Quiz slide - do 'start over' and the 'success' legends audio playback

Similar Questions

• Start over and the envy of many do things

  Hello all,.

  I have read all the threads, take notes and try to learn better that I can, and I hope for a little more help.  I'm a big fan of small video projects.  I'm a dad and I really enjoy making short films with the kids and try my best how to make some neat effects.  It was fun for me and a great way for me to do something with the kids.  I use Photoshop, Premiere Elements and want to add aftereffects in the mixture.

  
  So, here is my problem (I think) I have a Sony Handycam DCR-DVD105.  It uses DVDs for media.  I'm gathering that this is probably my problem.  It seems that when I have the camera on a tripod and a constant background that it is good enough... but when I move the camera around I'm getting the jiteryness and the blockyness in the video.  I thought maybe would it be horses of PC, but a new PC and read a little later I think it's actually my camcorder directs.  If I'm reading things that I'm guessing that I care that I am compression and decompression of video.  My current technique has been to simply copy the DVD VOB files and referencing as media in first.  I could then make clips and assemble the scenes.  Reading some comments leads me to believe that I could have more success using first Streamclip or something like that to make the VOB file in a DV AVI.  It sounds as if I don't have that things might improve.  However, my birthday is coming and I'm not difference of upgrade to a better camera.  I guess my question is, are people out there using handhelds short videos first and have a successful (and if so, is this a problem of process) or I'm really just better done to have a new camcorder for all my projects?  If it is later, any suggestions?  Ill admit, I was a little disappointed to read properly, I should switch to strip (all these cool new HD cams with HD looked so easy), but I would really like to do the things this time and have the right tools to do the job.

  Thanks in advance for any advice.

  I have a Sony Handycam DCR-DVD105.  It uses DVDs for media.  I'm gathering that this is probably my problem.  It seems that when I have the camera on a tripod and a constant background that it is good enough... but when I move the camera around I'm getting the jiteryness and the blockyness in the video.

  With a DVD recording camera, you will have compressed your film at first. Movement problems often date from this initial compression. Quality, especially with cameras and subjects, will suffer and there is nothing that can be done on this loss. Get this material to change smoothly is part of the problem, and conversion will help- but not with regard to the quality of the images, as the compression will always be the largest item to deal with.

  I thought maybe would it be horses of PC, but a new PC and read a little later I think it's actually my camcorder directs.

  Power of the computer is not the initial problem, but can play an important role in the future, if you go with an AVCHD camera. This material is quite good, but requires much more processing capabilities.

  Unfortunately, the only HD material easily edited with the new cameras will be MPEG Intra-frame and newer cameras using images that are very expensive and only PrPro CS4.2 (about to be released) will fully manage it. Maybe the 9 PrE (not even speaking much yet) will also be able to handle this.

  Currently, AVCHD seems to be the way forward for HD material, but at the expense of a big computer. Output of BD (Blu - ray Disc) will also produce the best resutls, but you must consider the public what equipment his could not have - no reader of comics, and there is a problem.

  I was a little disappointed to read properly, I should switch to strip (all these cool new HD cams with HD looked so easy), but I would really like to do the things this time and have the right tools to do the job.

  The running base NLE is tape still. There are tons of various other programs available, but this material is not really meant to be edited, just looked. Flash media record improves, but still traps - computing power is one of those for the AVCHD material.

  I wish it had a 'one-size-fits-all' solution out there. Maybe in the near future, as some high mfgr of range. the Intra-frame HD formats and NLE programs are rewritten to take full advantage of them. At present, the expenditure (cameras and NLE) remains very high, but we all know that prices will come down, because several companies offer the new format/CODEC, and software is designed to serve.

  I'm still a fan of the band, but the next generation formats and Flash memory could well change that.

  Good luck

  Hunt

  PS - Welcome to the forum.

• How to move the "blue bar" with the start option and the clock and icons of a vertical__position on the left side of the screen to the bottom of the screen... has this before happen__once, can't remember what to do.

  How can I move the 'blue bar' with the start option and the clock and icons on the left side of the screen to the bottom of the screen.  It's happened before and I forgot how to move.

  Hello pookprec

  Here's how to do it

  .

• The Start button and the taskbar on my computer has changed and I don't know how to get back to its original look, I have windows vista

  The Start button and the taskbar on my computer has changed and I don't know what to do to get back to its original state. I have windows Vista

  Hello

  Have you changed the desktop theme?

  Change windows to Classic view

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-to-Classic-view

  Refer: Change Desktop Theme

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Why are some Visual elements will automatically turn off?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-are-some-Visual-elements-being-automatically-turned-off

  Thank you

• the Start button and the taskbar disappeared in windows vista

  Original title: start button

  the Start button and the taskbar disappeared in wondows vista.

  It's ok in the profiles of other users.

  Hi GavinAlston,

  ·         Since when are you facing this problem?

  ·         You did it last changes before the show?

  ·         Are you able to see the desktop icons?

  Step 1: I suggest that you put your computer in safe mode and check if it helps.

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you are able to run safe mode then try to clean boot.

  Step 2: I recommend you perform the clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Office restarts itself when it is stopped with the start menu and the power button.

  Original title: stop problem

  My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

  Hello

  1. Press (Windows key) + R and type "regedit" and press enter.

  Find the following key:

  Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. double-click on "PowerdownAfterShutdown.

  Then,
  Change it to '0' if it is '1' OR
  Change it to '1' if it is '0 '.

  And press ENTER.

  Then reboot andtry to stop.

  If this does not work, make sure that you change the value in regedit back to what she was original

  Try this one:

  Put the laptop to sleep then let it restart itself. Then run command prompt and

  Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

• JumpLists disabled; 'store and display of recently opened items in the Start Menu and the taskbar' is greyed out

  My option 'store and display of recently opened items in the Start Menu and the taskbar' is grayed out. Are also grayed out any mention of "jumplists" system (i.e. the number of items to display in the jumplists). Have I inadvertently disabled this feature? If so, how can I return it?

  Hi, landonblaine:

  When the option store and display recently opened items in the start menu and the taskbar is disabled and grayed out, it is a symptom that two Windows fonts are applied to your system.

  Open the Publisher of the registry (Regedit.exe) and navigate to this key: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer. If there is a registry that NoRecentDocsMenu value set to 1, delete it. If there is a registry that NoRecentDocsHistory value set to 1, remove it as well.

  Repeat the same steps in the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer registry key (it cannot exist).

  Restart your computer and see if the problem is resolved. Microsoft MVP Windows Desktop Experience

• Creating a rule entry time custom to read the start time and the stop as entry time

  Hello world
  
  I hope this is the right forum to post this question.
  We are putting in place the time and work package, and we need to write a few rules of the time for this entry.
  
  The first of them is to have a rule that validates the start time and the stop time has entered the entry-level feature Self Service scorecard.
  So, I created a formula to achieve this objective. This formula eventually calls a PL/SQL function that checks for card points, the Start and Stop time values stored in the database.
  
  However, this is not what I intend to achieve. What I have to do is to get the value of time as she walked and apply the Validation
  
  This expansion in a scenario:
  
  1. the employee connects via the Self Service and access the timesheet feature to make a time entry
  2. on August 20, he entered 13:00 as the start time and stop time 20:00
  3. click on the button
  
  When he clicks on the button Save, (assume 20:00 is an incorrect time), an error message should be displayed to the user informing him of this
  
  ----------------
  Now, I have to spend the early hour 13:00 and the 20:00 in the formula stop time so that I can post it.
  This is where I run on issues that I don't know how to get these start and stop within the formula time
  
  Grateful if someone could help with this.
  It's quite urgent given the lead times for completion on that.
  
  Thks in advance folks
  Ravi

  l_timecard_info: = hxc_self_service_time_deposit.get_building_blocks;
  l_building_block_attr_info: = hxc_self_service_time_deposit.get_block_attributes;

  However, I do not understand this:
  If there are no parameters that are passed to these calls, then how the correct score card to be recognizable? I'm assuming that there is something like a Timecard_Id or setting Timecard_Ovn that allows to identify the correct sheet when reading this info.

  Pls advise me on this point, because I'm just not understand this bit.

  You do not need to pass all parameters. The overall picture of pl/sql is filled for the session before the rule of time entry. If you want to restrict, the formula will be an id_ressource of entry which is an employee self-service Person_Id. and compare this value against id_ressource in l_timecard_info.resource_id

  If this isn't an inconvenience for you, I want to understand how these function calls to keep the start time and stop time, and to access these variables, I would need to loop as a table through?

  The l_time_card_info of pl/sql table is filled exactly the same as how is stored in HXC_TIME_BUILDING_BLOCKS when save is saved / submitted. It's just that the pl/sql is here filled.

• CP7 - quiz slides continue to play after the chronology

  I use slides with audio 7 Captivate quiz.

  Audio playback, I choose an answer and click on send, then click on Y to continue, and if I'm right or wrong, the PlayBar is only 1/2 - 2 / 3 way through the slide.  So I have to wait while the blade plays, long after the audio (and blade) ends.

  The results following is hidden, with the option off in the preferences, so the quiz slide is usually the last slide in the project.

  Anyone know what is happening?

  Thanks for any help,

  Marion

  Point of suspension by default for question slides (and score slide) is half of his chronology. This means that, after the two steps, another 1.5 seconds deals must go with the duration of 3 seconds by default timeline.

  Take a look at my explanations and tweaking possibilities:

  http://blog.lilybiri.com/question-question-slides-in-Captivate

  http://blog.lilybiri.com/question-question-slides-part-2

  You can move the suspension point more towards the end, but only with the mouse (there is no Timing accordion). Or you can change the option to continue to 'Go the next page ├a' both for the success or failure.

  BTW, it of nothing new, has always been the case. The messages have been written for previous versions.

  I recommend you add a last slide after the last slide in the question, it should not be the Score slide, certainly if you want to report to a LMS (leave little time to CP)

• My Start button and the taskbar will not drag to their correct positions. Also my clock has position of bud and watch military time

  My Start button has moved to the top left corner and the time display and the bar spots went vertical to the position of the lower left corner. Clock military time.  Unlock the taskbar and try to drag-and - drop failed. Help, please.

  On Wednesday, October 10, 2012 20:16:51 + 0000, Inezbower wrote:

  My Start button has moved to the top left corner and the time display and the bar spots went vertical to the position of the lower left corner. Clock military time.  Unlock the taskbar and try to drag-and - drop failed. Help, please.

  Although by default, the taskbar is displayed on the bottom of the screen,
  It can be on any of the sides on what you prefer. To move any
  side to side, simply click an unused portion and drag
  where you want it. Don't forget to click inside it, not on the edge.
  by clicking on the edge and dragging will resize not move.

  Moreover, with the screen monitors wide today, I prefer the taskbar
  on the left or the right of the screen. I think that allows a better
  use of real estate than have it at the bottom of screen.

  Ken Blake, Microsoft MVP

• The start menu and the task balk disappeared

  On my windows XP the task and menu balk start screen disappeared as a result of a mouse click. "Just the icons on the side right.<" remained.="" what="" should="" i="" do="" to="" get="" the="" balk="" back?="" any="" help="" will="" be="">

  Hi janavasiljev,
   
  This problem can occur for the following reasons:
  • Auto-hide the taskbar has been selected for the taskbar and Start Menu Properties.
  • Your user account settings are corrupt.
  • The core files are damaged.
  • The Explorer.exe file does not load at startup.

  Make sure that the hide option automatically is not selected for the taskbar and Start Menu Properties.

  To determine if the hide option automatically is not enabled for the taskbar and Start Menu properties, follow these steps:

  a. press CTRL + ESC.

  b. If the Start menu is displayed, click on the Start menu and then click Properties.

  c. click on the task bar , clear the Auto-hide the taskbar option and then click OK.

  For more information, see:

  Start menu and taskbar Windows are missing after you upgrade to Windows XP

• my windows vista computer when its loading windows turns black and stops working then starts again and the same thing happens again.

  When I turn on my pc, the system starts the Pentecost a poblem but when windows Vista family premium starts to go the window that allows you to put the password it goes black after a wile it restarts and the same thing happens again.
  safe mode works I have Dome system restore format and reinstall windows and happens again :(

  Hi LGStrike,

  Restore your computer to a point before the updates being installed with the System Restore.  Then proceed as follows:

  1. go in Control Panel , and then select Windows Update.

  2. click on check for updates.

  3. once the results come back, click on the link that shows Important updates and deselect all the updates except the first 3 or almost and install the updates.

  4. Repeat steps 1 through 3 until you receive the error message.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Start Menu and the desktop icons for HP printer Diagnostic tools

  Hello world

  I have a HP Desktop F4440 all-in-one printer and I use the Windows XP operating system. I have all the scanning software and others installed from the original HP installation disk or updates from the HP Web site for this printer. Everything works very well at the moment, but there is a small problem. The HP icon shortcuts for the Menu start-up and functions for the printer changed to a generic icon at a time given to these two places after the software installation CD was used by me to install the printer programs or desktop icon HP to utilities "Diagnostic Tools HP printer" original. It works fine otherwise, when I want to go check something on the Tools of diagnosis HP printer or HP Solution Center, but the HP icon changed to a generic at a time for a reason unknown, inexplicable. I don't have no changes to my system until the problem occurred to my knowledge other casual upgrade for the operating system or install a new windows update or HP software updates or restart the computer, but some schooner point after one of these upgrades, HP put to date or restart the HP start menu and desktop icons time replaced by a generic.

  Can someone tell me how I can recover the original HP icon and get her back Amendment? It was an icon on the web since the HP printer Diagnostics utility or function is based on the web. Is there a way I can save a copy of just the file on my computer icon so that if it goes back to that generic again once I can more easily change what it is supposed to be? I thank very you much for your help and advice.

  Hi there yoseph13,

  What has happened to me too, but after a windows update. Half the icons on my desktop have been affected. I hope that this fix works for you as well. Right-click on the icon. Go to properties. Click Change icon. Select the icon and click ok then apply and ok again. If the icon does not appear, you will need to navigate to the folder of the software and select the application.

  Good luck!

• Fine to start Windows and the computer works correctly for 5-10 minutes and locks up.

  My computer starts well and runs properly for a short period of time, and then it crashes.

  (1) open a by a right-click command prompt and select "run as Administrator".
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  =====================================================================

  (2) run the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• Is it possible to change the start menu and the commands in English?

  I bought a computer (Dell) of France with windows 7 Home premium, with a

  all orders and start menu are in french.
  Is it possible to change the language of the computer (not the language of the keyboard), I mean start menu and commands (copy, paste, new folder...) to the English language?

  I bought a computer (Dell) of France with windows 7 Home premium, with a

  all orders and start menu are in french.

  Is it possible to change the language of the computer (not the language of the keyboard), I mean start menu and commands (copy, paste, new folder...) to the English language?

  Hello

  I'm sorry for the inconvenience, but I have a simple solution for your problem and get back you on track.
  Simply follow the link below and download the US English Language Pack. (Will be downloaded via Windows Update)
  After it is finished, simply apply the update and you should be good to go.
  http://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=Win7
  I hope I was able to solve your problem for you today, if you have any other questions or problems or the problem persists please answer that I am more then happy to help you somehow I can.
  Thanks for your time, I hope this has helped.
  -Ian