Questions about registered sites

Similar Questions

• How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  Feel free to change the title

  How can I change my HTTPS thing, so it isn't always pop up and ask questions about the sites Web secure when I play some games?

  You're talking about Facebook?

  Try the gyration of the Secure Browsing

  http://www.Facebook.com/help?page=1079

• I really need to talk to a customer service representative! unanswered questions about the site and the instructions, I can't access!

  my homepage windstream is not fair when I connect. help PG said click on firefox... Click on... Tools ect... There is no option that says all the tools!

  title edited by a moderator to get rid of excessive punctuation

  Hi rpitts,.

  You have the Firefox menu in the upper left corner? If you do, all you have to do is press Alt to temporarily activate the other menus. Which will give you access to the Tools menu.

  If you want these menus to be available at all times, you can go to Firefox > Options and activate the menu bar.

  Hope this helps!

• Question about C60 multi-Site Management

  Dear Expert

  I have a question about C60 multi-Site call using C60 as host.

  It there is a choice of layout as Edge 95?

  My opinion of close end site is not in the page layout and I go through a document to the administrator, apparently not metion on selection of layout on several sites.

  C60 is capable of having a provision such as "4-split' 95 edge?

  Thank you

  Best regards

  Tung

  Current version of the software of C60 TC6.0:

  

  You can also make your own layouts using the TC Console:

  http://developer.Cisco.com/Web/Telepresence-developer/tools/integrators/TC-console

  /Jens

• A few questions about the making of the animated for a site Web Nav buttons

  Hello, I have a few questions about creating some animated for a NAV buttons.

  There are 2 actions I want to trigger on pouting above.

  If I want to use a static (PNG) image I created in Photoshop for the real button, can I use that? I want well drag the button down on the passage of the mouse and drag upward on the mouse. If I push the part of the "Web" button (sorry, that it comes from a Photoshop guy) it will disappear in the final animation? Another way to say this, if I put something lively off the coast of the white area, it no longer appears in the movie (.swf) when it is published?

  For the second part. You can see a bit of what I want to do if you look high Nav of the page of the website: http://www.photoshopsupport.com/index.html

  I need the 'light' above the button and it's going to be on another < div > color so I can't put a solid color of BG for my flash document. But I want to get the effect of the 'bar' lighting up above the button and the real key slide downwards to pouting on.

  You can provide any help would be greatly appreciated.

  We target the dynamicaly graph. Since the MouseEvent is now on the invisible sprite and not the graph itself, the one-for-all function has no reference to this graph. You can access the invisible sprite with event.target (or event.currentTarget), you can also target the chart because we declared "mygraphic" custom property to serve as a reference for the graphic. Thus, event.target.mygraphic is the benchmark for graphics.

  Of course, this is just an example. There are other variations of this trick.

  ____________________

  Design Cyboide

  Web site creation

• Question about encryption for a VPN established between two of our sites

  We have two routers Cisco 2951, one at our main location and one at a branch.  An engineer for a local company came and worked all the parameters, including the VPN between the two men.

  For an upcoming exam, the firm wanted to know what kind of security/encryption has been implemented between the two routers.  The engineer is no longer available, so I've went over our configuration files for each of the routers and will have questions about what to tell them (I'll be the first to admit that some of this stuff is over my head).

  I enclose the portions of the configs with "crypto" information he put in place.  If you see something wrong, or need something extra, let me know.

  Thanks in advance!

  That's what you use:

  Phase 1: 3DES, SHA1, PSK, Group2 DH (1024 bits), life time 86400 s

  Phase2: 3DES, SHA1

  Which is today considered legacy crypto, but probably nothing to worry. The crypto-config has always considered that there is "room for improvement"...

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the installation of ColdFusion 9.0.2 version of existing in version 9.0.1

  Hello

  I'm currently running ColdFusion 9.0.1 enterprise edition and plan to upgrade to version 9.0.2 version. I understand that this requires uninstalling existing 9.0.1 and perform a new installation of version 9.0.2 version. My concerns are below:

  1. for the installation of the 9.0.2 version the 9.0.2 installer (demo / trial version) must be downloaded and the existing serial number (used in version 9.0.1) can be given during installation to convert it in fully registered mode - please correct me if my interpretation is incorrect here. My question is will the existing serial key (as shown in the page Admin of CF 9.0.1 version version) work with the 9.0.2 version as well?

  2. There are many features that are present in the current 9.0.1 version - for example the sources of data configured in the Admin see Y page there a way I can save these configurations of the existing version and to migrate settings to the new 9.0.2 install, or what I have to do the entire configuration manually after the installation of new? Data sources is something I can think; What other configurations can I save, if such a provision is available?

  3. in the installation of the 9.0.2 version there is a question about "configure the Web server for CF Connector" allows me to add Web/sites Internet servers during installation. If I select "built-in Web server" as the option (so do not configure any Web-site Web server), can I change this and configure Server/site later, after compeleting installation?

  What would be the things I need to be careful during this installation to version 9.0.2 from 9.0.1?

  Thank you!

  Arun-

  I did a successful version 9.0.2; installation answering my own questions, for the benefit of future development-

  1. Yes. Only the serial number is required (as shown in the Page of the CF Admin of existing facility)

  2 configurations (for example: data sources) can be exported. Go to CF Admin Page, click on packaging & deployment, click on Archives of CF. Basically, you export settings as files with the extension archive. car. Once exported from the current installation, it can be imported by clicking on the button deploying car file.

  3 server configuration can be modified (Add/Remove) by using the "Web Server Configuration Tool" which is installed by default with CF 9. You can find it under program files (windows OS).

  I had some problems during the installation. After installation, the CF Admin page would not be made. Virtually no cfm page don't take charge, because the extension is not known by the IIS (or the server you are using). To set this up, use the "Web Server Config Tool" mentioned above. This launch and activate the check box that is on the rendering cfm pages (forgot the exact name). Once this is done, cfm pages must load. I had to enable this and then do a reinstall but.

  -arun

• Satellite L650-11R - a few questions about this

  Hello there :-)

  I have a few questions about my new L650.

  I've never had Toshiba notebook before so I apologize if some of these "quirks" are actually quite normal on this laptop. I really want to hear the views of other users L650.

  1)
  First of all, by the time I turned it on I saw gradient thin (1-2 mm) along the right edge of the screen that goes from the bottom up. Maybe "degraded" isn't the right word, but it seems that since two or three pixels are kind of discoloration or lose brightness/sharpness to the edge along the straight bezel. It is not really that visible, looks like the colors are desaturated a bit here or brightness is a bit lacking. He can be seen everywhere (bios or no color in Windows, but better in the lighter background).
  The left side (or other) seems ok, all this along the right edge is somewhat suspicious. If one can compare? I don't know if it's something to worry about or is just supposed to be like that.

  2)
  The other thing I noticed heating of the processor (Intel i3 330M) and GPU (ATi Mobility Radeon 5650). It's pretty hot here right now (I would say that the temperature is around 28 degrees Celsius when using cell phones). He is sitting on the hard surface (table) and nothing is blocking the vents.
  However, at "rest" (surf the web & regular light stuff), average CPU temp hovers around 58 ° C. It usually goes from 45 to 62 in just a few minutes after starting, and then I can hear and see (Toshiba PC Health Monitor) evacuate the kicks in. Temp goes back to 50 +, event stops and then the temp rises to 60 + until the vent is used again.
  During load full (Prime95 or some games), CPU is going all the way up to 75 degrees (the highest being 77). Fan runs at 75 to 77% during this time, never go faster.

  GPU idling is usually around 5 degrees above temp CPU (62-65). During full load (for example. Benchmark of Far Cry 2), I see a lot of stuttering with the latest drivers Catalyst and DX10 (not sure if the stuttering has something to do with heat), otherwise it is ok (no artifacts or anything like that). Temp of GPU during the loading goes up to 74-75, fan speed is locked at 30%, the frequency of the heart 5650 is 450 MHz. left side of the laptop (vent and below) is pretty hot, while the keyboard is warm (or slightly warmer who who).

  These time seems correct and safe in the long term? I'd rather events works all the time (they aren't really very strong) and keeping time less than 50, but there are just wishful pious bios control events and I can't control not the bios. :-)

  3)
  This is just General related products. :-)
  Official specifications of Toshiba L650 say ATi 5650 (between other low range GPU), but I saw a few specifications calling for there 5730 (same model 11R). Is there really a Satellite L650 with ATi 5730 GPU models?

  Sorry for the long post, I tried to include the best possible description that I could do. :-)

  Thank you in advance.

  Thanks for the additional info!

• Questions about Stor.e TV +.

  Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.

  I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.

  Hello

  I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.

  As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.

  In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
  http://UK.computers.Toshiba-Europe.com

  Just give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.

  I hope I could help you a little bit :)

• Question about OWA scripts - how much time do need to run or not at all

  Just a question about OWA on Exchange 2010 scripts. I have a site and unique Exchange Server. I noticed that we have a powershell script scheduled in the Task Scheduler running daily that defines all the mailbox OWA strategy. This policy is defined in the EMC access client/organizational Configuration (EMC) tab.

  My question is... If the policy is already configured in the access client/organizational Configuration tab, should this powershell script run at all?  Not all new users get this strategy by default (since we have only one policy OWA) If you enable Outlook Web access on the mailbox of the user in the appearance of the mailbox tab?  My thought is that the powershell script and the calendar was just a postponement of the old Exchange 2003 for strategies for the OWA...

  Thank you.

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Office/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  See you soon.

• I have several questions about performance in XP that I asked about

  I have maybe something to do with my pc which has caused several issues that I have been asking questions on this site and have yet to get solved. Maybe it's a matter of slow internet access or an intermittent problem of internet access or a busy RAM which caused these problems for me:

  • 7 + 1 end Nows to Log Off or restart
  • IE cannot display the website (goes and load when I click Refresh!)
  • Enter the network password
  • Scrolling mouse (sometimes) when I click on a link in an e-mail or on a website or open a new tab opens to the blank page
  • Yahoo Messenger which is set to autostart in the Journal, sometimes impossible to display the weather plugin and so I just click on the v Options above and select Reset to Default height and it then displays to fill this place and it is currently running. What can I do to speed up my slow sometimes Tablet?
  • What can I do to speed up my slow sometimes Tablet?

  My Internet Explorer works fine, almost all the time and only question #2 or #4 occasionally and not very often. I need to put right at the front here saying that this isn't a malware problem and it is not a lack of program updates. If you could help me with this, just read my profile since these two are discussed in depth in my profile. I recently did a clean install and I visit unwanted websites on the internet and not much at all and I have installed Security Essentials immediately and it updates every day on its own. Also, I've updated all my programs and drivers manually and my operating system as much as possible by using Windows Update in custom update high priority mode (optional) software & hardware (optional). And I use File Hippo at each connection to find updates of programs that are available and I used another program to search for driver updates.

  I was unable to find information about malicious programs in your profile. Malware is STILL a possibility. ALWAYS. You run MBAM?

  Must you Yahoo Messenger runs at startup? (I doubt it). Plug-ins are also known to cause problems. If your plugin weather might be screwing things up.

  You have never set up a clean boot?

  Finally, you should never connect, I pointed out repeatedly. Reset must be a rare event, too.

• 2 questions about mcupdate.exe

  Use Vista Home Premium 32-bit with SP2 of Vista on HP desk top of page

  2 questions about mcupdate.exe

  1. what is? When I google it I get's things on McAfee. I have McAfee and never had McAfee. The information google seems to indicate that it could be a virus. However, I see the following

  -It seems to be in the ehome on my computer folder

  -It seems it works twice a day and every time it turns my internet connection log shows the connection to a microsoft ip address for 'download tv' or something like, think if it is not not a virus

  2 seems that it does not always work. I'll get these connections every day, twice a day for a few weeks or more, then get not every day.

  Currently I seem to not get any activity, just after the silver light updated 01/09/10. I do not use the TV feature on my computer, but I was wondering what it is and why it works sometimes

  Hello

  The link works here even if it could be glitch or malware, if you can access a Microsoft site. Try
  Yet once, and if no joy don't try to see if you can reach http://www.microsoft.com

  The 2nd link describes the file unless it has been replaced by malware here is information.
  Would that be a normal update.

• Question about the issue of the Double NAT...

  Hah I posted for a little.  I have a question about Double NAT.  Is it wise to launch?  Reason why is that I have a WRT54G v6 router and the Zoom ADSL X 4 Modem/Router/gateway and it seems that sites take just a little more time to respond to Web sites.  I just want to know I have to turn off (i.e., go in with my router bridge Mode) or what.  Or leave it alone.  Now one last thing: that the problem of slow could actually be AT & T but I have the feeling that this isn't.

  What configuration options you have on the Zyxel to fill? What have you tried exactly?

  The basis for the first option is:

  * Bridged Zyxel.

  * Linksys configured for PPPoE with your user name and password for the internet connection.

  Instructions to fill the Zyxel are here or here depending on the exact model of Zyxel.

  The second option is:

  * Zyxel doing business as the router. I assume here that the Zyxel is on 10.0.0.2 with a subnet mask 255.255.255.0.

  Unplug the Linksys to the Zyxel. Connect a computer to the Linksys. Open the web interface of the WRT to http://192.168.1.1/

  On the main Setup page:

  1. change the LAN IP of 192.168.1.1 address 10.0.0.1.

  2 disable the DHCP server.

  3. save the settings. You will lose the connection. Unplug the computer.

  4. wire one of the numbered LAN ports of the Linksys for the Zyxel. Do not use the internet port of Linksys!

  Now you should be able to open the Linksys web interface to http://10.0.0.1/ all devices connected wireless of Linksys or connected to one of the three LAN ports must have a connection to the internet via the Zyxel.

• Question about the strength of password

  (do not ask questions about the recovery of the password, so please do not report this thread)

  OK, I heard that the virus can change the password on a computer.

  But if you have a password very complicated (for example, one with a lot of numbers and other things), it will be more difficult/less likely for the virus to be able to change your password?

  Yes.  A strong password is, it is more difficult to crack.  For more information, see create strong passwords on the Microsoft online safety site. Boulder computer Maven
  Most Microsoft Valuable Professional