Quicken was not able to start because the side by side Configuration is incorrect

Similar Questions

• eBay Turbo Lister was not able to start because its side-by-side configuration is incorrect

  I downloaded the eBay turbo Lister sale program... trying to open it, I get the following error message... "The application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. "technical support eBay said it happens from time to time and it's a windows problem

  Hi Arglen,

  The machine is missing the correct C++ runtime components for your system type. (x 86 or x 64).

  You try to install the latest Microsoft Visual C++ Redistributable package and check the issue. First of all, you can see this.

  For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)

  For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)

• Message when you try to print "AcroRD32.exe impossible to locate the"..." "Componet app was not able to start because"DLBAGF. "DLL"

  I am trying to print a document and I get this message "AcroRD32.exe Unable to locate component"... "app was not able to start because"DLBAGF. " DLL' not found... Reinstall the application can solve problem... can you me please help... Thank you

  Moved from feedback

  Original title: my problem is with Microsoft Adobe...

  No problem.

  This link can be a good start for you.

  http://forums.Adobe.com/message/4957379

  Good luck with the resolution of the problem.

• 6200 pro sff: hp compaq 6200 pro sff was not able to start, but the fan will operate at excessive speed

  PC shuts off during the night. Haven't turned on this morning, white screen, no boot fan, cpu and power begins to operate at high speed after about 60 seconds. No beeps or flashing power light. Substituted know good power supply, same result. Removed RAM, no beeps from the bios of this.

  Hello

  Try to start without CPU.

  If the problem persists, no beeps, you will need to replace the system board.

  If it beeps (3) without CPU, you will need to replace the motherboard and test the CPU on another unit.

  Computer science is not an exact science , the most obvious is that it's only the system board but if you test the CPU you will be 100% safe.

  Concerning

• Help and Support was not able to start

  When I open help and Support Windows, it shows me the following error message:

  "Help and Support was not able to start
  For more information, contact your system
  administrator or visit
  http://windowshelp.Microsoft.com.
  
  
  (I'm the system administrator only)
  I am facing this problem for more than a year.
  System details:
  
  
  Windows Vista Edition Home Premium SP2 32-bit
  Internet Explorer version 9

  Hi Aditya,

  This could be caused by the virus or corrupted system files on the computer.

  Follow the following troubleshooting methods:

  Method 1:

  Download Microsoft Safety Scanner, then scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note:  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  Method 2:

  Run System File Check to fix the corrupted system files and then check how it works.

  See the link "How to use the file system tool Checker to troubleshoot system missing or damaged files on Windows Vista or Windows 7" to run the System File Check.

  Note: It can ask the Windows DVD difficulty and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  If the problem persists, please answer. We would be happy to help you.

• Recently, I got the following virus. Win32/Sirefef.DAtrojan, I was not able to connect to the internet since then.

  Original title: Win32/Sirefef.DAtrojan

  Recently, I got the following virus. Win32/Sirefef.DAtrojan

  I was not able to connect to the internet since then.
  Y at - there someone who can help me with the connection to the internet?
  I have a Dell XPS600
  Microsoft XP Professional

  Hello

   
  1. what happens when you try to connect to the internet?
  2 - is confined to the browser Internet Explorer problem?
   
   
  I suggest you perform a full scan of the system.
  Here is a link that will give you know how
   
  Perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  «WINDOWS 7 error the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.»

  This cams almost for all the applications that I try to open. I read all kinds of things to solve problems, but I can't install anything because it is constantly on the screen.

  I think it's like that because my computer shuts off when I was doing the system restore, because he has not started.

  I don't know what to do.

  Hello

   
  You can view the event log by using Event Viewer. See the link below for more information about how to use Event Viewer to check the error message or information,
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Please check the information in Event Viewer and let us know the problem more briefly for a better solution.
   
  
  Method 1:
  However, try the SFC (System File Checker) scan on the computer. Check out the following link to do the same thing:
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 2:
  You try to run the fixit given in the following link and check if it works:
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

   

  Method 3:

  You have recently updated with Microsoft Visual C++?

  http://social.technet.Microsoft.com/forums/en/itprovistaact/thread/5491a46a-57f4-444D-a1fd-2600fa6d587e

  I hope this helps!

• Application has failed to start because the side by side configuration is incorrect

  I get "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" whenever I try to open Microsoft Flight Simulator. What can be done to fix this?

  Check THIS link-

  If these C++ installations do not help you may need another version.
  I have 16 different C++ Redistributable on my machine, starting with six of ' 05.
  Don't know if they are all necessary. Various software was installed.

  If you have a 64 bit OS, you get X 86 and 64-bit versions.

  .

• Application has failed to start because the side-by-side configuration is incorrect in Windows Live Messenger

  Recently, my laptop has problems. My user profile cannot be loaded and even when I do another profile most of my downloaded programs is a party. But anyway, it's a different matter.

  Windows Live Messenger worked great after all this. I connected and everything was fine. But then Windows wanted an update.

  Microsoft 2011 or something like that. At halfway through the installation of the blue screen of death came. My laptop turned on fine after that, but... Windows Live Messenger has come up with the error

  Application has failed to start because the side by side configuration is incorrect

  I tried to reinstall several times. The removal of all that is on the new Windows 2011. But no no no avail. I have now no other software in the package here. But the program for Windows Live Messenger file was still there. I deleted it. Installed Windows Live Messenger again but got the same error.

  Anyone know what is happening?

  Hello

  I suggest that you post your question on the Forums of Windows Live for a better answer to this question. This is a dedicated forum for issues related to Windows Live Messenger

  http://social.answers.Microsoft.com/forums/en-us/category/windowslive

  You can also follow the troubleshooting below:

  http://support.Microsoft.com/kb/940065

  Hope the helps of information. Please post back and we do know.

• "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  I have QQ (an international chat program) installed on the laptop. Then my hard drive crashed. Now when I try to reinstall it on my new hard drive I get the following message:

  "Error: the application failed to start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for details" -how can I solve this problem? I have Windows 7.

  Hello

  Thanks for choosing Microsoft Community to post your question.

  It seems that you can not install application QQ, you get an error: "the application could not start because the side by side configuration is incorrect, please see the application event log or use the command-line sxstrace.exe for more details.

  We're here to help and guide you in the right direction. This problem could be caused when the computer is missing the correct C++ run time for your type of system components. (x 86 or x 64).

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: we will install Microsoft Visual C++ for your computer package.

  Note: If you use the 32-bit operating system, download and install 32-bit edition(X86).

  If you use the 64-bit operating system, download and install edition(X64) 64-bit.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86)
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2&displaylang=en

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd512d9e-43c8-4655-81bf-9350143d5867

  Method 2: Run the fixit available at the following link.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Also, check the event log using Event Viewer.

  Please see the link below for more information on how to use Event Viewer to check the error message or information,

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• None of my troubleshooting services work "an unexpected error has occurred and the convenience store was not able to start.

  I can't use the convenience stores in the Panel and trouble getting my printer to re - install, when I click on devices and printers in Control Panel, rather than load him immediately, a green bar moves along the top where devices and printers are, but you can click on the choice and it will load If I go in safety in the Panel and choose troubleshoot, I get the error message, an error is produced so that download troubleshooting, or an unexpected error has occurred, the Troubleshooting Wizard can not continue. When I tried to access microsoft fix - it, I get the error message, troubleshooting cannot continue because there is an error, runtime error, code: 80040402, also 0x800B010E error codes. I am running windows 7 service pack 1 on Dell Inspiron laptop. I'm pulling my hair out! Help, please!

  Hello

  1 did you changes to the computer before the show?

  2. which antivirus is installed on the computer?

  I suggest you follow these methods and check.

  Method 1: Perform clean boot using the suggestions mentioned in the below mentioned link.

  http://support.Microsoft.com/kb/929135

  NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: Run the tool (SFC.exe) System File Checker and check.

  Follow the shape of measures the following link: http://support.Microsoft.com/kb/929833

  See also this link to resolve script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Method 3: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  If the method above does not work, proceed to the next method.

  Method 4: Check the functionality in another user account.

  If it works in a different user account, then the user account is damaged.

  Create a new user account, copy files to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps!

• Rundll32 was not able to load and the program was closed. Can't find anyway to fix my computer

  A lot of problems with Vista and Microsoft. Cannot find repair tools. Rundll32 won't charge or load inefficient and closed its doors.

  Hello
   
  We would like to get more information on this issue.

  1. do you get this error in the system startup or throwing or using any program?
  2. have you made changes on the computer recently?
  3. What is the full error message?
   
  "Rundll32 could not load and the program was closed," according to this error message, we assume that this error is related to a program. If you are aware of this program that calls this error message, uninstall and reinstall to fix this.

  If you do not know which program is causing the problem, follow all the steps mentioned in this link to find the culprit that is causing this problem and uninstall it.
  http://support.Microsoft.com/kb/929135
   
  NOTE: Follow step 7: reset the computer to start as usual.
   
  Post back with the results, so that we can better help you.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• VCSA 6.0 was not able to start services

  Hello world

  I just installed VCSA 6.0 on my environment after the first start, I got this error on the home screen «"" cannot start service.» Firstboot error. »

  and I can ping but I can not connect via web browser, I thought that some early dosent services but I don't know how I can check it out?

  which tool is most useful? PuTTY or PowerCLI?

  You can use putty to go through the logs of firstboot. If possible, please provide the firstboot logs...

• application could not be started because the side-by-side configuration is incorrect

  I get that when I run windows live messnger

  Help!

  Hello gurgeet3,

  Thank you for using the Microsoft Windows Vista Forums.

  Sorry, you have a problem with that.  How long have you had this problem with Windows Live Messenger?  Did you change your operating system before this problem?  Is updated your Live Messenger?

  I suggest go to the link below for support with Windows Live Messenger.  You get with the above message error codes?

  Please let us know status.  Thank you!

  Windows Live Messenger
  http://Messenger-support.spaces.live.com/ Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.