quick question after update 5.1

Similar Questions

• I have some coherent questions after update of Firefox that I've not been able to solve.

  My problems come in a bundle and are present or absent, according to the last update. Issues appeared at the start of the madness of quick update (which was very close to me turned to Firefox). Problems remained in line with a number of updates for a few months and then were fixed. They reappear then a certain number of months. Sorry I don't follow the details of which version they are associated with greater care.

  I'm currently under Firefox 12, on Vista Home Premium, Service Pack 2.

  The bundle of issues includes:

  -not being able to open multiple instances of the combustion chamber at a time (uniform)
  -After closing Firefox, not being only unable to re - open the program without having to re - start my computer (intermittent)
  -If I leave Firefox with the media playing a Web site, sometimes the media continues to play in the background, with no way to stop it (intermittent)
  -modules are behaving erratically. When I open Firefox, I never know what icons module will still be in the toolbar. When I go to put back them into the toolbar, icons are not available in the Customize menu. Sometimes I can not open the page modules in the Tools menu. When I open it, the relevant modules are listed as 'active '. (intermittent)

  Any idea on how I can get Firefox works well again would be greatly appreciated.

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

  The issue of not being able to reopen after closing Firefox is usually caused by an add-on that is faulty. safe mode is an easy way to tell if this is the case.

• Quick question E10: update of selection lists

  Hello

  Preparing to migrate to the E10.  Small Question:

  If you update a Select list in E10 - it automatically updates all existing forms with the help of select list?

  This isn't in E9 and I found a work-around, i.e. edit HTML to pull in the values of the selection to include list content, so I have to only update a selection list in one place.

  If this isn't the case, I can do the above in E10?

  Thanks - Kar

  Hi Karen,.

  I like your idea to include the content of the lists of choice!

  E10, it depends on how you manage LPs & forms. If you use the process of "Insert Shape" in the new editor of E10 or upload HTML, it will not update if you change a list of choice, unless you save each form after. You also wouldn't be able to use your current process on the new editor of E10, except if you use a static content cloud operator and insert the HTML code yourself.

  If you take the HTML code, and do it yourself, I would continue the process you have.

  Hope that helps & good luck with your update!

• Satellite A200 - strange question after updating the graphics driver

  The problem is with the driver Mobile Intel (r) 965 Express Chipset Family. System: Grand VISTA 32 bit Home Premium Service Pack 1. Laptop: Satellite A200.

  I have installed the new driver of this (suggestion by Toshiba TEMPO) source:

  http://CE.computers.Toshiba-Europe.com/innovation/download_driver_details.jsp?id=65340&OSID=26&drive rLanguage = 42 & SOURCE = TEMPO & LNG = 20

  After switching on the computer, the system is constantly asking me ("warning on securities"), whether to execute (open) 3 files: C:\Windows\System32\igfxtray.exe /... hkcmd.exe /... igfxpers.exe. Disabling the option "Always ask before opening the file" does not help. I have to choose the option "Open / cancel / close" to continue the implementation of the windows (an option to switch). Please don't forget that I translated above mentioned communications of poles.

  Answer to the question, I received the support of Intel (r):

  ++ This is not really a problem with our drivers. This is related to the rights of the user/administrator and security functions defined by Windows * Vista. ++

  Yours faithfully,

  Maciej Kochan

  When you install the drivers, you must right click on the EXE file and choose "Run as Administrator".

  You should also temporarily disable your security software or reconfigure it to allow the file system.
  Tools such as AdAware and Spybot spyware removal (or spyware in your Internet Security package tool) may block the file system.

• Quick question after reading the definitive guide

  My question is about editing an application and creating a new application.

  The guide says:

  A. create CSK file (only to do once)

  B. CSK & CSJ AppWorld information is sent (only to do once)

  C. create a developer certificate (only to do once)

  D. Create Debug Token (this should only be done once)

  That means once an app? Once a version? Once a computer? Once a developer?

  Many thanks in advance,

  CAN.

  Once a company. Develops can (and should) share the same key, if several people can be updated even more or even applications. There are discussions about it.

• Web start questions after updated JRE (7u65)

  After the latest JRE update, my departure from the web application no longer works, the update has been associated with JRE 7 day 65 (JRE 7u65). I was able to recreate it on different machines, I get the exception message is very helpful:

  JNLPException [category: launch file error: Exception: null: LaunchDesc]

  And in the Java Console, I can see the following output:

  # Java Web Start Error:

  # Could not find class main se.linkon.sabine.clients.sabineclient.invoker.NBRunWrapper in...

  Do you have an idea what is wrong? Why the web Starter cannot find class main? This could be a bug in JRE 7u65? I've tried my application with JRE 7u55 and it works smoothly.

  Best regards

  For me, this problem has been resolved by putting the main pot in a jar that contains the main class.

  I had the same problem with an application that uses a wrapper pot that has just a signed JNLP and a manifest with a classpath in the real main container (and anything other than this one pot) but it contains no classes. I was able to solve this problem by adding a few wrapper class files in the jar of wrapper and use one of those as my main class.

  I'm unable to identify changes in the release notes of 7u65 that causes this problem though. I also have another application where the packaging has no main class, but it doesn't have the full path. This application does not have this issue.

• Satellite P50T - USB3.0 question after update Win8.1

  I had the bad Win8.1 recent update which gave a blue screen on reboot, but I got it using the restore to an earlier date.
  However, since my USBB3.0 ports have been intermittent. One is almost useless, 2 are intermittent and one is partially intermittent.
  I reinstalled all the drivers a few times, contributing for a few hours, then it restarts. Help to restart a bit also.

  Drivers USB used to be labeled as such, but now seem to be integrated with another. I assumed that they are in the chipset drivers but some say they are now only in Win8.1 itself. Can someone enlighten me on this?

  Also the last 1.2 BIOS .exe file downloaded from the Australian site has instructions in Chinese only. It would be nice to have an English version for an English speaking country. I am aware that the changelog does not have USB in the upgrade, then it will probably not help anyway.

  USB 3.0 drivers are part of the system Windows 8.1.
  Using Win 7, it is necessary to install additional USB 3.0 drivers but since win 8 this isn t the case.

  From my point of few reason why don t USB ports work was the recent Blue Screen fault.
  The BSOD appears due to serious problems of software or hardware failure.

  I'm not quite sure if setting the time system start point would be enough good to get all problems solved I guess where the USB ports are not really defective Toshiba recovery should help solve the problem of m.

  Which from my point of view of a few you should try it

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• The crashing apps and battery drains quickly after updating iOS 9.2

  Well, that's what's happening: before upgrading to iOS 9.2, no app crashed, my battery lasted all day and everything was fine, but after update, applications such as Facebook, YouTube, Maps, even (Yes, stock cards, no Google or whatever it is) kept crashing and now I have to charge it twice a day to operate. Also, I noticed it worked a bit hot too, don't know if that is related to the battery issue, but he started to be going after the update, before, he had run cool, so I don't think is a hardware problem. If there is a solution, please let me know, because it's pretty boring, gtting thanks in advance.

  You must close information apps, iOS 9.2 takes about 5 GB of storage, so I think that you have a 8 GB model

• In input/out live telephone calls have "broken" sound only after updating to iOS 9.3 update on 6, please help...

  All entry/out live telephone calls have 'broken' sound only & unable to play the music on my phone after update to iOS 9.3 update on 6, please help...

  Hi there dmaclatchy,

  It sounds slipped you can not use the app phone on your phone, because the sound is uneven or inaudible and something is happening with your music do not let play. I want to quit all applications running on the phone:

  Force an app to close the iOS

  1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. slide to the left to find the application you want to close.
  3. push upward on the overview of the application to close.

  When you have done that reboot the device and test again the question:

  iOS: switch off and on (restart) and reset
  
  If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Let us know how it goes! Thank you for using communities of Apple Support.

• 2 really quick questions

  Hey everyone, I got 2 really quick questions on ESX 3.5:

  We have a small group of 2 lovely R900s, about 50 people running and when I restore updates, one machine is usually powerful enough to run all the guests by itself. Because virtual machines are migrated from one to another, after the update, all or most machines tend to stay on one of the hosts. Is there a way to tell the DRS automatically re - balance resources (i.e. migrate about half of the load to the other server)?

  Also, what would be the cause of Manager update being impossible to apply all updates during the reclamation? Often, I have to make multiple passes to get the servers completely up to date. Is this normal?

  Thank you!

  cecjr

  Just let DRS do its thing, it can take a long time to make a decision. If you want a quicker response you can assign it aggressive or moderately aggressive.

  It is normal that some Update Manager passes, depending on what patches are installed and dependencies.

  If you have found this question to be good, or useful, don't forget to award points.

  Dennis Procopio - VCP

• Can't take screenshots after update

  After updating cannot take screenshots with iPad or iPhone 5 s. down Siri or home screen or power. Tried the stuff on google, but nothing helped!

  Very quickly and simultaneously press on and then stop pressing the home and on / off buttons.

• After updating, my iphone blocked from Iphoto, itunes

  After updating my Iphone 5, it can more interact with Iphoto or Itunes on my laptop (2008 ongoing OSx 10.6.8). Macbook When I open Itunes, the error message reads "Itunes could not connect to the Iphone because an invalid response received from this device". When I run Iphoto, the error that says "Photos cannot be viewed or imported because the Iphone is blocked with an access code...". "but the password is disabled. When I plug the Iphone into the USB I am asked to trust/mistrust the phone, I choose the trust.

  Hello CA 22!

  Thank you for using communities Support from Apple! We see it in your post that you are having problems using your iPhone 5 that has been upgraded to iOS 10 with your Mac running Mac OS X 10.6.8.

  To use your iPhone 5 with iOS 10 with your Mac, you must first Download iTunes 12.5.1 which requires Mac OS X 10.9.5 Mavericks or later to install.

  Please let us know if that answers your question.

  Sincere greetings.

• 7 full storage after update 10.0.2 iOS iPhone?

  Anyone else running in stock full questions after the last update? I did a complete from scratch beginning when I got the iPhone 7 since I last saved would not restore from iCloud was so pretty happy with the amount of additional storage space I had with the new phone, but after the update, there is something to do with my storage on the device. I added everything under the settings menu and its certainly not adding up to anywhere near the capacity of the device and even wiped all caches the app and safari caches. Any ideas?

  Plugged into iTunes to see how it broke down the 32 GB of storage, says I have only 2.3 GB free after removing a few apps, but other bars don't add up.

  • Photos (purple) = 305 MB
  • Apps (green) = 3.97 GB
  • Docs & data (teal'c) = 1.7 GB
  • Other (yellow) = 2.23 GB