Questions of navigation menu when the visitor is on each Blog page or new

Similar Questions

• The line of the last line of each table page is going to be missing.

  Hi Experts,
  In OBIEE 11.1.1.6.0, I have a report contains more than one line. "When I click on" PDF "Print", the last line of each table page line will be missing. " Why?
  Are you facing the same case? How soluve this question? Thank you.

  Hey Kobe,

  The question, looks lke a bug. Here's the work around, change the table view, click the properties of content next to the text "Table" (at the top of the columns and measures) in the layout-> position In Border pane to choose custom and select only the bottom edge (horizontal line). Now export to pdf format, you must see the border for the last row on each page.

  Kind regards
  DpKa

• How to restore the new tab button in the navigation menu when it is not available in the Customize?

  The new tab button disappeared from my navigation menu. None of the changes or upgrades have been made. While all subjects of support suggest going to customize the toolbar, the new tab button is gone either. There in the morning, disappeared in the evening without apparent reason. The + is at the end of the series of tabs, but not in the navigation toolbar and tab add + is NOT anywhere on a page it there is that a single label. I HIDE TAB BAR WITH ONE TAB 1.1 but have had for weeks, and the new tab button was always there. How to restore the button tab on the Navigation bar if it is not available in the choice to customize the toolbar?

  Don't you see the new tab button on the tab bar if you open the window customize?

  If you do not see an item on a toolbar in the toolbar palette and then click the button "Restore default" to restore the default toolbar configuration

  You can check the problems caused by a corrupt localstore.rdf file and try to delete this file.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• do not display menu when the program is not running

  Hi, I did with an XControl I can start the program with a start button.
  I deselected the toolbar, Run and Abort button when runnning and the program runs with only a custom Menu, just like I want.
  When the program stops the menu and the toolbar is visible (as usual). My question is - can you choose not to show the menu and the toolbar when the program does NOT work?

  During execution of the edit mode, it seems reasonable to return to editing mode later.

  Once the program is distributed to end users, edit mode is meaningless. Built in a standalone application or at least to define its 'open operation' and close once. The program should never be in a stopped state. Create a state machine passing the State idle when it's not what anyone.

• In the start-up procedure, how can I remove "press ESC to access the Start Menu" when the machine hangs at the HP logo screen?

  Hello

  I am running 64 Win7HP on a laptop HP dv3, processor Core 2 Duo 4 GB DDR2 Ram, 320 GB HD, just as it came out of the box when purchased directly from HP replaced EXCEPT Vista OS with 64bits Win7HP.  Machine worked fine until the LAST update of Windows, where during the reboot, I got to the HP logo screen and in the lower left corner of the screen appeared the statement (for THE FIRST TIME) "Press ESC for the Start Menu."  Pressing Esc translates into another command "press Esc...".  Break. " When you press ESC, you get a black screen until the machine goes to sleep UNLESS you press Ctrl + Alt + Delete. If you press the 3 key combo, it will continue to start and brings you to the screen of your password for access and then operate nicely, until you turn off the system. So, how can I get rid of the superfluous instructions and get this thing here where he turns and goes directly to the screen of password without intermediate steps?  Restore points are long since gone for immediate access to the front last Win Update.
  The answer may be simple, but until now it has escaped my low range.  Any help is appreciated.
  Creyn1

  Hi Creyn1,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, it looks that you are facing a problem when connecting, he would be grateful if you can answer this question in order to help you further.

  Do you receive an error message or error code?

  I suggest trying to boot in safe mode and check if it helps.

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  If its working fine with safe mode then put the computer in a clean boot state, then check if that helps you

  Put the computer in a clean boot state and check if any third-party application is causing the problem, as the start-up boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  If you have any other questions or you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Is it possible to dynamically update the price of the product when the visitor selects a new attribute of product?

  I'm fighting to get the price of the product to be updated dynamically when a visitor selects an attribute of the product in the menu dropdown.

  Has anyone successfully put in place?  With the help of javascript (JSON tags?) I see that the examples have been provided to change the image of the product - but not the price of the product. ()http://helpx.adobe.com/business-catalyst/partner/product-inventory.html()

  Help or direction would be greatly appreciated. Thank you very much.

  Was looking for my previous post and came on this thread, I hope that if someone of other googles in there is a solution in this thread:

  Re: Product attributes price calculator

• Make firefox tabs auto size similar to chrome, rather than having the arrows of navigator tab when the tab width is full?

  I want the legs to the size / auto-shrink when the width of tab bar is full instead of adding an annoying extra step of the navigation arrows...

  any suggestions?

  Suggestion:
  https://addons.Mozilla.org/en-us/Firefox/addon/custom-tab-width/

• display the text in the navigation bar when the user connects

  Hi all

  I'm (still ) on Apex 4.2.6.

  Currently, I have in my page templates, the following code snippet:

        <div class="logoBar">
            <img src="#IMAGE_PREFIX#themes/theme_125/images/logo_.png" />
            <h1><a href="#HOME_LINK#" id="uLogo">#LOGO#</a></h1>
          <div class="userBlock">
            <span>Username: &APP_USER.</span>
            #NAVIGATION_BAR#
          </div>
        </div>
  

  I have an obligation to display the user name (APP_USER) and of the company the user works for point Application AI_COMPANY, only when the user is connected. When the user is not connected; instead of these elements, I must show a connection link. Well, I know how to display a link to the login page, only when the user is not authenticated, using the navigation bar. Currently, when a user is not authenticated; the page shows: username: person. It's because he's in my page template. How can I show only the user name when the user connects? And then only display the name of the company?

  My first thought was to add an item in the navigation bar. But these elements comes in the form of links. Is it possible to add a navigation bar element and let it display as text? Of course, I could write a dynamic action on page 0 to remove the link, but I'm looking for a nicer sollution or better.

  I have apreciate your help!

  I take it, you use the same model of your home page and login page.

  You could use 2 different models or get out your elements in your model and put them in page 0.

  You can then make them conditional based on the number of page

  Gus

• How to display a drop-down menu when the user clicks on a point on lineseries?

  Hi all

  I am new to flex development.

  I watch the series online on the Board, I would like to give a response when the user clicks on the "point" on the line, I want to display a menu drop down and react to the choice of the user on the menu item.

  Is this feasible? Any sample or reference?

  Thanks in advance.

  Jack

  I prefer to use itemClick localX or stageX, according to me, one of these will help you get what you want.

• Close the option when the hyperlink is set to open in a new window or tab?

  Hi, apologies if already covered. I tried without success! I have a menu with put hyperlinks to open other pages in a new window or tab that works very well. However, would like to be able to create a 'close' button when you click it, will close this particular window or tab and return to my home page (if you can bring back them to the page they sail originally-that would be great!).  The idea is not to leave the visitors with a lot of windows or tabs open because they don't know, they can close that they are viewing and my site remains open in another window or tab. Any help or advice on this would be really appreciated.

  Hello

  In case you need it, please visit this link

  JavaScript to close IE6, IE7, IE8 and Firefox without confirmation box? -Stack overflow

• Help! JavaScript works not when the object is moved from one page to the other!

  Hi all:

  I am new to Adobe Livecycle Designer (version 8.0). I created an interactive pdf form of 3 pages with many objects (text fields, radio buttons, drop-down lists, etc.), our company wants to quickly start to use.

  I'm having trouble with some of my Javascript does not not with some of my items on page 2 of the form. Specifically, there is a drop down menu to "Country" on page 2 of my form. When the user selects, for example, 'United States' in the list, I have the Javascript code that is supposed to change the 'currency' list drop-down to "Dollars" rawValue accordingly (on the change event).

  I think that my Javascript syntax is correct, but I am not sure. Here's my simple Javascript associated with the "Country" drop-down list (Note: rawValue 80 = 'United States' and 105 rawValue = "US $"):

  -

  ---

  Form1. Page1.cmbContactInfoCountry::change :-(JavaScript, client).

  ---

  If (this.rawValue == 80) {}

  cmbCurrency.rawValue = 105;

  }

  It sounds pretty simple and it WORKS when my "Country" drop-down list is moved to page 1 of the form, but it WON'T WORK when I move the combo box "Country" return to page 2 of the form (i.e. where it belongs).

  Anyone has suggestions or solutions? I spent probably 6-8 hours of racking my brain trying to figure out why it works when on a single page, but it does not work when to move to another page. I guess I can have corrupted something OR that I not address fully the proper name of the object?

  Help, please!

  Frustrated and helpless, near Chicago.

  Taylor T

  Yes, it's a quirk of... in the drop-down lists when you select an item in the DOF it is not committed until you exit the field, unless you do the following:

  If (this.boundItem (xfa.event.newText) == 1) {}

  cmbCurrency.rawValue = 1;

  }

  ElseIf (this.boundItem (xfa.event.newText) == 2) {}

  cmbCurrency.rawValue = 2;

  }

  The xfa.resolveNode stuff was not necessary that both objects are of the same subform, and as such can 'see' each other.

  Think like a folder structure subforms - elements can see what is in their own folder but will say where to find things in other folders. If cmbCountry was subform1 and cmbCurrency was so in subform2 that rawValue above lines would look like:

  subform2.cmbCurrency.RawValue = 1;

  It's a good idea to name all your objects, subforms, etc. it is to work with script is much easier - so you won't have to deal with things like these pieces of xfa.resolveNode you had before (as well). He ones because you have more than one subform called "subform", the number of hooks is the Instance number (when you have several of the same object) if the program has to differentiate between the various "subform".

  The number of instance come in handy, but for things like the rows of the table and so on when you need to make calculations.

• Error when the search used OA framework running page

  Hi all
  I'm new to the framework of OSTEOARTHRITIS. I am trying to create a simple search on the EMP table page and table DEPT in schema SCOTT. I defined the EMP and DEPT EO and VO too. I also defined purpose of the association. When I try to run employee search page it is throwing following error:
  
  "Error (13.8): chola.oracle.apps.fnd.schema.server.DepartmentEOImpl of the class must be declared abstract; It defines no setLastUpdateLogin (oracle.jbo.domain.Number) method in the oracle.apps.fnd.framework.server.OAEntityImpl class.
  
  What I understand of this error, it is that since my table EMP in the Scott schema is not have last update columns for Jdeveloper has not generated method LastUpdateLogin. Am I wrong? If I am not mistaken, this means I can't question on any table who don't APPRECIATE columns last time updated, updated By etc... but this isn't the case.
  Can you please guide me where wrong me?
  
  Concerning

  Hello

  Your table does not contain THAT columns, 5 columns of WHO, please indicate in the Dept table, this will work.

  Kind regards
  Out Sharma

• I want to take the source code of each Web page as input and address on it, how can I do this?

  I'll develop an add-on for mozilla firefox, but for this I need the source code for each page. This is necessary to find the tag button inside the source code, to search for the tag href in the source code, etc... So please help me for this.

  The forum of the add-on is here:
  https://forums.addons.Mozilla.org/

• How can I keep my Active parent menu when the activation of underlying submenu items?

  Using the submenu, how would manipulate the behavior of the tab menu parent active (active state)? For example, the parent menu = portfolio, submenu consists of 2 items, photographs and drawings. When you click on one of these tabs, the parent (portfolio) tab turns into idle even if submenu pages are built under the porfolio parent page... anyone? Thank you

  I'm not sure if I understand you right, but if you use a 'normal' menu, it should work exactly as you wish. Just look at this site: www.q-stables.de

• An event of a ring of Menu when the user selects the element itself

  As the subject says: I have a ring of menu.  I want to trigger an event if the user clicks on a menu item that has the same value as the vehicle currently has.

  I considered dynamically by registering on ' Ring: Mouse Down ", then pulling the value from that - but I can't understand how to tell if they clicked on the inside or outside of the menu box. Also, I can't assume the menu box, it appears is always the same size, because I'm creating programmatically values of the ring.

  Any thoughts?

  That shed light on the issue. Use a drop-down list box. Any selection in a list box drop-down is always a change in value, so you can use the value change event and capture the same selection twice. I tried and it works. Selected 'Test 1' over and over again, and it still triggers change in value.