Questions of BitLocker read only not my USB key at startup to test before encryption Win 7 ultimate

Similar Questions

• BitLocker without TPM refuses to recognize the USB key at startup.

  I have a Windows 7 PC, I'd need to BitLocker, but it fails to recognize the USB key at startup. I've resorted to skip verification and now enter the recovery key every time you start (this PC has a lot of data on what should be confidential), but it's not ideal.

  What is curious to me, is that the computer will start perfectly fine from a USB key, or produce a message of type "non system disk or disk error", if the USB key in question is not bootable. So it is not a matter of lack compatibility USB BIOS. When Bitlocker should read, yet there is no actifvity on the USB key. It seems to just try to read the empty floppy drive then give up.

  The PC is an all-in-one RM with an Intel D915GX motherboard.

  I tried two different USB, 64 megabytes cheapo player drives I usually use as a Bitlocker key and a 2 GB Cruzer Blade. I mucked with some of the BIOS settings but not in a particularly organized way. And I checked the key file is saved on the disk. Everything I did, Bitlocker will not always see the USB.

  Any suggestions?

  Hello

  Thank you for you answer and share the status of the issue.

  Sorry for the late reply.

  I suggest you to please update your motherboard chipset drivers

  Follow the link below:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=1676

  You can also check the drive (that you encrypted) to find errors by following the link below:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Additional information:

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx #BKMK_USBDrive

  Deployment Guide for Windows 7 BitLocker Drive encryption

  http://TechNet.Microsoft.com/en-us/library/dd875547 (v = ws.10) .aspx

  Hope this is useful

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to show total for an Object(read only, not based on entity) view based query

  Hi Experts,

  JDEV version 12.1.3.0

  I want to show the total of column salary for reading only VO (not based on the entity, but the query based).

  The readonlyVO has some display criteria to display the data. So the total should appear only for values, I see in the user interface.

  Thank you

  Roy

  Looks like JDEV problem which was not allowing me to add the transition attribute. After the reboot of jdev im able to add the transition attribute.

• BitLocker fails with a duplicate USB key

  I have recently upgraded to Windows 7 Ultimate. I did it for use Bit locker.

  I successfully encrypted the drive, changed my group policy and created a key on a USB key. It's all works.

  I created a key duplicated on a USB key, but PC does not start - it hangs on the next screen

  ********

  Windows Loaded Bitlocker Drive encryption key

  Remove key storage media

  *********************

  Remove the usb key makes no difference.

  I checked that the file is correctly copied to the USB. I also tried with several other sticks.

  All thoughts welcome.

  
  

  HI PaddyMullaney,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows 7 Security Forum. Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: My Satellite L350 does not recognize USB key

  I have a Toshiba Satellite L350-235. It suddenly stopped recognizing my usb key that I use every day. Normally, he would say "new hardware found" and allow me to click on the F drive, now I get nothing!

  Can someone advise me?

  I guess that the USB ports are working properly if you connect another device; something like USB mouse. Right?

  In my opinion, you should test the USB in USB ports.
  You can also try to remove the USB controllers and hubs from the Device Manager list.
  After restarting of new laptop, (ports) USB controllers must be recognized, and then you could connect and test the USB again.

  In the event that the USB is not recognized by one of the available USB ports, try to connect to another USB key.

• Does not install USB key wipe completely?

  It is probably a little silly question, but here goes.

  Install ESXi 4.1 on a USB key format first, or is it better to format the stick before installing? It is more of a curiosity thing a question.

  Thanks for the treat me

  In my lab, I usually erase them / format before using a stick for ESXi, but above all to make sure that there is nothing that I want. I find new ways of production.

  The installation will show that contained the stick, if there is something.

• CD rom read only not on vista

  Hello

  Im having the same problem, as mentioned in another post my cd/dvd-rom is not reading correctly.  I tried every fix ive seen.

  I have since reinstalled from a seprate patition lose all data, once again no signs of problems, errors, or warnings anyware and yet still no solution.

  I then ran the car fixit in the section trouble shooter, but it only allows me to play perchesed cd I can't play movies or re-install my disc games or software.  I can not even boot drive (but I can play the CD), err

  Help, please!

  Hello

  Gateway is still there.
  http://support.gateway.com/support/default.aspx

  Even if the OEM disc is still made by Optiarc and they will know the setting if they want to
  to help you.

  Try what someone might have the same or similar player. The answers will be equipped with these sources.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  And of course the driver could be bad.
  Rob - bicycle - Mark Twain said it is good.

• DVD rw drive in M18x read only not the dvd or cd.

  Hello. Hoping that I can get help with what I purchased my Alienware m18xr2 in July of this year was never really used the DVD or CD readers until this weekend and found that I could not read any DVD or CD tried DVD movies and data DVD also the same with CD DVD drive in question is a HL-DT-ST DVD +-RW GA31N. It appears in my computer and the Device Manager and BIOS, saying his work properly but when I insert a CD or a DVD that it accepts in the slot load makes a noise as if the laser is set but the CD or the DVD turns not to the top. I read in forums on how to solve the problem, I tried upgrading the firmware to the last and that did not solve the problem. Tried to do a full shutdown and diagnostics even starting with alien autopsy, he finds no error, and at the moment I am at a loss I may need to get in shape quickly and the windows dvd does not read in the drive.

  could you please send me a private message with your serial number or express service code so that we could find another solution for you.

• HTTPService read only not update xml, I had manually update the xml code in my browser

  I called a HTTPService (id = data2php) that runs a php script that creates an xml doc and put it on my server. I then called another HTTPService (id = feedRequest) that reads the xml document, then I try to fill a datagrid with the lastResult my HTTPService that reads the xml doc. My question is that the HTTPService that reads the xml doc reads the previous incarnation of the doc xml, not the newly created that created my HTTPService (data2php). I've been manually the xml doc is going in my browser and hit refresh for my HTTPService feedRequest to read the updated xml code.
  
  Here is the mxml for the httpservice that reads the xml file:
  "" < mx:HTTPService id = "feedRequest" url = " http://cfcdi.org/eric/dashboard/php/sales.xml" result = "feedResult (event)" resultFormat = "xml" useProxy = "false" / > "
  
  pretty simple.
  
  (in fact, from time to time it will read the updated)

  N ° dummy Variable like this:

• CD/dvd drive read only not all disks

  When I put a disc in the drive says that there is no disk in it
  I've uninstalled and restarted the computer, and used the program fix
  and the computer says that it works correctly

  as I looked to filter things and he's not here

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  If necessary:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD drive read only not the discs in Vista

  my dvd drive doesn't read any disk, yet the device manager says that the device works properly please help

  Hi Bill,

  Please see the following article some troubleshooting on your question:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• LG DVD-RAM drive read only not the disks in Windows 7

  Title pretty much sums up it...

  I installed 7 and it works great!  But if I didn't put in the drive to load on the system is not turn it up.  I can see the drive in my computer, but he still thinks that the CD1 of World of Warcraft's inside, but it doesn't have either turn this disc.

  I got a bunch of things off when installing (HyperTransport, IDE, floppy drive), should I turn all distributed and try to load it up, just to reactivate all later?  Or is there a known solution?  Exact model is the GH22NS30. AMD Athlon 64 x 2 processor Dual Core 5400 + Black Edition; Abit AN52 nForce 520 motherboard; OCZ SLI-Ready Edition 4 GB DDR2 (PC2 6400); Western Digital WD360GD 36 GB Raptor; Raptor 74 GB Western Digital WD740ADFD; LG GH22NS30 DVD - RAM drive. XfX GeForce 8800GT Alpha Dog Edition

  Hi Rustedbucket,

  Thanks for posting on the community forum is ready for Windows 7.

  Try to remove the filters from the registry, see if that helps with this problem.

  Be sure to back up the registry on external media before editing the registry.

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  Please let us know if that helps you or additional assistance is needed on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer does not recognize USB devices after startup XP

  Computer was working fine.  Moved (by car) to another office.  At present, the keyboard will work until the time starts windows XP (SP3); It can control the it function and has a light illuminated NUMLOCK.  As XP starts, the Numlock light turns off and the keyboard is no longer functional.  It is obvious that the keyboard works, and the USB seems to be OK because he has worked with several installed keyboards until XP load upward.

  Any suggestions are appreciated!

  What type of laptop do you have? In the BIOS make you emulation USB is lit and also make sure that in XP right click on my computer got in the hardware Manager then drive and make sure that there is no '? ' marks in the screen of your driver. Otherwise, this looks like a motherboard might be on the fritz...

• Can not boot from my DVD to a format before loading Win 7

  I tried to start my (professional) win7 updated my dvd player, so I can format my C: drive before loading Win7.

  I did the necessary bios change for boot order, I get the message "press any key to boot...". ', but a touch usually takes me to my C: drive boot upward.

  I should mention that I installed win7 on my C: drive but was never an option to format the drive, and now there are still all my old files and the background image that I don't want. Otherwise, the installation went great.

  There is another thread where I was getting help and some good ideas, but he seems to have died.

  See Win7 XP update not did me not the ability to format the C: drive or delete all the old files on this drive on this link for further details.  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Win7-upgrade-from-XP-did-not-give-me-the-option-to/4ca764c3-2f45-4B2F-84b9-808ce96476c4

  Basically, what I want to know is, are SATA drives "to hot' I think the term is.

  In other words do I can unplug the SATA connection on my C: drive, see him if I can then boot in my reader DVD, then in case of success, taking the C: drive in and move forward with the formatting and reinstalling from there?

  Thank you

  You need the C: drive to the DVD player work. I tried this before. Your Windows 7 CD may be corrupted. I recommend you to speak with Microsoft by phone on this problem. Here is ther number (800) MICROSOFT (642-7676).

  Hope this helps!

  Sammy J. Of SammyShane Tech-Center Inc.