Quick Viewer problem
My wife runs a program of Embird embroidery. While trying to work with a design, a quick Viewer window opens and locks work. The only way out is to restart the computer. Is there a way to turn off or disable quick view? Thanks for any input.
Hello
I suggest you to uninstall and reinstall the program and check if it helps:
http://support.Microsoft.com/kb/307895
It will be useful.
Tags: Windows
Similar Questions
-
Quick views in the pane of folders in Windows Live Mail
I recently received some emails that are not in my Inbox. Two of them came in fast mode as 'Spam '. I have read them and tried to designate them as "not Spam." However I can't locate.
Today I received another email and it appeared in the Quick views as "unread". I read the e-mail, but now cannot locate. After reading it, the email disappeared quickly.
All emails appear on my tablet. I am a little concerned that the emails are important and I can't afford is not to see them easily. Normally all the emails only appear in the Inbox and I don't understand what is happening.
Thanks for any help.
OT: Live mail Inbox
Bob Andrew
Hi Bob,
Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.
A quick view is view a selection of messages in mail folders. Any message that you see in the Quick views is actually located in one of the folders that you can see in the files pane. Windows Live Mail only 'auto delete' whatever it is. If you are facing the same question next time, hear is the procedure to enable or disable the quick pane.
Open Windows Live mail > toolbar above, click on view > click on filters > should be the point of view quick return at the top of the folders pane.
I hope this helps. Let us know if you have other problems with Windows in the future.
-
2159 m 'Quick View Modes '.
I just bought a new monitor of 2159 m. Manual and the page of the HP store for her (http://www.shopping.hp.com/product/display/display//3/storefronts/FV585AA%2523ABA), the State "Customize your opinion: optimize display for movies, pictures or games with one of the fast display modes. But where can I find these 'Quick views '? I've been through OSD menus and I don't know that it isn't here. The manual does not help you, it comes, it lists as characteristic but said nothing more on the subject. I am connected via DVI if that makes a difference.
Could someone help me please? This feature was a major decision-maker in when choosing the 2159 m above other monitors.
Thank you
I 2009f OSD should be the same. Its located color slot, fast display.
-
In windows live quick view mail, how can I activate the button Delete
Hello
When I opened my windows live mail, I can see a quick view, which is great. There are more than 3,000 mail there that I don't need. When I click on the button Delete is in shadow. How can I activate the button Delete or is there a quick way to delete these messages at once. I'm working on Windows xp
Hello
The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
-
Creating a dashboard with the quick view component included.
I'm new to Foglight (6.5) and try to create a dashboard for my overview of the virtual environment in a first time, so I can allow others to see.
I was able to create a view that contains the main clusters, an alarm summary and so on, BUT I would like to be able to include the quick view component that appears on the front of the virtual environment summary at the top of the dashboard and can't seem to find a way to do it.
CNA anyone help?Because of the complex environment that supports the component entries he has not been exposed for use with drag and drop. The component is provided with context so the tiles above as a whole and / or types of alarm and by the selected service name. Provide all these entries a drag / move dashboard or report is too complex.
Are there some aspects of visualization that you particularly want to see? -
Tag/function missing 'Element Quick View'
I use the latest version of Dreamweaver CC 2015 and the tag/function 'Item Quick View' is missing. Please help and TIA.
Hello
You can use Panel of DOM for the same thing. You can open it from Windows-> DOM
I hope this helps!
Kusha
-
Error creating surveys Quick View
Hi all
I read < b > Oracle® Fusion Middleware Developer Guide for Oracle WebCenter
11g Release 1 (11.1.1.4.0) < /b > book.
article how to add the quick view of surveys to your Page < /b > < b > 37.2.2.2
When I run my app and try to make a new poll, once I click the < b > Ok < /b >, this popup warning message is displayed.
Any suggestion?Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.ValidationException Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS]. Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter/CustomPortalDS' didn't find subcontext 'jdbc'. Resolved ''; remaining name 'jdbc/webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
Published by: M.Jabr on April 14, 2011 13:05You have created a connection to your schema webcenter in JDeveloper as described in this documentation: http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10148/jpsdg_svc_intro.htm#CEGEJAIF
Polls service requires the connection, other wise it will resolve this error. -
Fast refresh materialized view problems
I have two databases (A and B).
In A database, user NICK has a table called COLOUR_MASTER.
Also in this database, NICK issues creating materialized command newspaper view colour_master with the primary key, including the new values (and Yes, there is a primary key defined for this table)
In database B, there is a link of database called A_LINK, connect, Nick, identified by password using 'dbA ';
In database B, user IAN also creates a materialized view CM_MV cool off quickly in select * from colour_master@A_LINK
This statement is done correctly, and there are several million lines in CM_MV when it's done.
Immediately, IAN issued this command:
Start
dbms_mview. Refresh ('CM_MV');
end;
.. .and after a small pause, it gets the error
ORA-12008: error path refresh materialized view
ORA-02068: following sever error of A_LINK
ORA-03113: end of file on communication channel
One more + "select count (*) of colour_master@A_LINK" + subject immediately manages to return the correct number of records in the database so A 3113 is a bit misleading, I think that, in this case have crash, the database remains accessible at all times, there is no network problem (database A and B are both located in the same server so it of not like I'm trying of) connect to halfway around the globe).
The only thing I can think is that there is a permissions issue causes this error. The creation of MV because is made via a link, it is not a problem of IAN see all appropriate, but once the updates come into play, it is perhaps.
Any who can shed light on why I can't do the fast refresh from the view, I can create joyfully, please?I'm surprised no one asked you to do what is obvious: try to do a select * from colour_master@A_LINK, without that being wrapped in a create materialized MATERIALIZED view. Just do a simple select * from...
My bet is that you will get an error ORA_22992 can not use selected from the remote tables LOB Locators . And if you can't do a simple select * in a remote table, I suspect that you can reasonably expect Fireworks when you try to create or refresh a view materialized on such a thing!
Here's a quick test:
In the 1 database:
=========SQL> create table A (col1 varchar2(2), col2 clob); Table created. SQL> alter table A add constraint A1 primary key (col1); Table altered. SQL> insert into A values ('AA','This is an entry into a clob column'); 1 row created. SQL> commit; Commit complete. SQL> create materialized view log on A with primary key including new values; Materialized view log created.
In the database 2
=========SQL> connect ims_global/v0yager1@ussd Connected. SQL> create materialized view B refresh fast as 2 select * from A@remotedb_link; Materialized view created. SQL> exec dbms_mview.refresh('B'); BEGIN dbms_mview.refresh('B'); END; * ERROR at line 1: ORA-12008: error in materialized view refresh path ORA-02068: following severe error from REMOTEDB_LINK ORA-03113: end-of-file on communication channel ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2251 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2457 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2426 ORA-06512: at line 1 SQL> drop materialized view B; Materialized view dropped. SQL> create materialized view B refresh fast as 2 select col1 from A@ims_link; Materialized view created. SQL> exec dbms_mview.refresh('B'); PL/SQL procedure successfully completed.
Which seems to reproduce your problem rather well, I think.
I don't know if there is no work around for this. I mean, obviously you can't miss the CLOB column in your statement of 'create a MV' as I just did, but I don't know if you're still allowed or expected to be able to create a MV on lob columns and that such and such correction will allow you to do. Maybe someone else can provide this information.
But at least you won't have to play Russian roulette with your init.ora parameters!
-
I have FF ver 19.0.2. I downloaded cache viewer suite 0.9.3 and it shows in FF addons.
However, the button for the cache viewer does not show in the toolbar, so I can't use it...
I tried to remove and reinstall, it happens the same thing.
How can I get the continuous button cache viewer to appear on the toolbar?
I got it on older versions of FF, and it worked (also an earlier version of the cache Viewer).The module Bar shows?
https://support.Mozilla.org/en-us/KB/add-on-bar-quick-access-to-add-ons
-
I'm having problems with my windows fax viewer: when receiving attachments by peaks of jpg email etc form family friends when I download then discovers through the viewer of fax Win if I click on the button forward or backward, I found more than 100 attached photos that were not sent by family or friends, and the other images icons photos trash etc.; and many are files of type 'the porn core. " I have clear and delete everything and until I get an another attachment I discover only the pictures I see on my harddrive of the recorded files but if I download one from an email I receive a series of other photos running in the Viewer. How to stop it or fix it? Any help is appcrecited. I deleted pictures ran scans defraged dumped cookies and I still get this attached photo stream if I download an attachment pice emil. Thank you.
The photos you see are in your Temporary Internet Files folder and they
accumulate as a result of surfing the net. There is no way to prevent the files from
accumulate, but the best remedy is to empty the Temporary Internet Files folder
frequently. I have delete my temporary Internet files several times a day because he
improves the performance of my computer.(260897) how to remove the content of the
Folder Temporary Internet Files
http://support.Microsoft.com/?kbid=260897 -
When I try to view an XPS document, the viewer opens a blank document page and continues to open the pages of an additional blank document.
Thanks Vijay.
I think I found my problem. Google Chrome seems to interfere with the XPS Viewer. I uninstalled Chrome and the problem seems to be resolved. Again, I can view XPS documents.
Mike
-
computer - cannot change to Classic view problems
original title: computer problems
Hi my computer is going crazy all of a sudden that my Start menu seems to have changed to Classic view by its self. Then when I tried to change back to normal look, he's not here. I keep all of my updates to day and stay away from websites that are harmful. I have vista and IE8. Also my norton virus alerts have been telling me that a recent attack has been blocked, explore more than normal even if the internet is off. Have I been hacked or infected by a virus I don't know please help to about.
Hi my computer is going crazy all of a sudden that my Start menu seems to have changed to Classic view by its self. Then when I tried to change back to normal look, he's not here. I keep all of my updates to day and stay away from websites that are harmful. I have vista and IE8. Also my norton virus alerts have been telling me that a recent attack has been blocked, explore more than normal even if the internet is off. Have I been hacked or infected by a virus I don't know please help to about.
RE: Start menu seems to have changed to Classic view
Right click on the Start button > properties > click Start tab Menu > click on the dot to Start Menu > you should see a blue dot on the front now. Yes?
Click OK when finished.RE: possible virus attack.
I think that your Norton had done his job.
But, if you want additional coverage, suggest you download and install malwarebytes.http://en.kioskea.NET/Download/Download-105-Malwarebytes-anti-malware
Once installed, open malwarebytes > it will prompt you to update. Click Yes and let it update. If it's not hum update you, click Update and make an update > click Scan > click perform complete scan > it will take a while > it will give you a report summary at the end.
-
HP dv6-2150us + Windows 7 64 bits + quick launch problem
I have a new install of WIndows 7 64 bit on my HP dv6-2150us, and now there is a problem with the Quiclaunch buttons. Before my reformatting to get a clean install of windows 7, the quick launch buttons has worked, after the installation of the new, I have a problem. The problem is that pressing the volume buttons or button mute are not any notification on the screen. I can adjust the volume from the keys, but no statement is displayed (I need to check the volume slider in the bar of tasks to see how I increased or decreased it). Mute works also but still no notification.
I installed all necessary drivers and the problem does not reolved. I wonder if windows 7 is somehow blocking notifications or if it's a problem with the application of buttons?
Install 3RVX,
-
Dream Weaver cc Design view problems why is completely different design of the live display view
Why Why oh why oh why is the cc Design view completely different from live view - live mode view is good, but virtually nothing is editable. How the hell can Adobe market a web as wysiwyg design tool when design mode is terrible. I saw old messages regarding this versions in 2014 and 2015.
I'm not completely illiterate code but I would change the drawings etc. without digging deeper into the code. It's 2016 I stopped using the ages of tables there are available to my creations, but it seems that all cram into a table is the only way to get a half-decent idea of what is happening in design mode. I use a Mac which probably didn't help, but in the interest of the essential may be easier not more difficult.
If it is true that Dreamweaver is really only for kernel developers hard, they should say so and start promoting Muse or similar for people who don't want to spend hours crafting code in all the different possible options such java php etc to produce a well-designed functional Web site.
Does anyone know if there is a solution to this
Design view has always been horrible to show you the design of the site, but some things worse.
It does not run scripts of any type and more advanced css is completely invisible to the it. Code errors will also break Design mode almost instantly. Make sure you're validating your code under file > validate > validate the current document (W3C) or going directly to the validator online at http://validateo.w3.org/nu. Pay close attention to any structural errors listed are those that make the Design view go nuts.
For what it's worth, DW is not really a wysiwyg program in the strictest sense of the acronym, regardless of how many guys at Adobe marketing wanted to believe this claim. DW requires a solid knowledge of html, css and javascript to get the best out there for static sites. These days, we use floats CSS, margin, padding and display properties to build our page layouts. While the program comes with base layouts, you can click to start with, do not understand the desire of "why it works" quickly cause massive frustration levels.
If you really don't want you your hands dirty with the code, or simply do not have the time to become familiar with the basics of html and css, Adobe Muse would probably be a better option for you.
Here are some links that will help you to understand its relationship to format html and css, and I hope that allow you to make more sense to DW:
-
Loading new software via the quick installation problems
I bought 2 programs to load on my Z22, the first load without problem, using a quick installation. The second cannot be loaded.
I move the. Install files of people's Republic of CHINA in Rapid and then sync, it freezes, the cancellation does not work and ultimately (after about 45 minutes), I rebooted the Plam and stopped the application on the PC.
I moved the. CPP on and it syncs successfully, then put it back and the same thing happens.
On the Z22, I notice an installer of SM, and if I click on it I get a launch error "the application cannot be started due to a system error"
The program is Solitaire Mania
Can anyone help?
Hello!
Deleted that app install SM of the PDA and try reinstalling Solitaire Mania again via Quick Install. Also make sure you have 5 MB of free space on your device.
Message is about: Treo 650 (unlocked GSM)
Maybe you are looking for
-
My connection password is often not recognized, and I need to change to get it working again. I know it's just because I write it. I was told is a question of Mac OS X. I have a Mac OS X El Capitan 10.11.6. Thanks in advance!
-
Get error message: C00D11B0 during playback of DVD video.
Original title:-Error Message: C00D11B0 played successfully Adam & Eve DVD videos. Now the above error message keeps coming up. Why can I not play these videos now?
-
Original title: trying to uninstalled McAfee Security Center provided by AOL. When you attempt to uninstall the program I get the message "you don't have sufficient access to remove this program. See your system administrator. I'm listed as the admin
-
Windows 7 start menu search can't find any files.
Hello Start menu search does produce all files. The only results it shows are programs and Control Panel options. Essential, the search does not find the word, text, excel or pdf. I tried all of the obvious solutions that includes, by adjusting the i
-
Are these two compatible?