Questions about the right way to create a logon page?

Similar Questions

• Question about the right way to implement the network connectivity.

  Hey guys -.

  I've read a few articles and the configuration of many times on this practice guide, but I can't seem to understand what the way ' own/best practices' to build the network aspect of the VMware host to the switch.  This environment is my lab environment, FYI.

  Can someone please shed some light on this.  I followed it - http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004127

  My scenario is:

  -2 hosts ESXi 4.1 running

  -Each host is the same hardware

  -Each host has 2 network cards

  -Both connected to a single 3560 (although the 2 are available)

  -Each host connect to a San (running OpenFiler) on iSCSI

  -VLAN 5 is involved

  -The two hosts in vCenter in an environment non-clustered (for now)

  • So, each host must connect to the switch as a trunk or an access port?
  • If the sheath is the method, which is done tagging?  During the switch, or the vSwitch on each host?
  • How do you know when to choose between safe or not safe?
  • Must each host have 1 vSwitch for VMs and a vSwitch separated for the iSCSI connection?
  • Should the 2 network cards be associated to in VMware to the switch?  Or should they should be a channel of the switch port?  Or none of these options.

  I'm still a newb to the VMware line, so I'm really just practice a lot lately.  Any help is greatly appreciated.

  3. Yes, but some companies, like to give this control of security to the network instead of the VM team team. I would say just trunk, but I'm sure that there are borderline cases.

  4. Yes, I would be to separate traffic by giving iSCSI it's own NETWORK ports and also separate iSCSI traffic to its own network to the physical switch instead of just VLAN.

  You are welcome. Good luck!

• Ask questions about the best way to build a page

  I built a site design in Photoshop and then slice it upward, leaving a space for the main text of each page. Then, I put the html code and images in Dreamweaver and built a model, make an editable region in the table cell where the main text of each page will go. Here's a screenshot to give you a better idea...
  
  Screenshot
  
  Originally I set up so that the combo box had a scroll bar to accommodate the amount of text to the page (I used whole overflow to auto in CSS). The problem is, the customer does not want scrollbars and wants to dynamically extend the page vertically according to the amount of text for the page (with top image of women aligned with the text and their relationship to bio under the navigation bar and 2 magazines and photos that his introductory text and copyright is pushed down to the bottom below the main text).
  
  If I don't use the scroll bars and try to put more text that you can insert into the editable cell, it breaks the table and nav bar gets all messed up and looks like this...
  
  Screenshot 2
  
  I am at a loss, how can I set up so that the page will dynamically expand vertically with the text? Any suggestions? A table is not the way to go? What is the best way to do it?
  
  I'm open to what it is at this point, I tried things on my own for hours with no. results, any help is appreciated, thanks!

  Hey everyone, I just wanted you to know that I have rebuilt the table in Dreamweaver, it has worked very well and solved all the questions I had, thanks for any help!

• Satellite 2410: Question about the different ways to use BlueTooth

  Hello

  I can't find a place to buy a bluetooth module for my Toshiba Satellite 2410 - the manual says I can, and I know that there is space on the underside of the laptop to insert it.

  I can't seem to find one to buy - anyone know if they actually exist, because I'm starting to think not? ! .. .where is the best way to bluetooth enable laptop to buy a USB adapter?
  If so, a good market will affect the download speed when using the Internet? And what is the difference between an SD card and a USB bluetooth adapter?

  Any help would be appreciated.

  Hello

  I don't know your name of your Satellite 2410 but I found that a similar Satellite 2410 603 on the Bluetooth device is not available. Only the WiFi card is optional. This means that it is possible to install a wireless network card. The slot for the update of the Wlan card you will find at the bottom of the unit AND NOT the Bluetooth slot.

  However, if you want to use BT technology so the easiest and cheapest way is to buy the USB Bluetooth key.

  PS: BT has nothing to do with the internet, and it has no negative influence on the data downloading or transmission of data from the internet.

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• What is the right way to migrate from the PS CS5 and LR5 from my old Mac Pro to my new iMac 5 k?

  I am ready to migrate my boot drive for the new iMac and I worry about the right way to take my Adobe Ps and Lr, Br on the new computer. I migrate disable on the old machine, or disable and remove and reinstall on the new iMac? I don't want to spoil!

  Yes, you can install from your original discs as well.

• Question about the alignment of tank on the right side.

  Hello
  
  I got stuck on the display of numbers in varchar2.
  As I saw the result of a select cmd, if the data type is of type char,
  the result will appear as left-aligned. If the data type is the number
  the result is aligned to the right.
  Say
  create table tmp1)
  Identification number,
  name varchar2 (10)
  );
  
  Insert tmp1 values (1, '1');
  Insert tmp1 values (2, '2');
  Insert tmp1 values(3,'John');
  
  SELECT id, name from tmp1;
  
  name identity
  1 1
  2 2
  3 John
  
  How can I align the right to name column?
  In other words, how to tank right column aligned?
  It is the result of what I want. (In line with, I used underscores in the name column.)
  name identity
  1 ___1
  ___2 2
  3 John
  
  
  Thank you.
  
  
  Phil

  Use LPAD (col1, 10,' ')

  SQL> with data as ( select 1 id, '1' name from dual
    2  union all      select 2,    '2'      from dual
    3  union all      select 3,    'John'   from dual
    4  ) -- data
    5  select id, lpad(name,10,' ') name
    6  from data ;
  
          ID NAME
  ---------- ------------------------------
           1          1
           2          2
           3       John
  

  SS

• Recently bought a laptop computer; A few questions about the offer Upgrade to Windows 8

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?
  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?
  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.
  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
  Thank you very much!

  I have a few questions about the Upgrade of Windows 8 offer for new computers.  I recently bought a Toshiba Satellite S855-S5268 of amazon.com, which came with Windows 7 Home Premium.  Toshiba already has a beta version of drivers and utilities for Windows 8 for the S855 on their Web site.

  (1) I bought my laptop in July of this year, and I've not yet registered for 8 Windows Upgrade offer with Microsoft.  Am I still eligible to receive the upgrade, if I sign up soon?

   

  Yes, the registration period is between June 2, 2012 to January 31, 2013.

  (2) if I buy the upgrade through this offer, I'll be able to download an ISO file so I can burn the installation media, or do I need to upgrade to Windows 7?

   

  Yes, the Upgrade Wizard of Windows 8 will allow you to create a bootable DVD or you can grab the ESD file and save it.

  (3) if I will be able to burn the installation media, I'll be able to erase my hard drive and do a clean install of Windows 8 (which I'd rather do, I have a lot of backups of my data).  I am aware that I would probably need to provide my product key Windows 7 Home Premium 64-bit OEM during the new installation, because it is an upgrade and not a full version; This isn't a big deal, because my Windows 7 Home Premium 64-bit OEM product key is stuck at the bottom of my laptop.

   

  Yes and there are better ways to reinstall Windows 8 without using the installation disc, you can use the reset and refresh.

   

   

  These steps will take you through refreshing your PC:

  · Press the Windows key + C on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · Under refresh your PC without affecting your files, click Start

  Then follow the instructions that will be provided on-screen to cool your PC.

  (4) my current copy of Windows 7 is activated by seeing my BIOS (I have a traditional BIOS, not a UEFI).  If I had to switch to Windows 8 and decide then I'd rather back in Windows 7, for example, a few months later, I'll be able to do that (I burned recovery of Windows 7 with the Toshiba utility disks, which I did), and Windows 7 will continue to activate by seeing my BIOS, even after the installation (and later remove) Windows 8?
   
  As long as you have a recovery disk which you should create or use the construction in the recovery partition, Yes, it will self activate.
  Thank you very much!

• Questions about the implementation of clusters of storage and DTS on active cluster

  I have a few questions about the implementation of clusters of data store and SRS storage in VSphere 5.1.

  We have a data center with about 15 HP blades and a few servers non-lame.  The hosts are all either VSphere 5.0 or 5.1.  Our back-end storage is an EMC VNX 5700 with about 20 stores of data.  All the VMWare is managed by VCenter 5.1 running on a dedicated physical machine.

  Currently, each data store is used individually; No piles of data store are put in place.  When a new virtual machine is created, the administrator usually chooses the data with the most space store.  Periodically, we will go back and manually storage vMotion machines to balance the load.

  Recently, we have expanded the VNX storage, so we now have LUNS in different pools, with different levels of performance.

  What I would do is set up for the data store clusters, so that us when a virtual machine is created, the administrator must not know what data store is in which pool.  Also take advantage of the DRS storage so that the burden of storage will be "refine" himself a little.

  I know the setting up of a cluster of storage in a 'clean' environment is quite simple, but my concern is creation/conversion data warehouses existing in active production in the cluster, while they are used.

  If I access the screen "data warehouses and store data from clusters ', right-click on the data center and create a cluster, and then move the various data stores in the new cluster, will there be an interruption in the production running systems?

  I also wonder about activation of storage i/o control.  It is not currently enabled on data warehouses.  I know it's useful for the StorageDRS, but will be allowing any negative impact on the system?  If I turn on the warehouses of data, is there anything else I should do or set in addition to all that allows him?

  Finally, we are in the process of Site Recovery Manager configuration.  SRS has an impact on the configuration of the data clusters and DTS store?

  Thanks in advance for your comments.

  Mike O.

  Gregg Robertson wrote:

  Hello

  Clusters of data and using DTS store doesn't impact RS even if you create a cluster of data store for storage of replicated data and another for everyone else, this way you machines virtual you want to replicate are not moved on warehouses of data that are not replicated , but will still have the ability to move if there is a conflict.

  Gregg

  With all due respect but SRM and DTS don't go together. SRM does not at all support the use of DTS. So if you are configuring SRM forget DTS for now.

  Reason for this is that SRM knows no DTS and VMs can be in flight when a failover should occur, and bad things can happen. Also, the protection breaks when a virtual computer is moved between data warehouses in a cluster data store.

  In short: don't go there.

• The right way to store the results of the query

  Hey wizards Oracle,.
  
  I have a few questions that take a long time to run. Given that the results of these queries change only once a day, I will execute queries every morning and store their results in a table.
  
  I was going to serialize them in chains to the CSV format and then store them as CLOB. But shit, Oracle is a data table, storage system! This is reinventing the wheel within a wheel.
  Then I thought about creating one table per query would be the right way to store their results. But ordinary tables data recovery would be slow, because I would need to create an additional of ORDER_BY column to maintain the order of the results of the query.
  
  It seems that there is a way to store varrays in the LOB columns, but it does not seem to be appropriate.
  There may be a caching mechanism that could help?
  
  Does anyone know the proper way to store the result of a query?

  What you describe is a reinvention of the materialized views.
  Have you considered using them?

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Questions about the process of cloning in Oracle Apps

  Hello..
  
  I'm trying to clone Oracle 11i (single node) Linux applications, but with some doubts in the process... could someone please help me...
  
  I ran preclone (adpreclone.pl) scripts on both layers of DB and APPL system source... then stop apps services and target the database copy in the system... but my question comes here... they say I should be copy only files of the SUMMITS as APPL_TOP, COMN_TOP, etc. and ORACLE_HOME, IAS_ORACLE_HOME... but these TOPS and HOUSES exist within a directory as...
  

  example:
  APPL_TOP - / dev/p01/oracle/devappl
  COMN_TOP - / devc/p01/oracle/devcomn
  ORACLE_HOME - /dev/p02/oracle/devdb/9.2.0

  by note metalink (230672.1), they say it's to copy...
  [APPL_TOP]
  [OA_HTML]
  [OA_JAVA]
  [OA_JRE_TOP]
  [COMMON_TOP] / util
  [COMMON_TOP] / clone
  [COMMON_TOP] / _pages (if this directory exists)
  [806 ORACLE_HOME]
  [iAS ORACLE_HOME]

  My question is should I be creating directories like (/ dev/p01/oracle/devappl) (/ dev/p01/oracle/devcomn) and copy the TOPS and HOMES in appropriate subdirectories or just simply copy... then run the process... postclone your ideas and suggestions are welcome... Thank you...
  
  Published by: Hart on June 11, 2011 03:13
  
  Published by: Hart on June 11, 2011 03:19
  
  Published by: Hart on June 11, 2011 03:21

  your right... that's the real way, manually create the directories and copy them from the source to the target by the metalink (230672.1) note... but I'm worried that I might miss some files in the copy process... I mean are below here are the the only ones required in the process postclone... because if you see the real $ORACLE_HOME (/ dev/p02/oracle/pixdb/9.2.0) to the user oracle is missing... What about the database files? .. .is there all I could mention to facilitate the creation of directories...

  You can just copy the files in the directories devdata, lolo, devappl, devdb, devcomn.

  Also all by creating the directories in this way... If I'm going to use a new name for the instance, do I have to replace the "dev" to the new name as 'edev' or something and then start the postclone process...
  /dev/P02/Oracle/pixdb/9.2.0
  /dev/P01/Oracle/pixora/8.0.6
  / dev/p01/Oracle/pixora/IAS
  / dev/p01/Oracle/pixappl
  / dev/p01/Oracle/pixcomn

  You can use any name for the main mount (it is-to-say/u01 /... or/edev /..), just replace dev with edev for five above mentioned directories.

  Thank you
  Hussein

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.

• How can I get this question to the right person in Sony cameras?

  How can I get this question to the right people in the Sony cameras?  The main site contact form does not have a pre-sales question:

  I intend to buy a digital SLR type that has at least 24 million pixels, 4K recording/storage/exit offers video, Wi - Fi, objective interchangeable with anti-shake zoom function and which allow me to save my pictures in full form, so that I can view in 4 K on a Sony 4 K TV.
  Looking at the picture of the cameras is intimidating.  I prefer Sony.  Can you point me to one of your cameras that meet my needs?  If there is on the way before the month of may of the next year, please let me know about that as well.  In addition, I don't want the so-called very high prices of professional cameras, namely $5K or more.  Thank you.

  With regard to a DSLR with 4 k video, no again.
  Will there be one in the future? Yes there will be.
  When? No idea yet.

  The closest thing that currently holds the Sony is the Sony RX10ii

  DSLR body, 4 k video, built in an optical (in lens), wifi/NFC, stabilizer etc.

  However, it is only 20mp and it uses not interchangeable objectives.
  It's lens located between however 18-200mm (35mm equivalent)

  Finally, it's only a 1 "sensor, so don't expect a quality digital SLR image, but quality located near DSLR quality nonetheless.

• Questions about the management of specific nodes in different hierarchies

  Hi all

  I have a question about the specific management of some particular set nodes, which are located in different hierarchies within a same version.

  I want to know if there is any editing made to certain properties of these specific nodes or if the nodes are deleted/moved/edited approval to be triggered for the data manager.

  or should not allow users to edit (adding/moving/deleting/changing property values) or those specific members.

  
  

  According to my understanding of the nodes of domain prevents the removal of nodes, but I don't want my Member prefix/suffix, domain is the only way to prevent the change.

  
  

  
  

  
  

  Thanks and greetings

  Madhu
  

  We have an obligation to not allow a node to remove or deleted without the approval of the admin, so I created a Boolean property AllowDelete is false, which is substitutable, default and is available only in a category of property Admin, for which most of the users do not have access.  Then, I created a validation of PropRemove with an error message that tells the user to contact a user admin to remove or delete the node.  The admin can change the AllowDelete to true, then can either remove himself or to allow the user to do.