R12: "Login" after Installation verification fails on OEL5

Similar Questions

• Rapidwiz upgrade to R12.2 - Web Server pre-installation verification failed

  Hello people.

  I'm on the right track to improve my EBS 12.1.3 to R12.2. I did all the pre-reqs/patch before the upgrade according to the DOC: Oracle E-Business Suite Upgrade Guide version 12.0 and 12.1 to 12.2 E48839-02 Réf..

  Finally, I run rapidwiz. However, after entering all the required values, when rapidwiz reached the status of control system, after doing several checks he stuck on 'Web server pre-installation check failed ".

  
  

  System check the status showing window continues same message for 2 hours. For more information please see the screenshot below.

  

  Please, let me know where rapidwiz creates log file so that I can investigate the reason to fail. Also, please try to fix this.

  Thank you!

  Ali

  Checksums MD5 for R12.2 Quick Install Media (Doc ID 1505510.1) helped me to solve the mentioned problem.

  Thank you

  Ali Raza Memon

• kb2492386 error 0x8024200E after installation attempt failed

  The error message above appears after checking Microsoft Update & any attempt to install updated kb2492386.

  I am running WinXP Home, SP3. Any help would be appreciated.

  Hi UKdeejay,

  1. did you of recent changes on the computer?

  2 are you able to install some other updates on the computer?

  3. do you have security software installed on the computer?

  Method 1

  I suggest that reset you the Windows Update components by default and then try to install the update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails, then I suggest that you manually download and install the update, check if it works.

  Update for Windows XP (KB2492386)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=186EDB1C-4D75-480e-AADC-CEDE88D9B047 & displaylang = El & displaylang = in

• R12 post-installation checks fail with RW-50015 for HTTP, help, virtual directory, JSP Page and Login Page

  Hello

  I try to install EBS R12 for three weeks with the same result (after five fail post-installation verification).

  I tried to install Oracle Linux 5.8 32 bit and Oracle Linux 5.8 64-bit but end result is the same. When I installed Linux oral, I chose all the option packages. I also used the latest version of RapidWiz as suggested by some posts on the forum (and also in response to my other post by Hussein).

  Each installation attempt failed with the following text:

  (x) HTTP                                      (x) Help Page

  Virtual directory (x) (x), JSP

  Login page (x)

  It failed with "RW-50015: error".

  =========

  HTTP

  ====

  check the URL = http://prod.ebs1.com:8000

  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==========

  Help page

  =========

  check the URL = http://prod.ebs1.com:8000/OA_HTML/help

  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ========

  Virtual directory

  =================

  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  JSP

  ===

  check the URL = http://prod.ebs1.com:8000/OA_HTML/jtfTestCookie.jsp

  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  Login page

  ==========

  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  ==============

  I did find a lot of information to solve this problem.

  Help, please!

  Best regards

  Well, I must fix it in next (trying to start Apache (adapcctl.sh) casts a ' error while loading Shared Libraries: libdb.so.2' on RedHat Linux 5 (Doc ID 879522.1)).

  Once you run the commands in the MOS Doc, stop and start the services than those mentioned above and it should seem so

  Thank you

  Hussein

• Post installation check fails - login page - r12 w2k3

  Hi all
  
  Before this ad here I did research this and other forums for the solution, but found no one. After getting through the steps of installation, it fails on the post installation check. Everything is fine except for the login page.
  
  I have identified the most likely reason for what is OracleVIS_XXXXX_TOOLSTNSListenerAPPS_VIS works not. When I try to start it manually, it fails with the following message is displayed:
  
  "The OracleVIS_XXXXXX_TOOLSTNSListenerAPPS_VIS service on local computer started and then stopped".
  
  I saw the post saying that he is in/etc/hosts or LISTENER. ORA, but none of them worked. I added the line to the hosts, but it did not help. I edited the LISTENER. ORA by changing of SID = SID = APPS_VIS, do not help either.
  
  I found below newspaper:
  
  
  TNSLSNR for 32-bit Windows: Version 10.1.0.5.0 - Production July 21, 2011 18:00:39
  
  Copyright (c) 1991, 2004, Oracle. All rights reserved.
  
  Log messages written to j:\oracle\VIS\apps\tech_st\10.1.3\network\log\apps_vis.log
  Trace information written to j:\oracle\VIS\apps\tech_st\10.1.3\network\trace\apps_vis.trc
  Trace level is currently 0
  
  Started with pid = 5656
  AMT-01151: lack listener name, APPS_VIS, listener. ORA
  
  Someone has an idea?
  
  Concerning
  Piotr

  J:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\admin\template
  J:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\admin\template\install\template\db

  It is under the %INST_TOP%\admin\scripts (adautocfg.cmd) - AutoConfig support directory to manage system Configurations in Oracle E-Business Suite Release 12 [387859.1 ID]

  Re: listener file - "what you need to do, it is the env file source and question"cd % TNS_ADMIN"application and you will find the file listener.ora for the application tier node" - can you tell me step by step what should I do? TNS_ADMIN % oracle env variable % or windows env var is? I couldn't find it in the variables Windows CA.

  Run the %APPL_TOP%\envshell.cmd script and then issue "cd % TNS_ADMIN.

  Page 1-23, setting the environment

  Oracle Applications Maintenance utilities - Page 1-23, setting the environment
  http://download.Oracle.com/docs/CD/B53825_03/current/Acrobat/121admu.PDF

  Thank you
  Hussein

• Failed to start after installation ripple 0.9.1

  I'm new to Blackberry Webworks development (working on my first Playbook application).  I am currently installing the tools and SDKs.  When I try to start waving after installation I get a Windows error "Application failed to initialize...". »

  I'm on WinXP SP3.

  Any advice?

  Concerning

  DM

  Edit: My Windows XP SP3 is a vmware VM.  is this a problem?

  Happy that you said that it was VM.

  Can you try disabling the video / hardware acceleration in your VM player?  This is a feature that has caused problems with other developers.

• I am trying to install a scanner treated after installation failed previously and I get the message "Could not open key".

  Could not open key

  How can I give me access to a registry key?  I am trying to install a scanner treated after installation failed previously and I get message "could not open key: UNKNOWN\Components\AFlE7E2767BA2BB41B713A00FB8FACC4\4D7CB2A83D7A5D543B2D9374815CC314.» Verify that you have sufficient access to that key...

  Click Start, type: regedit

  Click with the right button on regedit

  Click on run as administrator

  Make sure that you back up your Windows registry database before you try:

  How to make a backup of the registry in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• See 4.5 SSL fails after installation of the certificate

  I have a problem after installation following the steps described in the VMWare KB (and a bunch of other places) a certificate is currently working on an assessment of view 4.5

  I set up the environment and everything worked without problems.  Then I installed a certificate using the keytool and the steps described above, ssl connections ceased to work.  The admin page would be just a moment and my client view (currently on trial with the OS X client) would also expire during an attempt of SSL connections.  I had previously enabled connections not secure so that both connections use http still operate.

  The only difference in my SSL import procedure, it's that I signed the certificate using our AD CA.  I imported the complete certificate chain as a .p7b file and keytool complained that he did not trust my CA, (I said yes to import in any case).

  After this issue, I even tried to go back to the original signed cert free by removing the key file and the file locked.config and SSL still does not work.

  Looking through the logs of the events on the server, there is no error SSL and the view admin page itself don't report problems with the server.

  The only other reference to a similar problem, I have seen on this subject is another post on the forums, but it appers that issue was because the server was also the Wyse report server running on this issue, my server is running anything else that the display manager, I do not use a security server just one server.

  Hello

  > I had previously enabled connections not secure so that both connections use http still operate.

  The option ' require SSL for client connections and Administrator display: "is common for the customer and Admin UI connections.

  Because you have disabled this option, only the connections non - ssl will work for both.

  Connect to youyr Admin UI by using http://serverfqdn/admin/ and enable this setting and restart the login server.

  -Noble

• Oracle E-Business Suite version 12.2: consolidated list of patches and bugfixes of technology after installation R12.2.0

  Hello

  I just finished R12.2.0 Installation, I am planning to complete the RUP for r12.2.4. I use now

  Oracle E-Business Suite version 12.2: consolidated list of patches and bugfixes of technology (Doc ID 1594274.1()

  I make the correction to the database, but I ran into conflicts to patch the database. I have the patch success these patches:

  16989137

  17912217

  18419770

  18614015

  18685209

  18964939

  But I get conflicts with these patches:

  17608907

  Patch [17608907] conflict with [18259911 12849688] patches in the Oracle home.

  17654622

  Patch [17654622] conflict with patches [16587934] in the Oracle home.

  18244962

  Patch [18244962] conflict with patches [18259911] in the Oracle home.

  18436307

  Patch [18436307] conflict with patches [18259911] in the Oracle home.

  18674024

  Patch [18674024] conflict with patches [18259911] in the Oracle home.

  18964939

  Patch [18964939] conflict with [18259911 14751895] patches in the Oracle home.

  I tried to back packages of conflict just to see what was going to happen, although only gave me more than patches to install. I searched on google and metallization and have not found much, can someone please point me in the right direction.

  Thank you

  You can safely rollback Patch 16587934 as all the fixes that are included in this hotfix is installed when you apply the Patch 17875948

  Thank you

  Hussein

• Failed to start after installation ('no internet connection')

  After installation, when I start one of the programs of TC it tells me that either there is no Internet time setting my computer does not. I checked that no proxy server is set and that (of course) my clock is set correctly. We have installed the CHT several times in the team without problems is not a firewall issue. Any ideas?

  ADDING: I checked the four needed to record server address is accessible. Is there some sort of record in offline mode? It seems that even users who really have no internet connection (for example for security reasons) must be able to register...

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• R12 login page no longer work after reinstalling VMware

  Hello

  I installed 64 bit 6.3 OEL and R12 12.1.3 successfully installed and was able to connect in R12 of Linux (guest) and Windows 7 (host).

  Due to a problem with the updates of Windows 7, I had re installed Windows 7 and then installed VmWare on it. Then I loaded the saved file vmware in Vmware workstation, but this time R12 login page does not work both OEl and Windows 7. I changed the IP in/etc/hosts.

  Error: the server has encountered an internal error or misconfiguration and was unable to complete your request.

  I am new to linux and EBS r12. Is there a solution to solve the problem.

  If you have changed the IP address then you must purge the FND_NODES table and run AutoConfig on demand/database layer nodes.

  How to get a clean auto-configuration environment? [391406.1 ID]

  How to clean non-existent nodes and IP addresses ranging from FND_NODES [ID 260887.1]

  Thank you

  Hussein

• verification failed - there was an error connecting to server Apple ID.

  Just upgraded to 10.11.4. Get this error when trying to login to icloud

  Verification failed

  There was an error connecting to server Apple ID.

  I can sign in here with my id, I can sign in icloud via my web browser to my id.

  What I can't do is connect from my imac (model 2015)

  Where should I go form here?

  I have exactly the same problem and I can check that if I create a new user on my MBP (current model of 15 "), I am able to use my Icloud account once again, but not under my main user. Thus, each suggestion found in the forums here:

  • Step 2 review the deactivation
  • Config of Flushing DNS or try another DNS server
  • Uninstalling an Antivirus snake oil product, I do not use

  did not help at all. But there must be something with my user account, the system itself seems to be fine as a new user account works with the same icloud account.

  This can happen now reasons:

  • I went to use the family option one or two months previously - unplausible that this has something to do with it

  Console output for two seconds after clicking on login to icloud prefs: line 2 + y has at least 20 times with different Classes but the same error:

  02.04.16 10:14:57, 409 akd [311]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9807)

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: it has no sense to draw an image when [NSGraphicsContext currentContext] is zero.  It is a programming error. Break on Sub _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be recorded only once.  This may change in the future.

  Next steps for me will be

  • hoping someone here has an idea, so I don't have to wast hours for this
  • try to restore a backup time new machine to a new user account (would be less work) - but this option I think that will lead to problems again. I'll let you know if it is a possible way to solve the problem.
  • From a user account from scratch and selectively import settings - there is no alternative option that takes time. Usually, this is not necessary and one of the reasons why I use a mac - only not to reinstall Windows every 3 months...

• Satellite C875-123 - media verification fails

  Hello

  I just bought a pc Satellite C875-123 in a bid knowing that person empty the computer but I don't know how they did it exactly.

  "So when I turn on the pc after the Toshiba logo, message playing on a line:"Media verification failed"can Media Control 2 times" then it fades, and a line appears: "no boot device - please restart media '."
  I tried F8 and F12 but same lines appear.
  I think we need to do a restore, but I have no CD. If that's what it is possible to learn more.

  Thank you for the answers.

  Speedwell

  Message was edited: assignment has been translated

  A note: it's community of users of English language. Please post only in English!

  Regarding the question:
  Once you access the BIOS, the first page of the BIOS shows you details about the optical disk driver and the disk (size, name).
  If these details are not, isn't HARD drive recognized.

• Forbidden (403) CSRF verification failed abandoned application?

  Can someone help me fix the problem of receiving this message: Forbidden (403) CSRF verification failed abandoned application?

  I get this message after I try to connect an application on my Shoply site on my facebook business page. Can someone tell me what is the cause of the problem so that it does not happen?

  Help!

  Hi Julie,.

  Is it only happening in Firefox? Have you tried with Internet Explorer or another browser. The most common fix for this problem is to make sure that you have cookies enabled in your browser. Specifically, make sure that you have enabled cookies for facebook.com.

  I hope this helps. Please post to get help if needed.