RMAN takes longer than usual to the database backup cars.

Similar Questions

• Satellite L735 take longer than usual to start

  My toshiba Satellite L735 took more time than usual for what it starts (more than a minute, takes usually 40 dry) gave it to the service center, they said they will update the BIOS, optimized computing processor, formatted.

  Again, it was beautiful, but the problem was back in less than a month, he took once again, the person at the counter just reduced unnecessary programs from startup list, came home to notice it took even more time to start (more than 2 minutes).

  When I turn it on, its fine all get the logo windows in no time, but after a black screen appears and remains for about a minute and a half, then the home screen appears, the startup sound in windows that is supposed to play as soon as the home screen plays on 40 dry aftr homescreen appeared.

  Help, please.
  Thank you.

  Hello

  The laptop seems to load windows slowly because too many processes would be loaded initially.
  First of all, I recommend to download and install the CCLeaner. This freeware tool would help you to clean the registry and remove the waste from the system.

  In addition, you should check your processes that would be loaded initially.
  Run msconfig and go to the Startup tab. Here you can disable any process necessary and not important.
  I put t know how much computer experience you have so be careful with that.
  If you n t know what exactly does the unique process, google for more details.
  Remove a mark of close process will disable this you can later too

  In addition, I would recommend checking your anti-virus software, I switched from Norton Antivirus software Avira Antivir because it is much faster and does not require a lot of hardware resources the Avira antivir is freeware software so you can install and use for free.

  Last but not least to defragment the HARD disk in order to ensure access to data faster

  Good luck

• Unsuccessful login message - error message after "connection to the network is taking longer than usual"

  -All right, so I won't try to describe my problem by telling you what happens when I try to connect to any other network that my own home network (a school, work, network etc.).

  First of all, I try to connect and I get the message:

  "network connection takes more time than usual ' which of course is soon followed by the message"connection failed"after which said the logo of the network on the lower corner of the taskbar"

  this computer has limited or no connectivity"click to run a repair and three options including".

  automatically get new ip for the "wireless network connection" network card settings«»

  Reset the network adapter', and there is no internet here (I'm paraphrasing this one of course). "

  Now, sometimes if I click on one of the service options and the connection starts immediately, sometimes I have to click two options, one after the other fails to solve the problem, sometimes, I have to click on them each several times before it works (you one and two of another, for example).

  most of the time receiving the message ' windowstried a repair but a problem persists. " This computer has limited or no connectivity"between the stages of repair. I know that of not explore because I used mozilla firefox and google chrome and I get the same problem. I even tried to reboot once the connection has failed the first time. My computer is up to date and I have passwords for my school and respective secure networks of works.

  Y at - it as any indication of what could happen here for me to have to reset and click and wait and fix almost every time that I get on any network, but my home network?

  Thank you for your time,

  Bryan

  Hello

  Hello

  You scan the computer and make sure that it is clean of viruses and malware.

  Download the latest drivers for the wireless card from the support page for the manufacturer of the laptop computer and update the drivers for the card.

  After that.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  The same processes to refresh the TCP/IP replaces the command typed with.

  netsh int reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  -----------------------

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Problem of temporary file in the database takes a while to start the database

  Legends of dear,

  I am facing the warning next or problem with R12.0.6 64 bit and 10.2.0.3 databases in a linux environment

  Mar 20 18:24:23 Oct 2015

  *********************************************************************

  ATTENTION: The following temporary tablespaces do not contain any file.

  This condition can occur when a backup controlfile

  been restored.  It may be necessary to add files to these

  storage spaces.  This can be done using the SQL statement:

  ALTER TABLESPACE < nom_tablespace > ADD TEMPFILE

  Furthermore, if these temporary tablespaces are no longer

  necessary, then they can be recessed.

  Temporary tablespace is empty: TEMP3

  *********************************************************************

  When I questioned my database_properties

  Select * from database_properties where name like '% TEMP % ";

  

  Journal Alerts

  Mar 20 18:24:23 Oct 2015

  Completed: ALTER DATABASE OPEN

  Mar 20 18:24:25 Oct 2015

  Additional checkpoint up to RBA to RBA [0x68e.5c2b5.0] [0x68e.5c26c.0], current journal line

  Details of the Temp file

  /Oracle/prod/DB/apps_st/data/temp03.dbf	1	TMP4
  /Oracle/prod/DB/apps_st/data/temp04.dbf	2	TMP4

  Because of the warning above when I give 'start-up' in "sqlplus" or start the database using the addbctl.sh script there is a huge gap between the following

  SQL > startup;

  ORACLE instance started.

  Total System Global Area 2147483648 bytes

  Bytes of size 2074112 fixed

  872417792 variable size bytes

  1258291200 of database buffers bytes

  Redo buffers 14700544 bytes

  Mounted database.

  ..............

  ................

  ..............

  .............

  ...........

  .......... (LOCAL TIME - 10 to 15 minutes)

  ...............

  ...............

  .................

  ........

  Open database.

  Please suggest how to deal with this.

  Thank you

  Knockaert

  Hello

  It is a question of pure database. Not much relationship to the EBS.

  Anyway, as stated in the warning, you must add a temporary file in the tablespace TEMP3 or drop the tablespace if you do not need.

  Can you post the full alerts log part, which takes 10 to 15 minutes?

  Kind regards

  Bashar

• Restoring a backup RMAN to a new instance of the database

  Hi guys,.

  I have a problem with restoring a backup RMAN I have with me a new instance of the database. I have with me are:

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2. backup of the control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  3. the full backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_. BKP)

  I received these files to a client environment and I need to restore these to a new instance of the database on a local computer. I gave an attempt as follows (in Oracle 10 g):

  1, creates a new instance of the (Test75) database using the Oracle Database Configuration Assistant

  2 SET ORACLE_SID = Test75

  3 connection to this instance with RMAN

  4 tried to restore the SPFILE from the BKP file received.

  
  

  I make mistakes and cannot continue. I don't know if I will carry out the correct steps. Please help me telling me how I should achieve this goal.

  
  

  Thank you.
  

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2 backup of control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  The first backuppiece resembles a ControlFile and the other looks like a SPFILE'

  > I get error and cannot continue

  What is the error?  (I assume that you have tried to restore the O1_MF_NNSNF_SPFILE_BU_92DVGW9H_ SPFILE. BKP

  Note that you must also SET the DBID before restoring the controlfile

  Hemant K Collette

• Different screen rises than usual on the 'import '.

  Clicking on import into lr, ususally full screen comes up with 'Add' at the top right. Instead I constantly received, recently, a long narrow box at the Center and nothing happens when you click import it. It was only recently. thnks

  Can you show us a screenshot?

  Is it what is described here specify import options in the section "Import pictures using fewer Options"?

• FF takes longer than Chrome to begin

  I have been using ff for 2 years. I noticed that when comparing chrome one ff, FF takes a long time to start.
  I used these plug-ins:

        Adobe Acrobate 10.1.9.22
        Java deployment Toolkit 7.0.650.20 10.65.2.20
        Java(TM) Platform SE 7 U65  10.65.2.20
        Shokewave Flash 13.0.0.214
        Silveright Plug-In 5.1.30214.0
        VLC Web Plug-in 2.1.3.0
        VLC Web Plugin 2.0.6.0
        Picasa 3.0.0.0(Disabled)
  and Themes:
         FT Deep Dark 10.3.8   (using now)
         3D Digital Blue Dlow
         Default 30.0
         LavaFox V2-Green 2.2.6
         Metal Lion Austrails Theme 2.0.1.4.91
         Simple White 2.1.4
  

  enrichment:

         AdBlock Plus 2.6.3
         avast!Online Security 8.0.1506
         Download Status bar 10.1.0
         Youtube ALL HTML5 2.1.3
         Lightbeam 1.0.10.1    (disabled)
  

  Windows is Windows 7 64-bit, RAM DDR3 2 GB.

  To remove VLC, type about: plugins in your address bar, scroll down until you see the VLC plugin and delete the dll file pointed by ' path:'.

  It can also help to disable hardware acceleration, as pointed out by multiple users.

  To disable hardware acceleration follow the instructions in the post following disable hardware acceleration.

  I noticed Firefox slower than Google Chrome spear as well.

  It's good to hear that Firefox is faster in safe mode.
  Safe mode is faster because it turns off a lot of different modules, plugins and other things.

  Maybe have a look at the plugins as well in the plug-ins section and disable those you don't use often.

  You don't have to remove completely the plug-ins, but you can disable them also teporarily. In the menu dropdown.

  To completely remove a plug-in you can uninstall the software that comes with it. To do this take a look at this article: remove the Plug-ins.

  I don't expect Firefox to become as fast as Chrome, but following the steps above, I think that Firefox can speed up considerably.

• Explorer.exe takes more than 90% of the CPU when I opened start &#62; menu programs

  IM using Vista Ultimate with Aero theme. I am a single user of this computer. When I open Start-> programs menu, an explorer.exe process takes 90% and more CPU resources and remains to be done (even if I don't move the mouse or press any key on the keyboard) until I close the menu programs. What continues?

  Hello Serresjio I can almost guarantee you that the troubleshooting steps will flip over as soon as you start back. my suggestion is if possible, remove the hard drive and the scanner on another computer with Malware Bytes Anti Malware, Avast! Antivirus and Spybot Search and Destroy, AVG etc. (all updates of course). usually, I use this method when everything has failed. Don't be too surprised boyfriend so often that I have a USB-(e sata, 1394, 2.5"/5.25 IDE) converter for the toughest jobs.

  Everything do you to not lose hope and format as most of the people do. I have corrected problems of windows than most irreparable thought technicians. It's just a matter of removing the cause and repair the damaged windows files. the problem can be solved the difficulty is just to use the proper tools/software. Lately I use Avast and MBAM with 100% recovery. It IS not JUST a single unrecoverable machine!

• Laptop taking longer than usual to start time

  Hello everyone. It's been about a month, my laptop takes about 10-15 minutes to get started (happens once in every 10 to 12 days, while usually it takes about 4 minutes). I turned off unnecessary startup programs, but it still happens.
  My current operating system: Windows 8

  RAM: 4 GB

  HARD DRIVE: 500 GB

  Graphics card: Nvidia GT640M

  Thanks in advance...

  Hi rap.

  1. do you get an error related to the question message/code?

  2. you did it any hardware/software changes to the computer before the show?

  3. What is the brand and model of the computer?

  Too many unused folders and subfolders can affect the performance of the laptop.

  Method 1:

  Disconnect or disable any external devices (printers, scanner, USB (universal serial bus) drives, sound card and graphics card etc.) except the mouse and keyboard and then boot\start the computer.
  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.

  Method 2:

  Run the system maintenance troubleshooter.

  a. press the Windows key + W on the keyboard.

  b. type Troubleshooting , and then click settings under the search field.

  c. click on find and solve the problems.

  d. click on system and security.

  e. click on follow-up of the maintenance of the system; the guests there and check.

  Method 2:

  Check out the link and follow the steps to improve the performance of the computer:

  Improve performance by optimizing your drive

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Scans of partition take longer than a full table on a non-partitioned table scan?

  Hello

  I have a PART_TABLE range partitioned table that has 10 million documents and 10 partitions having 1 million records each. Partition is based on a column named ID, which is a sequence of 1 to 10 million.

  I created another P2_BKP table (do a select * from part_table) which has the same group of data than that of PART_TABLE, except that this table is not partitioned.

  Now, I run the same query on the tables to get a range of data. Precisely, I'm reading only the data present in 5 partitions of the partitioned tables that requires theoretically less reading than when done on non partitioned tables.

  Yet the query seems to take more time on a table that is partitioned only when running on a non-partitioned table. No reason precisely why is this the case?

  Here's the query I am trying to run on the tables and their Plans to explain corresponding.

  ASK A

  =========

  Select * from P2_BKP where id < 5000000;

  ----------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time |

  ----------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |        |  6573K |   720 M | 12152 (2) | 00:02:26 |

  |*  1 |  TABLE ACCESS FULL | P2_BKP |  6573K |   720 M | 12152 (2) | 00:02:26 |

  ----------------------------------------------------------------------------

  QUERY B

  ========

  Select * from part_table where id < 5000000;

  -------------------------------------------------------------------------------------------------------

  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |

  -------------------------------------------------------------------------------------------------------

  |   0 | SELECT STATEMENT |            |  3983K |   436 M | 22181 (73) | 00:04:27 |       |       |

  |   1.  RANGE OF PARTITION ITERATOR.            |  3983K |   436 M | 22181 (73) | 00:04:27 |     1.     5.

  |*  2 |   TABLE ACCESS FULL | PART_TABLE |  3983K |   436 M | 22181 (73) | 00:04:27 |     1.     5.

  -------------------------------------------------------------------------------------------------------

  016f62a3-35cf-4f4e-B812-95774e4d662f wrote:

  Now, I run the same query on the tables to get a range of data. Precisely, I'm reading only the data present in 5 partitions of the partitioned tables that requires theoretically less reading than when done on non partitioned tables.

  Yet the query seems to take more time on a table that is partitioned only when running on a non-partitioned table. No reason precisely why is this the case?

  Have you actually run the queries, or you assume that they will take different amounts of time because the execution plans show different numbers?

  It is clear from the output of the execution plan that the statistics are not very good, since Oracle should have estimated about 5 M of lines for each request. That said, however, Oracle should have used the counties of partition block level to estimate the cost of the analysis of the 5 score - and we could expect them to a total of less space than a full copy.

  Of course, it is possible that your partitioned table has been the subject of many DML involving the line movement and line of chaining; It is possible he has been the subject of many lots of parallel or direct path loads inserts leaving much free space in each partition. It is also possible that you have created the copy in a tablespace that table of default compression!

  What are the stats for the original table partition level?   (select nom_partition, num_rows, blocks of user_tab_partitions where table_name = 'T1' partition_position order)

  Concerning

  Jonathan Lewis

• dx2400: Audio driver on HP support page, longer than driver on the machine

  I'm trying to make sure I have the latest audio driver for my machine.  On my computer for realtek high definition audio driver is version 5.10.0.6482 and the date 18/10/2011. The driver on the HP support site is 2009. Do I not have the most recent update. I ask because I have problems with Audacity 2.1 DAW.

  My system

  Compac HP dx2400

  pn2UA9260C7K

  My problem with Audacity is the following:

  When I move the pointer to record level in Audacity, the audio Windows icon shows that the sound is muted. When I activate the sound in Windows, the recording Audacity level tends to zero. The notice on their forum was to ensure that the correct audio driver is installed, but mine is two years more recent than the one on the HP support site. But I still don't know if I have the right pair.

  Any help is very appreciated.

  Mike

  Hello:

  You can get the latest Realtek HD audio driver from the link below.

  Accept the agreement.  DL and install the first pilot shown in green for Windows XP Home edition.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Shut down Windows takes longer than 3 minutes

  Separated from this thread.

  When I stopped in Windows 7 the "Shutting Down" screen stays on for more than three minutes. I tried to start in safe mode, but I get the same result. I tried to disable third-party programs and get the same result.

  It's annoying when you have to restart.

  Frederik

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

• How to print a message longer than that of the computer screen? I tried to scroll down to print the rest but it still prints only the upper part.

  If it please help as soon as I'm in a billing dispute regarding & e-mail that I try to print an electronic receipt.

  Hello

  When you have multiple pages to print, when you click on print, you'll get a configuration of the printer option, you can select the range of pages at all.

  If you select the scope of all pages you can print all pages.

  It will be useful.

• "Backup Optimization" does not work for the "database backup"

  Hello
  
  I use a windows environment and my info from database is like this:
  

  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production

  now I have to change my configuration for backup optimization on and then make example tablespace offline and do file sample data in offline mode. After that, I run 2 times 'Backup Database' command but 2 backup has the same size and have example tablespace too... Any backup archivelog is work bur backup database is not!
  According to this link, it does not backup datafile for the second example: http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV113
  is there something I missed?
  
  configuration of RMAN:
  

  CONFIGURE RETENTION POLICY TO REDUNDANCY 5;
  CONFIGURE BACKUP OPTIMIZATION ON;
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
  CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
  CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
  CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
  CONFIGURE MAXSETSIZE TO UNLIMITED; # default
  CONFIGURE ENCRYPTION FOR DATABASE OFF;
  CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
  CONFIGURE COMPRESSION ALGORITHM 'HIGH' AS OF RELEASE 'DEFAULT' OPTIMIZE FOR LOAD TRUE;
  CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'C:\APP\ABC\PRODUCT\11.2.0\DBHOME_1\DATABASE\SNCFORCL.ORA'; # default

  No failure, it works an expected. There is a relationship between the retention policy and the number of backups:

  RMAN only ignore backups of offline or read-only data files when there are backups n + 1, where n is the redundancy. You have of the "REDUNDANCY 5', and you will keep 6 identical backups of the offline data file.

  Werner

• iPad backup restore take more than two days

  WWas of problems with the battery on my iPad Air life. taken at the Genius Bar at Apple Store. they reset and set up to restore a backup, what they did before. After she came back to the top, they said it would take some time to restore because I have a lot of apps, granddaughter, I went home to finish. It was two days ago. When I go in the backup, it says still iPad is restoration. Should I stop & then restore again? Are they redo the apps that have already been restored?

  Thank you, Cheryl

  Hi cgibson,.

  Thank you for using communities Support from Apple.

  I see that you are going through a process of restoring iCloud on your iPad, and it takes longer than expected.  The speed to iCloud restoring has a couple of factors, including the speed of your wireless network.  For more information on why this process can take some time and how to follow the process, please see below:

  Restore my device from a backup to iCloud takes a long time

  Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.

  There are several steps that follow:

  • In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
  • Make sure that your device is connected to the Internet with reliable WiFi.
  • Make sure that your device is plugged into a power outlet.
  • Check the Apple progress bar that is displayed during the transfer of a backup.

  If you need help, restore your device from a backup to iCloud

  Have a good.