Similar Questions

• Portege R100 - audio installation SP3 not working

  I have a R100, and since the installation of SP3, the audio does not work.
  Seems to be a driver problem (Realtek).

  Does anyone have a solution or a source for a new driver?

  CJ

  Have you tried a new Realtek driver?

  Take a look at the Toshiba site. Maybe you can use a pilot a newer model.

• R100 pilot installation order

  Hello

  I seem to have misplaced my recovery cd and I need to re - install XP. I downloaded the latest drivers 30 (!) more or less, but I'm totally lost trying to install them in the correct order. I searched the forum and support R100 with no result documents.
  Can someone please help?

  Hello

  After installing OS install drivers for the components of different materials as the first

  Chip Set Utility
  Display driver
  Audio driver
  Toshiba Software modem
  CardBus driver and so on

  After that, you can install all the tools & utilities Toshiba. Please be careful because the first one must be common Module. And then continue with:
  TOSHIBA Power Saver
  Toshiba Utilities (HW Setup)
  Toshiba Mobile Extension
  Toshiba controls
  Toshiba console
  Toshiba display device

  I hope you are going to install your unit successfully.

  Good luck!

• Windows Installer costs without disc?

  A couple of years ago, I received a (pre-built) computer of PCWorld and as of late I had some fairly large problems involving viruses because of the Oracle publishes a java patched version is riddled with security flaws even more before the patch that they corrected... and now I have the famous zeroaccess rootkit (and not on this computer). The computer being pre-built they failed with windows disk you can do fresh installs unless it was made to measure. I don't see why I should folk £100 + for a new windows disk when I updated to Windows every time there's an update and I have a bit of protection best firewall/AV (2 anti-virus + malwarebytes.

  Don't see how it's fair for me to pay for something when I did everything in my power to protect me even Windows is a virus magnet, do you think I should be forced to pay £100 + when I've already spent £800 on the computer + £120 on my AV protection still Windows decides to always get infected because these updates that are apparently meant to make you more more sure infact done the opposite.

  Hello

  When a company sells you a new computer, they must provide you with a way to reinstall the operating system, either through a recovery Partition, or providing you with a recovery disc to buy time.

  Contact PC World and demand media re-systems

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Problems of access to vCenter 5.5 installation costs

  Hola

  Instalar en mi laboratorio el vCenter 5.5 Acabo (pero todo en 1 server custom installation).

  Al acabar the instalacion y querer arrancar el webclient para conectarme al vCenter (local) me sale el siguiente error:

  Cannot connect to one or more systems of vCenter server: https://xxxxx.xxx:443 / sdk

  NOTE: strangely el xxxxxx.xxx're el del dominio, no el del vcenter server number.

  Tampoco puedo run the following url para try Registrar el vCenter al WebClient: https://localhost:9443 / admin-app , me da el siguiente error

  404 - Page not found

  The next page is not found:

  / admin-App

  For help, contact your network administrator.

  He could see Quebec City in Start > programs > vmware > client vsphere web > vsphere administration aplication no appears

  Alguien ha pasado?

  Saludos

  Hola

  There present find the al problema respond

  In el proceso instalacion del vCenter has the configurar hora con cuenta la arranca el servicio, no muy claro, pero por costumbre is configure the fair account, the password y el FQDN puse el del dominio: NO del servidor donde el is quiere instalar el vCenter.

  

  AHI la Razón of Quebec me saliera in las xxxxx.xxx el del dominio en el error number:

  Cannot connect to one or more systems of vCenter server: https://xxxxx.xxx:443 / sdk

  NOTE: A veces are mejor leer mejor las docking

• Windows 8 crashes after installation costs

  I had some problems with my ProBook 4720 s this summer, and for the most part of it, would not depend on the screen. After I plug it with an external, it would work, but the image was dispersed. Today, on something better to do, I tried once more, and after that I tried to install a new copy of Windows 8 on it, somehow got fine screen. I finished installing and I wanted to update to 8.1 and durig download the screen was still dark and Windows crashed. Here's the minidump (http://sdrv.ms/19tJN7E) so if someone could tell me what the problem is.
  Thank you

  Junuz

  This was connected to an operating system file.  Please run a check of system files to check the system

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  Older drivers who need update

  agrsm64.sys 2008-11-10 10:01:35
  HECIx64.sys 2009-09-17 14:54:16
  Rt630x64.sys 19/10/2011 07:12:55

• FSX doe to not work after installation and activation on xp 64

  • problems with fsx deluxe
  • Windows xp prof 64 bit
  • tried to reinstall software
  • When you click on the shortcut on the office splash screen appears the landscape of loads of objects then disappears
  • did have problems in first installation with activation key after 2nd install called from new activation, installed and active fsx ok code but does not start a short cut
  • should I try a disc format hard costs re - install of xp64 and fsx installation costs

  Hello

  Have you installed any 3^rd party application (aircraft) and/or you are running one of the game Add-ons.

  You can also check if DirectX update allows you to play the game.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en

  Also make sure that all drivers are updated to your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Members of cost center to HFR filtering view

  Is it possible a Hyperion financial report to members in a dimension of installation cost center filter so that users see only in the selection of members POV members that they were put in service access to? I have a cost of more than 1000 centers of cost center dimension, but the POV does not filter members only apply to the access set my end user service. For example, my finance manager sees that all cost center hierarchy, but I want only him to see her a few cost centers. Any suggestions?

  It can be done with an essbase connection, but you must update created filters to change the reading to metaread or duplicate the reading line and make it metaread, not a fun process but it can be achieved.
  I still don't understand why metaread has not been applied in the planning of the filters.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I'm a frustrated newbie trying to download FF 8.0 on my Mac. I get an error message indicating an unknown error has occurred and to record on a disc. Does anyone have a miracle solution? Thank you!

  He also told me that a download file could not be opened. It goes through all the steps to download and I get the message at the end.

  Get installation costs

  • getfirefox.com

  review the Installation Guide

  • https://support.Mozilla.com/en-us/KB/installing%20firefox%20on%20Mac

• Satellite A200 hangs or restarts at any time

  Hello

  I am facing problem with my Toshiba Satellite A200 since last week. The problem, I noticed even is mentioned below in steps:

  1. start & freezes on the screen at any time or logon
  2 restart at any time without any notification as blue screen or any message dumping

  Explanation in detail:

  As I start my laptop it can freeze or restart at any moment after the Startup logo. This has happened several times, I noticed. If it freezes, after waiting for half an hour, if it does not, restart any movement of the mouse, no appeal of taskmgr, etc. it completely freezes. Then I made him stop forcing for example, by pressing the power button / stop for a long time.

  * Things to note here: this happens when the power adapter is connected *.

  Same thing repeated here with AC not plugged (on battery), the system works absolutely perfect until that hard battery backup with permitted load on the processor and any diet Plan. Tested also on AC only (battery does not exist) but same results, no resolution.

  As soon as AC is plugged the laptop is ready to freeze or reboot anytime * and the time varies between instant to max 45 minutes I noticed several times.

  Second thing to note is that if I boot in SafeMode it works absolutely fine with & without plugged AC.

  * Measures taken to resolve: *.

  * High temperature set: *.
  I also cleaned the heatsink fan heat + metal bands filter in front of the FAN to avoid high temperatures, but same results, no resolution.

  * OS Installation costs: *.
  I installed a clean copy of the OS, but no effect not found, same results, no resolution

  * AC adapter power supply check & replacement: *.
  I checked the output of the AC adapter / CC it 19.7V DC no load. I borrowed a new AC adapter with my cousin with the same model, but the same results, no resolution.

  * AC adapter Socket change: *.
  To avoid the bad food, but the same results, no resolution.

  * BIOS: *.
  Settings to change the frequency of the dynamics processor to still weak & 2nd Core Disabled, same results, no resolution.

  After searching a solution on various sites, I tried several ways but without success.

  Finally worked for me is to start in "SafeMode-> Device Manager-> disabled both processors ' & restarted in normal mode, everything works fine.

  * Question: *.
  1 but what is the real fault I want to know who?
  2. How safe to operate with disabled processors?
  3. What is the effect of it on the laptop?
  4. it's the real solution?

  Please give me the real solution.

  Thank you
  Hemant

  Hi mate

  The sounds of history for me really weird I mean disabling processors in Device Manager
  Is this laptop must not freeze and must restart not anytime if that's the case then something must be wrong with the software or hardware.
  Because you installed the OS and the problem is still available, I guess something must be wrong with the material; Perhaps the mother or the CPU itself

  It is difficult to say what could be wrong, but it seems like material is affected

• Problems with Lenovo g500

  Hello

  I've been using Lenovo g500 for about a year now, but last week there was a problem with my laptop and I had to restore windows by using the button restore Lenovo. The windows restore very well and I was able to update Windows 8.1 Although wiped all my data in the C drive.

  But now my laptop does not connect to any bluetooth device. Whenever I go into the settings of laptop, it just says: "looking for bluetooth divide but it never detects my phone or any other bluetooth devide.»

  In addition, since deleted my data, I have to reinstall the drivers for my printer but this laptop does not even recognize the CD! He does not have ANY CD.

  And the Lenovo Veriface doesn't work either now

  I've searched and searched to these questions. I reinstalled the drivers lenovo veriface and bluetooth but they don't always work. And drivers bluetooth never has been removed from my laptop because they were installed in the D drive, but they do not.

  Someone help me please I really need to print some documents, but this laptop will not install my printer drivers.

  Recommend to download Bluetooth Driver (Liteon/Atheros, CyberTan/Broadcom, Realtek) version support 8.0.1.305/12.0.0.7850/3.769.769.091813 and installation costs if possible.

  I recommend installing the chipset and driver. This should update the windows of files needed to remove the yellow warning.

• Errors in Safari by trying to play the YouTube video that has an ad at the beginning

  Having this issue for a while (since Yosemite).  I'm on the last, largest OS X and Safari.  When I visit YouTube and the video has an announcement, Safari will not play video.  I get an error.  If I go to Chrome on this user, he plays very well.  If I go to a test account, Safari it plays very well.  I Reset Safari back to installation costs as possible (trying to solve a problem of WebEx where the Safari doesn't launch WebEx but just turns and turns) and still get this error.

  Does anyone have an idea what is the cause of the issue is, how can I solve it and solve it?  It would be awesome if it also solves the problem of WebEx.  As it is, I spend much more time in Chrome because 'it works' Safari held counts these nagging questions and no real way to solve problems. And Reset Safari receive one together much more complicated with the recent versions when the Reset Safari option has been removed.

  1 force quit Safari.

  Force quit.

  Press command + option + esc together keys at the same time. Wait.

  When the Force Quit window appears, select Safari if not already.

  Press the button to leave the bottom of the window.   Wait.

  Safari stops.

  2. restart Safari by holding down the SHIFT key.

  This will launch Safari mode without failure.

  3 turn off wifi and turn it back on.

  Turn off the Wifi. Click the Wifi icon in the menu bar, then select "Turn off Wifi".

  Visit another website.

  You have no internet connection.

  Turn on Wifi. Click the Wifi icon in the menu bar and select ' turn Wifi on.

  Select your network.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 safari > Preferences > Extensions

  Disable all extensions, restart Safari and test.

• Problem with the Activision game

  Hi Mark
  Thanks a lot for your answer. Sorry, it took a lot of time to get back to you, Windows 7, you do not know ;-)

  Right, I tried both of your suggestions, the first I followed religously, had incorrect switch or waited for bad back prompt [!] I think so. The second went well, but nothing seemed to be the case, no patience, maybe.
  In any case, I bought another 1 Tb HDD [Cheap @ Maplins, UK] and tried to the other installation costs. Guess what? Yes, it is true, he went abso-bloody-Marc soft.
  No problem. Everything is installed, or almost, and it's all working well.
  Thanks again Mark.
  p.s. I don't think you know why everyone including Activision AND Microsoft said that Call of Duty: World at War is totally compatible and works on Windows 7 64 bit... and! do you have?

  All the best
  Bozsvfr

  Bozsvfr,
  COD: World at War is a game compatible with Windows 7 64 bit.  A common problem with some games running after moving to Windows 7's hardware drivers.  Make sure that your system meets the requirements of the game system and then update your hardware drivers.  If make sure that hardware vendors have 64-bit drivers Windows 7 available, usually video and sound drivers cause problems with games when they are not updated.

  If everything is up to date so you may want to boot your pc and test.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Think of a T410 laptop, is it useful?

  Hey there.

  I recently bought a laptop T61 used; GPU from Intel, Intel T7500 2.2 GHz, 4 GB of ram and a 14 "4:3 1400 x 1050 screen. I added a 128 GB SSD and configure the BIOS middletom SATA2 support. I also have Win8.1 64 bit that works very well wait for BSOD because of the card wifi not supported, but there is a new one with propper driver support on its way.

  This installation cost me about $265 (with the new SSD) + $10 for the new WIFI card.

  This configuration seems fine but recently someone gave me a T410 laptop and I don't know if I should get it and use instead the T61.

  The T410 specifications are:

  i5 520 (2.4 GHz)
  8 GB RAM
  Intel SSD 320 (300 GB, the guy says it's over 1 year)
  display 1440 x 900
  battery 9 cells which lasts about 3-4 hours

  He has supposedly no longer use it as much as his work has got him a newer laptop.

  He initially asked $700 for it, but fell to $575.

  I use the laptop for the school (computer science) for the 8 GB of ram can be useful when you use Visual Studio. What do you think guys?

  See you soon.

  I have ordered many ThinkPads from abroad, especially if I find a model I'm missing from my collection, but also in bulk purchases for reclamation. Great deals to be found and some big sellers too.

  Remember, there are no customs on computers here in Iceland, only VSK, is usually a better deal to bring them abroad than to buy a 2nd hand ThinkPad here, same with added postage and said VSK. (VAT in English).

• Install WD Black2 Dual Drive on a Pavilion dv6t-7000

  Hello

  I recently bought a new internal hard drive for my HP Pavilion dv6t-7000 CTO Entertainment Notebook PC and have some difficulties to install the drivers for it. I bought a Western Digital Black2 Dual disc, which is a hybrid disk with 120 GB SSD and 1 TB of HARD drive, but I can't access the 1 TB because the installer for WD drivers keeps returning an error code.

  After much digging, I found documentation of the WD site that States the particualr error I received was due to one) the SATA mode to RAID in the BIOS, or b) an Intel driver a RAID reporting configuration. I can not check the BIOS settings myself, because the tab in the BIOS for this is hidden and locked down due to the fact that I'm working on a laptop of HP (I found answers on the forums for models with slightly different laptop computer that reported the AHCI is the default SATA for HP laptops) (, but unable to verify for my particular model). However, I was able to find an Intel driver that can cause the problem in the Device Manager. It is listed under 'Storage controllers' and is called 'Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller '. When you contact the service customer of WD, the representative has tried to help me change this default Microsoft Inbox Driver by following the process: (right click > update driver software > Browse my computer... > choose from the list of device drivers). Unfortunately, it was not useful because the afforementioned Intel driver is the only one available. I was a bit puzzled by that because I installed windows 7 from scratch, only adding the drivers from the HP site needed to establish a wireless connection to download the installation of WD software.

  So basically I'm looking for help in these areas: a) to determine the particular my laptop model SATA mode, b) to understand why I have the default Microsoft Inbox Driver, c) installation of the Microsoft Inbox Driver default value or a Variant that works with AHCI, and/or d) any other course of action I could take additional troubleshooting.

  Operating system: Windows 7 Home Premium 64-bit (installation costs)

  Laptop model: HP Pavilion dv6t-7000 CTO Entertainment Notebook PC

  Hard disk: Western Digital Black2 Dual Drive

  Error: A bad SATA mode in the BIOS or reported by the Intel driver

  Pilot suspect: Intel(r) ICH8M-E/ICH9M-E SATA RAID Controller

  Thank you kindly,

  Gorkycreator

  This problem has been resolved in a more precise message than I did in the operating system of your laptop and drivers support forum.

  Here is the link:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Windows-7-SATA-storage-driver-HP-Pavilion-DV6/TD-p/3970552