Questions about Wi - Fi connection speeds

Similar Questions

• Question about PERC H330 write speed:

  Hello. We just got a Dell PowerEdge T330 with 4 x 120 GB SSD in a RAID10 configuration.

  A ran an ATTO Benchmark and worry about the shown writing speed the image below.

  Parameters or settings to change that?

  FYI - the SSD are Intel DC S3510 Series (6 Gbps)

  

  Hello

  HOMERSlMPSON

  Parameters or settings to change that?

  The write speed seems normal. I don't know what your expectations are.

  The H330 has no write cache. Any RAID array you create will have raised. This overload causes readers to write more slowly as if they were not in a RAID array. If you need to improve performance, then I suggest that you upgrade to a H730. The H730 has write cache and should not interrupt the flow of data. He is able to cache these data instead of making a break and unpausing.

  Thank you

• Satellite A300 - question about the MIDI connection

  Can someone help me?

  I have a computer laptop satellite A300 and want to connect it to my computer to stream TV and movies.
  I don't see where I would plug MIDI to my computer.
  Is it possible to do with this model?

  If not, can I get a plug that would stretch the capacity of the computer or I have to get a new computer?

  Thank you
  Carol

  Sorry, but I m confused
  You said you want to connect the Satellite A300 to a computer
  Is this correct?

  You can connect two computers via a LAN cable. But I have no idea why you talking about connecting MIDI (Musical Instrument Digital Interface)

• Questions about SPDIF cable, connection, configuration on Qosmio G20

  I would use my QOSMIO in my home theater equipment. But I don't know how to use the SPDIF output. This output is common with analog headset, so I think I should do a this port configuration (software)...
  My questions are:
  -Should what type of cable/connection I use?
  -How the correct configuration of this output to get the digital sound signal?

  Thank you for your advice.

  Hello

  Well, the S/PDIF Jack allows you to connect digital speakers or stereo headphones (minimum of 16 ohms). When you connect a digital speaker or the headphones the internal speakers is automatically disabled.

  Please visit this link. You will find the cable that you can use:
  http://www.impactacoustics.com/categories.asp?cat%5Fid=900

  Useful information on a S/PDIF cables and technology:
  http://www.epanorama.NET/documents/audio/SPDIF.html
  http://www.interfacebus.com/SPDIF_Audio_Interface.html

  Good bye

• question about the WiFi connection

  OVERV wifi in the notification area Android says I'm not connected even though I am able to send chat messages as they are received. Not the case with voice calls.

  When I try to call someone on the phone or mobile number, that the call recipient responses I am able to hear from him/her, but they can't hear me back.

  In terms of data, everything works fine. Please fix this.

  Resolved when I disconnected the application Skype in Windows 8

• Question about internet BrodBand connection

  Hello everyone it's internet connection BrodBand is coming with WiFi?

  Please answer me.

  The transmission of the data depends on the WLan standard.

  Here on this Wikipedia page, you can find different standards WLan and details:
  http://en.Wikipedia.org/wiki/IEEE_802.11

  Best regards

• QUESTION ABOUT THE ID___ CONNECTION

  I HAVE A COMPAQ LAPTOP AND I LOST MY LOGIN PASWORK IS THERE A WAY TO DO THIS WITH RESET TO REBUILD THE LAPTOP

  If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.

  In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.

  WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
  MS - MVP - Elephant Boy computers - don't panic!

• question about laptop connectivity

  Question about my laptop computer connection

  Hello

• Question about the speed of Wi - Fi on Satellite L30

  Dear Sirs,

  I have purchase a Satellite L30 the WiFi card works fine but the connection speed is 54.0 Mbps, I need 100 Mbps, more can you tell me if it is possible to upgrade this laptop internal WiFi card and can you suggest to replace appropriate if possible.

  Your faithfully,
  Neil Quinney

  Hello, Neil

  I can't say for sure, but I think that for the moment there is no info on the compatible wireless network card. If you need specific information about this, please contact partner service authorized in your country or your local dealer. They are responsible for the upgrade.

  In any case, I do not believe, you will find a compatible card for this model of laptop budget. Easiest for you is to buy suitable USB WLAN card. The installation is very simple and I do not think that you will have compatibility problems.

  Good bye

• questions about 2100 wlc and lwap connection

  Hello

  I have a few questions, I hope you can answer me.

  In fact, I have a controller connected to 3 Lwap 2100, and they are connected to the WCS. they have a static IP address.

  The distance between each point of access to more than 30 meters.

  1. the distance between the access points affect the accuracy or the stream. How can I calculate this

  2. because the APs use a static IP address, each customer should I connect to the network to add a static ip address? can I do the APs detect clients dynamically?

  I have lwapp reset guide, guide WCS configuration and configuration guide for WLC. If you have more documents or more pls share with me.

  BR

  Yamani

  Hello Ahmed,.

  Yes the distance between AP affect the wireless signal.

  to determine the best location of AP and the distance between them, as the site survey is necessary with the expert of the spectrum wireless or airmagnat...

  You can check the following links for design and RF management

  1) http://tools.cisco.com/squish/1Ea09

  2) http://tools.cisco.com/squish/51a58

  for other questions about DHCP, it is not a must that customer use static IP, you can always configure them with DHCP.

  as an extenal DHCP (like windows server), or on the WLC himself (to the title of controller-> > internal DHCP tab).

  Kind regards

  Talal

  =========
  Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find

• Question about the connection of a customer VPN ASA

  Hi guys,.

  I have a question about Tunneling VPN. I have an ASA 5505 with static PPPoE address external and local 192.168.202.0/24 network, operates as an EasyVPN server. On the other side is an another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN customer in customer ode. The internal network is 192.168.1.0/24

  It works very well! But now, I created another user who uses EasyVPN client software to connect to the EasyVPN server. This works as well.

  But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Please give me a hint.

  "But how am I able to connect customer network 192.168.1.0/24 on the connections of the ASA?

  Yes, if you set the ACL of split tunnel correctly you should be able to connect to the remote client ASA.

  Please follow the method of configuration of Cisco doc split tunnel, at the bottom of the link.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00808a61f4.shtml

  Evaluate the useful ticket.

  Thank you

  Rizwan James

• Question about the need to connect every 30 days...

  I understand the need for CC programs to connect to license Adobe servers, every 30 days (or it's 99, since I have an annual license?) of re - check license status.  That said, I have a question about the timing of these connections the licence renewal.

  What happens if I happen to be disconnected so far here 30?

  With the help of Microsoft for example...  I need Visual Studio to reactivate my developers license every 30 days in order for me to develop applications Windows 8 'metro '.  If I happen to be disconnected so far here 30, I am unable to work on any apps 'metro' until I got online.  (And I don't see any way to tell him to reactivate at the beginning).

  What happens with Adobe CC?

  Suppose I have license, and I am online for 29 days.  Then, the 30th day, I find myself be in offline mode when I start one of the programs of CC.  Now what?  Does the 30-day clock 'reset' every now and then during this time, or is it really only try every 30 days, and I have to be online on that day?

  Hi kenbrody,

  Please see the thread: http://forums.adobe.com/thread/1190831 .

  Kind regards

  Romit Sinha

• Minimum connection speed & a few other Questions.

  Living in rural Vermont that's worrisome, is there a minimum connection speed for CC versions?

  If there is no internet access during the days of 23-33 but go back to the day 35 what happens?

  Check-in is possible the day 21 instead?

  Finally, I saw mention CS7 CS8. Is it in the planning phase? If the CC versions are simply a conveince for those who want this service and regular updates are forthcoming, I would be much happier.

  Thank you!

  Hello

  There is no minimum do not connect speed requirement for the composition of the creative cloud or using products CC.

  The two things that you would need an Internet connection are-

  1. the products of creative cloud you want to use to download & install

  2. licenses & activating products by signing with your ID Member CC

  # 1, adobe has implemented many improvements to be able to resume downloads of products CC post a network outage or failure.

  # 2, a minimum Internet bandwidth is required

  So as long as your connection allows you to accomplish the above, you're all good.

  > If there is no internet access during the days of 23-33 but go back to the day 35 what happens? Check-in is possible the day 21 instead?

  If your subscription of the CC is active, you will be able to resume work on the software after reaching 'Try Again' in the prompt 'Renew your membership' that you see in the software on the 35th day. We are working on some improvements allowing flexibility compared to subscription monthly check-ins.

  > Finally, I saw mention CS7 CS8. Is it in the planning phase? If the CC versions are simply a conveince for those who want this service and regular updates are forthcoming, I would be much happier.

  Please see the letter of the Cloud creative team for more information - http://www.adobe.com/cc/letter.html

  Thank you

  CharAt()

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• Power setting change the connection speed

  I don't know if anyone else has noticed this, but when I change my setting of symmetric power high performance on my laptop and when I start a stack and not connected to the adapter, I noticed a connection speed much more to my wireless router when I connect to the desktop computer. I'm curious because sometimes it wouldn't connect and join the star thingy and I have to reconnect but when I go to the balance or start on battery, the connection speed is almost instantaneous. I tried to uninstall my wireless driver and let the computer to reinstall the driver itself and it fixed a bit, I could connect automatically, more fast, but still not as fast as the balanced mode. Someone please tell me what to do because the problem is back.

  Hello Charles,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Refer to this article:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Why is my Internet connection so slow?
  http://Windows.Microsoft.com/en-us/Windows/why-Internet-connection-slow#why-Internet-connection-slow=Windows-7

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you