RAC duplicate because of database no CARS

Similar Questions

• Duplicates in a database to host a host b/c

  Hello

  I need to move a single instance of database 11.2.0.4 (no ASM) on host A to RAC 11.2.0.4 (ASM) to host b and c.

  I would use the active database copy, it is the right method?

  My steps are:

  • create spfile on host b
  • Add the instance to the listener on host b
  • use rman duplicate form database (the sid must be the same)
  • convert to rac with dbca

  These steps are correct?

  I have some doubt in duplicate of active database using the same instance and the name of db.

  Then this cause problems?

  Thank you

  It should work

• RMAN takes longer than usual to the database backup cars.

  Hi all

  I have a database of CARS 2 nodes (11.2.0.3) using ASM on OUL5x64 (DB1/DB2) the backup script was running on DB2 for the past 3 years without problem.

  backup with compress is 80 GB Sunday.

  level Inc 1 day = 20 to 30 GB)

  I just added 2 other nodes to this CAR, now there DB1, DB2, DB3, DB4

  moved the backup to DB4 script and set up all of the environments for this work.

  The first 2 days, it did increase normal level 1 backup around time (20-30 GB) between (1 h 30 min)

  but on Thursday which is always increase of LEVEL 1, it took 8 hours to do the job.  and when checking the size

  the backup, the size was 255 GB level 1 (s/n 20/30 GB) and today it did the same.

  Please give suggestions as why backup is so huge.

  Thank you.

  Here's the script.

  RMAN target / < < EOF

  echo setting

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT for DEVICE TYPE DISK TO ' / u02/%F';

  Run {}

  allocate channels d1 type disk maxpiecesize 5 g;

  allocate channels d2 type disk maxpiecesize 5 g;

  Compressed backupset backup

  format ' / d01/pr1/pr1_%s_%t_%p.dbf'

  extra strength 1 cumulative

  Skip inaccessible

  tag hot_db_bk_level1

  filesperset 4

  (data include current controlfile);

  # sql 'alter system archive log current';

  #Backup all archive logs

  Compressed backupset backup

  format ' / d01/pr1/pr0_%s_%t_%p.arc'

  Ark of the tag

  filesperset 4

  (archivelog all delete all entries).

  }

  Hi all

  After you resolve the problem, the support of Oracle pointed out that

  I hit the limit in this note:

  How many incremental backups can be taken when the OWA is enabled? ( Doc ID 452455.1 )

  the default value

  _bct_bitmaps_per_file = 8

  in my case, I ran more than 8 times in the week. sous-séquence then run don't use BTC (block_change_tracking)

  After running a backup full again, backup works like it suppose to.

  Thanks for the replies.

  Kind regards

• ORA-01103: the 'RAC' name in the database control file is not "STB".

  HIII..,.
  
  Im doing my dataguard, my primary side installation is a RAC 2node and Eve is a single node. IM using Database 11 GR 2.
  
  when im using the RMan command for duplication of data im getting the following error.
  
  
  
  SQL statement: alter database mount rescue
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 03/10/2011 18:33:58
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of the sql command on the channel clone_default at 03/10/2011 18:33:58
  RMAN-11003: failure during parsing / execution of the SQL statement: alter database mount rescue
  ORA-01103: the 'RAC' name in the database control file is not "STB".
  
  
  Please can someone help me to solve the issue. ??
  
  Thanks in advance...

  Hello

  (1) If you use "DORECOVER" while cloning, please remove it.
  (2) its still not, simply set the FRA and IE

  ALTER system set DB_RECOVERY_FILE_DEST = '+ DATA ';
  ALTER system set db_recovery_file_dest_size = 2GB;

  Note: Set it to primary and standby

  Clone of the DB.

  It works perfectly now, and once Reset original value if you do not want it.

  Happy cloning :)

  Kind regards
  Rakesh

• two node Oracle RAC with two Oracle databases completely different on each node?

  We currently have two different applications that use Oracle databases.  Current configuration is two different oracle homes dbhome_1, dbhome2 with separate mounting LINUX points containing the Oracle homes and *.dbf files on a single host server.

  Previously, the idea was to set up a second server identical host configured as a 'data guard' for both of these databases.  Now, management wants to implement a cluster of CARS of two nodes, with each node running two databases.  With the Standard edition.

  I only did CARS of high availability and scalability for a single database.  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?  I am inclined to think that they it has divided into

  two clusters RAC to two nodes on four small servers host.  Any suggestions or comments would be appreciated?

  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?

  The short answer is Yes... it is possible.  It will work without any problem, as long as you have the resources available to an additional database.

  I am inclined to think that they it has divided into two clusters RAC to two nodes on four small servers host.

  There is another option.  In the past I have two databases on a RAC cluster that has been implemented for reasons of cost of license / (I don't think that this applies to itself, but you will need to check).

  However having seen on separate hosts that you have only potentially interruptions of service on a database if you decide to do something like upgrading from one of the databases and thus upgrade the GI as well.  This would mean interruptions in service for all your databases using the GI.

• RMAN-11003 RAC 10 g 2 database recovery

  Hello, I'm doing a full restore of the database and when it was done the recovery database, always get the error:

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover to 15/07/2014 06:07:04

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' / archive/archivelog/PEP/PEP1_74_852396492.arc'

  ORA-00283: cool cancelled due to errors

  ORA-01112: media recovery not started

  It's a two nodes with the version 10.2.0.4 RAC' once which annuls the recovery, I open the database and everything is OK.

  The steps are:

  srvctl stop database d PEP

  sqlplus "/ as sysdba".

  bootable media;

  ALTER system set cluster_database = false scope = spfile sid ='* ';

  stop immediately;

  bootable media;

  RMAN target /.

  PARALLELMEDIARESTORE OFF SET;

  RMAN > restore database;

  RMAN > restore database;

  errors:

  RMAN-03002: failure of the command recover to 15/07/2014 06:07:04

  ORA-00283: cool cancelled due to errors

  RMAN-11003: failure in parsing / execution of the SQL statement: alter database recover logfile ' / archive/archivelog/PEP/PEP1_74_852396492.arc'

  ORA-00283: cool cancelled due to errors

  ORA-01112: media recovery not started

  RMAN > alter database open;

  The database opens successfully

  NAME CHECKPOINT_CHANGE # CHECKPOINT_CHANGE # STATUS

  -------------------------------------------------- ------------------ ------------------ ----------------

  /BD/oradata/PEP/System01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/undotbs01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/sysaux01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/undotbs02.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/users01.dbf 1025895 1025895 Normal startup

  /BD/oradata/PEP/vmware01.dbf 1025895 1025895 Normal startup

  / BD/oradata/PEP/RMANT01. DBF 1025895 1025895 Normal startup

  There, the error occurs if everything seems to be ok.

  Thank you

  The scenario is very probably below:

  You have restored a controlfile who had an old sequences in his V$ LOG (compared to archived newspapers with the later sequence numbers) and the related recovery online papers were physically available on the disc. RMAN preferred just retrieve available online Redo Logs and therefore simulated a full recovery (anyway, he did not ask CAMILLE):

  Once even a single online Redo Log has been applied, recovery get ORA-283

  My Jul 14 18:14:43 2014

  Recovery Media Log /archive/archivelog/PEP/PEP2_29_852396492.arc<(====== archivelog="" seq#="" 29="" thr#="" 2="">

  My Jul 14 18:14:43 2014

  Online Redo Log recovery: thread 1 mem Group 1 Seq 25 reading 0<(===== online="" redo="" log="" seq#="" 25="" thr#="" 1="" got="">

  Mem # 0: /bd2_PEPui3/redo/redo11.log

  MEM # 1: /archive2/oradata/PEP/redo12.log

  ORA - 279 marked during: alter database recover logfile ' / archive/archivelog/PEP/PEP2_29_852396492.arc'...<(=== archivelog="" seq#="" 29="" thr#="" 2="" throwing="">

  My Jul 14 18:14:44 2014

  ALTER database recover logfile ' / archive/archivelog/PEP/PEP2_30_852396492.arc'

  My Jul 14 18:14:44 2014

  Recovery Media Log /archive/archivelog/PEP/PEP2_30_852396492.arc

  ORA - 288 marked during: alter database recover logfile ' / archive/archivelog/PEP/PEP2_30_852396492.arc'...<(==== archivelog="" seq#="" 30="" thr#="" 2="" throwing="">

  My Jul 14 18:14:44 2014

  ALTER database recover continue

  My Jul 14 18:14:44 2014

  Online Redo Log recovery: thread 1 mem Group 2 Seq 26 reading 0 (= Seq # 26 Thr # 1 newspaper... and so forth below... applied online )

  Mem # 0: /bd2_PEPui3/redo/redo21.log

  MEM # 1: /archive2/oradata/PEP/redo22.log

  My Jul 14 18:14:46 2014

  Online Redo Log recovery: Don 2 mem 3 Seq 31 reading 0 group

  Mem # 0: /bd2_PEPui3/redo/redo31.log

  MEM # 1: /archive2/oradata/PEP/redo32.log

  My Jul 14 18:14:48 2014

  Online Redo Log recovery: Don 2 mem Group 4 Seq reading 32 0

  Mem # 0: /bd2_PEPui3/redo/redo41.log

  MEM # 1: /archive2/oradata/PEP/redo42.log

  My Jul 14 18:14:51 2014

  (PEP2) Complete media recovery

• DUPLICATE TAPE BACKUP DATABASE

  
  Hello

  I wonder if someone can help me. My environment is Linux, and the Oracle version is 11.2.0.3.0. I'm trying to clone a database from one server to another by using a tape backup (no database). I implemented the appropriate TNS entries, so that the two systems can communicate. I created a password file and a PFILE in the destination server, and I started upward (NOMOUNT) of the instance.

  Initially, I tried the operation from the destination server; I received the error message such as: RMAN-06100: no channel to restore a backup or a copy of the data file 11

  Suspecting that the destination server have not may not be the level of appropriate access to the MLL, I tried the operation from the source server.

  But I am getting: RMAN-06101: no channel to restore a backup or a copy of the control file

  Source database: MM1

  (Cloned) database of destination: MBA

  RMAN script

  ------------------

  target connection.
  connection Assistant sys/***@MBA

  Run {}
  allocate channel 'dev_01' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  allocate channel 'dev_02' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  allocate channel 'dev_03' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  allocate channel 'dev_04' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  Disc CHANNEL AUXILIARY ALLOCATE c1 TYPE of AIRCRAFT;
  up to the time "to_date('14-aug-2013:16:20','dd-mon-YYYY:hh24:mi')";
  DUPLICATE THE MBA NOFILENAMECHECK TARGET DATABASE;
  output channel c1;
  release the string "dev_01";
  release the string "dev_02";
  release the string "dev_03";
  release the string "dev_04";
  }

  Journal:

  ------

  Recovery Manager: release 11.2.0.3.0 - Production Fri Aug 15 11:27:24 2013

  Copyright (c) 1982, 2011, Oracle and/or its affiliates.  All rights reserved.

  RMAN >
  RMAN >
  connected to target database: MM1 (DBID = 1713891644)

  RMAN >
  connected to the auxiliary database: MBA (unassembled)

  RMAN >
  RMAN > 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > 10 > 11 > 12 > > > > > > 18 17 16 15 14 13 >
  using the control file of the target instead of recovery catalog database
  allocated channel: dev_01
  channel dev_01: SID = 188 device type = SBT_TAPE
  channel dev_01: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protector

  allocated channel: dev_02
  channel dev_02: SID = 17 device type = SBT_TAPE
  channel dev_02: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protector

  allocated channel: dev_03
  channel dev_03: SID = 191 device type = SBT_TAPE
  channel dev_03: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protector

  allocated channel: dev_04
  channel dev_04: SID = 31 device type = SBT_TAPE
  channel dev_04: A.06.20/PHSS_42081/PHSS_42082/DPSOL_00448/DPLNX_ Data Protector

  allocated channel: c1
  channel c1: SID = 161 type device = DISK

  executing command: SET until clause

  From duplicate Db 15 August 13

  content of Script memory:
  {
  clone of SQL "create spfile from memory";
  }
  execution of Script memory

  SQL statement: create spfile memory

  content of Script memory:
  {
  clone to stop immediately;
  startup nomount clone;
  }
  execution of Script memory

  Instance Oracle to close

  connected to the auxiliary database (not started)
  Oracle instance started

  Total System Global Area 6631034880 bytes

  Bytes of size 2240744 fixed
  2315259672 variable size bytes
  Buffers data 4294967296 bytes
  Redo buffers 18567168 bytes
  allocated channel: c1
  channel c1: SID = 11 type of device = DISK

  content of Script memory:
  {
  until the SNA 208772810.
  clone of SQL 'alter system set = db_name
  "MM1" comment =
  ' Modified by RMAN duplicate "scope = spfile;
  clone of SQL 'alter system set db_unique_name =
  "MBA" comment =
  ' Modified by RMAN duplicate "scope = spfile;
  clone to stop immediately;
  Start clone force nomount
  Restore controlfile primary clone;
  change the clone database mount;
  }
  execution of Script memory

  executing command: SET until clause

  SQL statement: change the system db_name set = comment "MM1" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "MBA" = "modified by RMAN duplicate" scope = spfile

  Instance Oracle to close

  Oracle instance started

  Total System Global Area 6631034880 bytes

  Bytes of size 2240744 fixed
  2315259672 variable size bytes
  Buffers data 4294967296 bytes
  Redo buffers 18567168 bytes
  allocated channel: c1
  channel c1: SID = 160 type device = DISK

  From restoration to August 15, 13

  output channel: dev_01
  output channel: dev_02
  output channel: dev_03
  output channel: dev_04
  output channel: c1
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 15/08/2013 11:28:44
  RMAN-05501: abandonment of duplicate target database
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06101: no channel to restore a backup or a copy of the control file

  RMAN >
  RMAN >

  Complete recovery manager.

  I finally understood what was wrong with my approach. I had missed a bit in the literature: the definition of AUXILIARY channel should be the same as that used for the backup. Of course, RMAN normally does you not clear in its mystical error messages.

  In addition, according to the document, it's a good idea to create a SPFILE in the auxiliary instance. I did it.

  Therefore, in my case, the same channels as those used for backups on tape. So is the syntax I used successfully:

  target connection.
  connection Assistant sys/***@MBA

  Run {}
  allocate channel 'dev_01' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  allocate channel 'dev_02' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  allocate channel 'dev_03' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  allocate channel 'dev_04' type 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE 'sbt_tape '.
  parms ' ENV = (OB2BARTYPE = SAP, MM1, OB2BARLIST = WYC_CENTRICA_wycvlsapx115_SAP_MM1_ON_Weekly = OB2APPNAME), SBT_LIBRARY = / opt/omni/lib/libob2oracle8_64bit.so ';
  up to the time "to_date('15-aug-2013:12:30:46','dd-mon-YYYY:hh24:mi:ss')";
  DUPLICATE THE MBA NOFILENAMECHECK TARGET DATABASE;
  output aux1 channel;
  release the string "dev_01";
  release the string "dev_02";
  release the string "dev_03";
  release the string "dev_04";
  }

  To improve the programming of schedules, the next time I can increase the number of auxiliary channels. I need to know how many tape drives, I have at my disposal.

• RMAN duplicate for standby database failed

  Hello
  I have try several times and for one reason, the auxialiary database finished just as it goes up the auxiliary instance.
  Target database in double check to stanby with the following error. Primary and auxiliary bodies
  Run 11.2.0.2 and are on the same platform of Solaris/patches. Everyone ran in that issue and solve it?
  
  RMAN target / catalog user@catalog
  startup nomount
  Run {}
  allocate auxiliary channel tp1 type sbt_tape;
  allocate auxiliary channel tp2 type sbt_tape;
  target database double standby nofilenamecheck;
  }
  :
  :
  :
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00601: fatal error in the Recovery Manager
  RMAN-03004: fatal error when executing command
  RMAN-04006: auxiliary database error: ORA-01092: ORACLE terminated instance. Disconnection forced
  RMAN-03002: failure of the command duplicate Db at the 15:28:52 01/02/2012
  RMAN-05501: abandonment of duplicate target database
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-03009: failure of switch control on channel clone_default at the 15:28:52 01/02/2012
  ORA-03113: end of file on communication channel

  You have error ORA-7445. I would ask allows you to check the MOS document that said Mseberg.

  Also, do not have the DATA01 on the standby database if your wait is a database not ASM. But you must give the path in the db_file_name_convert and log_file_name_convert on the eve pfile/spfile database

  1 question: is your watch set up database to be on ASM or not?

  See document MOS * no not guide to create physical standby on Normal file system for ASM primary with RMAN [838828.1 ID] * If your principal is on ASM and intelligence on the file system

  See document MOS * Step By Step Guide on creating physical standby with RMAN duplicate in ASM Filesystem for primary ASM [837102.1 ID] * If your primary and the day before are on ASM

  Published by: srp on February 3, 2012 03:49

• Oracle Applications database upgrade CARS active.

  Hello
  
  I want to upgrade the database and software cluster ware.
  
  database is 10.2.0.4 and upgrade to 11g rel 2
  
  Our current environment is 2 DB on 10.2.0.4 RAC node
  CRS on 11g R1
  ASM on 11 GR 1 material
  
  database is in environment Linux OS and Sun/solaris OS application, i, e R12
  
  . Please let us know if special measures must be taken to upgrade in this environment.
  
  
  Kind regards.
  
  Published by: 836778 on April 13, 2011 02:11

  Salvation;

  Pelase see below-master not EBS related issue of db:
  Holdings of database for EBS version 11i and R12 [ID 1072409.1]

  Respect of
  HELIOS

• Doubts to duplicate a RMAN database on another test server

  Hello
  
  DB: 10.2.0.4
  Operating system: Aix 5.3 L
  
  I have the single server database and I want to duplicate other test server (AIX 5.3) database (10.2.0.4).
  
  My questions are,
  
  1) I'll have to take backup RMAN in Production , and then a move to the Test Server?.
  
  2) in the Test Server , I duplicate RMAN connection and database creation reason as follows.
  
  RMAN TARGET SYS/xxx@test SYS/xxx@PROD ASSISTANT
  
  RUN
  {
  allocate channel c1 DEVICE TYPE disk;
  DUPLICATE TARGET DATABASE to test nofilenamecheck. # test is my database to the TEST Server
  }
  
  The steps above from RMAN will work without RMAN backup in the TEST Server? If not, then how can create the database test without backup RMAN duplicate?
  
  
  
  My main problem is that I have enough disk space in my production server is saved and my database size is 3TO. My database is on ASM.
  
  
  I really like, if I have no response.
  
  Thank you
  Therese

  Yes, database of target duplicate of the active database is available 11 g.

  For 10g, you will need to take backup of primary education and take it all to the test and database duplicated just run.

  Hope that helped u :)

  Mark it as answered and close the question if answered :)

• How to connect and commissioning a RAC 10 g windows database

  Hi all
  
  could someone explain to me how do I connect two-node RAC in windows2003 server and start the database? say frpom (service oracle TEST1) server003 and server004
  (service oracle TEST2). RAC database service name is "test.world".
  
  Thank you...

  Hello

  If you want, you can start a single instance

  srvctl start instance test test1-i d

  or

  srvctl start instance test d-i test2

  and you can use

  sqlplus / as sysdba

  SQL > startup
  SQL > conn sys/password@test2
  SQL > startup

  Concerning

• Stop and start BECAUSE the database with standby

  Hi all
  
  
  Oracle 10.2.0
  
  I am new to Oracle RAC.
  
  Is there any order or the way I shlould follow when stopping or starting up a database cluster with database pending.
  
  I don't know the format. Which is in a way even as single instance Oracle.
  
  1 depress the standby database.
  2 knock the lsnrctl to standby.
  3 stop primary database.
  4 depress the lsnrctl for primary education.
  
  Please advice...
  
  TIA,
  
  Published by: ORCLDB on March 21, 2009 09:05

  Hello

  First make sure that both nodes are running, usually clusterware returns automatically after the reboot, but you can handle manually to help. Also use cluvfy for validation test after the interview.

  crsctl stop crs
  
  crsctl start crs
  
  srvctl start listener -n mynode1
  
  srvctl start database -d db_name
  
  srvctl start service -d db_name
  
  crs_stat -t to verify which services are offline or online
  

  Concerning

• Issue duplicate of active database

  Can I reproduce an Oracle 10 by mode of a database?

  N ° it is a feature of Oracle 11.

  Best regards

  mseberg

• RMAN duplicate a 10g database

  I need to update or copy the data from prod database of production to database development. It must be a process automated to run each week. The size of the prod database that you want to copy is 110 GB. RMAN will resume work for it rather than the export/transom for refresh data with data from prod dev.
  Please notify.

  Yes, rman is the best way to do replication or cloning. by process of data duplicated

• Open SQL or the table creation failed. error # 3214: insertion failed because the database is full

  Yo UN Word UN largo, from eso amicable text copy to me Lodges y cuando quiero open recuperado el me arroja ese message.

  Luego, is me cierra application y cuando intento open in su inicio is me cierra.

  Sorry guys... it seemed to be simply not enough space on my drive... my fault...

  Thanks anyway