Questions to access the Safari...

Similar Questions

• Malware doesn't let me access the Safari preferences.  Help!

  This window pops up suddenly while I was with Safari:

  Of "'http://macintosh-help.com ': "

  Are you sure you want to leave this page?

  At risk security system *.

  Critical security warning! Your Mac has detected an attack on this system, as your IP address seems to be accessible from two different places at the same time. A suspicious connection was attempting to access your Logins, Banking details & tracking of your Internet business.

  Please contact Support Mac team immediately at 1-888-398-6257 (TOLL FREE) and provide the UR97L1DA2TA error code to analyze and solve the

  Trying to close the window just opens a new window with the same or similar message.  I suspect that it is malware taking advantage of a flaw in JAVA.  All resolutions, I watched that require to open Safari preferences but this malware won't let me access the Security tab in the Preferences window.   Help!

  Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key is pressed. If the message reappears, disconnect the computer from the Internet and close the tab Popup came.

  (138731)

• WRT610N question to access the data on the NAS

  Hello

  Just replaced my WRT54G (works perfectly) with a WRT610N and used the same configuration to access Internet and LAN.

  Upgrade to the latest Firmware for the 610N.

  The WRT610N that is connected to a SD2008 (1 GB of Linksys 8 - port Switch).

  SD2008 connected to a Synology DS209 + with the latest Firmware and PC XP. Access between PC and DS209 + works perfectly.

  WRT610N connected to a couple of wireless devices; such as iPhone, Vista and XP PC and wired for PS3.

  When you access any device (PC, PS3) through WRT610N, I see all the directories and content even as thumbs on DS209 +. Try to open or to copy one takes file (2 MB in size) incredibly long (about 3 minutes). .

  Copies of Vista or XP PC wireless to DS209 + large works and same file is copied in a few seconds. Internet download works fine with good performance as well.
  WRT610N with NAT enabled; Firewall disabled.

  Any suggestions or solutions?
  Thank you

  This is it.

  Bought new cables - same question, MTU has changed - same question. Changing the port on WRT - BINGO.

  Looks like Port 1 is defective,

  Thanks for your help amine.

  Concerning

• Newbie question: to access the items in a locked file "kind of."

  Newbie question: a friend (who is not accessible now) has sent a file I. Vector graphics are enclosed in a blue box. I can move the whole box within the artboard and you can add other items, but I can't change the existing components. Unlock, dissociate are gray. How can I get 'in' components?

  Look in the layer panel and see if the layers are locked. You can also check in tracks mode and see if there is really something out there, or if it has been saved as an image.

• Questions to access the router Netgear WNDR3400 of laptop Readyshare USB disk 64-bit Windows 7

  I have a laptop of 64-bit windows 7, which is connected to the router of netgear wndr3400.

  I have a USB key connected to wndr3400.

  This drive is supposed to be accessible through the path of the \\readyshare\USB_Storage, but I can not connect by typing the path and I'm not under network. I tried to wire the laptop to the router, but the path of the \\readyshare is still not accessible.

  There is no firewall on the laptop.

  I see other computers on a network in the same network the laptop.

  I also have a desktop that is connected (wired) to the router, and the Office can see the \\readyshare subnet. The office is equipped with Windows vista 32 bit.

  I would appreciate your help in how to solve this problem.

  Hello

  Try to redo all the sharing system around a working network configuration.

  --------------------------

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  ------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• To access the elements of the scene, via a SWF file that is loaded inside the scene

  -J' I A.fla.

  -A.fla includes buttons, video clips and also B.swf is loaded in A.fla with a CHARGER

  -I want to access the elements in A.fla, from codes actionscript inside B.fla to change these video clips and buttons based on the actions going on in B.swf

  for example, lets say there is an X button in A.fla and there is a button there B.fla, B.swf is loaded into A.fla, and I want the key Y to delete X when you click the button.

  General question: to access the elements in a stage, via a file SWF loaded in this stage.

  This is a way silly to explain: there is this pregnant mom, a child is loaded inside him, now, I want the codes inside the child, access to MOM

  elements, such as lets say, I want the code of the child can make the eyes of MOM flashing faster. logically there is something inside something else, but I want to have access to the bigger picture of what is loaded. I hope I can get my point across.

  I repeat what I replied to your other psoting for this same question and adding just a little bit more...

  If you load a swf into another using the Loader class, then the charger itself is the parent of the loaded swf file, so MovieClip (parent.parent) could help you target the timeline that the charger was born.

  The way to have a loaded file to speak to a parent file is through the sending of events that the parent assigns headphones for after the file has been loaded.  Here is a link to an announcement that could help explain how to implement this.

  http://forums.Adobe.com/thread/470135?tstart=120

  And here's a quick example...

  Example:

  Add something to raise the event in the child:

  dispatchEvent (new Event ("eventTriggered"));

  In your SWF to loading/parent, listen for the complete event on the Loader.contentLoaderInfo.  In the complete event handler, add a listener for the event on the loaded swf file.

  triggered when external swf loading event handler
  function loaderCompleteHandler(event:Event) {}
  (event.currentTarget.content as MovieClip) .addEventListener ("eventTriggered", eventHandler);
  }

  function eventHandler(event:Event):void {}
  trace ("event sent in loaded swf");
  }

  So in your A.swf, you should have the other event and functions of event handler that would take care of control buttons.   Event listeners could be assigned to the B.swf after that that it has loaded.  In your B.swf you just have it dispatches an event and the A.swf manage self adjustments you need taken care of.  This allows the two files to be independent of each other on a functional level.

  Regarding the buttons that you want to disable, you can either use the removeEventListener() method to remove the listeners you have assigned, or you can set the mouseEnabled property to false, or you can set the visible property to false.

• Safari Version 9.1 (11601.5.17.1) is no longer allow me to access the preferences of Safari

  Safari Version 9.1 (11601.5.17.1) allow no more me to access Safari preferences from the Safari application. I use the latest version of El Capitan on a MacBook Air. Less than half of the 259GB SSD is used. Any ideas?

  I tried everything but a complete reinstallation of the operating system. Once again, any ideas?

  Thank you

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• I am trying to access the security settings in my Apple ID, but due to too many attempts to answer my questions of security, this option is blocked. How can I unlock it?

  I am trying to access the security settings in my Apple ID, but due to too many failed attempts to answer my questions of security, this option is blocked. How can I unlock it?

  You can see this page if your identifier Apple is locked to see how to solve this problem.

  https://support.Apple.com/en-us/HT204106

  If you cannot solve this way, please contact support at the link below!

  https://getsupport.Apple.com/

• Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  Safari on my MacBook Pro retina 9.0.3 15-inch Version 10.11.3 do not show images on some Internet sites. They appear for a fraction of a second then disappear with a question mark in the Center. The same sites work fine on Chrome and Firefox.

  I suggest you only begin by taking the measures recommended in this support article.

• Since the installation of the last update of iOS on my iPad I'm unable to type in the address bar of safari. I can access the Web sites of my favorites, but when I try to enter a new address safari closes its doors.

  Since the installation of the latest update on my iPad, I'm unable to type a new address in the address bar of Safari. I can access the Web sites of my favorites, but when I press the address bar Safari closes its doors.

  I reset holding home and power button at the same time. I did that 4 times. I also left all the settings.

  I am also unable to access the server from imessage. I don't know if these two things are related, but the two that happened after the update to iOS 9.2.1

  Since this announcement, I found a Reddit thread that suggests a temporary solution by disabling Safari suggestions. It worked for me.

• How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  How to access the software so that I just paid. I assigned to a user. The user connects and subscription is not found. The site seems to crash randomly and just sends me in circles. How can I get a refund is my next question.

  [Profanity removed... MOD]

  Hello

  I just checked the details of your team, and the license that you have assigned intervenes as well on the same Adobe ID.

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service

  In order to become a distributor of volume Adobe Reader, (my computers have no internet access), I need to fill out the Distribution of Volume License Agreement, but will not accept an answer I gave to the question: "Please indicate the product or service name and description.

  This form must be completed and submitted online. Also the browser Javascript must be activated.

  https://distribute.Adobe.com/mmForm/index.cfm?name=distribution_form&PV=RDR

• I have been using LR for at least 4 years now and have continually updated. Current version LR6. I now want to join CC and thus access the PS and all the great stuff. Question: Can I get a refund or the recognition of the fact that I bought LR? Yo

  I have been using LR for at least 4 years now and have continually updated. Current version LR6. I now want to join CC and thus access the PS and all the great stuff. Question: Can I get a refund or the recognition of the fact that I bought LR? Your answer please. PS - no doubt a question you get more often. !@

  Hi Philippe,.

  Please see: pricing and membership creative cloud plans | Adobe Creative Cloud

  Otherwise, you can join Adobe sales for rate applications.

  Kind regards

  Sheena

• Basic question XML Publisher: how to access the tags in the higher levels?

  Hi all
  We have a fundamental question in the XML editor.
  
  We have an xml hierarchy as below:
  
  < CD_CATALOG >
  <>CATALOG
  CATALOG < CAT_NAME > 1 < / CAT_NAME >
  < CD >
  Heading1 < TITLE > < /title >
  ARTIST1 < ARTIST > < / ARTIST >
  < CD >
  < CD >
  Title2 < TITLE > < /title >
  ARTIST2 < ARTIST > < / ARTIST >
  < CD >
  < / CATALOGUE >
  <>CATALOG
  CATALOG < CAT_NAME > 2 < / CAT_NAME >
  < CD >
  Title 3 < TITLE > < /title >
  ARTIST3 < ARTIST > < / ARTIST >
  < CD >
  < CD >
  TITLE4 < TITLE > < /title >
  ARTIST4 < ARTIST > < / ARTIST >
  < CD >
  < / CATALOGUE >
  < / CD_CATALOG >
  
  We need to create a report as below:
  Catalog_name CD_TITLE CD_ARTIST CATALOG 1 HEADING1 ARTIST1
  CATALOG 1 TITLE2 ARTIST2
  CATALOGUE 2 TITLE 3 ARTIST3
  CATALOGUE TITLE4 2 ARTIST4
  
  So we have a loop at the < CD > Help for each CD. But when we are inside this loop, we cannot access the CAT_NAME value which is at a higher level.
  How can we solve this?
  
  Now, we use the workaround of set_variable and get_Variable. We are defining the value of CAT_NAME inside an outer loop and use it inside the loop internal using get_variable.
  Is the right way to do it, or are there better ways to do this? We run into problems when data within tables.

  You can use

  copy to your model

• two questions. question 1: join the clouds will give me access to QuarkXpress.

  two questions. question 1: join the clouds will give me access to QuarkXpress.

  QuarkXpress is not an Adobe product. The QuarkXpress product page is here http://www.quark.com/Products/QuarkXPress/.

  To see which products are included with Adobe Creative Software cloud go to this page https://creative.adobe.com/apps. There are learn more links for each of the products and services included.