Question about the speed of Wi - Fi on Satellite L30

Similar Questions

• Satellite A10 S203: Question about the speed of the RAM

  I want to upgrade the RAM in my A10 S203. I know that there are 256 MB DDR RAM in my pc, and I want to add a little. Nobody knows what the speed of the RAM, to know what kind I need to order. I know that the format of the upgrade of RAM must be 128 or 256 MB or 512 MB, I only need to know the speed of this DDR RAM. anyine can help me?

  Hello

  Well, as far as I know the unit has 2 available slots and you can upgrade memory maximum. 1024MB.
  In addition, the device uses the modules of PC2100 DDR - Ram:
  PC2100 128 MB (PA3126U - 1 M 12)
  PC2100 256 MB (PA3127U - 1 M 25)
  PC2100 512 MB (PA3164U - 1 M 51)

  I studied a bit and it seems that the PC2100 256 MB (PA3127U - 1 M 25) module supports a 266 MHz.

  I hope this helps a little.

• M60: Question about the speed of HARD drive

  Hello

  does anyone know what RPM disk hard m60 turns to?

  That means Smart in the specification of HARD drive?

  Thank you very much
  Panos

  Panos Hi,

  In my view, that the hard drive in the M60 turn 4 200 RPM.

  S.M.A.R.T. means Self -Monitoring hasnalysis and Rinputs of technology. A system in which the hard drive can monitor his own health and report on potential failures before they occur.

  Kind regards

• Question about the installation of Win XP on Satellite Pro P200

  Hello

  I have a lot of problems with Vista. First it took me a week to install my printer WiFi. (sollution: install local lpt1 as the printer, change port properties en gives a location network (computer/printername).)
  Last problem: vista give no right to copy my USB hd protable with xp files.

  Finally, I lost all hope and want to go back to xp.

  Is there anyone with experience in the installation of win xp on this laptop. And is it possible to tell me the steps that you have been taken to do so.
  Are there concerns as none have some drivers, things that do not work or problems with sata hd.

  Thank you

  Luke

  Hello

  It's a difficult topic-> XP on Vista machines.

  First: Yes, you can install XP on it because all the important factors are available (VGA, SATA, wireless, XP BIOS, BLUETOOTH) and that should be enough.

  Because your computer has a BIOS for Vista (I guess there a) Please install the BIOS XP first and then start the installation of XP. In the case that your HARD drive is not recognized then you need to install the SATA driver during the installation of windows XP. The procedure is described in the statement of the Satellite L40-> XP installation, so if you want to install and problems SATA (HDD, not during the XP installation), you must check the installation instructions for Windows XP for a SATELLITE L40!

  If you have additional questions, I recommend allows you to place your question here before doing something that may stop your nerves later. :)

  Welcome them

• Questions about the discs of recovery and partitioning Satellite A200-QH0

  I bought a model of Satellite A200-QH0 in Australia and due to the lack of forums in our country, I would like to ask a few questions here if that's ok.

  The book contains 3 partitions - partition "EISA Configuration" of 1.6 GB, the great partition of the BONE and the recovery partition. So I did the recovery DVD? s using the Recovery Disc Creator tool, as we are not provided with a real disk. But I would like to know what will make these records? My questions:

  1. they really will return that disc hard back to the _exactly_ how he was including the partition layout and software pre-installed?
  2 will be the recovery DVD works even if the disk has been repartioned? I would like to divide the system partition to give space for the files of data etc. But this extra partition will stop the recovery procedure works correctly?

  Please understand that I'm not interested in reformatting the entire disk. I want to just split the partition from the OS. But in case I need to replace the disk in the future or something, I would like to know how to close to 'original', these disks will make me, no matter what I do on the disc?

  Thank you
  Dave

  Hello

  I m not 100% sure how recovery works on the Australian laptops computers Toshiba, but I presume that the restore CD contains the image of Toshiba with the operating system Windows, drivers, tools and utilities.
  I think that if you want to use the recovery CD then the whole HARD drive will be formatted and all partitions will be erased.

  I think that the recovery partition is not created using the recovery CD because the CD of restoration has already been created for the recovery partition is no longer necessary

  Concerning

• Question about the use of graphics drivers on satellite L350D

  Hi its me again...

  I want to ask abuts what graphic drivers I use shud on Toshiba Satellite L350D 20 d?

  Well meet South eazy if the monitor will be added to your laptop for maximum performance with quality and if it wil lbe same manuf. TOSHIBA LCD Toshiba laptop monitor...
  I just my laptop discavery have name of the monitor (FAB): SAMSUNG LTN170X2-L02... which is weird... LCD monitor has never been... replace laptop was bought new in store... so what drivers I EU South to this?... TOSHIBA drivers or SAMSUNG?... now I did have 60 hz refreshrate. and more details:

  General information
  Name of the monitor: Samsung LTN170X2-L02
  Name of the monitor (FAB): SAMSUNG LTN170X2-L02
  Serial number: unknown
  Date of manufacture: week: 0 year: 2006
  Monitor the material ID: Monitor\SEC3847

  Maximum vertical size: 23 cm
  Maximum horizontal size: 37 cm

  Advanced settings
  Input signal: digital
  Display type: RGB color
  Gamma factor: 2.20

  Modes of doctors of Podiatric Medicine
  Standby: not supported
  Suspend: Unsupported
  Assets in the offshore: not supported
  Standard color space: not supported
  Preferred timing Mode: supported
  Taken by default GTF supported: not supported
  DFP 1.x Compatible: No.

  Supported video modes
  1440 x 900 Pixel Clock 96,31 MHz 367 x 230 mm

  I don't want to burn monitor but badly wants to know if this monitor after original cut driver SAMSUNG will still work? and what refresh rate butts... ?... where I can download driver monitor, which was original installed on laptop?

  Post edited by: MzytengaM

  > I want to ask abuts what graphic drivers I use shud on Toshiba Satellite L350D 20 d?
  This question is superfluous. It s not important what display is inside. It is important to what graphics card is inside. Toshiba offer tested display drivers (graphics) for your model of laptop so please use original Toshiba display drivers.

  For your model mobile, you can find everything you need on Toshiba support and download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

• Questions about the clean Win 8 instalation on Satellite U840 - 10 M

  Hello

  I'll do a clean install of win8 in my laptop. However, I want to ask 2 things:

  1 - is the SRS Sound driver available for 8?

  2. for purposes of formatting, I know I will need to put the hard disk usb and load drivers during the initial phase of win8 install, right? otherwise, hard drive will not be displayed in the list... right? And. What partitions?

  2.1 HARD drive - I won't touch in 14.29 GB Partition, because it is toshiba recovery image right?

  2.2 disk - other partitions I'll delete and create new ones for win8.

  2.3 SSD - do I need to configure anything for Cache SSD? (ie: intel Center Quick config?) or win8 it automatically detects and install it? I'm afraid of this part, because I've seen users trying to config SSD intel quick Center hollow and the end spoil the SSD = solution was only of RMA.

  Thank you

  > 1 - is the SRS Sound driver available for 8?
  Hmm have you visited the page of the Toshiba UE driver and checked this?
  I found this driver: [SRS Sound Driver 1.12.5000 Win 8 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7520 & selSh ortMod = null & language = 13 & selOS = 42 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 84611 & OSI D = 42 & driverLanguage = 13]

  > 2 - for formatting of the purpose, I know that I will need to put the hard disk usb and load drivers during the initial phase of win8 install, right? otherwise, hard drive will not be displayed in the list... right? And. What partitions?

  You can add the Intel RAID driver in case the HARD drive wouldn't show. Read this
  http://APS2.toshiba-tro.de/KB0/TSB2903E20000R01.htm

  > 2.1 HARD drive - I won't touch in 14.29 GB Partition, because it is toshiba recovery image right?
  Recovery image does not work after installing Win 8. Then create recovery disk before installing Win 8

  > 2.2 HDD - other partitions I'll delete and create new ones for win8.
  You choose the partition where the Windows 8 would be installed. Check above document.

  > 2.3 SSD - do I need to configure anything for SSD Cache? (ie: intel Center Quick config?) or win8 it automatically detects and install it? I'm afraid of this part, because I've seen users trying to config SSD intel quick Center hollow and the end spoil the SSD = solution was only of RMA.

  I think that you don t need to configure anything during the installation of Win 8.

• Question about the universal power adapter car for Satellite U500

  There are different types of adapter car 12 volt on the market with different powers - that's good, but some "automatically select the output voltage.
  These units have a reputation of reliability or security for the laptop or are they to be avoided?

  Hello

  The problem is that in most cases these s universal adapter takes care of different intensity values
  You can change only the value of the Volt, but not the ampere ampere would change automatically and depends on the selected Volt.

  I would not recommend these universal adapters because the laptop needs some value ampere
  I recommend buying an adapter that is designed for this laptop to avoid some hardware problems

  Get in touch with the local ASP to get such part

• Question about the symbol of control volume on Satellite P22 - IEE

  I recently bought a Satellite P22 - IED and all in all very happy. One thing that I find quite annoying is the volume control. Is there a way to see how much you are either turning up or down without hovering over the volume in the taskbar icon?

  On my old laptop when I turned the volume upward it appeared on-screen to show me my present volume and so I could go up or down to suit, now it's pot luck!
  Any help is greatly appreciated.

  The P22 - IEE Satellite does not for me. Please check again the series and post it here

• Question about the maximum amount of RAM on Satellite U400-10J

  Hi all!

  2 weeks ago, I bought Satellite U400-10j.
  Now, I want to extend the RAM.

  This chipset is inside my laptop?

  Does he really support only 2 GB of RAM?

  Hello

  I wonder if you have checked the user manual installed which must be preinstalled on the laptop.

  In any case, as far as I know that the memory on U400-10J can be upgraded up to 2 GB of RAM (2 x 1 GB).
  DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules are compatible and it seems that the Chipset Mobile Intel GL960 Express was built in.

  Hope I could help you

• A few questions about the upgrade on Satellite A300-144

  Sorry for the typos, English is not my mother tongue.
  I want to ask some questions about the upgrade of a300-144.

  * Some info first.*

  CPU: T2370 ([http://ark.intel.com/products/34445/Intel-Pentium-Processor-T2370-1M-Cache-1_73-GHz-533-MHz-FSB]).
  Chipset: GM965 ([http://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller]).

  * Questions.*

  1. my frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  2 Intel said that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?

  3 I know, taken of my CPU is μFCPGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 ([http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB]) is a compatible processor or there are some limitations in the BIOS?

  > 1. My frequency of laptop memory at 533 MHz, supports 667 MHz memory controller, memory modules can work at 667 MHz. Is - this because CPU FSB 533 MHz frequency and new processor at 667/800 MHz FSB will fix it or it is hardcoded in the BIOS?

  The speed of the memory is related on the material. This means that the FSB is responsible for the limitation.
  If the FSB would allow support 667 MHz then the memory would also at this speed.

  > 2. Intel says that the size of max memory for my chipset is 4 GB (2 x 2 GB), but Toshiba says that only 2 GB (2 x 1 GB), who is right?
  The memory depends on the chipset. So if the chipset supports 4 GB of RAM, you should be capable of this move to 4 GB of RAM

  > 3. I know, my CPU is? FC-PGA-478 aka socket P, max FSB 800 MHz, max 35 W TDP, so T9500 (http://ark.intel.com/products/33918/Intel-Core2-Duo-Processor-T9500-6M-Cache-2_60-GHz-800-MHz-FSB) will be a compatible processor or there are some limitations in the BIOS?

  It might be possible that the new processor would be fully supported by the BIOS, but in most cases it should not be a problem if the chipset would support the new processor.
  But as far as I know the upgrade of the CPU is not supported by Toshiba or any other manufacturers of portable and its your own risk to run laptop with the new processor.

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• Questions about the export of PDF with India CS5.5

  Hey all,.

  A few questions about the export to PDF of the most recent version of India.

  First of all, I noticed it seems to take much more time to access a PDF file. Any suggestions about how to speed up the process? It took 8 minutes to generate a PDF low resolution (for printing) of a document of 24pp with placed images and vector graphics. Wow, that's a long wait, especially for evidence.

  Second, the background task... If I get it will make this PDF of 8 minutes and then more work on the document, which is exactly in the PDF? Usually, I have save before making a PDF or printing. Thus, the latest version is saved which will be in the PDF?

  (Either incidentally, this ability to work on the doc while generating a PDF file seems kind of weird. Generally, we do a PDF for proofing, or even for printing, when any changes have been made and that everything is "final". Therefore, I see no advantage in being able to work on my document while it is making a PDF file, I am probably once your revisions for the moment. I must say that I like the progress bar that you get when you perform an interactive PDF, as you know that you can not work on the document when it is on the screen...)

  Thank you as always.

  Good, people. Wanted to just follow this and post my results. It turns out that the problem is somewhere in the Illustrator file. I never had the time to guess what work plan was the culprit. Other India files PDF files is transparent and not a lot of time.

  No resolution, unfortunately, just good to know that it is not all India files on my system. Phew!

  THANK YOU for your advice.

• A few questions about the difference between the Satellite P70, L70, S70

  Hello, I have a lot of questions about the P70, L70, S70 series that come with a 1920 x 1080 panel.

  (1) what are the differences between the L70 and S70 series? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  (2) P70, L70, S70 doesn't support a 2nd HARD drive or it's just the P70 series that support?

  (3) all the three (P70, L70, S70 series) come with the same TFT panels?

  (4) of the above series, which supports mSata?

  (5) all the model of each series are delivered with support from mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?

  (6) all the foregoing, are delivered with a S - ATA II or III S - ATA interface?

  (7) who is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.

  Thank you in advance.

  > (1) what are the differences between the series L70 and S70? With the exception of the RAM and HARD drive capacity, books seem pretty identical.

  What models Sat L70 and S70 do you mean exactly? There are different L70-xxx-xxx and S70 models on the market that supports different hardware specifications.

  (> S70 2) P70, L70, support a 2nd drive HARD or is - it just the series P70 that support?
  As you can see in this [Sam P70 HDD replacement document, | http://aps2.toshiba-tro.de/kb0/CRU3903II0000R01.htm] the P70 series supports the 2nd drive Bay HARD, BUT even if there is a 2nd HARD drive Bay, this does not mean that you can use the 2nd HARD drive. In the case where the 2nd HARD drive Bay are equipped with HARD drive connector, you can use the 2nd HARD drive

  I also found the [Sam L70/S70 HDD replacement | http://aps2.toshiba-tro.de/kb0/CRU3703HG0000R01.htm] the document on the Toshiba page and there I see this 2nd HARD drive Bay is not available

  (> 3) all three (P70, L70, S70 series) come with the same TFT panels?
  See point 1). Different P70, L70, S70 models were equipped with different material parts.

  (> 4) of the series above, which takes in charge mSata?
  As far as I know that some P70 models are equipped with an mSATA SSD of 256 GB.

  (> 5) do all the model of each series are delivered with support mSata? For example, it could be that L70 - a - 13 m supports mSata is not the case of the L70-a-146?
  See point 4) not all models supports the same hardware specifications

  (> 6) all of the above, come with a S - ATA II or III S - ATA interface?
  I don t think that SATA III is supported. I guess it would be SATA II

  (> 7) which is the best of these series listed? I'm trying to understand what makes the big difference of S70 to P70 except for the envelope for example.
  Not easy to answer because there are too many models released in Europea.
  And not all models are available in each country. So I guess you will have to look for the models that have been released in your country.

• Question about the recovery partition

  Hello.

  I have a question about the recovery of HARD drive partition.

  If I do the operation to clear the hard disk option in the wizard it will remove * all * or it will keep my partition recovery in this way I can come back later. I want to know because I would like to put on a different OS.

  I know he said he would, but caution in the PDF, I found it says that on a normal recovery too (that he would remove each partition) and I'm a little confused about how the recovery actually worked.

  Thank you.

  Hey Buddy,

  To be honest I n don't know what you mean exactly with this option to erase.

  In General, Toshiba Recovery disk will wipe your entire HDD to restore factory settings correctly. This means that if you start from that disk and follow the instructions on the screen, everything will be removed.

  In addition, the recovery disk doesn t create a recovery partition. It is not available. Disk copy just the files on the second partition in folder HDDrecovery to start an installation of HARD drive recovery.