R7500 cut connection

Similar Questions

• On R7500/R7800 slow download speeds

  Hello:

  R7500 and R7800: I see slow speeds (wireless). Wired devices do not exhibit this problem.

  After that spend many hours of research and talking with support (which replaced my unit) I found that the problem is with the WAN port. The problem does not exist when you use a switch between the router and the modem netgear. I saw several people in the forums to have this problem so I hope this helps.

  I don't think that this workaround is however acceptable.

  Is this something that can be fixed with a firmware version?

  Steps to reproduce in my case are very simple:

  1 - R7500/R7800 connect to a POE Ubiquiti - 24 - 12 10/100 (in my case I have internet citiwide wireless). Make sure your download speed is greater than 20

  2 - test the wireless and wired with the netgear router and the router netgear download speeds.

  M.

  NETGEAR has released a new firmware for the R7800 that solved the problem (Fw 1.0.2.04)

• Hanging of L20 SP while the closure of the user of the WIRELESS LAN cards

  I have 2 new laptops on network Satellite Pro L20. They work ok until the user disconnects from the network he and the machine hangs on 'close network connections. It powers up and down without problem when not connected to the network. I have Win XP SP 2 all win updates installed, all upgrades to the bios and drivers from the Web site.
  I need HELP.

  How can I check and do? It's always the same suspended on the closure of the network connections and I have to hard start the computer to restart, even if it does not start finally if I leave it for 10 minutes.

  Hello Sio

  Believe me, that's not easy to say why just because your unit LAN configuration does not happen to us. First of all you should talk to your network administrator. He is the person who knows how it works in your company.

  I put t know if you have a few files for sharing. It is possible that someone is using the data stored on your laptop and in this case, only the laptop cannot cut connectivity. What is your IP address (the one defined where you get it automatically)?

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• I accidentally changed a *.vi labview library file. How can I fix my system?

  Dear Sir:

  I work with Labview version 8.5. works on Windows Vista o/s.

  I accidentally changed a *.vi Labview library file and now some programs which in the past has executed correctly, no more to run correctly.

  I have modified the library is named lvsound.llb and the file I changed, "SO Write.vi".

  I made two changes, however, the first amendment has been removed.

  That's what happened.   I modified the file SO Write.vi by chance, somehow, a link has been broken.

  I thought I could repair the file copy of a file to write identical SO that I had stored on another computer.     What I've done I copied the work SO Write.vi content block diagram (which was stored on a disk that is external and not stored in the 'sound' of Labview installation folder) and then I opened the SO Write.vi in the lvsound.llb (this is the *.llb of Labview installed) and deleted everything in the block and then diagram I replaced the block diagram with the copied block diagram.   I thought that that would solve my problems because the copied program did not have a cut connection - no broken arrow icon).     However, I soon discovered that programs that completed successfully before the accident, still not function properly after swapping content block diagram.

  I have attached a picture of the error message.

  Can someone tell me please the safest way to fix my system?

  Don't exchange the content of block diagram, or if you do so, as it was put in place the same connector pane. When you have removed all the controls and indicators, the connector pane has been authorized which explains why things that call this Subvi will not see that it has no control. To fix it, you need match this component of the connector:

  To set up, click an empty area of the connector pane, and then click the command corresponding or indicator. For example, down to the left of your new connector pane, click on the bottom left box, and then click 'error (no errors)' control for screws outside pass an error via the connector pane. To see where everything is connected, I would recommend that you go to a computer with a working version and one by one, click on the terminal part of the connector and the corresponding command will highlight:

  

  for example, clicking on the top left corner will highlight control "ID of the task in.

  Another option you have is to simply copy the .vi itself (file, block diagram not only) of library work, delete or rename the current "SO Write.vi" and simply drag the file .vi from the Explorer on the LLB Manager.

• Chest N3048 stack N2048 stack

  I have 2 N3048 my heart for virtualization switches and 3 N2048 switches stacked to computer/phones.   I need to connect the two heaps, I have 4 cat6 cables, connecting so

  N3048 1/0 / 47-> N2048 1/0/47

  N3048 1/0 / 48-> N2048 1/0/48

  N3048 2/0 / 47-> N2048 2/0/48

  N3048 2/0 / 48-> N2048 3/0/48

  VLANs that need to communicate are VLAN 2, 5, 11, 23

  Computers are VLAN 2 (10.10.2.0/24)

  Serviers is VLAN 11 (10.10.1.0/24)

  The development is 23 VLAN (10.10.8.0/24)

  MGMT is VLAN 5 (10.10.5.0/24)

  Each of these VLANs have an assigned IP address on each switch interface.

  My question is:

  4 ports used to kill her?

  If it was a SHIFT / port channel?

  And how the hell set.  Currently, here is my config

  Kernel stack:

  interface item in gi1/0/47
  active in mode channel-group 1
  spanning tree portfast
  switchport mode trunk
  output
  !
  interface item in gi1/0/48
  active in mode channel-group 1
  spanning tree portfast
  switchport mode trunk

  interface Gi2/0/47
  active in mode channel-group 1
  spanning tree portfast
  switchport mode trunk
  output
  !
  interface Gi2/0/48
  active in mode channel-group 1
  spanning tree portfast
  switchport mode trunk
  output
  !
  interface port-channel 1
  Description 'link - Stack1.
  switchport mode general
  pvid switchport General 11
  VLAN allowed switchport General add 2,5,11,23
  output

  User Stack1

  interface item in gi1/0/47
  active in mode channel-group 2
  switchport mode trunk
  output
  !
  interface item in gi1/0/48
  active in mode channel-group 2
  switchport mode trunk
  output
  !
  interface Gi2/0/48
  active in mode channel-group 2
  switchport mode trunk
  output
  !
  interface IG3/0/48
  active in mode channel-group 2
  switchport mode trunk
  output
  !
  interface port-channel 2
  Description "link - TPL-Core."
  switchport mode general
  pvid switchport General 11
  VLAN allowed switchport General add 2,5,11,23
  output

  I can only ping the 10.10.1.0 interfacing switches... so I know I've got completely wrong thi... Thanks for the help!

  The amount of bandwidth for a network will vary from network to network. If you have connections to available ports 4 is perfectly fine. You can always expand or cut connections later.

  The stack will act as a logical device, so there is a LAG/portchannel. User guide page 945.  http://Dell.to/1H4xyD5

  When it comes to routing between VLANs. Usually only the main switch will have an IP address for all the VLANS. The other switches will have 1 IP address for management. Your clients will have an IP address for the subnet of the VLAN they are. And have the gateway on the IP address that is assigned to the VLAN on the switch that is configured for routing.

  For the port settings try this out.

  interface port-channel 1

  Description 'link - Stack1.

  switchport mode general

  pvid switchport General 11

  switchport general allowed vlan add 2,5,23 tag

  VLAN allowed switchport General add 11 untagged

  switchport vlan allowed General remove 1

  interface port-channel 2

  Description "link - TPL-Core."

  switchport mode general

  pvid switchport General 11

  switchport general allowed vlan add 2,5,23 tag

  VLAN allowed switchport General add 11 untagged

  switchport general allowed remove vlan 1

  Then for connectivity try Ping between customers and not pass interfaces.

  Keep us informed.

• Why have I not two Akamai NetSession Client running?

  Since the last update of graphic projects running very slow, in particular ThePrintshop (23.1 Deluxe... slow still) slowed to a crawl.

  Looking at the processes running I noticed that I had two Akamai NetSession Client (netsession_win.exe * 32)

  I was not online at the time, cut connection.

  Why is this?

  In addition, can I put software that I do not use over time

  "Search everything".

  "itunes."

  "Acronis".

  they need to be using memory when I don't use the software?

  and if I did need them running, how can I change the settings so they only work when I call on them?

  Thank you

  Windows 7 Home Premium 64-bit service pack 1

  4.00 GB RAM

  Akamai Cloud Networking Solutions

  Transform the corporate network to accelerate applications, reduce costs and to connect to clouds

  Akamai Cloud Networking Solutions

  Transform the corporate network to accelerate applications, reduce costs and to connect to clouds

  FYI cloud is a virus suspicsious that block Norton and McFee TIMES.

  There is therefore no help to akami. IM passing by my pc amd today to get rid of him, as it is not necessary

• Problem of calculation Manager: planning starts the same rule several times

  We have a very odd behavior to our Oracle EPM System 11.1.2 environment. Whenever a rule of calculation Manager takes more than 5 minutes at the end, Planning begins to run again and again. In some cases, the beginning of rules down and post the error messages, others to complete correctly, after launching several times.
  
  The journal of planning looks something like this, after the launch of the rule only once:
  
  2011-07-08 14:13:41, 726 NEWS Thread-115 calcmgr.launch - Date/time began: 2011/07/08:14:13:41.726 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin
  2011-07-08 14:18:41, 737 calcmgr.launch INFO wire-117-Date/time began: 2011/07/08:14:18:41.737 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin
  2011-07-08 14:20:37, 723 calcmgr.launch INFO wire-115-Date/time end: 2011/07/08:14:20:37.722 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin.
  2011-07-08 14:23:41, 751 calcmgr.launch INFO wire-118-time started: 2011/07/08:14:23:41.751 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin
  2011-07-08 14:24:48, 093 calcmgr.launch INFO wire-117-Date/time end: 2011/07/08:14:24:48.093 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin.
  Reaquired rental list task: Fri Jul 08 14:28:12 COT 2011:1310153292779
  caching with composite grid: 55475421
  compositeGrid: com.hyperion.planning.olap.HspCompositeGrid@34e7cdd
  2011-07-08 14:28:41, 765 calcmgr.launch INFO wire-119-time started: 2011/07/08:14:28:41.765 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin
  2011-07-08 14:30:44, 116 calcmgr.launch INFO wire-118-Date/time end: 2011/07/08:14:30:44.116 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin.
  2011-07-08 14:33:41, 779 calcmgr.launch INFO wire-120-time started: 2011/07/08:14:33:41.779 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin
  2011-07-08 14:34:07, 110 calcmgr.launch INFO wire-119-Date/time end: 2011/07/08:14:34:07.109 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin.
  2011-07-08 14:38:41, 793 calcmgr.launch INFO wire-121-time started: 2011/07/08:14:38:41.793 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin
  Time in seconds: 0
  Time in seconds: 0
  Time in seconds: 0
  Time in seconds: 0
  Time in seconds: 0
  Time in seconds: 0
  Time in seconds: 0
  2011-07-08 14:39:21, 108 MORTALS Thread-121 calcmgr.launch - Date/time closed: 2011/07/08:14:39:21.108 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  2011-07-08 14:39:31, 171 FATAL-120-Date/time end thread calcmgr.launch: 2011/07/08:14:39:31.171 COT/Application/database server: localhost/COL_PYG/PYG Business Rule Name: 1.5 General. Operat Catast Seguros committees of planning user: admin.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.

  My guess is you have changed the time of do not expire on the standard interval rule and of course to have long-term rules.

  Consult the support company article rules that take more than five Minutes to execute are Re-launched several times [755406.1 ID]
  https://support.Oracle.com/CSP/main/article?cmd=show&type=not&DOCTYPE=problem&ID=755406.1

  I saw cases where a firewall or load balancer has been filed to cut connections to certain intervals, forcing the browser to submit the application re-launch. In our case, I believe that the support article is the appropriate path for your problem.

  Kind regards

  John A. Booth
  http://www.metavero.com

• Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  Is it possible to cut all the sounds and haptic feedback when the iPhone is connected to Carplay Apple?

  While driving, I noticed that all the comments navigation are also sent to my phone, creating a distraction while driving. Is there an automatic way to stop sending alerts to my watch whil the iPhone is also connected to Carplay?

  If this is not the case, consider this as your comments/request. If there is, please share. I do not want to switch manually and on all notifications when you use Carplay.

  Best regards

  Q

  Hello

  It may help to place your watch in mode do not disturb before driving:

  -On your watch: when the time display, drag upward on the dial of the watch > drag left/right to the gaze of settings > tap the moon to turn do not disturb on and outside.

  You can also disable mirroring for do not disturb mode. When mirroring is enabled, turning on do not disturb on your watch also automatically her allow on your iPhone.

  -On your iPhone, in the application of Eve, go to: Watch My > General > do not disturb - turn the market / stop iPhone mirror.

  To send comments and/or service requests to Apple, you can submit the form here (all comments are read):

  https://www.Apple.com/feedback/watch.html

  (This is a supportive community focused on user - you don't talk to Apple here).

• Re: Satellite A660-10W - connection external display with HDMI cuts sound on

  When I use an external display via the HDMI, it mutes the sound of the laptop.
  It's OK because the external display has a headphone/speaker output jack.

  However, when I close the external screen (which I use for movies only) and to use the laptop only, the sound is cut all the time that the HDMI cable is connected.

  I can't hear sound - by harman/kardon speakers or headphone - when the HDMI cable is disconnected (if the external display is turned on or off).

  Is there a way to allow me to have the choice and use her laptop - even when the HDMI cable is connected - in order not to keep plugging and plugging on?

  Thank you

  It is clear.
  If the HDMI cable is connected, then the digital output is defined as audio output by default and therefore you do not hear the sound of the internal speakers but on external monitor speakers.

  You need to change the sound settings.

  Go to control panel of-> sound-> reading tab and set the speakers to laptop as default.
  Then you should hear sound from the speakers for laptop!

• How can I work around a potentiometer that feeds a speed control using a SCC-AO10 module? Which wires I need to cut and where they connect to the SCC-AO10 module?

  I'm trying to circumvent a potentiometer that controls a blower DC motor. The potentiometer (10 kohm) has a wire greeen (+ 10V) a blue wire (ground) and a red wire (AI1 0-10 V voltage). These three sons feed a mounted ABB inverter which converts the 3 phases power somehow (220-240V) to a signal for the DC motor in the blower. I want to make a loop of speed control for the speed of the blower in Labview and I have to work around the knob. If I intend to use a PID that is equivalent to a speed measured at the speed setting, how can I get an output signal to my SCC-AO10 to the speed control? Asked me to use a switch that would allow to use potentiometer or the automatic control loop in Labview. Which wires should I cut the potentiometer and where I need to connect them on the SCC-AO10?

  Someone did this and the PID of a blower motor? Please help me if you can.

  «The promising (10 kohm) (10 kohm) potentiometer potentiometer has a wire greeen (+ 10V) a blue wire (ground) and a red wire (AI1 0-10 V voltage).» a greeen wire (+ 10V) a blue wire (ground) and a red wire (AI1 0-10 V voltage). »

  If you release the + 10V and the ground.

  The reader reacts to the voltage input (0 - 10V)

  Simply connect this red wire to your analog output module and ground (blue) on the floor of your module.

  .

• Why my PC will cut Internet connection whenever I try to open a PDF file and how do I corret the problem?

  Why my PC cuts her Internet connection whenever I try to open a PDF file and how can I fix the problem?  Even if I still have my cell phone internet access will not open a PDF document online.

  Hello

  ·        What operating system is installed on your computer?

  ·        What browser do you use to access the Internet?

  ·        It happens with PDF files or file as well?

  I suggest that you follow the instructions in the link and check if this can help:

  Cannot view PDF on the web

  http://kb2.Adobe.com/CPS/328/328233.html

  Respond with the required information so that we can help you further.

• short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  short cuts on the desktop for the URL will not work. Try to connect the browser when rises the address has not been transposed, it's all just white

  There may be some problems that repair tools are not picking up. It may be preferable to a repair facility. This can help with any corruption of the registry, which could happen by the deletion of these programs. http://support.Microsoft.com/kb/917964

  Keep in mind when running all that modifies the system it is always a good idea to have your data and backup programs (it's general advice for any system its always good to have a backup in case of possible failure of material/virus)

• My wireless connection keeps cutting at some point. How can I fix?

  My wireless connection keeps cutting to 00:30 every night and comes back at 06:00. However it does not with other devices that have no problem with the internet during these periods. I have no problems with previous routers. When I lose the connection to 00:30, it is said that the wireless network is always available, but it cannot connect. If I press on diagnose and repair, it is then said that the security code is incorrect, then I put in the correct WPA code and he says he is still a problem and can not connect. Does anyone know how can I fix?

  Hello

  It could be that at the end of the lease of the IP address of the router.

  Check the configuration of the router and make sure the IP lease is set to stay alive (or for an extended period of time).

• Audio is cut off when the USB 3 G modem is connected

  my audio piece is cut off when I insert usb 3g modem, what to do?

  When I plug my modem 3G usb, I'm connected to the net, but the audio output of the computer is turned off, even if I increase the volume to the limit max.

  Hi murugesannadar,

   

  His work was much earlier with 3G modem connected? If so, then what changes have been made prior to the issue?

  I suggest to try the resolution of the following issues with 3G modem connected and check if this may help.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  For more information follow the link below

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows