Three questions about the version of the hardware and VM tools

Similar Questions

• Questions about the terms and conditions

  Dear team of Adobe Stock,

  I am considering a subscription for an e-commerce site that I am developing. I have a few questions about the terms and conditions:

  3.5 social media use. You can view or download an unmodified version of the book on the Social media Site if (A) you include a notice of copyright in the work itself (© author name - stock.adobe.com) and (B) the terms of use governing the Social media Site do not include any provision that would grant exclusive rights or the ownership of those works or alterations to anyone. "Social Media Site" means a website or application that puts the main emphasis on facilitating social interaction between its users and allowing users to share content in such social interaction

  What I have to insert in each post on social media on behalf of the author? Generally, this information is displayed only for free images. What I have to insert this information even if I signed up for a plan?

  Thank you

  Hello

  Please see the link below for help:

  http://wwwimages.Adobe.com/content/dam/ACOM/en/legal/servicetou/Adobe-stock-additional-ter ms_20160119.pdf

• Question about the interruptions and priming

  Hello

  I had a few questions about the startup and interruptions in a virtualized environment

  Assuming that, plenty of virtualization (no material assistance to virtualization of memory ).

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the initialization of the different process, as I understand it takes BIOS-> Expansion ROM - > BIOS-MBR-> other record secondary-> VMM-> OS--> applications >. Am I right on that?

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Thanks in advance

  -SC

  sidc7 wrote:

  1 initialization: in an ordinary PC, the boot process starts with the BIOS, to expansion ROM, back to the BIOS and MBR secondary boot record, then grub (is it) and finally the operating system. In a virtualized environment with VMM running directly on top of hardware (Native VMM), how is the different boot process, if I understand correctly to -> BIOS-> Expansion ROM BIOS-> MBR-> other documents-->--> OS--> requests VMM. Am I right on that?

  It is simplistic but essentially correct.  A metaphor would be a little better thinking that the hypervisor/vmm is an operating system, except that the process on this operating system are requests or comments OSes.  If the BIOS-> OPROM-> BIOS-> MBR-> hypervisor-> init process of the hypervisor-> reviews of fork () s operating systems.  This can become blurred by the design choices (for example Xen/Hyper-V init start a coded parent hard partition that makes hypercalls privileged to fork() guest OSes; ESXi init runs a very limited subset of applications directly on the hypervisor and ESX Classic is somewhere between these approaches).

  There is a subtle distinction between "hypervisor" and "www."  The "hypervisor" is the operating system of single root (e.g. ESX) who interacts directly with the hardware and has access to everything; a hypervisor is not to be used to run virtual machines.  When we talk about a "hypervisor", the tendency is to describe something which is a BONE (although usually a minimal OS designed only to run virtual machines).  The "www" is the layer that allows a virtual machine run: it provides the interposition, virtualization and emulation services and can be plural (for example a vmm by guest operating system).  Architecture of VMware deal with these two separate components, while most other virtualization platforms merge the two.

  sidc7 wrote:

  2 breaks: VMM examines the source interruptions prior to the interruption, so in a multicore environment, assuming a 2 processor core, how the VMM decides on the kernel for which the interruption in intended, prior to shipment of the interruption. Interruptions are tag ID, said core ID?

  Strictly speaking, the interruption is not transmitted to a guest operating system - receives the hypervisor (or rather the VMM it transmits to the hypervisor), the hypervisor drivers interpret the interruption (for example reading package of NIC, I/O process of HBA, the timer tick completion), then after a new appropriate break in the guest OS.

• A question about the methods and parameters.

  Hey guys, this is my first post here. I am very new to Java and done a bit of C++ before Java. I had a question about the methods and parameters. I do not understand the methods; I know they can be repeated when it is called, but it's almost everything. I also know that a program should have a class that contains the main method. What I really, really understand on methods is what the parameters are. I know they are in parentheses and that is it. Could you explain what they are? I really appreciate it. Thanks to all in advance. Best regards, Michael

  Taking an example:
  Suppose you calculate area of the rectangle you need two inputs one is the length and the width. Area = l X b, where l = length, b = width

  If your method, say, calculateAreaOfRectangle (length int, int width) will be two parameters as arguments.

  System.out.println ("field of rectangle:" + calculateAreaOfRectangle (40,30);)

  public int calculateAreaOfRectangle (int length, int width) {}
  int area;
  Area = length * width;
  return of area;
  }

  So if you call this method then the output will be returned in 120.

  Parameters of a method are simply the input variables for the method of treatment for all calculations or something useful.

  And we cannot have methods inside the main method in Java. It is in the java syntax and if you do, it will throw a syntax error.

• Three questions about the upgrade of CS6 CC

  Hi, I just have three short questions thinking about an upgrade:

  1. He is there discount any more as a user CS6 when it goes into the CC, right?
  2. Project Comet will be part of the CC when released, right?
  3. When it goes into the CC, is it better to remove the CS6?

  Thank you very much!

  Hi Benjamin,

  Please find the answers below: -.

  1. He is there discount any more as a user CS6 when it goes into the CC, right?

  The discount is gone for the improvement of the Creative as a result of the creative cloud.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  2 Project Comet will be part of the CC released, right?

  Please visit:Presentation project Comet: a new tool for the design and prototyping user experiences fast | Creative blog Cloud by Adobe

  App design, prototyping and user experience | Adobe project Comet

  3. when the upgrade to CC, is better to remove the CS6?

  The amount of the fine to have both versions installed on your computer. CS6 version can coexist with a CC version without causing any problems.

  I hope that answers your query!

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• General questions about the hardware of a computer running windows 7

  Hello

  I downloaded the third-party software to measure alive my processor and heat from the hard drive.

  now my question is

  Wat is the maximum heat for a processor is normaal in action 50 or higher?

  THA same I ask for the hard drive.

  Thank you

  Johan

  Hello

  I downloaded the third-party software to measure alive my processor and heat from the hard drive.

  now my question is

  Wat is the maximum heat for a processor is normaal in action 50 or higher?

  THA same I ask for the hard drive.

  Thank you

  Johan

  Hi Johan

  It depends on the manufacturer, the type and the version of the processor, as well as the way in which the CPU is used.

  Operating temperature of the processor FAQ:

  http://www.Intel.com/support/processors/sb/CS-033342.htm

  Concerning

• Three questions about the directory $ORACLE_BASE/admin

  Versions: 10 gr 2, 11g
  
  
  Question 1.
  According to FAO, the admin directory must be placed in

  $ORACLE_BASE/admin

  Right?
  
  Question 2.
  admin directory should contain adump and bdump, cdump, udump directories in the following format.

  $ORACLE_BASE/admin/$ORACLE_SID/bdump

  Right?
  
  Question 3.
  In addition to adump, bdump, cdump and udump, are there other directories located in the admin folder according to best practices?

  SM_308

  11g has completely reorganized the bdump and udump stuff, you might want to look in the documentation.

  For 10 g 2, that's all right.

  Oracle usually creates the following additional directories

  adump: checks
  pFile: init.ora
  create: creation of database scripts
  dpdump: location of exports datapump

  I usually do the following UNIX

  I have $ORACLE_BASE/admin/bin for generic shell scripts (database independent)
  I have $ORACLE_BASE/admin / $ORACLE_SID/bin for specific database scripts

  My $PATH is adjusted accordingly (in oraenv)

  I have $ORACLE_BASE/admin/sql for generic sql (database independent) scripts
  I have $ORACLE_BASE/admin / $ORACLE_SID/sql for sql database scripts

  My $SQLPATH is adjusted accordingly (in oraenv)

  HTH

  --------------
  Sybrand Bakker
  Senior Oracle DBA

• Three questions about the selection of beginners

  Hello

  1. If I use a selection, like the magnetic lasso tool, I know that I can zoom in and out the picture while I select. But do I also move the photo by entering it? I can't activate the acquisition card hand tool, while I am using the magnetic lasso tool. Sometimes, I need to move the picture while I'm choosing to get a better view. Is my only option to zoom out, or is there a way to recover the autour photo while I select?

  2. If I finished to make a selection with the magnetic lasso tool, but I need to refine or to touch just a small part of it, how? I tried the ADD + and SUBTRACT - options within the magnetic lasso tool, but there was a problem I couldn't get to. I wish I could shoot the moving dotted line around an area to increase my area of selection.

  3. when I use a tool (like magnetic lasso), can I "Watch" this tool and "pick up" another tool like the non-magnetic lasso, pursuing the same selection?

  Thank you!

  (1) space bar

  (2) option to subtract. Moving to add.

  (3) is not AFAIK. L and l shift do not seem to change the tool while working on a selection.

• questions about the updates and drivers

  I have 2 questions.

  1. How can I reinstall an update failed to install the first time?
  2. If I can get the driver I need mass storage?

  Hello Sherry,

  Question #1: Go into Control Panel, click Windows Update, and then run the Check for Windows Update manually. Download and install the missing update. If you know that you have missed one, but his shoeing not try refreshing the page until the missing update reappears and you can install it then.

  Question #2: The short answer is to go the manufacturer of the mass storage device and look for driver that corresponds to your operating system. For this, you will need the brand and the specific model of your computer, the version and the depth of your Windows 7 system and brand and the specific model of your mass storage device number.

  These instructions are generic as your questions were also. I don't want to insult your intelligence by giving you more that you need, please post here with any details you need.

  Kind regards

  BearPup

• Questions about the cost and the best specifications for a new Windows 7 computer

  Hello

  I got most of the things that I should include in the purchase of a new computer.

  Things proposed are the following: Please read and tell me if I need it, and the approximate cost.

  8 GB

  12 GB

  A TB

  VIDEO CARD BUSINESS... I'm QUITE CONFUSED as to IF I NEED. SEE MY QUESTION AT THE END.

  Video card: min. 99 (No. built in chip card (or is it... discreate) dunno... two options different which one.)

  Video card: should be mid to high range; at least at first.  They are beginning to take a long power supply

  supply; and can charge the supply too, so invest in a good to start with.

  Question: Can I add a video card later?  Right now I only use the documents and regular pictures.  Later I want to do

  videos of my pictures; not much more.

  LCD or LED display must be top natch; for Photo Editing/cropping or manipulation?  I do not understand what they

  Let's talk about it.     They speak the monitor?   I DO A LOT OF PHOTO EDITING

  PHOTOSHOP.

  Thank you, Zara3511

  A discreet (dedicated) video card is not necessary. You can always add more later if you need the extra graphics power. Its not harmful if you perform a task such as photos and videos. Benefits is its great for games top of range and can future proof your system. If you are working in Photoshop, certainly invest in the discrete video card. Photoshop she likes it.

• Question about the vista and firewire

  Hello all, I am an editor with a camcorder Panasonic GS-120. I used to have a desktop computer running Windows 7 that I used to import my videos with. The way I used to do is simply plug my camera into the firewire port and wait for the capture/import to Windows Movie Maker window to appear. Now, I can use is more than desktop because the fried CPU. So I have to use my laptop which runs Windows Vista. My laptop also has a firewire port, but a 4 port pins and I had to buy a new cable. My cable came today, I plugged it all as I would with my office, and nothing came. I tried to go into Windows Movie Maker, then click Import, but it said that my camcorder is not recognizable or something along this line. So now I have no way to import my videos. I'm pretty sure that of not the cable because it's new I went into Device Manager and uninstalled then reinstalled the driver for the firewire port, so this isn't a problem with the port, and I'm sure that's not the problem with the port on the camcorder. So my question is, what happens? Why can't I import my videos as with Windows 7? Is it possible for me to import videos? In addition, I don't have a VCR or an S-video cable, so that the method is out of the question. Thank you all very much.

  Perhaps the following would offer a few ideas:

  Windows Vista - import video from a videotape
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-from-a-videotape

  Windows Vista - Troubleshoot importing video problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

  If the AutoPlay screen does not appear... What follows
  Articles may help:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  And... maybe the following will propose a few ideas:

  Import video in Windows Vista
  http://maximumpcguides.com/Windows-Vista/import-video-in-Windows-Vista/

  Download video from your camera to your computer
  http://Windows.Microsoft.com/en-us/Windows-XP/help/MovieMaker/download-video-from-camera-to-computer

• Question about the bleeding and facing pages.

  Hello

  I'm in trouble with my first InDesign document which is a 96-page Magazine. It will be printed on sheets A3 stapled in the middle. My impression of the guy said it's ok in the form of A4 pages with 3 mm overhang.

  So now when I try to export in pdf print (I check the brand I want to use the documents of bleeding parameters) exports with the sections on the left and right pages (left page exported with? I guess than 3 mm? bleed from the right page and so on). If I replace the parameters bleeding and I set to 0mm it is all ok, but I fear that certain images or text could get cut because I have everything with the substantive benchmarks lost in indesign.

  And I can't uncheck pages face to face since I have some graphs (graphs and so on) that spread from one page to another (on the same spread).

  My question is... I can do and always use the bleeding or (ignore "inside the bleeding' or something) or is it OK to use the export as a spreadsheet instead of individual pages because he wanted pages A4?

  Any help for a beginner would be appreciated. Thank you.

  "' You can set inside bleed to 0 in the configuration dialog of document or in the export options when you make the PDF, or if you absolutely need to have inside purge for creep (want, but check with the printer), see InDesignSecrets" Blog Archive "Pages Breaking Apart to bleed off a spine

• Question about the listener and the process server in dedicated server mode

  Hello
  
  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.
  
  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.
  
  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?
  
  Clarification on how this case is handled are very much appreciated, thank you,
  
  John.

  440BX - 11 GR 2 wrote:
  Hello

  The Oracle documentation says that, when a client connection request is received on the server, the receiver creates a process server who will work with the database instance to perform the tasks requested by the user/client process. So far, everything was good.

  Now, when the user is on the Oracle himself server, the listener didn't need to run to establish a connection to the database. Therefore, it is possible to stop the Listener and not always connect using sqlplus and a valid username and password.

  In the case above, the question is: if the listener does not work, what/who created the process server that communicates with the instance of the database on behalf of the user? In other words, in the normal case, the listener could get the request and create the server process. When the listener does not work what part of the Oracle Gets the requests and creates the server process?

  John,

  I guess that you have asked the same thing in a different form in another thread. In the case, when the process of the user and the server is to be on the same side, the communication done by using the Protocol bequeth and the user, since it is not not going to use a (@) sign, he would use a default service for connected sys$ users .

  HTH
  Aman...

• Question about the rowchain and performance impact

  Hi all

  We have a table is partitioned and we insert data with values in column PK only leaving all other null column values. After one or two days we will update the column values.

  We are to suspect that our table suffers from rowchain. We did no analysis to see the rowchain as he is busy 24/7 system.  system stats "table continues line" could not useful as we do scan on partitions full and never no index lookup.

  Assuming that we suffer from rowchain what is the best practice to follow?

  (1) should we insert the dummy data in the first place? We wanted to insert some dummy values that is going to be same length of length of data for future update. What is this popular help with problem the chain line?

  Made Oracle deletes data on the block and reuses the same space for the new updated value? (Assuming that the new value of data will be exact same length)

  (2) if the method above doesn't work, then the only solution it to have high PCTFREE?

  -Thank you

  That should help, if your update does not increase the size of the line is not necessary for oracle to migrate.

  You another issue of additional work would not set. What is a two step process?