Radial withdrawal Point

Similar Questions

• I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

  I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

  There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

  If this does not help, contact McAfee technical support. They should help you.

• Removal of Photoshop Elements 9 caused missing lenses in Lightroom 3.3 profiles

  After the expiration of my essay on Photoshop Elements 9 I removed it from my Windows Vista system.  Next time I started to Lightroom 3.3, I tried to apply a profile of Canon lenses in a few new images as well as the profile was missing, not only it was not on the list, none 862 images taken with this lens had the profile that are applied more.  I tried to repair the installation, and he could not say that I was missing components.  Then I tried to upgrade to 3.4 RC & it failed with the same message.  Finally, I thought it might have been caused by the deletion of items in Photoshop so I went to restore it was the case before the withdrawal point.  Now I have the profile of the rear lens which doesn't have the profile of Canon EF28 - 135mm as well for other 862 images.  My question is should there be something else I should look to see if it is missing or damaged?  Thanks - Larry

  Larry,

  The common part between LR and PES is part of Camera Raw (ACR). Its parameters are contained in 2 different locations:

  (1) the general configuration cab files:

  C:\ProgramData\Adobe\CameraRaw

  This directory contains profiles of lens and camera installed with LR

  (2) user associated configuration files:

  C:\Users\[username]\AppData\Roaming\Adobe\CameraRaw

  This directory contains generally:

  • Downloaded/created goal profiles
  • ACR default (such as the size of the cache ACR, the default values defined in LR)
  • Camera downloaded/created profiles

  You can view the contents of these 2 sites. Another alternative would be to uninstall and reinstall LR, which should take care of the factory provided profiles.

  Gossweiler beat

  Switzerland

• McAfee Installer tells me to remove the radial point

  I just renewed my mcafee program.  When you try to install it tells me that there is an incompatible program-radial point.  He told me to remove the program and then try to install again.  I do not know is that one point radial or where to look to remove it.  Any suggestions?

  Hi RgAnthony,
    
  1. you use AT & T security software or any other security software on your computer?
     
  If yes then you need to uninstall it and check for the issue.
          
  Uninstall or change a program in windows. 
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
        
  Note: You must reinstall the security program again after reviewing the issue, to keep your computer protected.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Translate the focal point of a radial gradient?

  Hello

  Working from the great response in this thread, I'm trying to move the center point of the gradient of an object. Here's my test code:

  var idoc = app.activeDocument;
  var ipath =  idoc.selection[0];
  ipath.translate(
      100, // deltaX
      100, // deltaY
      false, // transformObjects
      false, // transformFillPatterns
      true, // transformFillGradents
      false // transformStrokePattern
  );
  

  Unfortunately, nothing I have try actually works.

  Anyone know what the trick is to place the origin of a radial gradient?

  Thank you!

  Why don't you use the code in the great response this thread?

  you left out some vital lines

  // transform gradients findings
  // select a path item with a gradient applied to it before running the script 
  
  var idoc = app.activeDocument;
  var ipath =  idoc.selection[0];
  var fillcolor = ipath.fillColor; 
  
  ipath.filled = false; // remove previous gradient transformations, to be able to apply new ones ?? 
  
  ipath.fillColor = fillcolor; // re apply the same gradient color, without transformations.
  ipath.fillOverprint = ipath.fillOverprint; // without this, the gradient won't move or scale, but it does rotate ?? 
  
  ipath.translate(
      100, // deltaX
      100, // deltaY
      false, // transformObjects
      false, // transformFillPatterns
      true, // transformFillGradents
      false // transformStrokePattern
  );
  

• I'm working on a list at several levels, and when my list gets to the two figures on the third level, he pushes the first line of the text beyond the point of withdrawal.

  I played a bit with the indent and spacing in the paragraph without result style. How to get to the line upwards again after this point or just change the withdrawal of this it is so every game, no matter what number he?

  Use a withdrawal left, like 10 mm for iterated section, then set the indentation of first line to 10 mm. (or 15/15 etc., depending on how much you need. Enter a tab between the number and the text in the first line.

  If you use auto-numbering lists, then typing a tab is not necessary, but also take a look at the left indent and the parameters of the line first indent.

• I have the latest version of Lightroom CC2015.  My problem / question is with the Radial filter.  The circle, PIN and anchor point are not displayed.  Ask for help via Chat told me to uninstall and reinstall.  This does not help / correct the problem

  Can someone hepl with Radial filter / circle, PIN and anchor point are not displayed.  Thank you

  Try asking your question in the Lightroom Photoshop Lightroom forum

• No pen or the control points lightroom radial filter 5

  No pen or the control points lightroom radial filter 5

  Press H

• Trackpad/point does not not after the withdrawal of the keyboard

  Earlier today I opened my T510 for maintenance. In doing so, I removed the keyboard. After all together, the trackpoint/trackpad didn't work. This includes the the * beep *-all the buttons of the mouse mouse and trackpad. The trackpad was not yet removed, but I guess that the data connection for through the rest of the keyboard (?).

  I took the keyboard several times to ensure that the connection is secure and verify if physical damage. There was nothing.

  The obvious thing to do here is to replace the keyboard and desperately hope that the problem is not with the connector on the motherboard, but the problem is enough strange (keyboard works, but not the mouse) thatI thought it would be interesting to post here to see if anyone noticed.

  Solved.

  As I mentioned in the last post, the trackpad connects to the motherboard through the cable labled as a speaker in the manual wire (this can be easily seen after removing the keyboard/trackpad of the machine Panel). There is a small latch to hold the cable in place at the end of the mobo. I had mixed the States secured and unsecured for this lock, which apparently broke the connection. That fixed now and everything works.

  It's probably point out expressly that the * beep *-the mouse on the keyboard and mouse buttons do not seem to be depenent on the trackpad is properly plugged in, despite a separate connection to the mobo.

• Droid Turbo could not connect the Cisco access point

  Greetings.

  Since the upgrade to a droid turbo, I was unable to connect to the network without wire of my work. I work in the it Department, but my experience with Cisco technologies and wireless is limited, so I tried to understand why. My previous bike x worked fine. We have a network of all the access points managed by a controller Cisco 4402 running version 7.0.98 of the BONES. I was able to connect to another wireless network that I could meet outside of work, and I am able to connect to the network of my work if I connect it is unsecured guest SSID. Only connections to our 4 secure networks fail. The controller reports that my phone cannot all simply to authenticate. The controller is configured for WPA2 / AES using a key 284 on the particular network, that I am trying to connect. I entered this key manually both via copy and paste. As far as my phone goes, I only tried to withdraw and time networks like tent to start it in safe mode without success. I read on various forums android that maybe it's a problem related to Kit Kat and this kind of problem has appeared on other handsets from other manufacturers, but nothing definite.

  Any suggestions would be much appreciated.

  -Josh

  Let me direct you to two other discussions here on the Droid Turbo forum and the other from Cisco which may help.

  Unable to connect to company wifi

  https://forums.Motorola.com/posts/af633eb3e4

  DROID WiFi Turbo questions

  https://forums.Motorola.com/posts/06a2f3c5ca

  Connectivity issues with Cisco and Moto X (Gen 2) allowed RMC controllers (probably related)

  https://supportforums.Cisco.com/discussion/12331486/connectivity-issues-Cisco-controllers-and-PMF-enabled-Moto-x-Gen-2

  I hope this helps!

• Best approach for the design of the Radial Image - sector scanning Sonar

  This is not a problem, but you are asked to think about the best approach.

  I need a sector sonar image data.  This device runs on 360 (degree sub-segments) and generates a set of data from the origin - radially outwards at an angle of no - to an endpoint.  Therefore, for each 'ping' sonar I need data points in the center of a circle graph, a radial angle on the outside.

  I don't know if I should use LabView vi for the drawing tools, or go to ActiveX or?

  Anyone has a suggestion on the best approach to this?

  Thank you
  Peter

  Peter,

  You can use a chart of the LabVIEW intensities for this kind of display.

  Maybe not the best way, but it is possible.

  As an attachment, I did an example with your specifications.

  datapoints 1024 by degree

  See example image:

  

  Basic principle:

  -Create the matrix of 2048 x 2048 points database

  -For each 'line of angle' calculate which pixel to replace each data point in the line

  -Because "datapoints" becoming bigger, far from the Center, repeat the action for several "sup angles. for example, to 85 deg also Calc. 84.6, 84.8, 85, 85.2 85.4

  It gives you an idea of the possibilities, but performance may be necessary.

  -Only external Calc x pixels more degrees

  -Do some kind of anti-aliasing to avoid the pixelated lines.

  See attached example. (LV 8.6)

• Convert image in a table to a radial dimension

  Hey everybody,

  Thanks for taking the time to look at it.

  Here's the question, the code, I'm running works, but I think that it is possible to run faster, I'm not sure how to rewrite the algorithm to do this. I take a picture (seen on the page, the top left figure) symmetrical around the center point. What I'm trying to do, is to collapse all data in this image into a one-dimensional array, which is a radial representation of this image (screenshot, figure in the top right panel). The code that I currently use is illustrated in the figure on the bottom. Subtly which could lead to confusion is the multiple by a factor of 4 in the middle of the code, it was here when I started programming, and I guess that's a scale factor used to kind of spread on several elements of the array data in the table of dimensions a subsequence. As you can see code works effectively, but on average, this operation works on a 56 x 56 px image, so the code must run 3136 times and I don't think it is of the most effiencient way possible, the code takes about 1 ms to run for an image of px of 56 x 56 on our machine. Please let me know if you have any suggestions on how to speed things up, it's half the neck of the bottle for our analysis in real time!

  Thank you

  Joe

  jowparks wrote:

  Hi Bob,

  You have the right idea, which would give us a version of the radial representation. The problem is that if you only use this row of pixels, you take almost all your image data. The radial profile resulting will be extremely noisy compared to the case when you use all the image data to generate radial representation.

  Thanks for your help guys, I feel that there is a way to rewrite the algorithm (entirely) to make this thing run a lot faster than it already is, but I'm just at a loss on how to do it.

  Joe,

  Good point.  This is so how have your Pixels and them, eating too much.  Am I right that you know the coordinates of the center of the Image?  For more convenience, I'll call these details O (for "origin").  I'll also want representation radial distance R (in pixels).  Note that the coordinates of O do not necessarily need to be whole - he may fall "between the pixels.

  Here's what I'd do.  I guess it would be just as fast and precise as possible.  You basically want to use all the Pixels to come with an array of "average intensity" R + 1 (instead of using the example of the x-axis as I suggested).  What you want to do, is to get the average of all the distance pixels 1 from the origin, the average of all the distance of 2 Pixels, etc.  What a pain!

  We therefore reverse the problem.  Take all the Pixels and calculate their distance (rounded) o and include them in the calculation of the average.  Oooh, how?  What I would do, is to create a table of R + 1 of queues to contain the Pixel values.  When you look at Pixel-x-y, at the distance r from O, enqueue the Pixel value in the queue to index r (you know the Pixel if r > R, of course).

  When you have treated all the Pixels in R of O, you of R + 1 queues with intensities of Pixels at the distance r of o.  Just replace the lines with a picture of the averages of each queue.  The fast way to form the average of a queue is to clear the queue and retain its contents (in a table), then the table on average.  You now have used all the points in the Image, (b) take account of its distance from O and (c) calculated averages improved S/N and you have done quite effectively.

  This should be easy to code and fast to run (I'll bet a dime it will beat any other algorithm proposed in the next 24 hours...).

  Bob Schor

• same function brings a different number of points in the various calls?

  I use an automated test program, tests of mobile pistons. The test will extend the plunger and collect data of position through a few pots and the current data when moving. He will then go to the piston, and make the same data collection. Then, he makes other tests. The data are written in files and are then retrieved for after the treatment trials later.

  I use the same function for the extension and retraction, and I notice that the number of points of data collected during the measurement is always much less than the number of points collected during September.

  It's the 3rd version of function, I used to collect the data of the test apparatus, and this question has stuck with all 3 versions. I joined the service in this post. First level VI is large and contains several screws at a lower level, so I can't understand all of this. I use a USB-6008, LV8.5 Daqmx 8.5.

  Any ideas why this would be different each call?

  Explanation of the function:

  The shaded area VI with 'NOR' is a Subvi, which communicates with a controller for the tester. He sends the position to move the piston. In the loop, the daq assistant grabs data from the 6008 and examines the values of pot. If the values are close enough together, several times, it stops the loop and data collection (the piston has reached the end of its run). After the loop of data collection, the rest of the service is to write data to a file.

  NOTE that only the case 'true' inside the while loop questions here, because that is where the rub.

  PS. Sorry the front looks like crap, because it's a Subvi to its façade has ever seen.

  -SK-

  I think that the culprit is the DAQ Assistant.   I suspect that the first time you call the DAQ Assistant (this will always be in the course of an extension) it takes some amount of time to get the task configured and started.  As the piston is already running, you then have less time to take samples.   When you make the withdrawal, the task is already loaded into memory and can begin to collect samples immediately.  You should get your task daqmx Installer and started outside the while loop before starting to move the piston.

• I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points.

  I have windows 7 os. a virus ripped through my registry and pulled out of the recovery points. Removed the hard drive to retrieve data on the device of the black widow on another computer, but cannot access the data due to password protection. How do my stuff? I know that I have to wipe the drive and start over, but I want my files first. I can see them working with the original BACK on the laptop, but they can't get out.

  Hello

  You posted in the Forums of Windows XP if you say you have Windows 7 so be careful
  When you enter your Questions.

  Answers - Forums of Windows 7
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7

  ---------------------------------------------------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware.
  See http://www.microsoft.com/protect/support/default.mspx for more details. For international information,.
  see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems with radial filter / adjustment lines error

  Hi all

  I use the paper version of LR 6 (not CC) with more returned updates provided by Adobe (6.3/6.4 or GREATER).

  My focus is on the landscape image editing, so I need the radial filter often enough.

  Here's my problem:

  When I use the radial filter, the effect is applied to the image, but the lines of fit & points appear not at all?

  This is why I can't adjust the radial filter. The program has a bug or I can it turn somewhere? Otherwise, the radialfilter is useless - pretty bad when you pay a lot of money for an original version of LR.

  Thanks for your help

  See you soon,.

  Philipp

  

  Press the 'H' (for 'hide' (H) button to toggle the contour of the filter. Press the "O" (for "overlay") to activate or deactivate the mask overlay.

  BTW:

  "the more resent updates provided by Adobe (6.3/6.4 or almost).

  The most recent update is 6.7.