Radeon HD5450 video card will not work in Pavilion p7 - 1226 s

I have a Pavilion p7 - 1226 s running Windows 7 Home Premium. I bought a video card that is too powerful for her, a Sapphire Radeon HD 5450. Is this what can I do to use anyway? Its specifications require a 400 Watt power supply; mine is 300. There is also a PCI-E 2.1, and the Pavilion is set up for PCI-E x 16, so I think it's a lost for me cause. Well, any suggestions on the kind of maximum card I could get? These things are hard to understand! -Thank you, bayedo

Hello

Radeon hd 6570, I installed and it works without problems. I noticed one thing, it was that energy savings has been activated for (available on the advanced power settings) PCI slot. Could check you this? I turned options for saving PCI slot.

Tags: HP Desktops

Similar Questions

  • My ATI x 800 XT video card will not work with Windows 7.

    I have a pretty old AGP ATI x 800 XT card and it just doesn't work. I installed the last 9.5 drivers for 32-bit vista, and every time I launch the game it says that my drivers are up to date. I have windows 7 build 7100. Is there a way to make the update work? Is my card dead? What other ways can I measure the problem?

    Hello Karizzma,

    Thank you for posting.  You can use the default Windows 7 video card drivers, because ATI has more new drivers that support your card.  Catalyst 9.4 and 9.5 drivers do not support your card.  They can't stand not mine and I have the Radeon x 1950 pro.  You might be able to try the old Vista drivers that Windows 7 will also use most of the Vista drivers as well.

    Please let me know if this helps you. Zack
    Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Installation for the new video card will not work. Message "Hardware not detected" what's the problem?

    Windows XP Home Edition. Motherboard ASUS P4PE. (Old) NVIDIA geforce4 TI 4400 failed - video card replaced by Prowler Radeon 7000 64 MB agp (Mad Dog). The black screen with the old card and bought a new one. At out the old card and installed a new.  Start the computer and graphics were. With Nvidia drivers installed, display settings could be changed. Device, 'Monitor' Manager showed now default monitor instead of good Sony monitor. Remove all drivers video and rebooted.  Screen "new hardware found" appeared, but I couldn't get the new drivers loaded. I inserted the disc by the manufacturer, but the pilots has not can be detected. Has attempted to launch "Setup" on the disc, but received a material not found error message. Yellow mark points to "Other devices" and the hyphen "VGA Display adapters". No 'monitor' in Device Manager. Tried to turn off the windows firewall and Virus software. I tried windows update. Still have a problem. What's wrong?

    The old drivers must remove the first test pilot seeper guru3d.

    The nvidia Setup program should find the material but otherwise download the latest version of the software from their Web site.  They must be the pilot, right down to the revision number, not only the model number.

  • Satellite Pro 6100 video card does not work!

    I have a Satellite pro 6100, but the video card will not work!

    Toshiba sells parts of the satellite pro 6100?

    Greetz, jeroen

    Hello

    As far as I know that Toshiba doesn't sells the parts directly and you can order it by the service partner authorized in your country.

  • Dedicated video card does not work

    I just bought a HP 200-2d03SQ laptop and install Windows 7 Home Premium (64-bit), and unfortuantely the laptop does not recognize the dedicated video card from AMD. When I install the driver for the video card, first of all, it detects I have the AMD Radeon HD 6400 when in fact I have the Radeaon AMD 7450 m HD and then when I install the driver, it is not recognized. In the center of comand, it indicates an error.

    Could you please help me? the video card does not recognize the video card only for Windows 8?

    Hello:

    This graphic driver should work.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110326-1&cc=us&DLC=en&LC=en&OS=4063&product=5280024&sw_lang=

  • On board video card does not work.

    I have a Pavilion a6150.uk machine, the embedded video is not working, will work with the card in the slot also, what I need to know what mothers are compatible with rev IBIL - THE 3.02, LGA 775 XUI, other machines HP that fits and is compatible with Itel Proccesor quad and other parts.

    Ok

    Well a new motherboard arrived this afternoon, not sure weather go ahead and put in, if I should I enter the graphics card this guy with the first, and some told me, you can reset the bios with on an image of the screen but he did not know how to do it with my pc with windows visa.

  • Inspiron 15R SE 7520 video card does not work after update Windows 8.1

    The internal graphics are Intel HD 4000 and the graphics card is a Radeon HD M 7730. After update for Windows 8.1 almost everything worked, except that it only uses the integrated Intel graphics card. Now, the resolution is not right and parts of the interface Windows look rather mediocre in comparison.

    What I tried:

    • Uninstalling the video card drivers
    • Reinstall the drivers for the video card in Dell
    • Install the latest beta drivers directly on the AMD website
    • Disabling the integrated Intel graphics card
    • Uninstall the Intel integrated graphics card

    So now what?

    Hi all

    After a lot of Googling, got this Dell website which has 8.1 Windows drivers for Inspiron 15R 7520 SE:

    http://FTP.Dell.com/published/pages/Inspiron-15R-se-7520.html#TopSolutions

    After having installed the drivers from AMD & Intel HD4000 for Win8.1 on the site above, blurry of the screen disappeared and catalyst works again!

    Please spread this link autour!  Very weird representatives Dell did not provide this link. Their advice to uninstall drivers / stop windows update does not help.

  • Video card will not be installed properly

    Hi, I have a HP Pavilion a6120n. I am installing a Radion HD 5450 video card (see links below for pc and a video card). I improved my diet to a LSP Ultra 750w and disabled the on-board graphics. However, regardless of the manner in which I try to install the Videocard (when running the pc or not), and reboot, my monitor says 'No Signal detected'. When I try to install the software for the video card from the CD, it goes through the complete installation process and says it's full, however, the file never appears in the folder it is supposed to. Basically, whenever the new video card is attached to the motherboard, the PC doesn't like it and I have no display.

    My BIOS version is 20/04/07. Can I change the video setting [PCI] or [on board] but nothing more than that, such as PCIE. Y at - it a new version of BIOS that I have not found?

    Should I look at a different video card?  It's a not compatible for some reason any?

    Any ideas here? I'm puzzled.

    Thanks a lot for your help.  Happy HP for this.

    PC: http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/12132708-12133156-12133158-12133158-12133158-80230663-...

    Video card: http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=149617&SRCCODE=WEBGOOPA&c...

    Well... Good and bad news.

    First of all, the bad news: after much searching through these forums I found a post of 2007, States that there are problems with the Radeion HD series graphics cards the user had the same problems I have and he wasn't able to use the card.  So although the specifications look like they work, the motherboard just don't like this series.

    The good news: I picked up a Nvidia GeForce GT 610 with essentially the same characteristics and plugged in today and I'm happy to say that it installed without any problems.  Apparantely, my motherboard is biased!

    Thus, everything works now and I'm happy with the Setup program.  I can't wait to test it more, but I wanted to make sure I sent my thanks for your support and the support of the other person as well.  I appreciate that you took the time to help me.  Bravo!

    Train

  • half-mini wireless-n DW1520 card will not work on the only G N

    I recently updated my internet connection to 30 MBPS to 15 with the Charter.  I ran a speed test with my Dell desktop computer with the Ethernet cable directly plugged into the modem and got a speed of decent connection, but when I use my router and Wireless - N DW1520 Half - Mini Card on this computer, the connection speed drop nearly in half!  It seems that the card will work in Wireless-G and not the faster Wireless-N.  Why is it and, if possible, how can I change this setting?  Thanks for your time.

    Hello

    Don't forget to convert Mbits in megabytes.

    Check this box:

    WiFi vs actual throughput speeds
    http://www.wifihowto.NET/WiFi-speeds-vs-real-world-throughput

    You must use N g would not work anywhere near as fast you see.

    G = 54 Mbps or 6.8 MB and real world 3.4 MB

    N = 300 Mbit turbofan 150 Mbps single stream or 37.5/18.7 MB and real world 18.5/9.3 MB.

    Interference, the distance and other environmental conditions may further reduce the speed WiFi.

    Thus, it seems that your WiFi becomes very good passage of double-flow N.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Qosmio F50 - 108 - Toshiba Flash Cards will not work with Windows 7

    Hello

    anyone tried to install Windows Seven? I tried.
    Everything works fine (Wlan, Lan, sound, etc.), but one thing is unable to work on my laptop: Toshiba Flash Cards.
    I installed the driver, and nothing happened...

    Any idea to solve this problem? Because I usually used it in Vista.

    Thank you and sorry for my English ;-)

    Hello

    The Toshiba Flash Cards has been designed for Windows Vista only

    Windows 7 is very similar to the Vista and many pilots could and would go with Windows 7, but in very rare cases certain tools would not fully compatible

    The Toshiba Flash Cards is not a driver; It s a utility that seems to be is not compatible with Windows 7

    Good bye

  • Satellite Pro A200, Windows XP, 4 GB SDHC card will not work.

    Hello

    I had a Satellite Pro A200 installed with Windows XP, SP2 for some time - no problem, a great piece of kit. However I have recently bought a new camera and splashed by a Kingston 4 GB SDHC card. The manual for my A200 to indicate seemes that it my laptop is compatible with SDHC 4 GB cards but when I push the card in the blue LED flashes and then nothing happens. My SDHC card does not seem to be recognized by the system.

    I see no error in the log of the events of my OS and I checked the slots operation in trying an old 512Mb SD card and works very well.

    Anyone can offer help please?

    For reference, this laptop is a PSAE4E A200 model.

    Thanks in advance

    Simon

    Try this fix XP to enable SDHC support

    http://support.Microsoft.com/kb/934428

  • HP pavilion dv6 6199ee video card does not work on windows 8

    Please help, I have a problem with the video card, it is always installed with error only on windows 8, but it works very well on windows 7, by the way I use the same driver in both!

    Hello

    If the graphics card in your laptop is AMD you can try this driver

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-112999-1

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) my video card does not work why?

    can u help me quickly?

    Hello

    -For how long have you had the problem?
    -Did you change your computer, after which the question began?

    I suggest that you uninstall and reinstall the drivers for video card and check if that helps.

    Uninstall or reinstall a device

    Note: Not applicable for Windows Vista also.

  • Qosmio F10-101: after change of graphics output d-video card does not work

    Hello
    I had a problem with my qosmio F10 and after service, changed the graphics card from Nvidia Geforce 5700 6600. But when I tried to switch the LCD for the TV screen, I could not use my d-video out (SCART nb exit). I could not change display properties TV format because these settings the value NTSC and shadow. You have an idea? How can I solve this problem before the service...
    Thank you

    Hello

    The G10 has installed the utility of development of Toshiba and this tool has controlled the TV out put and the PAL, NTSC settings.
    Check if it is available on your Qosmio F10 and change the settings if necessary.

    Furthermore, it would not be a bad idea to access the BIOS and check if there are any options that can move from a PAL, NTSC

  • video card does not work after upgrade to windows 7.

    When I upgraded to windows 7, my transformed into graphics Standard NVIDIA graphics card. I cannot access my media Center tv and can not play. When I update the graphics card through hp.com, my internet cannot connect.

    Update the driver for card video from this link.

    http://www.nvidia.com/download/index.aspx?lang=en-us

    mohanad

Maybe you are looking for