Quick question on actual spending and effective PPI

Similar Questions

• Can "Real PPI" and "Effective PPI" be extracted InDesign?

  A script that I maybe need access within InDesign and extract the actual PPI and Effective PPI of some images and then process the images in Photoshop. These variables are available to scripts?

  Yes, Image has properties: effectivePpi and actualPpi.

• quick question on the DMZ and networking

  Need help please, I am a newbie to vm and need quick help...

  I have a well-configured firewall and 1 Server ESXi 5.5 configuration to test only at home...

  My firewall has 2 ports for internal network and one connected to my ISP

  I have the internal ports

  Port LAN ip 1 local schema with DHCP server running on the firewall

  Port 2 is DMZ, I have 4 static ip to use for remote mail, web server

  on an ESX Server, I have 2 NICs 1 plugged into port DMZ and LAN 1 port firewall

  What is the best way to separate these 2 and make them work

  internal vms example has no access to the DMZ and will have no LAN NIC, added to the virtual machine

  But Web servers and mail server should have connected NIC times and each nic gets entered the appropriate IP address based on what network card and the network it uses

  Can I use 1 switch vm and vm 1 network? or 1 vm change and create 2 networks? How to configure NIC and vmnetworks to communicate properly?

  Since you have two separate network, an in-house cards and a demilitarized zone, you will need two vSwitches. Each with a network card. The first will be your internal network and management, the other for the demilitarized zone.

  Then, you will need to create the appropriate exchanges.

• Quick question on mobile sites and publishing.

  I currently have a site office at fabhollie.com

  I would like to start designing a site phone and tablet. My question is can I publish only site office rather than all three? I would like to be able to work on the mobile site without publishing them until I finished them. Some content on my I have to update every week. Is it possible that I can make these changes on my desktop site and publish them without phone and table unfinished pages? Thank you.

  You can definitely! ;-)

  Go into your properties website. Select Mobile on the left, then uncheck the button redirect down, down to the right. It will still release the mobile site to the live server so you can test it, but it will not automatically redirect until you check that box again.

  It is a feature designed for exactly what you want to do.

  

• Quick question on ESX3.5 and Vcenter 2.5

  Hello

  We are running Vcenter 2.5 and ESX 3.0.3 and have a problem where when we try to create a VM on vcenter he tells us to "File is larger than the maximum size supported".

  This problem has nothing to do with the data store or whatever it is because we have worked with vmware and they said he knows bug and that we should upgrade to esx 3.5 while a resolution is sought by the genius of vmware.

  So, we plan to goto ESX 3.5 for this problem and have installed a host esx 3.5 that has solved the problem.  But before go us full full on ESX 3.5 with Vcenter 2.5 wanted to see if there are other issues in this configuration we should know about.  Is there a common question with ESX 3.5 and 2.5 Vcenter configuration that we should know of.

  Your help is appreciated in advance.

  N

  I want to comb through the release notes to determine if there are specific problems with regard to your environment.

  http://www.VMware.com/support/VI3/doc/vi3_esx35u3_rel_notes.html

  In general, I didn't witness had specific issues that might influence do not update.

• A quick question on the microphone and speakers of M4

  The volume level seems a little weak because people appearing on the line does not hear me. As I do not have the right. A simple test with dictaphone (according to Google room of course) shows a very low level of entrants seems so I can't hear the recording properly with volume maximum speaker level of music (which placed on the lower edge). The volume level of the General enclosure (on top of the phone) is also lower it should be comfortable. I know that the M4 is waterproof and the microphone hole is covered with something, but do the things normal volume for this kind of phones? Own phone for a week.

  Thanks in advance and sorry for grammar mistakes.

  @StasGrim

  Start safe mode

  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

  > settings > about phone > diagnostics > test your phone

• Two quick questions (hopefully) - right way to dynamically change the CSS class and put of Splash screen implemented

  Couple of quick questions have left me speechless!

  So, it seems obvious that many JavaFX applications want to dynamically change the CSS styles.  Is the best way to do it through la.getStyleClass () .add ("classname") < node >?  The underlying data structure is a list of observable.  So let's say we have 5 styles that simply to change the fill color of a circle of 5 different colors, respectively.  So if I have a condition in which I want to dynamically apply 1 of these 5 styles, as I do now it's by setting all 5 styles as a string in a list by using a static initializer, then I call < node > .getStyleClass () .removeAll (list), then getStyleClass () .add ("classname").  I do this to avoid adding again and still the same style and inflate the underlying list.  What is the right way to manage dynamic CSS styles?

  Finally a very simple I think.  So I know there's a little differently to implement a splash screen.  My app has certainly got bigger in the last few months of development and I noticed there are about a 5 second delay between when I run the application when I see the main stage.  I was thinking what a splash screen would be nice to fill that time.  I had no time to prototype using a Preloader and I fear that using another, early stage start-up again would be too long of a delay.  "I actually thought that using the Nice and simple JVM argument" - splash: image name > "would be simple, easy and effective.  Unfortunately when I try to do, the splash screen appears but never goes away.  Anyone know what is happening with this?

  Your mechanism to manage the css style classes is a good approach; I've used several times. I wonder why the style classes have been implemented as a list, instead of a game, but there may be cases of good use for the use of a list.

  In some cases you can also consider using CSS PsuedoClasses, which were presented in JavaFX 8. Here is a little easier to use, especially if you have two options. But a use case might look like:

  public class Message {
      public enum Status { NORMAL, WARNING, CRITICAL }
  
      private final ObjectProperty status = new SimpleObjectProperty<>(Status.NORMAL);
      private final StringProperty message = new SimpleStringProperty();
  
      // constructor, getters, setters, and property accessors....
  }
  

  public Label createLabel(Message message) {
      PseudoClass warning = PseudoClass.getPseudoClass("warning");
      PseudoClass critical = PseudoClass.getPseudoClass("critical");
  
      Label label = new Label();
      label.textProperty().bind(message.messageProperty());
      message.statusProperty().addListener((obs, oldStatus, newStatus) -> {
          label.pseudoClassStateChanged(warning, newStatus == Message.Status.WARNING);
          label.pseudoClassStateChanged(critical, newStatus == Message.Status.CRITICAL);
      }
      return label ;
  }
  

  And then your css looks like

  .label:warning {
      -fx-text-fill: orange ;
  }
  .label:critical {
      -fx-text-fill: red ;
  }
  

• If I'm the financials management manually, how can I show planned and actual spending?

  Some companies want to manage all the finances manually and see the planned and actual spending.  How is that possible?

  If you manage finances in a manual mode, how to manage planned and actual finance is to:

  1. go to the monthly tab and fill out your finances (planned) expected.

  2 create a snapshot

  3. you now have two choices.

  3. you can remove all finance is entered monthly and updates tab to date with real being

  3B. or you can simply update the monthly entries with your actual expenses

  4 either compare against the snapshot for the variance.

• InDesign CS6 link real and effective Panel missed ppi PhothShop eps

  InDesign CS6 link real and effective Panel missed ppi PhothShop eps

  ohmnath wrote:

  Hi Lapiz,

  This is an expected behavior. You will get information ppi for raster as JPEG images, not for the vector images based as EPS.

  Kind regards

  OM

  Hello Om,

  in place of the image files EPS PhotoShop, InDesign is able to calculate the effective PPI.

  Not in the links Panel, but with its preflight feature.

  

  Here is an example for some parameters with a preflight profile.

  Note: The values are examples. Insert values that correspond to your needs.

  

  Set your minimum values high enough and you will be reported on each value effective ppi for every PhotoShop image placed in your document.

  In my view, an expected behavior would be to calculate the effective ppi for PhotoShop EPS images in the links Panel.

  Like preflight display, it can be done.

  Kind regards
  Uwe

• Question of mixer audio with effects and sends visibility

  I started to add an effect to the dynamics of a totality of the channel inside the mixer Audio Track. There is a bug that appears quite often, and I want to know if everyone is touched by it.

  I'm perfectly up-to-date (first Pro CC 2015.1), but this bug may affect earlier versions of the software, too. I think I remember what happens in the earlier versions of CC, but cannot guarantee.

  I'll be referring to the button small triangle that opens and closes the section effects / sends that runs when you click a "spinner".

  Steps to reproduce:

  • Note: I have the project window and mixing of Audio tracks anchored in the same area.
  • Click on "show/hide effects and sends" rotate open the effects
  • Save your prproj file and close Adobe Premiere Pro
  • Open Adobe Premiere Pro and open the same prproj file
  • The spinner is open as if the effects and departures must be visible, but they are not.

  Now, I have to click twice on the spinner twice to actually see the effects and sends.

  This is a minor bug, but I find it affects me often and it's embarrassing.

  Can anyone else reproduce?

  I'm still on Windows 8.1, and my screen resolution is 3840 x 2160 with scaling (100% SETTING)

  Yes did the same thing with me, my mixer track is in stand-alone mode.

• Effective PPI

  When I check a resolution of image related to a print file in InDesign, I see effective PPI on the real lower PPI.

  Anyone know what this is and if the effective PPI is supposed to 300ppi for print as well, how do 300?

  

  Effective PPI is the actual PPI (the resolution at which the image has been saved) divided by the scale factor. If you enlarge the image on the page, the effective resolution goes down, if you reduce, it goes upward. I like to think about it, like a printed ball - if you inflate the balloon the image expands by stretching everything as the pixels get fat when you enlarge an image on your page.

• Why change format effective PPI?

  Hello!

  Effective ppi format change to 'effective resolution', as 2356x1678px. I want to return to actual ppi, as 370ppi. How to get back?

  

  When you see two numbers like this, it means your image is climbed differently in the horizontal and vertical axes and is distorted.

• Quick mask sometimes Exchange forefront and background - colors

  I use a lot quick mask, and I find some of the user interface issues in imagine.

  (1) sometimes when I switch to quick mask (Q key) mode, forefront colors and background reverse. Sometimes they have not. At the moment they are on a computer but that you don't have on the other hand. I've never been able to understand why this is, or what I can do to change. (FWIW, in my view, the reversal of the colours to more confusion, and I hate when they don't change).

  (2) when I go in the Quick Mask mode and then get out, my changes of selected layer. If I have a selected layer mask, then hit the Q key twice will be the selection of the layer for the pixels in the layer mask. I can't tell you how many times this has led to edit pixels rather than the mask. Is it possible to disable this option, so that the layer mask is selected? (If not, I'll post this as a feature request).

  (3) I tend to work full screen mode. Is there some landmark easily recognized if I am in master view fast or not other than the State of the button quick mask the hard-to-see "down"? I am continually getting confused because sometimes when I work quickly, it seems that the Q does not record, so I hit him twice, and then I spend a few seconds trying to figure on what mode I. I like the text in the window that gives me instant feedback of my status, but I like the extra pixels of mode full-screen. Y at - it another option that gives me full screen but easily seen your comments on my editing mode?

  I use Photoshop CS 6 for Macintosh. The title of my post reflects my pressing question most on the quick mask, but has decided to examine the possibility to publish other issues.

  TIA

  Alan

  There seems to be at least three sets of foreground/background colors:

  Channels of a color. -default black and white

  B. quick mask channel - default black and white

  The channels Alpha C. and mask - default white/black

  I was framed by the Alpha and the default mask is the opposite of other default values.

• M6-1105DX: M6 Envy laptop allows you to quickly switch between classic interface and metro

  My phone starting son suddenly quickly switch between desktops classics and metro when you log on his user account.  When I booted in safe mode it is moved, and I was able to move normally between two desktop computers using the touch pad and start of the windows key.

  I then tried selective startup, disabling each item displayed in the Manager of tasks (one at a time) and reboot.  These changes had no effect.  Startup items listed are:

  HP Coolsense

  HP Messenger service

  hpww ECS application

  IDT Audio of PC

  Power DVD RC Service

  Scan the Activation App toPC

  Synaptics touchpad enhancements

  I don't know what to try at this point.  Any suggestions would be greatly appreciated.  Thank you

  Bill

  Hi there @Bill38,

  You should be able to run a virus scan and use the Microsoft Fix tool, check the drivers etc without failure or Mode in Mode safe mode with networking.

  Let me know how it goes.

  Thank you.

• Just a quick question about the appearance of the cluster

  Hello, this is Matthew, just a quick question about the appearance of the cluster

  Is there anyway to rearrange the order of the elements? I know cutting automatic resizing, I could move the items by hand. But if I use the cluster somewhere else, I have to move the items again...

  What I want is of the order of "Mx My Mz Ax Ay Az Temp voltage CS".

  Is there a quicker way to deal with?

  THz so much!

  You can right-click the border of the cluster and choose "arrange control cluster...". "The user interface is not as intuitive as it could be, but it will allow you to reorder items. If you use the cluster in several places, you should make the cluster in a type definition and replace all current uses of the latter with the type definition, so that they all match. They will also update automatically when you make changes to the type definition. Otherwise, you could have a situation where you have multiple groups with the same data types, but with elements in a different order, and your data will be getting a new denominated, when wire you the whole clusters. The data will be in the same order, but given that the item labels are in a different order, you can't get the data you want, when ungroup you by name.