CD rom read only not on vista

Similar Questions

• CD/DVD drive read only not the discs in Vista

  My CD/DVD read more records. I put in a disc and it does not detect either he (it's as if I was never to put a), or it takes forever to load. Also, I can't read game discs so I can't play my games. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD rom read as not all w 7 disk drivers are updated and without errors

  Update vista to 7 w when the computer starts there is no icons or taskbar and cd rom does not read any disk says it all works fine without error

  Hello

  References to Vista also apply to Windows 7.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can you correct "setting WARNING F unspecified chkdsk in read-only mode" to Vista? __

  'WARNING F parameter not specified chkdsk in read-only mode '.

  did you try chkdsk /f?
  

• How to show total for an Object(read only, not based on entity) view based query

  Hi Experts,

  JDEV version 12.1.3.0

  I want to show the total of column salary for reading only VO (not based on the entity, but the query based).

  The readonlyVO has some display criteria to display the data. So the total should appear only for values, I see in the user interface.

  Thank you

  Roy

  Looks like JDEV problem which was not allowing me to add the transition attribute. After the reboot of jdev im able to add the transition attribute.

• DVD drive read only not the discs in Vista

  my dvd drive doesn't read any disk, yet the device manager says that the device works properly please help

  Hi Bill,

  Please see the following article some troubleshooting on your question:

  http://support.Microsoft.com/kb/982116

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD/dvd drive read only not all disks

  When I put a disc in the drive says that there is no disk in it
  I've uninstalled and restarted the computer, and used the program fix
  and the computer says that it works correctly

  as I looked to filter things and he's not here

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  If necessary:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• Age of Mythology Gold Edition works only not with Vista 64

  Ok. Same computer. Different operating systems it works very well. It is a problem of Vista 64. When I start Age of Mythology or Age of Mythology Titans he keeps asking the number of CD 1. This version came on a DVD. Even if the DVD is in the DVD player I am always asked the same question. What is going on? How should I do? Oh! The other operating system, I've tried is 32-bit Windows XP. Yes it is a 64-bit computer.

  For those who are interested,
  I tried all the proposals by Gloria. No worked. There is no update I can find on the Microsoft Web site. So! If you want to use your Windows XP games, you need to do. It is still possible to run the 32-bit of Windows XP on a 64 bit system. I created a system boot duel using Vista 64-bit and 32-bit of Windows XP. The system is set to boot Vista normally. You can select Windows XP 32 bit on startup when you want your 32-bit games. I was forced to do it with my MSTS as well. I have a control RailDriver. There can be no drivers 64 bit at the time of writing.
  The foregoing is shared so that others can benefit form, what has been done. By the way. Not all 32-bit games need this treatment.

• LG DVD-RAM drive read only not the disks in Windows 7

  Title pretty much sums up it...

  I installed 7 and it works great!  But if I didn't put in the drive to load on the system is not turn it up.  I can see the drive in my computer, but he still thinks that the CD1 of World of Warcraft's inside, but it doesn't have either turn this disc.

  I got a bunch of things off when installing (HyperTransport, IDE, floppy drive), should I turn all distributed and try to load it up, just to reactivate all later?  Or is there a known solution?  Exact model is the GH22NS30. AMD Athlon 64 x 2 processor Dual Core 5400 + Black Edition; Abit AN52 nForce 520 motherboard; OCZ SLI-Ready Edition 4 GB DDR2 (PC2 6400); Western Digital WD360GD 36 GB Raptor; Raptor 74 GB Western Digital WD740ADFD; LG GH22NS30 DVD - RAM drive. XfX GeForce 8800GT Alpha Dog Edition

  Hi Rustedbucket,

  Thanks for posting on the community forum is ready for Windows 7.

  Try to remove the filters from the registry, see if that helps with this problem.

  Be sure to back up the registry on external media before editing the registry.

  1. Click Start
     Collapse this includes this image

     

     type regedit in the Search box, and then click regedit in the programs list.

     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  2. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

     Warning There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

  3. In the pane, click UpperFilters, and then click Remove.
  4. Click Yes to confirm the deletion of the UpperFilters registry entry.
  5. In the pane, click LowerFilters, and then click Remove.
  6. Click Yes to confirm the deletion of the LowerFilters registry entry.
  7. Exit the registry editor and restart the computer.

  Please let us know if that helps you or additional assistance is needed on this issue.

  Kind regards

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD rw drive in M18x read only not the dvd or cd.

  Hello. Hoping that I can get help with what I purchased my Alienware m18xr2 in July of this year was never really used the DVD or CD readers until this weekend and found that I could not read any DVD or CD tried DVD movies and data DVD also the same with CD DVD drive in question is a HL-DT-ST DVD +-RW GA31N. It appears in my computer and the Device Manager and BIOS, saying his work properly but when I insert a CD or a DVD that it accepts in the slot load makes a noise as if the laser is set but the CD or the DVD turns not to the top. I read in forums on how to solve the problem, I tried upgrading the firmware to the last and that did not solve the problem. Tried to do a full shutdown and diagnostics even starting with alien autopsy, he finds no error, and at the moment I am at a loss I may need to get in shape quickly and the windows dvd does not read in the drive.

  could you please send me a private message with your serial number or express service code so that we could find another solution for you.

• HTTPService read only not update xml, I had manually update the xml code in my browser

  I called a HTTPService (id = data2php) that runs a php script that creates an xml doc and put it on my server. I then called another HTTPService (id = feedRequest) that reads the xml document, then I try to fill a datagrid with the lastResult my HTTPService that reads the xml doc. My question is that the HTTPService that reads the xml doc reads the previous incarnation of the doc xml, not the newly created that created my HTTPService (data2php). I've been manually the xml doc is going in my browser and hit refresh for my HTTPService feedRequest to read the updated xml code.
  
  Here is the mxml for the httpservice that reads the xml file:
  "" < mx:HTTPService id = "feedRequest" url = " http://cfcdi.org/eric/dashboard/php/sales.xml" result = "feedResult (event)" resultFormat = "xml" useProxy = "false" / > "
  
  pretty simple.
  
  (in fact, from time to time it will read the updated)

  N ° dummy Variable like this:

• Re: With DVI-d port PA3542E-2PRP Dynadock not working only not with Vista

  Hello

  I have a new laptop under Vista Home Premium.
  First thing I'm trying to install is the driver Toshiba Dynadock - new model of a PA3542E-2PRP (with DVI port).

  Immediately ythe driver is installed, an alert appears explaining that the color palette will be changed because of the incompatibility. In others, the laptop screen turns off completely (until I have remove the connection to the dynadock, when she returns to normal). I then install the updated driver from the site Web of Toshiba (proposed in previous thread by Eldorado 17 Jul 07). I have trouble to install it correctly, but when I do, it corrupts one of the laptop video cards.

  It have since then done a 'restoration' on the laptop, so am at square one. However, I am wanting to continue using the Dynadock if possible - of the very welcome suggestions please!

  Thanks in advance

  If I understand correctly, you were able to install the software on Vista Dynadock, but now the graphics driver installed doesn't work as it should I am mistaken?

  Well in your case I n t see no problem with Dynadock but driver you graph. Therefore, an update of the graphics card driver would be desirable

• Questions of BitLocker read only not my USB key at startup to test before encryption Win 7 ultimate

  My computer hp laptop has TPM and bios is up to date as far as I know. To be honest, I'm sure that's not bios issue or a USB problem.

  I scoured internet and found the same unresolved issues with no will. For some reason any bitlocker app WILL create a key USB and MPT will be turned on. However, and fortunately, when I leave a test before the actual encryption process, Bitlocker will give me an error code saying that the key could not be detected on the USB after the reboot.

  If anyone of you has a real address and went through this answer please. If you don't know what you are talking about please pass. I just need to run more.

  Thank you and much obliged to those who can solve this problem.

  After deducting - more to guess and pray - I tried two things. Firstly I have updated the bios on the Hp page. To be honest I don't think it was the cure.

  What I think don't have it really that my USB drive has not been formatted to NTFS. Effing Windows says nothing of this during the test before encryption. I strongly advice that this is done before you encrypt, then check the box before you start! USB is in FAT32 or whatever and once I transferred all the files on hard drive and then deleted everything I formatted, it new and transferred all back. I then tried again to encrypt and Windows Ultimate edition finally recognize the encryption key on the USB port and have begun to encrypt - which takes a lot of time on my 500g SSD.

  before to make this mark of course, you delete the previous Bitlocker and TPM key facts of the attempts failed, so you don't get confused. The computer that is known, but unless you wrote, or have a photographic memory, you might get confused as well.* *.

  In addition, I don't know if it would have made a difference, but I reset the Bios to factory settings before the the reattempt and I deleted the password BIOS TPM preceding on the USB as well, so I'm not confused. My system is pretty bone bare, so nothing has been maleffected. Restart the BIOS will ask you if you want to make these changes or not.

  I hope this helps. I know that whenever I'm searching for answers here they never really. Most of the answers just to get out of the people *. See you soon!