Quiz questions provide no selectable response in HTML5 publish

Similar Questions

• CP5: Rating and Quiz result slides for selected Questions

  Hello world

  I am trying to create a course that has several "knowledge checks" that need not be striped or track, then a 10 question at the end quiz that must be marked and tracked.

  Someone does know of a way to separate these two elements so that the slide Quiz results do not cover my data 'check knowledge' and gives just the details of the user of the 10 question quiz? I would also use the progress bar, but only for the last 10 questions.

  Moreover, if the result of the quiz screen separated the results of controls knowledge quiz, which would work as well.

  Thank you
  Graham

  Hello

  If you are using the Question slides that come with Captivate, all slides will be added to the total score because you can have than a Quiz in a CP-file.

  Some ideas: you can assign to the partition of the first (not to follow) slides to 0, or if possible change issues marked the investigation (no is not marked).

  If by progress, you mean the indication ' Question X of Y ", there, you'll need to do your own counters, with variables user and advanced actions. If you want to have total control of your question slides, that you can create the first group issues yourself and use only default to the last real Quiz Question slides. Just published a blog post today with a few links to articles on customizing quizzes. Feel free to check it out:

  Customize your Quiz using advanced actions

  Lilybiri

• multiple choice with partial credit question, I have 10 responses only 6 are correct.  How to assign 10 points for each of the six correct answers for a total of 60 points setting?

  How can I assign partial credit so that for each possible answer 6 out of 10 each correct answer gets 10 points each, with a possible total score of 60 points quiz?

  To Captivate 7, please go to the Quizzing workspace. You will have the properties and properties Quiz Panel visible. I will now repeat the workflow, I explained briefly for CP7:

  • Check the partial score in the Quiz properties and also multiple responses.
  • Indicate the correct answers on the stage
  • Select the first correct answer on the stage text caption and indicate its score (10pts) in the properties panel, not in the Quiz properties!
  • Repeat the same for each correct answer
  • Check the total score in the properties of the Quiz Panel: should now be 60pts to the full question.

  None of the quiz system variables can be changed, they are read-only. System variables in Captivate 6 - Captivate blog explains the system variables for 6 categories, there are a few changes in 7: new features of Captivate 7.01 - Captivate blog but the Quiz category is always read-only.

• Excluding the review quiz questions on

  Hello

  I have a path with a quiz at the end. However, in the course itself, I have a few interactions that were better managed (I thought) in the form of the Question pages. They provide feedback and try again, and I defined them as cash for 0 points and I unchecked "report responses.

  When the student has completed the end of course quiz, I wish they were able to review their answers on the quiz questions (no change). I don't want this review, including the questions that appear, with comments, in the body of the course.

  Is it possible to exclude these questions from the quiz test?

  Hello again,

  I didn't say 'hide', but 'Skip '.

  What is a linear project? I mean, are the 'real' as issues after the interactions which are not marked but when visited in review mode? In this case, a tip action triggered at the entrance to the first slide 'interaction' will do. There must be a conditional action, something like this:

  IF cpInReviewMode is equal to 1

  Jump to the Question1 Question1 corresponding to the first real Question slide

  Continue

  ON THE OTHER

  Continue

  Not so complicated, right?

  Lilybiri

• Questions and the Quiz Question box misalignment Cap 7

  I work in the latest version of Captivate 7.0.1) subscription version and added a question true/false quiz at the course. The inserted question aligns the selection 'box' (circle) correctly for the first response, but not for the second. This is true for the multiple choice questions as well.

  The master looks very good, there is no extra space in the text of the question (it occurs without the addition of content), there is no way to close the gap of space. If I move the text, the misaligned selection box moves with it and keeps the difference.

  I imported a question of another master, and it works very well, so I have a workaround, but I would like an answer to what is the cause, so I don't inadvertently re-create the problem if it's my fault. And if it's a bug, then Adobe should jump on this one.

  Images - example misaligned

  

  and aligned example imported from another master

  

  Uncheck the Auto size legends in Preferences > by default.

  Anthony

• Quiz question buttons don't 'deselect' when you click off of (see photo)

  Quiz question buttons don't 'deselect' when you click off of my multiple choice quiz (always view as in a selected state, even when I click on a choice). I have feedback works, but the button (I used the buttons-sample group of three) and copied an additional. I use InDesign version 11 on a Windows 7 machine and export to PDF. All other features buttons / interactive seem to work great.

  

  To be clear, you have box behavior (more than one may be selected), when you want to the behavior of the Button Radio (alone in the game can be selected at one time by selecting another unselects the first).

  To get the option button behavior, in Acrobat, rename fields and give them all the exact same name:

  

  Then differentiate them using the Options > Radio button choice property:

  

  Here's how the game will look in domain:

  

• Quiz questions answered not considered

  Hello

  I created a quiz of multiple choice with a few questions, but as I have preview (in a browser and in the section overview of the Cp project), or publish and read (same site), the answers I get are not considered, every time I get the message "You did not answer this question completely" when I go through the quiz after the score. The right question is properly selected on each slide, when I click on the circle to the left of the right question.

  Thank you for your help

  Manual

  Thank you very much for your help.

• Total Questions & precision field only appears in HTML5 after CP6 CP7 conversion

  I can't get these fields to display more HTML5 on the Quiz summary page after converting my CP6 CP7 project file; only the correct Questions box.  If I publish in Flash, it displays fine, but it does not appear in HTML5.  If I take the original file in CP6 and publish on HTML5, the areas in question display very well, so it leads me to believe that something is not correctly convert the CP6 CP7 when HTML5 is involved.

  I tried to uncheck the fields in the Properties tab of Quiz and "Reset Master Slide" to try and refresh the page summary Quiz, but still not go.  I would like to delete the page of summary Quiz completely and rebuild from scratch, but this is not possible because it is related to the Quiz questions in the project.

  Any help would be appreciated.

  UPDATE: if I invade questions Quiz on the temporary project and then delete the page summary, add new and then put the Quiz questions, now displays the Total of issues, but precision field still don't.

  You can always create a custom partition slide, using the system variable quiz and hide the default scoring slide.

  System variables in Captivate 6 - Captivate blog

  Intermediate Score slides - Captivate blog

  Lilybiri

• Captivate 7 - Quiz questions take a long time to advance to the next

  So I have completed my course. All along (each slides or so) I quiz questions that are classified but undeclared. They are simply there to prepare the student for the final exam. They have the opportunity to submit the response followed legends correct and incorrect. At the end of the course, the trainee meeting these same issues (55 in total), but now they are back to back and they are both classified and reported. Here, they have only the option to submit.

  When they take undeclared quiz questions, click on submit and it quickly goes to the next slide, because it is set up to do. BUT on issues that are noticed and reported, when they click on submit, it really takes a lot of time to move to the next slide (and a lot of time, I mean 10 more seconds). At the end of the review, when they answered the final question, and click to go on, the two final slides take more time (sometimes up to a minute) to move forward.

  I understand it is going to be some delay while the system reports the score for each slide, but this seems abnormally long. This shift occurs in preview mode, scormcloud and during a test on a LMS (Gyrus) client.

  Any idea on why this is and how to prevent it. It's really hard to ask my customers to be patient and stay there for 10 seconds every single issue. I need them to take the final exam at their own pace - fast or slow.

  Thanks in advance,

  Arthur

  I know, it is barely visible, because the line between the inactive and the Active part is black on a blue background (already invited for 6 or 5.5 to change that color...) You will need to go over it all in the middle of the timeline until you see the line double cursor appearing and you can put:

  

  Go to the next slide makes them faster. I had no problem with our LMS, but read on this forum (you know that I am often here) that some have done so. No rule of the world, by dragging the break more towards the end has almost the same effect, but you can leave a little bit more time (less than the 1.5secs).

  As I know there is no way to change the sleep time by default for Question slides, as the timing is never available on Quiz Master slides.

• First Quiz question is ignored during the second attempt.

  Hi all

  I have this weird problem with a quiz.

  Situation

  With Captivate 6.1, I have a Question of pool with 5 questions. The issues are all 1.7 sec on the timeline with the standard pauzé at 1.5. No feedback is given, all buttons are disabled except the submit button.

  In the project, I have 5 random slides, related to the question of the questions pool.

  The quiz settings: 80% for spend, infinite attempts.

  Question

  When I start the second or third try of the quiz, the first question is shown, but after a second or two, publication (SWF and SWF-SCORM) continues to the second question.

  It has not resolved

  These things I tried:

  1. Reissue with "Force republish all slides" selected.
  2. Removing all the Question slides in the project and recreate them from scratch.

  Can someone help me with this?

  Best regards

  Dieter

  I have heard some evidence that you should never set quiz question slides less than 3 seconds in length.

  Try to make all the quiz questions about 3 seconds with the break point to 1.5 seconds and see if it improves the problem.

  Another request: do you have removed or replaced one of the elements by default question slide as the legend of the Question title or caption of the Question text? If so, which can also cause behaviors glitch.  You will need to delete questions that you have changed this way and replace them with quiz question slides.

• Captivate 5.5 prohibited for different types of a quiz question slides to work properly?

  Captivate 5.5 prohibited for different types of a quiz question slides to work properly?

  I have a quiz that includes multiple choice questions, multiple choice with several answers, sequencing, and short answer questions. I was told in an online conversation that I had to use a default template to Captivate with a type of question only for captivate slide works correctly. The Adobe representative remotely considering my record, and discovered that the quiz button is not connected to any action, even if I created it a slide of questionnaire.

  

  Online chat:

  Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 4 minute (s), and 0 second (s) or more because there is 1 client (s) online in front of you.

  You are now chatting with 'Lea '.

  Leah: Hello. Welcome to Adobe Technical Support.

  Leah: I received your request. I would like to please a moment to check your account and review the details of your

  request.

  Leah: Please choose the option, the infinite attempts

  David Lee: Yes, I had endless attempts checked. It still does not work.

  Léa : Each question must have infinite attempts

  David Lee: Yes, I welcomed the infinite attempts in quiz preferences, as well as with respect to each question. This particular slide is a question multiple choice with multiple correct answers. The infinite button is checked. The slide informs the user to try again, but the back and the clear button do not work, the termination of the project and the user did not click the new button.

  Léa : I may have remote desktop connection help you?.

  David Lee: Yes, thank you. How do I facilitate this?

  Léa : http://my.adobeconnect.com/khyati/

  Léa : Enter as a guest

  David Lee: I'm in

  Léa : Share my screen

  Léa : Desktop

  Léa : Please show me what slide we discuss on

  David Lee: We discuss slide 18

  David Lee: The current slide

  Lea: I would like to see the result

  Léa : Tiffany is a Captivate model?

  David Lee: No, I did this. The other tab you see is called ClarkTemplate, but this isn't a model of captivate. I called model as is the format for the entire project.

  Léa : Unfortunately there is no action not implemented responses to check and also that is not a default captivate quiz, I can't support this.

  David Lee: Why is there no action on response to tick? It's a quiz slide

  Leah: The model of clark is not a default template of Captivate.

  David Lee: I'm supposed to use a default template of captivate?

  Leah: Yes if you want to

  David Lee: And it would work then?

  Léa : He could.

  David Lee: How to create a default template of captivate?

  Léa : They want a multiple response quiz?

  Léa : If so, please create a quiz, and you can create the quiz with the help of the help file.

  David Lee: Yes, but it should also include short answers and sequencing. Am I limited to a type of question in a quiz for captivate 5.5 working properly?

  Léa : Yes

  David Lee: Thank you for your time.

  Léa : Welcome

  Léa : I closed the meeting

  Léa : Please contact Adobe. Good bye.

  Friendly format for this question slide!  Very cool.

  One thing I want to suggest you check if you meet problems with question slides, but you have not accidentally deleted default captions that are on the slide when Captivate adds to your quiz.  For example if you have deleted or replaced the title of the question (the one that tells you that it is a true/false or multiple choice) or legends question text (the one that allows you to enter the question to which the user is supposed to reply), then you can expect to have strange problems arise.

  Usually, I suggest to users that they're trying to click the little eye icon on the timeline for the quiz question so that it hides all the objects on the slide.  This icon SHOULD NOT overshadow the default Captivate captions or buttons.  He must hide captions or the items that you added to the slide when it was inserted.  If you click on this icon and you see the title of the issue or question text captions disappear, then you are snookered and need to rebuild this quiz with a new question.  You can not re - insert these specialized legends once you've deleted.  They come with question slides.  Most users of Captivate are blissfully unaware that these legends of importance both for the proper functioning of the quiz.

  One last thing: some of your symptoms suggest that you have the Quiz settings > required options set too tight.  Make sure that the drop is set to optional for the highest degree of flexibility.

• How do I integrate form filling as a quiz question?

  I have a class in which one of the modules is an exercise at the end of a procedure from start to finish using a case study and correctly entered information in a form. How can I activate every step of filling of the form in a quiz question? None of quiz question types seem to fit this scenario. Any help would be greatly appreciated.

  Will submit the validation wgich you want I think that given that you add launch

  scores of the ETB. You can replace the keyboard shortcut button.

• How can I import an Excel quiz questions?

  I have lots of quiz questions to import - is it possible that I can import from an excel file or similar?

  Thank you.

  Hello

  Sorry, but the quiz import option is available only when you import from an existing project in PowerPoint with a presenter quiz.

  For more details on importing of quiz, please visit - https://helpx.adobe.com/presenter/using/adding-quizzes-questions.html#importing_questions _ from_existing_quizzes

  Please mark this answer as correct if you find it useful.

  Let me know if you need additional assistance.

  Thank you

  Zeeshan Hussain

  Adobe Presenter Engineering Team

• change the number of quiz questions in game

  I searched and searched the preferences, but can't find where to change the number of quiz questions in the race game treasure, available to active elearingbrothers.

  Thank you.

  They have tutorials on their Web site I've used in the past and have found it very useful.  I have used this model of game and if I remember correctly, it's in the menu variables.   Give it a try.

• Quiz questions together Not Report - can't change

  I built a quiz using CP quiz slides - nothing personal. I saw all my quiz settings and from what I see he should report, but my results are always 0. When I look at the tab Advanced Interaction, each question is set to 0 points and the report answers column has NO for each question. I can not find how to fix these settings and am puzzled. I've built enough Quiz to find out that there is probably a box buried somewhere I did not check.

  I chose to LMS, but this isn't my problem. I can't even score for display during the test.

  I have a few questions on the quiz settings well. Why not quiz questions by default at least 1 point per question? Why no communication for the project 'activate' triggers 'Report answers' setting that I will try to find?

  I have included a few sample images. One has been truncated.

  

  

  It is not a normal questionnaire slide it's a blade to check knowledge. If you want a scored Quiz blade, use the Quiz option, instead of Quiz Question slide, check the knowledge of slide.