Questions AS3 Timer and navigation

Similar Questions

• Big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

  So we're all aware of the issues with vCenter 5.5U1 WebClient and how we are forced to use it to make use of all the features of the v10, vDS 5.5 vHardware (config switch changes the synchronization problems if an emergency change is done on c# client vDS) VSAN only available via the web client, flash, sluggish to questions do not respond the questions and the list goes with the presentation of the menus and hard to navigate, issues SSO (always after 5.5 upgrades)

  So @ VMware vCenter Architecture Team is going to make an effort to hear and give due to the much needed performance improvements and improvements to the user interface before adding more features and SSO type services which majority of clients don't use not and not force it's customers continue to loose faith its vCenter product?

  Looking for answers with options to remove vCenter 5.5 U1c installation as well as a promise to answer to these in vCenter 6.0 version!

  Here is your answer. First of all, to use Chrome as your browser, then you need to go with at least 4vCPU * 32 GB of RAM & adjust the segment size of java for SSO, Tomcat, (TC) Management Server, inventory server and profile based storage to "refine" vCenter device with DB Oracle embedded or external memory. I did, and performance gains went 10 X. This includes the vSAN enabled running clusters. My recommendation that works very well based on design documents:

  vCenter Server inventory	VMware VirtualCenter Management Webservices (tc Server)	The inventory service	(Sps) profile-based storage service
  Large (more than 400 guests or 4000 VMS) stock	4 GB	12 GB	4 GB

  Setting on the vCenter server 5.5 of the memory unit

  • Connect the unit to vCenter server using SSH
  • VI /usr/lib/vmware-vsphere-client/server/wrapper/conf/wrapper.conf configuration file, locate the JVM memory section and change maxmemory to 4096

  Line 66

  # Memory #wrapper.java.initmemory = 512wrapper.java.maxmemory = 4096 JVM

  • /usr/lib/vmware-vpx/inventoryservice/wrapper/conf/wrapper.conf VI configuration file, find the setting. MaxMemory and replace it with 12288

  Line 116

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 12288

  • VI /usr/lib/vmware-vpx/sps/wrapper/conf/wrapper.conf find the setting. MaxMemory and change from 1024 to 4096

  On line 154

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 4096

  • Restart the vCenter device w / DB (1000 hosts) external /embedded for lab (100 guests)

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2005086&sliceId=1&docTypeID=DT_KB_1_1&dialogID=294472825&StateID=1%200%20294492358

  Documentation Centre of vSphere 5.5

  PS: vCenter 6.0 has much better performance based on my beta test... so don't lose hope yet. Many improvements to come...

  PS: I've also broken down on this here until I figured this out just recently: Re: big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

  Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

  You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

• Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Question of Safari and Chrome. indicates on the navigation screen. "An element of the Protection of the family filter does not work as expected. Restart your computer. If the problem persists, contact support.  Error: failed to hose CPI. »

  Quit Safari, Chrome to quit smoking. If necessary Forcequit.

  Start Safari while holding the SHIFT key, select the menu Safari ClearHistory, then after this check that the homepage is the one you want.

  Do the same for Chrome.

  Close all browsers, restart the mac.

• Drivers Intel blocks most of the time, and every time I try to solve this question message says: the solution to this problem can not be downloaded.

  I use OS Windows7, drivers intel blocks most of the time, and whenever I try to solve this question message says: the solution to this problem can not be downloaded. What should I do?

  Original title: problem with drivers

  Hi Pragati,

  1. What is the accurate and complete error message you get?
  2. when exactly you get this error message?
  3. don't you make changes to the computer before the show?
  4. What is the brand and model of the computer?

  This problem can occur if the drivers for this particular material is not updated.

  Method 1: I suggest you run the hardware and devices Troubleshooter and see if that helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you to update the drivers for the Intel hardware by selecting the model number from the following link:

  https://Downloadcenter.Intel.com/default.aspx

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Time and expiration time timesheet question (form)

  Yes I know this question has been asked several times but I looked through dozens of examples and many shapes "Sample" in the forums are no longer available since Adobe has changed things around. I have attached the form. I need put in place where time is not given in negative numbers for example, if a person works from 21:00 to 07:00. It needs display 10 hours instead of-14 hours (as it currently is for me). I appreciate the help! There is not 'breaks' or 'dinner' etc in this. Just a calculation between time and time.

  Thank you!

  

  Dropbox - Sheet.pdf of personnel allocation

  In TimeDiff, after this line:

  fend var = Time2Num (sTimeFormat, sEnd);

  Add this:

  If (fend

• Question TIME and YEAR in HFR (issue resolved now)

  Hi all
  
  Im having a problem with one of my HFR report
  We have time and year Sun in Essbase application
  
  now the user wants to view the data of the last 13 months i, e
  Currmonth = Feb 2009 until February 2008
  hearing that I had taken the year and time to pass.
  to pass A YEAR, I had quickly for the year, and even as the neck to the rest of other 12 passes
  and for TIME to pass A, I had taken the TIME and Relative member - guest 1 10-12 in the other passes
  
  now the question is when I run the report complete shows for 2009 only.
  in fact last 2 passes (JAN, Feb) must have for 2008 instead, it's show for 2009
  
  can someone tell me how to get the right data.
  
  Sri...
  
  Published by: SSS on September 7, 2009 16:50
  
  Published by: SSS on September 9, 2009 12:19

  set up two columns [A and B]

  For a set for the year 2008 and the month is defined as a range of prompt month up to the end of December.
  In column B the year 2009 value and set the month as a range of Jan to the Prompt month.

  If the user select "Jun" at the command prompt, they will get in column a Jun by Dec for 2008, then in column B, they will get Jan Jun 2009 (i.e. 13 months)

  You can also improve with void variables if you want and you can use members POV place fast member if you wanted.

• How to disable the Date/time and the side Pop out window of Windows 8.1

  When I move my cursor/arrow on my touchpad on my laptop 11 flow through the office, or sometimes on a web page, for example, the date and time pop - up down to left and the research / action / start / devices / Setup window appears on the right side of the screen. It makes me crazy. How can I disable this feature of the software?  If I need them, I can simple enter the windows on the bottom of the screen icon. In its current form, it is playing all the time and I want to turn it off. Thank you.

  HP PC laptop flow 11 model: 11-d010nr, product number: K2L95UA #ABA, file system NTFS, Intel Celeron CPU N2840 2.16 GHz, RAM 2.00 GB, 64-bit x 64 based processor, 8.1 with Bing Windows operating system, HP USB 3.0 flash drive 128 GB, Sandisk Ultra SDHC 32 GB FAT 32 memory card

  Hello @BubuBaby,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Notebook PC 11 workflow and settings of Touchpad not working not properly. You can disable the popup of charms by right-clicking on the desktop go to properties. In the properties of Navigation window and the taskbar, click the Navigation tab and uncheck the box - when I point to the upper right corner, show the charms.

  Here is a document on how to troubleshoot the Touchpad, if you need it.
  
  If you proceed to the section setting of TouchPad pointing the sensitivities it should help solve the problem. Enable or disable individual gestures by clicking the check box next to each item. A check mark in the check box indicates that the gesture is turned on.
  
  Hope this fixes the Touchpad settings.
  
  Thank you.

• Help! General question AS3

  I am doing my first AS3 project and I'm running into all sorts of difficulties. I don't know that I even approach the project correctly.

  My client gave me work for a Flash site which includes 4 different 'pages' each with its own animation. I need a navigation bar with 4 buttons showing at any time, to access each 'page '.

  I get all sorts of errors of null object reference, and I learned that I need removeEventListeners in the code for my button to get rid of some of these errors. But I still get a few errors that I can't understand.

  Right now the way I have my out buried project is like this:

  Some of the "pages" I did are separate movie clips with and dropped on the main timeline as an image. A "page" I just put it in the main timeline and it has an animation that spans about 30 pictures. It's always my browsing, I think, that throws any errors.

  I need some advice on how to approach the project. Should I do all movies separate swf and load them into the main movie? And the navigation on the main timeline of the main sequence? In AS2 it was a wink, but it turns out to be much more difficult than I imagined.

  All advice appreciated.

  GF

  When dealing with different content on different images using AS3 things can get weird very quickly. It is preferable not to use the multiple images and to use only the timeline based keyframing if you have vector animation. A better method is to have each section as a different MovieClip all over each other on frame 1 and just switch the visible when you want different to see the different sections. A better way is to have each section in a separate swf file that is loaded on the scene.

• I installed FireFox 21.0 4 times and I still get the message that I need to update. How to stop this nonsense?

  I installed FireFox 21.0 four times, and I always get the message that I need to update.
  How to stop this nonsense?
  Mike

  Hello mike, please refer to the article according to How to set preferences that will not save (especially the part about the user.js file), that could also apply to your question...

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• My id works, but when I want to buy something they ask questions of security and electronic security which we forgot the two. Rashida

  I forgot my security questions and answers and the email.when of security I want to buy an App they ask me to answer questions that I forgot. I sent the e-mail on Apple support many times, and today was the third time I rang for the control of Apple support. But my problem is always relative. My version of the iPad is the Version. Ability to No.9.3.1 (13E238) 114 GB. My no no Samsung phone * and my email is the same as Id *. Rashida

  < personal information under the direction of the host >

  Sending of emails are useless alone means, is that you must speak say to Apple Support & proof of your identity

  ***********

  < Published by host > phone number

• Time and date of the Iphone 6s set contacts automatically / backup

  Hi my name is Rebecca. Please be patient, this is a long story with a question to which Apple for a month and a half has not been able to solve. The end of February, I went to Sprint to upgrade my iphone 6 to a 6 s. (my 6 had no problem). The backup and restore to the other went off without a hitch. Two weeks having the phone, date and the value automatically switched to a GMT setting which is 4 hours ahead of New York. Assumption is that the phone has been deserted. I got a new phone and everything has been backed up and restored again. Less than two weeks later, the same goes for the 2nd iphone 6 s.  I went to Sprint and got a 3rd iphone 6 s. backup and restored all again. Less than a week later for the 4th time, the new iphone 6 s time and date switched to the time zone GMT 4 hours ahead of New York. At this point, I called Apple Tech support. A very nice tech Jason worked with me for 2 weeks to fix this. He sent Apple a 4th iphone 6s. We did a backup and when the new phone came in did us a restore. A few days later, the same problem. Apple accuses Sprint, Sprint complaint to Apple. At this point, Sprint said that my sim card was corrupted and he sent me a new. On the phone with Jason, we did a reset of the iphone 6s failing manufacturers. Removed the corrupted sim card and put in a new vacuum. Phone restarts and when you get to the Setup screen, it asks "set up as a new user or a user to return. Jason said as a new user.  I clicked on new user. Following her request for an apple ID. Jason said I should put in my existing apple id (although it has been activated on as a new user). At this point the phone wouldn't turn on. On the phone with Sprint. They did not understand as to why the phone would not activate. Jason suggested that I put my original sim card in (which was noted as corrupted), then the active phone. At this stage because I had not done a restore, the only information on my phone now an old backup who had my contacts and some of the notes, images etc. Jason said to do a restore after just 24 hours to be sure of the time and the date stay correct. Not happened. Less than 24 hours, the date and time that is set to automatic changed to the GMT time zone. Jason was out of suggestions. We left him there. I am very angry to pay more than $800 for an iphone that feature very very important does not work. On mine, I restored my phone and thought what I'd do. I then did a backup. I'll stop my icloud. I have reset my builders phone by default and when I went through the whole upward I plugged my phone in itunes and restored my phone from my computer backup. (Icloud is always OFF). Less than 24 hours later at the date and time in GMT area again. Once again, that I have a phone very very expensive with a feature that is vital for me, I can't use. Yes, I could turn the machine off, but I shouldn't do that. So here's my question: Iphone 6, I have not had any problems with my icloud or my sim card or the date and time. 6 s IPhone that I do. I got iphone 4 brand new 6s with the same problem. Is - that my sim card is corrupt and transfer information corrupt, though only it worked fine in my iphone 6? Second question: I don't want to sign up for a new apple id and start from scratch. This will screw up my gmail which is linked to the apple ID. How can I back up my contacts only on my computer and then be able to reset my phone manufacturers by default, then erase all information from my existing apple ID in order to use again, but only restore contacts which is the worst part of transfer phones. Apps and notes, photos and all the rest is not a problem to start from scratch, but contact is almost impossible to have to type each hand one by one. Please someone out there with a solution. Thank you in advance.

  Two recommendations.

  1 post this issue on your part on the iphone forum, to confirm the number two with someone else.

  Use iPhone

  2. you must stop working with Apple. Your iPhone download the signal giving them news of the time and origin of this signal

  I have no idea, but it's not from Apple. Coming here or talk to Jason you wasting your valuable time. It is at least

  get paid for it, you're not. Every second that you type in this position, mine or every second you spent on reading

  the phone with Apple after the second phone had the same problem you've wasted talking to the wrong party. Even than calling your

  manufacturer of furnace you paid 5000 for oven when your gas is not delivered on time or bad quality. And I have

  don't say it's Sprint, cause I don't know, but it's something that gives this info to your phone.

• How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

  How can I get my menu bar on my macbook pro? The dock also disappeared. I know I have to take my pointer upwards (or downwards), but it's a waste of time and that bothers me. Its only happens on Safari, and not on other applications.

  You could try starting in safe mode:

  • Try safe mode if your Mac does not end commissioning - Apple Support

  Which can allow additional troubleshooting.

  Also, sometimes there may be a hardware problem which may help a SMC reset with

  Depending on the cause:

  • Reset the management system (SCM) controller on your Mac - Apple Support

  You can try the test equipment to see what appears in the results:

  • With the help of Apple Hardware Test - Apple Support

  Other options include an appointment with a genius of Apple Store or a

  service provider authorized Apple for the device inspected, diagnostic tests, etc.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider

  There may be system software or hardware problems, in order to solve the problems with the aim

  to see what the cause, can take time. If you have a backup in Time Machine &

  end by using OS X Recovery to see OS X Utilities usage, disk utility or

  other functions, be aware that this can make the more advanced features; It may not need.

  Because this question appears as a symptom in Safari, which makes it more curious.

  • Stop the pop-up ads and advertising on Safari - Apple Support

  http://etrecheck.com/ http://www.adwaremedic.com/index.php   

  There may be a weird extension in Safari that may relate to some adware or other

  elements, so this is another issue to consider. a report of Etrecheck may tell you if

  some candidates are there; but maybe not. I do not primarily use Safari

  so, my other two browsers work slightly differently.

  Good luck & happy computing!