of channels. I think im going back to tivo

  go to http://connect.microsoft.com/site1145 (registry of the site if you do not have
  have an account), and then use the comments tab to report it.
   
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Satellite A300-15 b battery reached its critical point

  That means: the battery has reached its critical point?

  I left the computer for the night and in the morning I found him screaming down and the message the battery reaches its critical.

  What it means?

  Hello

  This means that the battery and (between 3-5% of the battery power) to a level which caused the closed laptop.

  You can change these settings in Vista power management.
  For example, you can set parameters that would let the laptop stop automatically if the battery is discharged to a certain extent.

• SX20 it indicates the maximum number of calls has reached

  Hi all

  We have a SX20 with a strange issue it only makes a video call and when you try to call another participant, he says 'Max number of calls has reached '.

  The State of SystemUnit, we see the following

  Software

  • Application
    Endpoint
  • MaxAudioCalls
    2
  • MaxVideoCalls
    1
  • Name
    s52010
  • Release date
    2015 01-26
  • ReleaseKey
    true
  • Version
    TC7.3.1.8a4696f

  Is possible to change this MaxVideoCalls 1, I try to CLI but I have not found any command.

  Concerning

  Anestis Koukis

  All Cisco codecs are hard coded to allow only 1 video call and another 1 only audio call.  Something that cannot be changed.  If you need more than 2 connect video calls to a single endpoint, you will need either buy the licence Multisite which allow you to use the bridge internal of the SX20, or use a conference bridge external such as an MCU or telepresence server.

• My sisters thinkpad XP pro is unstable and it has lost its drive. I can reinstall using my xp pro disk and its product key?

  My sisters thinkpad XP pro is unstable and it has lost its drive.  I can reinstall using my xp pro disk and its product key?

  I fixed it!

  I couldn't work at all Internet Explore.  I finally installed Superantispyware from a USB pendrive and it ran in safe mode without network.  So I ran Malwarebytes and ccleaner.  After a reboot, everything works great again.  I could install Microsoft Security Essentials and get current updates.  After a smart defrag it turns really well now.

  I was able to make a recovery cd set too.  It will be just as good as if I he burned them on a new computer?  I mean can the data used to make these CDs get corrupted over time?  This laptop is 6 years old.

  Thank you for your willingness to help.

  MJ

• Can I transfer my license to upgrade to Windows 7 on a new computer? The system on which it is has reached the end of his life.

  At the launch of Windows 7 I bought one a version upgrade to upgrade XP on my Dell PC to W7 professional.  This PC has reached the end of its useful life, and I intend to give it up (literally).  I would like to transfer the license to upgrade for my Dell Netbook that W7 Starter Edition is installed.  Can I do this?

  Graham.

  Thank you very much, this is very useful.  Can I just confirm what constitutes an acceptable method of removing of Dell PC?  I have to do something to turn off allow it on the Dell PC before removing it?  I can't uninstall it (because the update of XP should be a clean install) so my options are delete and format the hard drive (my supported option, can I use it for storage) or go back to XP using an Acronis Disk image that I kept from the time of the upgrade.  Whatever it is, I imagine that Microsoft have to take my word that I removed?

  Graham.

  Yes, as long as its not in use on the computer. I would restore the Acronis Disk image that had saved you.

• Hi, my places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this. Visited links are is more changing color.

  Hello
  My places.sqlite file size is 30 720 KB I reached the maximum size, is there a maximum size for this.
  Suddenly the visited links don't change is no longer the font color, that I prepare for an exam, I need visited issues to change color, to follow up on issues that I ended. But if I delete a few days of history, then again once, most visited links change color and then it stops, it seems that something is getting full and not able to accommodate more? Why my visited links don't change color after a number of visits? I would like to make a back up of the file places.sqlite. So I tried everything to remove the profile, uninstalling reinstalling, creating a new profile, and then copy paste places.sqlite etc, but as mentioned after a few visits, visited links is no longer change color, if I delete a few days in history and then a few visits is again change color and then stop again, so what should I increase so that my quota of visited links is increased , I also tried tweaking about: config and there has been no result. Although I was not really convinced that _pages growing brower.history_max (don't remember the name, but I'm sure you get the idea) will help.
  Seems that while my visited links change color, quota is met and only if I delete the history of a few days will I get some links most visited to change color. Can someone enlighten us? As mentioned that my places.sqlite file size is 30 720 KB so I think maybe this has something to do with it? Would be very grateful if someone could help me. Thank you.

  Sorry it is not looking good.

  1. Unlike bookmarks history is not saved in Firefox.
  2. There is a possibility using Windows.
  3. Sync is not expected to back up things until the synchronization server
  4. If places.sqlite does not sort itself you may have to re-create remove it. You will lose your history, but can still access indirectly IF you have saved a copy of the appropriate
  5. Different databases to try to create new profiles
  1. History
     is rather less robust than bookmarks, you should deliberately somehow return it upward, but it's too late now
  2. Earlier versions of Windows
     This is really the last chance. Make sure you have some places.sqlite you saved. Always before and after any attempt to restore the backup. Windows must be able to provide a previous version. One of these versions may be usable as is; or can be used after a repair with housekeeping. Of course, this is not the latest version but it should help.
  3. Sync is not a server backup service.
     Sync is intended to save on another device, no backup is the fact that the second device then contains synchronized information. IIRC Sync development ceased, and the replacement when available may include a server backup option.
  4. Recreate the database of bookmarks (including history)
     Unfortunately, recess can only use saved bookmarks, there is no saved history to use. Once the database is re-created, it will continue to store the history but it loses the existing history. This time take steps to save on a regular basis.
     • The backup profile or at least the places.sqlite in this
       Backup and restore Firefox profiles information
       https://addons.Mozilla.org/en-us/Firefox/addon/FEBE/
     • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Rebuild_Places_database
  5. Use the new profiles for database testing.
  
  To simplify comparison of the results of the database different files create one or more new additional profiles. Then try to smash the places.sqlite file into the test profile with any other places.sqlite, you want to try. Allows you to directly compare the databases, without seeking to use sync and without changing the Firefox profile work unnecessarily. You can keep a reference profile of studies with the best of the profiles of any shows results of history; According to the best recreated or corrupted database is.
  • Use the Profile Manager to create and delete profiles Firefox
  • CARE, do not rename or delete profiles created once or use anything other than empty folders when they are created. Don't nest in the other profiles. (At least until you know exactly how it behaves - post back if you never consider such actions)

• TCP ip has reached the limit of security imposed on the number of tcp simultaneous connect

  Idle process original title: System, create tcp/ip connections to achieve maximum attempts allowed on win xp
  Continue to event viewer showing warning saying tcp/ip has reached the limit of security imposed on the number of tcp connect attempts simultaneous and system idle process, that's what causes this error.  To many connections 127.0.0.1:6999 127.0.0.1:4426 time_wait

  127.0.0.1:4427 TIME_WAIT
  etc etc etc.

  Hello

  Thanks for asking! If I have understood correctly, you receive tcp ip error message has reached the security limit imposed on the number of simultaneous tcp connect in Event Viewer. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2. when exactly do you face the question?
  3. what anti-virus is installed on the computer?

  Method 1:
  It is a warning that a malicious program or a virus can be run on the system. You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  
  Method 2:
  Check the behavior by starting the computer in a clean boot state. How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 3:
  Please close some of the connections (some types of downloads can use multiple connections).

  Check out the link:
  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=4226&EvtSrc=Tcpip&lcid=1033

  Please follow these recommended steps, review the additional information provided and post if you still experience the problem. I'd be happy to help you more