Satellite P50T - USB3.0 question after update Win8.1

Similar Questions

• My C850 Satellite will not be closed after update Win8.1

  I hope I can get help from this forum. Since I've updated my OS from windows 8 for windows 8.1 as my laptop (Toshiba c850) refused to stop, the screen goes blank (power off dark, signaling), but still the power light stays on, had to make a forced turn off many times.

  Please help because I'm losing my mind.

  Hello

  In my opinion, something was wrong during the upgrade.
  This is not unusual since I have read in various forums on strange issue after upgrade Windows 8.1.

  I recommend you do following:
  Set the computer laptop back to factory settings. Recover the laptop Windows 8
  Updated 8 Windows to the last State (all updates, patches must be installed)

  Then check the windows 8.1 upgrade information page http://www.toshiba.eu/innovation/generic/windows8_1-message/ and follow the step by step instructions that contain also the facility of 8.1 and tools Windows drivers in the correct order!

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• Satellite L855 - 13 G - can't adjust the brightness after update Win8

  Hello

  After update of windows 8 and installed the latest AMD driver on the Toshiba site, I cannot adjust the brightness of the screen using the Fn F2 or F3.

  In this thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=69752&tstart=45
  He says that he has solved his problem but how?

  I installed the Package value added, but no change

  Thank you

  Franco said he has updated the graphics driver and it helped

• Satellite C660 - no Internet connection after updating BIOS

  I am a novice user and have a Satellite C660 under warranty that I don't use for surfing the net and Ebay so I hope I can explain my problem!

  Toshiba bulletin board said that the need to update BIOS, so I followed the instructions but since then I have no internet connection, and cannot restore the connection that I lost all help Toshiba Bulletin Board today lost and none of the programs to sort the problems work - e.g.set assistants etc. I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?

  Can someone tell me if it's a failure caused by the BIOS update or I would return laptop to John Lewis for repair? Thank you very much for reading this

  Hey Buddy,

  The default settings in the BIOS load after update? If this is not the case, go into the BIOS and load the default settings. You can enter the BIOS if you press F2 before Windows start and then press the F9 key to load defaults. Then save & exit the BIOS Setup.

  You can access the Internet now?
  You try to access the Internet with LAN or WLAN connection?

  Also check device manager if all devices are recognized correctly.

  > I did not yet create rescue disks, but if I try to create them now I'll be able to restore to factory settings?
  You can create the Toshiba Recovery disk every time. Just launch the pre-installed Toshiba Recovery Media Creator and follow the instructions on the screen. You need just a few blank DVDs to create the discs. Disks contain a factory image of settings which can be restored each time and how many times you want to so with these disks, you are on the safe side ;)

• Catalyst Control Center does not work after update win8.1

  My computer model mobile no is 017tx - Hp pavillion 15th,after update of victory 8 to win 8.1, Catalyst Control Center does not work. So I'm unable to move from the graphics options.

  Hello

  Try this uninatall current display AMD drivers and install the one from the link below

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124003-1&cc=us&DLC=en&LC=en&OS=4158&product=5389906&sw_lang=

  For other drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5389906#n402

• Satellite A200 - strange question after updating the graphics driver

  The problem is with the driver Mobile Intel (r) 965 Express Chipset Family. System: Grand VISTA 32 bit Home Premium Service Pack 1. Laptop: Satellite A200.

  I have installed the new driver of this (suggestion by Toshiba TEMPO) source:

  http://CE.computers.Toshiba-Europe.com/innovation/download_driver_details.jsp?id=65340&OSID=26&drive rLanguage = 42 & SOURCE = TEMPO & LNG = 20

  After switching on the computer, the system is constantly asking me ("warning on securities"), whether to execute (open) 3 files: C:\Windows\System32\igfxtray.exe /... hkcmd.exe /... igfxpers.exe. Disabling the option "Always ask before opening the file" does not help. I have to choose the option "Open / cancel / close" to continue the implementation of the windows (an option to switch). Please don't forget that I translated above mentioned communications of poles.

  Answer to the question, I received the support of Intel (r):

  ++ This is not really a problem with our drivers. This is related to the rights of the user/administrator and security functions defined by Windows * Vista. ++

  Yours faithfully,

  Maciej Kochan

  When you install the drivers, you must right click on the EXE file and choose "Run as Administrator".

  You should also temporarily disable your security software or reconfigure it to allow the file system.
  Tools such as AdAware and Spybot spyware removal (or spyware in your Internet Security package tool) may block the file system.

• Satellite P50-A-144 - FN + z key does not work after update Win8.1

  Hello
  a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
  Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

  How could I solve this problem? It's my OCD tingle.

  Thanks for all the replies :D

  Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

  I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

  You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• Satellite M30-304 - strange questions after BIOS update

  Hi all

  I updated my BIOS according to the good driver for Satellite M30. However, since this operation took the endless problems with screen and wireless card. Also the screen used to display flash BIOS only now them a Centrino, Centrino logo sometimes sometimes Mr. Pentium, I don't know that the version of BIOS is incorrect for my laptop. If I try to re - install the upgrade, it is said version already installed 1.7, so will not continue.

  1. is there a way to force the re - install the same version?
  2. someone can the upgrade me of the correct BIOS Setup for the model n ° PSM30E-0QKJ1-5U, I installed the version was 20070807154017

  The history is quite interesting. AFAIK Centrino logo is there if the Centrino platform is in use.

  The Centrino platform consists of:
  an Intel Pentium M processor
  a chipset Intel 855 of the series
  an Intel PRO/Wireless 2100 or later 2200 (IEEE 802 11 b) mini-PCI wireless adapter

  If a component is removed (Intel PRO/Wireless mini-PCI wireless adapter) the Centrino logo will disappear. I don't really know why logo is from time to time, but you did the right BIOS update. There is no other for your laptop model.

  Can you please tell me what is the problem with your wireless network adapter? You can use just sporadically or what?

• Satellite NB10t-A - Webcam does not work after update Win8.1

  Hello

  I have recently upgraded to Windows 8.1 and then my Webcam does not work... I checked if I have the driver in Device Manager but I couldn't find it. I don't know how can I fix what I was looking for driver thosiba Web site but got no results.
  Can someone help me?

  Thank you

  The BIOS usually contain an option to enable and disable the internal webcam.
  Go to the BIOS by pressing F2 and then check if the webcam is enabled.

• Satellite C50B freezes at startup after update BIOS to 5.10

  Hello
  I updated the BIOS of my Satellite C50 - B - 14 d (PSCMLE) to 5.10 (a final release early sept. 2015).
  The update succeeded, and the laptop runs as long as I do not install the drivers for the card WiFi (Atheros AR9485).
  If I try to install the driver (it does not matter which, those of the Toshiba website or those of the manufacturer, of), the laptop crashes before the end of the installer.
  Installing drivers from Device Manager makes the laptop freeze on when Windows starts (I tried 7, 8.1, and 10).
  Completely on the Windows logo screen it freezes, and I have to turn off it.

  In addition, the wired network adapter is not detected (it does not appear in Device Manager).
  The same question is described here (http://www.eightforums.com/general-s...ses-start.html), but no solution.

  Any suggestion? The BIOS may be downgraded? The BIOS update utility does not Flash an older version.

  Thank you!

  Hi indutry,

  I also have exactly the same problem since updating my BIOS to 5.10 with my Toshiba C50 - B - 14 d PSC MLE

  I have to start windows in safe mode without network to disable the Atheros AR9485 before restarting again in normal mode.
  I now have to use an external WiFi adapter as my LAN port is now also lack!

  Upset that the BIOS update has broken all my embedded network on the laptop.

  I tried to update the Atheros drivers to the latest version, but as soon as the device is turned on again the system crashes and we're back to square one.

  There is no solution that I can find other than turning off the unit and live without built in WiFi + LAN.

  I hope Toshiba can be remedied with a new BIOS update?

• Satellite A300 - pad touch dead after update BIOS 2.20

  Hello

  exact model is Satellite A300 PSAGCA-06M01N under Win XP.

  I had a problem with the webcam, and I read in the forum that it can be solved by a BIOS update. so, I advanced and downloaded the latest version of the BIOS on the site of toshiba, especially for my laptop model. It went quite well with no error.

  However when the computer restarts after that the BIOS updated my touchpad no longer works.
  I went to Device Manager and could still see the Synaptics touchpad device and it says "this device is functioning correctly. but its completely dead and will not respond with the 2 keys. before I updated the BIOS I never had any problems with it.

  I tried FN + F9, nothing helps. plugged in a USB mouse and it works without any problem. In fact, when I plugged in the mouse the synaptics software says "Deactivation of the key because of the external pointing device" for the device driver for the touchpad works.

  If I remove the mouse, it will say the touchpad is restored, but it still doesn't work. restarted several times and still the same problem. went into BIOS and chose "default" not still a no go.

  Can someone offer any advice or ideas please?
  I really need the touchpad for the way I use the laptop...

  Hello

  In many cases, the touchpad (pointing device) can be enabled and disabled in the BIOS.
  I think you should check if this option is available in BIOS and if so, check whether it should be enabled.

• I have some coherent questions after update of Firefox that I've not been able to solve.

  My problems come in a bundle and are present or absent, according to the last update. Issues appeared at the start of the madness of quick update (which was very close to me turned to Firefox). Problems remained in line with a number of updates for a few months and then were fixed. They reappear then a certain number of months. Sorry I don't follow the details of which version they are associated with greater care.

  I'm currently under Firefox 12, on Vista Home Premium, Service Pack 2.

  The bundle of issues includes:

  -not being able to open multiple instances of the combustion chamber at a time (uniform)
  -After closing Firefox, not being only unable to re - open the program without having to re - start my computer (intermittent)
  -If I leave Firefox with the media playing a Web site, sometimes the media continues to play in the background, with no way to stop it (intermittent)
  -modules are behaving erratically. When I open Firefox, I never know what icons module will still be in the toolbar. When I go to put back them into the toolbar, icons are not available in the Customize menu. Sometimes I can not open the page modules in the Tools menu. When I open it, the relevant modules are listed as 'active '. (intermittent)

  Any idea on how I can get Firefox works well again would be greatly appreciated.

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

  The issue of not being able to reopen after closing Firefox is usually caused by an add-on that is faulty. safe mode is an easy way to tell if this is the case.

• Satellite X 200-219: Question about updating the display driver?

  Sad tales I've heard talk about manufacturers of laptop never updated to gfx card drivers apply to toshiba?

  Any info on the question of whether an update for their SLi systems drivers display is on the horizon?

  see you soon-

  The fact is that display driver cannot be updated daily as for desktop computers. Priority by the manufacturers of cell phones is worrying about the operation of the equipment. Using new graphics card drivers will be forced to run faster and better that offers better graphics performance. The result is essentially an overheating and may end with a faulty graphics card.

  In this case, the card mother together must be exchanged and it costs a lot of money. So, I think that no one can say with certainty when the next pilot will be available.

• Satellite P500 - screen remains blank after updating BIOS 2.90

  I installed the new WOOD update through the station of service and after restart, the screen remains blank (out of service)?

  Any suggestions?

  Hello

  And on the external monitor you see a photo or not?

  In my opinion, something goes wrong during the update of the BIOS, and so the entire computer doesn t start anymore. All updates are pre-tested by Toshiba, so I doubt that only the screen isn't working anymore.

  You should try to remove the battery and unplug the AC adapter for an hour. Then install the battery and plug in the AC adapter. Make sure the battery is fully charged and then try to start your laptop.

  It's working now?