R12 login page no longer work after reinstalling VMware

Similar Questions

• Qosmio F60: EasyControl bar no longer works after reinstall OS own

  Recently I did a clean reinstall of Windows 7 (64-bit), so miss me all the bundled Toshiba software.

  On my Qosmio F60 EasyControl bar no longer works accordingly (the buttons work again, they just don't have any effect on the volume, mute etc..).

  Does anyone know how to fix this?

  I guess that it may require simply download and install the driver from Toshiba, but I'm not sure that something is.

  Any suggestion would be appreciated.

  Hello

  What exactly do you mean by EasyControl bar?
  Do you mean the bar that appears just by pressing the FN keys?

  Have you installed the package of value added?
  If this is not the case, to do this.

  Pilots should be available on the European driver Toshiba page.

• EliteBook: portable pen no longer works after reinstalling windows

  Windows 7 crashed the week last on my Elitebook.  I have re-installed and now my pen to laptop no longer works.  Can anyone help?

  Thank you.

  Product # XU102UT.

  I was able to get a solution.  It seems that when Windows 7 is re-installed which does not include the Wacom driver, which apparently HP uses because apparently HP fired the pen, etc. from Wacom.  So after a couple of hours trying to navigate on the site of HP, I found a download link to the supported Wacom driver and I managed to do the work.

  Thanks for responding.

• Sound no longer works after reinstalling Windows XP

  My hard drive crashed, so I had to reinstall Windows XP. My sound no longer works, and I've tried everything... followed all instructions and advice from support and still NOTHING. My devices does not even appear in sounds and Audio devices... all grey so I can't make adjustments. In Legacy drivers, it is completely empty... I can't not try hard. Help, please!

  You need to install device drivers for example chipset motherboard, graphics card, map its etc go;
  (1) cd is included with your PC
  (2) the site of PC makers, so a large OEM Dell, HP or laptop - specific to your model, for example
  (3) the sites of manufacturers of equipment if a generic PC

• FN keys no longer work after reinstalling Windows

  After a reinstall of windows that my fn keys are not all work, some do, but the little icon which appeared which shows the process of fn key while using it does not either

  Should which driver I reinstall?

  Thanks in advance

  You must install the utility of Vap and flash card support, then

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Gmail no longer works after reinstalling the operating system

  I posted on a forum for Gmail and no one answered. But on the fact that I can access these gmail accounts via web browser and Microsoft Office, I think there must be a problem with the configuration of Mac. I'd like some suggestions to solve my problem!

  Recently, I have reinstalled the OS El Capitan on my MacBook Pro 2013 retina. Before the reinstall, I could access all my Gmail accounts through the native application of Apple Mail. Since then, I couldn't access any of my Gmail accounts via Apple Mail.

  I tried to disable the two-step verification, but which is not resolve it.

  I deleted all count them several times and follow the steps below, but still can not get added (don't say one of the definitions to be insane is doing the same thing twice and expects a different result?

  Here are my steps that I take every time:

  When I connect, I use my Gmail password.

  Accounts/new Internet account

  Select Google

  Enter my user name and click Next

  Enter my password (not the specific app password, but the password for Google. I tried both and he always tells me that I have to use the Google password.)

  Click next

  The dialog box then says "select the applications you want to use with this account (and the logos of Google lies at the top of this box.).

  My options are:

  Mail

  Contacts

  Calendars

  Messages

  Notes (all logos Mac for those apps)

  All are checked, but I uncheck everything except Mail

  Click done.

  The gray button 'Complete' on

  Finally after that probably 60 to 90 seconds, I get a message through Mac OS that says 'Google account you added'"[email protected] has been added.

  In this box, I gives me the options of 'Not now' or 'enable '.

  If I select 'Enable', then I get the message through Mac OS that says 'Google password required'. I get my password, and the cycle repeats again and again.

  If I select "Not now" then the account appears as 'Inactive' in my list of accounts on the internet. Once I selected, I am immediately invited for the password... and the whole process starts again.

  Facts:

  Accounts are active IMAP.

  Accounts have two factors of authentication disabled. If I turned it on, the same things happen, with the only exception to receive messages and receive through my method to deliver, security code, but once I entered it, it can still access my mail.

  I have four other Gmail account, and what is happening in the same way with them all.

  They are all very well via a browser-based email

  They are all accessible through my iPhone and iPad.

  I can't access any of them through the native mail app Apple.

  They are all accessible through Microsoft Outlook e-mail client (2016)

  I even tried to disable the option to allow 'less secure apps.  I tried it on and outside, and nothing works.

  I'm ready to give up all my Gmail accounts at this point.

  Any ideas (other than to get rid of Gmail!)

  If you have not tried this, after completing the settings, try to delete Internet accounts. Go to Mail/preferences/accounts, and then add the accounts there.

• Dell XPS 14z 3 USB port no longer work after reinstalling windows

  Hello

  I have re-installed windows on my XPS 14z,

  Installed all the drivers (chipset Inc., bios, etc.).

  updated all windows updates.

  but the driver of the USB port of the SS was not installed. (you can see on the device as "Universal Serial Bus (USB) Controller" Manager without driver)

  I've looked everywhere, I tried Dell PC checkup, pilot automatic search etc.

  On these forums, I saw a similar problem with the XPS 15z and tried their solution without success.

  can someone point me to a driver?

  Thank you

  Hi Avp40,

  Has solved my problem when I re - installed "Texas instruments TUSB 7320" driver from the driver disk.

  Hope this helps you.

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Login page does not work

  Hello

  I developed the admin dashboard a simple for my project.

  
  

  http://BHC.edu.in/BHCNET/admin/login.php
  

  
  

  The login page works well in localhost. After the download on my site, the login page does not work.

  
  

  It shows that the user name and password is incorrect. Kindly help me.

  username : admin

  password: admin

  Here is my code.

  <? PHP

  session_start();

  ? >

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < h1 align = "center" > welcome aboard the Admin! < / h1 >

  < img src = "Images/Admin - icon.png" width = "200" height = "200" style = "float: left;" Display: block; "class ="admin">

  < do action = "login.php" method = "post" name = 'loginform' id 'french' = > "

  < table width = "278" height = '174' border = '0' >

  < b >

  < td width = "102" height = "59" > < label > user name: < / label > < table >

  < td width = "187" > < input type = "text" name = "user name" placeholder = "Enter your name" / > < table >

  < /tr >

  < b >

  < td = "46" height > < label > password: < / label > < table >

  < td > < input type = "password" name = placeholder "password" = "Enter your password" / > < table >

  < /tr >

  < b >

  < td = "37" height > < input type = "submit" name = "login_but" id = "login" value = "Login" / > < table >

  < td > < p >

  < input type = "reset" value = "Reset" name = "reset_but" id = "reset" / >

  < /p > < table >

  < /tr >

  < /table >

  < / make >

  < / body >

  < / html >

  <? PHP

  If (isset($_POST['login_but']))

  {

  $name = mysql_real_escape_string($_POST['username']);

  $pass = mysql_real_escape_string($_POST['password']);

  $encrypt = md5 ($pass);

  include("include/Connection.php");

  $query = "select * from users_login where name = '$name' and password = '$pass'"; "

  $run_query = mysql_query ($query, $conn);

  If (mysql_num_rows ($run_query) > 0)

  {

  $_SESSION ['username'] = $name;

  echo 'window.open ('index.php', '_self') < script > < /script >';

  }

  on the other

  {

  echo "< script > alert ("user name or password is incorrect!") < /script > ';

  }

  }

  ? >

  Kindly help me.

  Thank you in advance.

  There are two things that stand out immediately as incorrect:

  • You call mysql_real_escape_string() before connecting to the database. The connection must come first.
  • You use the original functions of PHP MySQL. They have been deprecated and do not work on several servers. Use MySQLi .

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...

  In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...

  Can be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side; SxS) it lacks certain runtime components (Redistributable Package).

  See:

  • [908165/questions/908165] The URL is not valid and cannot be loaded

• My internal microphone no longer works after that was plugged in a mic

  Hey guys!

  I bought the HP Envy 13 spectrum (13-2113TU) earlier, and everything was smooth and functional until yesterday when I plugged it in one of these headphones with the MIC designed for phones in the 3.5 mm plug. For a second, that it did not work, but after that the external microphone worked fine. However, I find that after using the earphone, the internal microphone no longer works on Skype or any where else and it seems there is no way to test whether it is functional or not.

  In the audio Panel, there is only the stereo mix and microphone option external availible under recording devices. I checked the boxes that says see the disabled and disconnected devices but there seems to be no way to activate the interal peak. All audio drivers are up to date and nothing is cut.

  Nobody knows what is happening and what are the steps I could take to solve this problem. Thank you.

  Hi Shabab,

  I understand that your internal microphone no longer works after that a microphone is plugged into your HP Envy 13 of spectrum. If you follow this document on the microphone does not work after a webcam or a microphone USB is installed, it should solve your problem.

  http://support.HP.com/us-en/document/c01926155

  I hope this helps.

  Thank you

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• URL Bar Search no longer works after update and no research options available!

  URL Bar Search no longer works after update and no research options available!

  "URL Bar Search" which is an extension? Or are you referring to the address bar, sometimes called the address bar?

  Let's try a few basic trounleshooting.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Let know how's going on.