Questions, try to copy the RGBA channels or grayscale in another RGBA file

Similar Questions

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud

• Micro adapter USB keeps disconnecting when I try to copy the files.

  1 messages
   
   
  Micro adapter USB keeps disconnecting when I try to copy the files.

  Hello

  I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

  Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

  Any help will be appreciated, thanks in advance!

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  Method 1:

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 2:

  I suggest you to remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

• Copy the result of a join to another table

  Hi all

  I want to copy the join of two tables in another table. I tried the following approach, but I have error

         insert into new_copy  values (ID,name,na_name)   
         SELECT
           name
          FROM
            country u
          INNER JOIN
            (
              SELECT
               na_name
              FROM
                country2 st
            )
            s
          ON
            u.id = s.ID;
  

  1. insert into new_copy (ID, name, na_name)
  2. SELECT i.id, u.name, s.na_name
  3. COUNTRY u
  4. INNER JOIN s countries2 ON u.id = s.id

  must be done

• Is there a way to copy the attributes of one composition to another?

  I use After Effects 7.0

  I would copy the same attributes of Zoom of a composition of 30 photographs.

  In Final Cut, you can copy the attributes of one element to another. Or from one photo to another.

  Is it possible to do in AE 7?

  Thanx

  Mike

  There are dozens of ways you can go here. You can duplicate the comp, then replace the images in the layout. You can create predefined animations. You can select all the animated properties and copy and paste in another layer. It depends on your workflow.

  I suggest that you look into the preset animations. I have over 200 of those custom in my system. They save a ton of time.

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.

• Try to copy the corrupted user profile profile settings and I am met with the error message "too long file name!

  I tried to connect to my laptop today and instead of recording in the usual way a message that windows creates new office settings. When he finally connects me I get a message of bubble speech saying I was connected to a temporary profile, I reboot several times and the problem persists. After a little google research, I realize my old profile is probably corrupted... I have not downloaded a new software/hardware.

  I followed the steps of miscrosoft to copy the files from my old profile to a new user, everything in the file transfer went well until the last few files to copy. Then, I get this error message saying "the file names would be too long for the destination folder", only two options are cancel and skip available. Which are useful.

  I do not recognize these folders that are too long (the names are the random letters and numbers), I tried to look for them, nothing is done. And to be honest, I don't understand what that means.

  UPDATE: I decided to copy folder a bit at a time and it solved my problem, that all the files were copied successfully. However, now I was struck with a new problem. Whenever I try to access my files, I get a message that says windows cannot access the specified device, path or file. You may not be authorized appropriate. How can I fix it?

  
  

  It comes to my laptop and I administer it / have access to passwords, etc.
  

  It simply means that your old account was the owner of that file or folder.  You can change the security to access your new account.  Here are the instructions: http://windows.microsoft.com/en-PK/windows-vista/Troubleshoot-access-denied-when-opening-files-or-folders

  (It says Vista, but the steps are the same for 7).

• When I make a selection using the lasso and try to copy the selection, nothing is copied.  Why?

  I have PhotoShop CS6 for Mac, version 13.0.6.  When I make a selection using the lasso (or any other selection tool) and select 'Copy' and try to move the selection copied, nothing is copied.  What is going on?  I can't find an answer in my search for Abobe PS or the Web site, in general.

  If you still use the selection tools when you try to move the contents of a selection, it will simply move the selection. If you want to move the content, use the tool move (but be aware that the default action is to cut; use Opt (Alt on Windows) to copy the selection by dragging).

• Can not NECC ProfileManager despite the Run area full path in quotation marks with - Switch Profile Manager. Try to copy the old profile to the new computer.

  Can not get ProfileManager to open, despite having followed closely RUN instructions in the HELP section, copy the old backup profile to new computer.

  This has happened

  Each time Firefox opened

  == I had to use a new computer because of the accident on the old.

  You don't need to run the Profile Manager to move your profile to a new PC, see this.
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• Trying to create a bootable Windows 7 x 64 Flash drive. Get the "invalid MS-DOS function" error message when you try to copy the file 'bootsect.exe.mui' of the Windows ISO on Flash drive

  The title pretty much everything said.  I have an installer the ISO of Windows 7 Professional x 64.  I am trying to create a bootable flash drive using these instructions:

  http://www.OSNews.com/story/20795/Installing_Windows_7_on_the_Aspire_One_or_Any_Other_Netbook

  I followed all the steps in the guide without problem.  Windows Explorer shows the drive is NTFS.  I can copy all other files of ISO on the FlashDrive without problem.  Only, I can't copy this file.  I tried to copy it to my hard drive rather than on the flash drive, and it still does not work.

  I tried to create a file with the same name by using Notepad to see if there was a problem with the file name.  I can copy this file on my hard drive flash drive, but I can't always copy the ISO file.

  I am running Windows 7 Home Premium x 64 edition and using a Corsair Flash Voyager 16 GB flash drive.

  Help, please!

  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Create a bootable USB:
  http://www.victorchen.info/create-a-bootable-USB-memory-stick/

  Install Windows 7 from USB drive/key
  http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
  http://www.windowsvalley.com/blog/install-Windows-Vista-and-Windows-7-using-bootable-USB-storage-device/
  http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/
  http://TechNet.Microsoft.com/en-us/magazine/dd535816.aspx

  How to install Windows 7 from a USB drive without Windows 7 ISO DVD
  http://www.Blogsdna.com/2016/how-to-install-Windows-7-from-USB-drive-without-Windows-7-ISO-DVD.htm

  How to install Windows 7 from a Flash drive with XP or Vista:
  http://www.legitreviews.com/article/1031/2/

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• When I try to install the update from Add-in for Microsoft Office file validation, I have the following error Code 80070641

  Hello

  When I try to install the Add-in for Microsoft Office file validation update, I get the following error:

  "Code 80070641 Windows Update encountered an unknown error."

  I have had problems with the Windows Installer service and think it's maybe part of the problem.  I use Windows Vista Ultimate (32 bit).

  I tried Microsoft fix 50202, but it has failed, error: "the Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  How can I fix the problem with Windows Update?

  Thank you!

  I started a second thread in responses from microsoft I thought has a different problem, but he eventually be linked to this problem.  the resolution to this and second question are posted there: http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/windows-installer-service-could-not-be-accessed/73261f27-273a-4b89-9106-3857b537e7ff

  Thanks for the help!

• Copy the value of a cell in another tab.

  Hello

  First of all, I'm french. I hope you could understand my poor English.

  I have a got a form with a tab where you can sup or ad raws.

  I gat a second tab.

  I would like to copy the value of the cell (textfield) in a cell in the second tab.

  I try ' this.rawValue = evolution.forobj.tab1.r1.txt1.rawValue; ' event, but it does not change.

  Thanks for your help.

  Nath

  Hi Nath,

  This should work in case the object in tab2 calculate:

  this.rawValue = evolution.forobj.tab1.r1.txt1.rawValue;
  

  The language must be set to Javascript.

  There is another way to approach this problem without script. So, if you can not get this to work, come back.

  Niall

  Ensure the dynamics

• Copy the value from one point to another element

  Hi all
  
  I have a few items of data selector and a check point, now I want to copy the value of the element selector data for other transmissions of data selector by clicking on the chechbox, an example of javascript?
  
  
  Thank you
  
  Deep

  Deep,

  So the objective is to copy a single date field in several date fields? try this out...

  See you soon,.

  Janet Tyson

  Published by: Tyson Janet on April 20, 2009 14:05

• How to copy the numbers in a cell to another cell and gets their total

  500.40

  192932.90

  231838 * 90

  290414 * 15

  222312 * 15

  222314 * 5

  141722 * 20

  Hello, can I ask how to copy the numbers after the period/asterisk to another cell and then add up all the numbers copied without having to type them.thank you

  Hi mirijin,

  

  Break the problem into small steps:

  Step 1. All separators (periods and asterisks) convert the asterisks.

  Formula in B2 (fill down)

  = SUBSTITUTE(A2,".","*")

  Step 2. Find the position of an asterisk in each cell.

  Formula in C2 (fill down)

  = FIND("*",B2)

  Step 3. Extract everything to the right of the asterisk.

  Formula in D2 (fill down)

  = RIGHT (B2, LEN (B2) −C2)

  Step 4. Convert the text to numbers re using the VALUE function.

  Formula in E2 (fill down)

  VALUE = (D2)

  This table has a header row and footer of the line, so the SUM in E9 apply to all cells in the body.

  = SUM (E)

  You can combine the individual forms in a unique and complex formula, or simply to hide intermediate columns B, C and D:

  

  Kind regards

  Ian.

• copy the project from one farm to another template

  Hello
  can you get it someone please let me know how to copy a project template to an another operating unit operating unit.
  Concerning
  Hawker

  Oracle Standard does not allow to copy the model or project through the unit of operation.

  Concerning
  Govind