Questions of the C300. Is no longer able to use the first with these files

Similar Questions

• I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it. Help?

  I've updated my macbookpro (2010) snow leopard at elcapitan but when I restart it does not complete the installation then is no longer able to use it.

  I tried the following:

  1 start with the R command and using disk utility that did say he had problems but then appear all ok after completing.

  2 tried the Verbose mode and did not work

  3. I tried command mode S did not.

  4. tried to zap the pram was not working.

  5 a couple other things that I had read, but nothing helped.

  It starts up and the line begins to show the computer made his 'thing', but gets stuck about 3/4 quarters of and goes no further. Would appreciate any suggestions.

  PS: also tried boot from the original disks as well, but no luck.

  You said "PS: also starting from the original disks tried both but no luck."

  Exactly what happened when you tried?

  Have you tried formatting the HD?

  Have you started the installation of SL?

• A few questions for the first blackberry development

  Hello

  First of all, my apologies for this being placed in the Java section, it seemed, the nearest section of what it is, but please move if need be.

  We have an application in development for the iOS platform that uses some geolocation and Web services.  We believe that we should have a version for the blackberry also platform, so we're looking in this evolution.  However, not being not to developers or users of blackberry, the different options for creating an application are quite overwhelming.  My questions are the following:

  (a) what language (Java?) is the most compatible?  Ideally, we would like to write the backend once, don't have to change the interface for devices of the curve through to the new playbook.  Java is also based on all of these devices?  None of us have any idea of Adobe Air, this is probably out of the question.

  (b) what are the operating systems are supported by what?  The curve I picked up seems to have Blackberry OS5 on it.  All operating systems support Java everything too, and whose support wifi location and cell tower map (the curve does not have a GPS unit).

  (c) I understand that during the development in Java there is a blackberry UI api, that's fine.  However, what version of Java is supported?  Is - this SE6, or we are talking about mobile Java here?

  (d) distribute the Apps.  The Blackberry App World seems to be the best route.  Do most people use?  It seems that the Blackberry is not restricted like iOS devices in how applications can be distributed.  Is there any other App stores (e.g. Amazon for Android?).  I guess it would be silly not not to enumerate the BB App World.

  Thanks in advance, any help is much appreciated.

  S.

  It is a really difficult game of questions.

  (a) Yes is the short answer.

  The long answer involves noting that the PlayBook does not directly support Java, and development platforms only available to this end are currently Adobe Air and Web works.  I can't give you a good explanation, since I dabbled only in them, but in summary,

  (a) with Web works you are essentially creating a Web application using HTML and JavaScript, with some JavaScript interfaces to the native operating system

  (b) air seems to me be in another development environment where screens and treatment are defined in a "Scripting" language that runs on the device.

  Work Web development is possible on the current BlackBerry phones as well, although I have no idea how compatible the two are - in other words how much you would have to change to a PlayBook Web app works works on the Palm and vice versa.

  I suggest you ask a similar question in the forums for these two platforms and see what they say.

  Anyway, there is a train of thought that phones current based Java will stop at some point, and phones will become based QNX, as PB.  So right now, if you want to learn something, then Web works.  But the works Web will be able to do what you want?  I don't know, but I don't know that Java is.

  But whatever the customer, you should be able to write the backend once.  Everything should speak http towards it.

  (b) there is not a BONE by device. Most devices come out with only one level and can be upgraded, usually at the next big release.

  Take a look at this good:

  http://us.BlackBerry.com/developers/choosingtargetos.jsp

  OS 5.0 in theory supports the location of the cell tower.  I say in theory because I never had to work in the United Kingdom.  But I have not tried very hard.  In my view, WiFi is available in the OS 6.0.

  (c) blackBerry support J2ME, with a significant number of extensions.  Think of it as Java 1.4 without all the useful bits, but the then RIM tried to add their useful in bits.

  (d) cannot speak for others, but BB App World is all I use.  Tried another one and didn't get anywhere.  YMMV.

  I hope this helps.

• What is the problem with my files, they don't move, copy or delete? #@?!!

  ..... It is not as easy as you think, either! I am not a novice, but I can't understand how to solve this problem! If I try to move the copy or rename them, Windows XP said 'Impossible. Access denied. Even the disk is not full or write protected and the file is not in use."  Well NO, the hard disk is NOT write protected and far from complete.  No other files in "My Documents", or if otherwise, give me problems. In addition, the files themselves are not protected in writing! They don't have ANY special attributes (IE. 'Read only' and 'Hidden' are NOT defined). Needless to say, I did not define all attributes on them myself, they are not in a shared folder, and I am the administrator of my own computer. When I restarted the computer the next day, it changes nothing! The problem with these particular files remained!

  I was able to move, rename, or delete only with UNLOCKER. But it's not my problem. My problem is when I try to burn any program I use, burns keep in check the end and I keep losing DVD - R, one after the other! I understood the reason for the failures of engraving is because of this problem of reading / writing weird with the files!  WINDOWS XP created this write protect it somehow, because he wasn't on the original files! However, this limited access status is invisible! There is no set special attributes on these files!

  They are just media files, I downloaded, as well as text files (FIVE files different, slightly different formats, ALL from different sources!). They have been downloaded to FIVE different subfolders created in 'My Documents'. And it's not just the affected media files. It's all the files that are in the same folders (ie. txt, jpg) (even if I can at least open the jpg, while I can't read multimedia files).  I've never had this problem with any other similar files downloaded in the same folder. These files are NOT protected by copyright, OR infected by viruses, AND I do not have the virus on my system. (I stopped Kaspersky, my virus program, but it made no difference. "So there was no lock file). Yet, I can play is no longer the files (so that I could before the etc..). VLC says "cannot open the file", WMP says similar. I created a new folder in My Documents, moved to the new folder with UNLOCKER, it made no difference! Same problem! Even using UNLOCKER to transfer them to the desktop, not in any folder in itself does not change a thing! Here is another beauty: software "UnlockIT" says "the file is not locked by any conducted! I have to be to imagine...

  ... This whole thing really made me realize how Microsoft Windows helps my carpal syndrome problem...

  Hey PieterVO,

  I've seen this in a few other threads before. Although I don't have a FixIt for you, I have a few discussions to look over.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/8e9eee80-C171-4D94-b91e-6797e1f96e49
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/d14731ec-4f0e-4ef8-9aac-028dd7104e0e
  I would like you to try to take possession of the individual files that you work with and try again. I didn't see the error codes listed above, so if you get the error codes, please report it to their.
  See Kieron June 9 Post and post Stickywulf November 14 in the second thread I listed above.
  Give those a try and let us know the results. I hope this helps. Thank you!

• Which files must be registered with the Organization of the first elements 13 files

  I'm organizing my recording I want to keep on an external hard drive and files by removing what is not necessary.  I want to assure you that I can open my projects later and make changes to them, but for now, I'm done with changes in these videos and you want to store on the external hard drive to save space. I understand that I can remove the preview Adobe Premiere elements files. What the record coded files and folder Layouts. I noticed that the encoded files folder has only some of the projects, so I don't know how I created inadvertently them and what is their purpose. Ditto for the Layouts folder and files of the score. Thank you

  Preview the first elements 13 files

  There are two ways to do it.

  My way is not documented.  It is to have EVERYTHING for each project in a project folder named and dedicated.  That includes copies of all the assets of video, image and audio and all the disks scratch (Edit > preferences > Scratch disks).   I can then copy the WHOLE folder anywhere for storage.  Then I can copy the disk to work for future changes.  Note that this may not work if you upgrade to the next version.  You must keep your different version to match your projects.

  Another way is to use the project archiver... tool on the file menu.  I tried it a few times and it works.  I use it because I have more can control on the folder structure when I average.  I remember correctly, there are two choices in the project archive.  One saves a vast set of folders for future work.  The other deletes files to save space, but leaves less future editing options.  Note that some versions there was a suggestion on this forum that it could be a bug somewhere in the archiver.  Before you delete your main project file, you can test personally being able to open an archived project.

  Please refer to the manual ( https://helpx.adobe.com/pdf/premiere-elements_reference.pdf ) explanation of the process of archiving.

• The content of these files can be deleted?

  The content of these files can be deleted?

  In the Finder, and then to the library I have two files, one is called caches and cookies to others.  What is inside them can be deleted?

  I have an iMac running macOS Sierra 10.12.

  Thank you

  Select this option.

  There are actually several 'library' files in the Finder and it is better that you don't mess with them.  Most browsers have ways to delete the cookies in the browser itself and adjusting the size of browser cache.  Caches speed up the operation of the computer, and unless you have a specific problem, you have not and should not, remove them.  At best he probably will do nothing, and at worst you may have to reinstall your operating system.

• Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities of free ware

  Windows Media player on my machine does not run some AVI files. How can I check what the problem with AVI files. Files are running in other utilities free ware. Also, windows Explorer does not display dimension and other video related information for the file. Y at - it a tool that can indicate what exactly is the problem with the file.

  Ritu

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  http://support.Microsoft.com/kb/279242

• I try to install the updates, but continue to flock to the top with these three who fail; Code 64 c, 66A and 645.

  I try to install the updates, but continue to flock to the top with these three who fail; Code 64 c, 66A and 645. any help?

  Hi George8371,

  Please take a look at the KB codes error '0x8007066A' or '66' occur when you install updates of .NET Framework with some additional troubleshooting.

  I hope this helps!

• Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type

  Title: download original ROM files on Vista

  Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type. Patches?

  You must get the update of the firmware that can handle the type of file the same place ROMA, you got the firmware file.  From what I see, they seem specific to the product updated. http://www.FileInfo.com/extension/ROM if they don't have it, talk to their technical support staff and ask them what type of program is required to install the firmware provided in ROM format and where you can get it.  Vista doesn't have the ability to read a file ROM type  Some software must be added to give this capability.

  Here is an article I read: "various hardware upgrades and emulators use the ROM file extension." A user needs a flash program usually available on the website of the manufacturer of the motherboard. The user must not flashing BIOS unless the user knows that he has the image of his mother. An error or the computer may be turned off when the wrong BIOS image is flashed. "So be very careful here, or you can completely disable your system.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I need to export videos using adobe premiere with these video resolution: DV 25 420, MXF. I have tried many of the export preset, but the MXFop1a give a video exorted with codec 411 instead of 420

  I need to export videos using adobe premiere with these video resolution: DV 25 420, MXF. I have tried many of the export preset, but the MXFop1a give a video exorted with codec 411 instead of 420

  It doesn't seem to be any adjustment for this user.

• When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader.  This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall a

  That's happened?   When trying to download Windows Explorer, a bunch of my files (including web browsers) has been treated by my Acrobat Reader. No idea how or why this has happened. This has also changed the icon for these files (including browsers).  Could not change their return.  Tried to uninstall and reinstall Acrobat Reader a few times.  With Acrobat Reader installed now I can't open my browsers or other files that has changed.  With Acrobat Reader uninstalled icons are appropriate and I can open the browsers, but other files may not always be open.  What happened, and what I can do to use Acrobat Reader again and also use my browsers and open the other files?

  You have tried to download Windows Explorer?

  In any case, this might solve your problem: Application, file icons change in Acrobat/Reader icon

• I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always

  I have redownloaded my CS5 Photoshop and Camera Raw will not accept my RAW files or Adobe Bridge displays the display of the image of these files. A message appears saying: it does not support this camera.  I have a Nikon 5100 digital SLR.  He has always displayed them in the past.  How do I get to view these photos in Bridge, then open them in RAW?

  Your Nikon 5100 requires a minimum of 6.4 ACR.

  The ACR, which is installed with CS5 default is 6.0.

  You must update your ACR to the latest version available for CS5 - ACR 6.7

• Satellite A350 is no longer able to use the WLan

  Hello guys,.

  so... I started using Bluetooth earlier, use of the Internet via a cable... Today I tried to use my WLan again, but it did not work (worked well before).
  So I tried to activate it via FN + F8, but all I can see is activate Bluetooth, one for the WLan disappeared?
  The WiFi light only blinks when Bluetooth is activated. I would rather turn off Bluetooth that not being able to use the WLan.

  I think it's a similar problem
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67514&TSTART=0
  but I really didn't want to install a bad driver or anything like that.

  I use a 32-bit Vista and my PC-Tool says that I use these networks currently (I just copy and pasted because honestly, I have no idea, hahaha).
  Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0) Version = 6.208.729.2008 MAC address = 00:23:5 A: 05:61:05
  Intel(r) WiFi Link 5100 AGN Version = 12.2.0.11 MAC address = 00:21:5 D: 62:D8:1 C

  I would be so happy if someone could help me fix the problem anytime soon, because I really need wireless capability soon. Thanks :)

  Former Satellite A350 was delivered origin with Vista OS, so at first I would like to know if you use original recovery image (OS) that you got with your laptop.
  If I understand you good WLAN card is installed and registered properly in Device Manager. Can you confirm this?

  I have Satellite A300 and a friend of my A350 but WLAn works properly on both machines so I m a bit confused why the WLAN option is missing when you use the FN + F8 key combination.
  I m wondering why WLAN is detected by the system but ignored by the utility of flash cards.

  I'm don't know if this will help, but try to follow:
  Enter the BIOS and set it to default settings
  Reseat the wireless network card.
  Reinstall the extra value package, and check again.

  If the problem persists after doing all this, you have to do a final check and reinstall the OS using original recovery image that you got with your laptop. It's a way more radical, but certainly more efficient to solve a software problem.

• Is no longer able to use the photos as a screen saver

  original title: my screensaver use to work with pictures, I do everything he tells me to do and it does not work someone help me

  I have windows and I followed the instructions several times to my screen saver photos

  Hello

  ·         You receive an error message?

  ·         Is it happens on other existing user accounts? (if applicable)

  I suggest you to read the following articles for more information on the use of photos as your screen savers.

  Use pictures as a screen saver

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-pictures-as-a-screen-saver

   

  Use pictures as a screen saver

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-pictures-as-your-screen-saver

   

  I hope this helps.

• Questions about the function "movie Diff file with...". »

  Hello

  I started working on a project where I'm now a piece of the old code written by an employee has since left my company.  This is a file of sequence TestStand 3.0 calling on Labview 7.0 code. The thing is, there were two of these facilities at different times and, somewhere in the Woods between stations 1 & 2, the code base diverged.  Part of it was due to not being able to get the material in double right for the PXI chassis and part was, apparently, due to the fact that the customer has used the 2 machines to test different models of the object to measure.

  So, I'm looking for copies of the code installed on both machines using the diff feature in TestStand base.  (If that makes a difference, I do this view in TestStand 3.5 since TS3.0 disappeared mysteriously some corrupt on me right now on my main development machine, and if the memories are good, you need to uninstall all the latest version of TS to reinstall an earlier version.)  A quite fun process, no doubt, but a little of your time.)

  Anyway, the first thing I noticed is that many sequence steps have different values of ID of the step Properties.Step look like this: "ID #: 2vMTp0db002mQDXArddRSA.  Play with the diff screen showed an option "Ignore the unique ID of the Step" which got rid of these.  With regard to these single-step ID: when they are generated and they remain constant on a particular machine?  Beyond simple curiosity, I wonder as an another diff is in some of the "on spending target ' or 'On Custom Condition true target' under certain properties of the step and the value down there looks suspiciously like these unique ID (that is, '" ID #randomstuff' ").  Are they all updated dynamically during execution or break something by changing these (for example if I copy a sequence of a crushing in the other version)?

  So, I have filtered the unique ID's.  The next major area of difference is that many, but not all together, VI Labview calls have a difference in the properties of the step > Flexible Labview adapter properties > ViCall > connector pane Checksum > value.  In addition, in some other cases, ViCall > error > connector number is different as well.  This indicates a different underlying VI?

  There are a few other differences, but I can interpret those.  My goal is to get a file of sequence for two machines, so the code will be easier to maintain.  I think that some of the VI with different amounts of connector pane control can be different between two facilities from one of the different hardware components required a library different driver.  This leads to a third question, what to use identical sequence files when the underlying VI may be different?  Is it just the interface must be the same?  As the connector pane has the same types of data and geometry for the presentations of the inputs and outputs?

  Thanks for any help,

  Mike

  I just got the phone with the help of NOR, so no worries on the answers.

  Short version:

  The unique ID is regenerated when a sequence is copied.

  TestStand didn't need to uninstall to reinstall an earlier version of the above.

  Connector pane Checksum involves a different underlying VI, but having the same geometry/inputs/outputs/types of connectors should allow you to have an another VI of facilities without different sequence files.

  Still awaiting support on the question of if the goto pointers updated correctly when a sequence or part of a sequence is copied.