Trackpad/point does not not after the withdrawal of the keyboard

Similar Questions

• Pavilion HPE h8 1103nl does not recognize the keyboard & mouse

  After 10 days of installation, copy and all that kind of stuff that comes with a new PC, everything worked, and finally, I put everything in place, put the wires out of sight and all. Of course, I had to sign a few things, and somewhere in the process of electricity is out. Well, the PC was off anyway (at least I thought it was. I also changed the USB port to which the keyboard and mouse were attached. When I turned on the computer, I had a "keyboard" error, could not start (because electricity had come off the coast), but as the PC does not recognize the keyboard or the mouse, I was unable to give a or something.

  Keyboard and wireless mouse tried again, also under the old, but that didn't work.  Tried to reconnect, but in vain.

  Now what can I do?

  Hi HardBeatZ

  Thans for your answer!

  I found the solution, after trying and try... but could not find my ad more (duhhh), so thanks for the answer!

  Apparently I did ' t hold the button "connect" quite a long time to make a new connection... :-(

  Everything works fine now... Thanks again!

  Mijni

• See character key does not work the keyboard.

  original title: keyboard problems

  the

  @ button will not work unless I have copy and paste the table of characters, but then on the odd occasion does not work. Why is this and can I do about it?

  Hello

  1. What is the serial number and model of the keyboard?

  2. is the specific question of the @ key?

  3. have you made changes on the computer before this problem?

  For general information, to obtain @ key on keyboard, you must press shift + 2 buttons on the keyboard at the same time.

  Check if it works fine with the keypad.

  http://Windows.Microsoft.com/en-us/Windows-Vista/type-without-using-the-keyboard-on-screen-keyboard

  You can also check if the problem is keyboard or does not connect the external keyboard.

  Also: check if the keyboard input language is defined accordingly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-input-language

  I suggest you to fallow the below methods:

  Method 1:

  Run the fixit available in the link below and check if that makes a difference

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

   

  Step 1: Check in SafeMode with network.

   

   

  You can also check if the problem persists in safe mode with network and check.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If the key on the keyboard does not work, then fallow step 2.

   

  Step 2: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• Trackpad which does not and the custom will disable the macbook

  I was watching netflix on my macbook air ive had since August, and suddenly the mouse trackpad responds more in which I mean the mouse does not appear on the screen. So I tried to turn it off, but it says 'preferences interrupted system shut down. I can not turn because the mouse does not move or show. Earlier, it was ok.

  Quit, forcing the abandonment of the system preferences, or turn off the Trackpad. Stop (power off). Power on the Trackpad and start the computer.

• Digitizer does not, after the update to windows 8

  Hello

  I bought myself a x 201 tablet a few months back, because I thought it would be great for taking notes during my studies. And I was right

  But after I upgraded my windows 7 to windows 8 when it was released last Friday, my scanner will not work correctly. It seems that the stylus is not really recognised as a pen. There is no pressure at all sensitivity, and clear with the back of it does not work either. It seems the wacom drivers aren't there.

  I tried to download various drivers for it and set up of the digitizer, but nothing seems to do the trick.

  Hope someone can help me, because I really need to be able to take digital notes soon.

  Back to the page of Wacom and download the scanner driver:

  http://www.Wacom.com/en/support/drivers

  Select tabletpc and win 7.

• Does not after the resumption of the hibernation

  Hello. I have laptop very slow and unresponsive liked after the resumption of the hibernation. It lasts up to 15 minutes after the resumption and the HDD led is lit constantly during this process. It's a much slower RESUME that my very old laptop with Pentium M processor and hard drive slow 540 RPM.

  What can we do about it.

  Laptop: Lenovo X 220, core i5, 8 GB RAM, 7200 RPM HARD drive. Windows 7 Pro x 64.

  I have a kind of guess the reason - a lot of RAM on x 64. Hiberfil large file. BUT I do not notice this behavior on any computer I've owned or worked on. That they can resume more slowly or more quickly, but after the restart they are responsive as they where before hibernation. I'd rather have it on the laptop too. This laptop isn't, she continues to make the reading of the HARD drive making it absolutely unusable during the process of tis.

  Thank you.

  Thanks again.
  The process that caused strange behavior has been PWMTR64.dll which is a ThinkPad Power Manager background service. Turn it off solved the problem. Resume from Hibernate is normal and all programs are loaded immediately after the resumption. Haven't noticed any decline in the power management feature after the deactivation of this startup item in msconfig.

• The mouse pointer does not follow the new path

  I use an invisible mouse and using a copy of the first slide where the mouse appears to set my position of mouse to the next slides.  My frustration is that while the path of the mouse indicates the correct path (as prescribed by the invisible mouse on the short blade) the mouse on the next slide does not move, it just stays at the final location at the end of the path.  What I am doing wrong?

  I'll give it a try.  I thank very you much for your time.

• Control does not after the exit of the loop of event handler

  My application brings together several controls user input.  When the user presses the OK button, it exits the event handler and the treatment.  During the treatment, it is not able to read the new values of the controls.  And in fact is no longer meets the stop button.

  When executing the attached VI, you will find that you can press the button of the switch and the LED indicates the status of the switch (this is my input from the user).  Now, press the OK button.  If you press the switch button, you will see that it works only once.  In addition, the stop button unresponsive to user input.  If you do not press the button, the stop button will cause the 2nd loop exit.

  Why the 2nd loop is unresponsive to the switch?

  It is a simplified version of my application in which two loops are separate from the States of my state machine.  There are several other States as well.

  The case of the event of the "change value" event has the property set to lock the Panel before the VI when the event is raised until the case of the event is over.

  Because the left while the loop is running not but the structuer event is always active FP everything is locked.

  Uncheck this option in the "edit event".

  Tone

• Vista does not START, the keyboard does not work.

  My power went out and when I turned on my PC, it says that the keyboard is disabled. I can't boot without a keyboard menu.

  I put the Vista Home Premium to reinstall disk in and nothing changes, it's still a black screen that says that the keyboard is disabled. The USB ports have power to them, and the keyboard works.

  Does anyone have an idea?

  Thank you!!

  Stu

  Hello

  Yes the data can be easily removed from the hard drive, unless he too missed it, by putting the
  hard disk on another computer as drive 2 or a later version, or using an external USB drive
  case. One of these methods would be that data can be recorded and/or saved. Of course
  This computer can possibly be repaired and which should not affect the data on the disk.

  =============================================================

  Good surge protection works, cheap energy bands are not.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• First cc 2014 pro does not show the keyboard shortcut

  I tried several times, but the first does not show me the keyboard shortcuts window.

  Any idea?

  I'm working on an imac 27 (end of 2011) with 16 GB of ram, i7 and osx 10.7.5

  Hi marco,.

  MAC OS 10.7.5 isn't an operating system that is supported for the version of first Pro CC 2014. So, I propose you to update your MAC to 10.8 or later.

  http://helpx.Adobe.com/Premiere-Pro/system-requirements.html

  Kind regards

  Vinay

• photo editor app now available, but does not, after the last new update

  Hi all

  strange experience that I wanted to stress with you all.

  I just had an update (this morning) to What's New build 3.0.A.0.2

  After you install this hotfix / update, then told me that "editing" is available for download. Build is 5.0.A.0.12

  I'm worried I have not had this app on my phone before - archive system applications reveals this is a new installation, rather than an update of an existing application.

  Also, I did not how to make it work, because there is no app on my home screen shortcuts. The app is not visible in the drop-down list app (when adding new items to my homescreens) either. Nor is the application in the list of main application (accessed with the key 6 points to the center of the permanent Panel shortcut on the home screen).

  I even tried to use a very useful app "quick shortcut maker" and even if I find photo editor in his list of activities, when I test the generated shortcut, unfortunately, I get "the photo editing software has stopped."

  Any ideas?

  I have a few apps disabled, so made photo editing have known all the dependencies?

  EDIT: I tried erase the photo editor and don't restart - no change.

  See you soon,.

  Gary

  Hi MyAliasIsGary

  Photo Editor is a system application only, it can be used when editing photo app to your Album or Photo. For example, if you go to Album > tap a photo > press the bottom icon that looks like a pencil on paper > Photo retouching tap.

• Skype logging does not after the update: no connection?

  Same question but Skype update itself and after that do so won't save as it says no connection... and Yes, I have a great connection... sigh...

  This message was transferred from its previous location to create his own new topic here; his subject and/or the title has been changed to differentiate the position of other requests for information and to reflect the content of the post. A link to this message appears when the post was initially added.

  I think that Skype will not often connect after update, goes just round.

  I right-click on the icon menu, I chose to LEAVE SKYPE.

  I then open Skype again and it connects without problems,

  Quirky, but true!

• Apps not showing Panel does not after the installation of new

  Hej guys,

  I changed the computer today and installed creative cloud on it. I can connect and all goes well until. But I can not install all the apps in cloud creative, the applications Panel will not appear, and any time I click on 'install adobe apps.

  nothing happens. Someone at - there a solution to this problem?

  I tried to rename the database in order to get a new one, I tried the cleaning tool, I ran it under administrator privileges... I don't know what to try anymore.

  Thanks in advance

  Alex

  (Win 7, lenovo W541)

  Hi Alex,

  Please refer to the threads below where this issue has been addressed:

  CC for desktop computer has lost the applications Panel. How to fix this?

  Missing Creative Cloud Desktop applications tab

  Re: creative cloud computer desktop is not displayed Panel apps?

  Kind regards

  Sheena

• On my trackpad scrolling does not work after the upgrade to 12.0

  On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

  Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.
  
  Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • http://KB.mozillazine.org/about:config

• After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but not joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing work

  After you have installed Windows 10, I can no longer create a PDF of my program Pagemaker 7.0.1. Purchased Acrobat DC, but still no joy. Apparently, Acrobat PDF maker does not recognize the .pmd extension. I get errors and various suggestions, but nothing works. WHAT?

  Print to Adobe PDF? Why the * & ^ * & ^ V_ $ didn't pay a lot more money to Adobe for an Adobe program that does not work with another Adobe program? Oh, right--they want to move me up (buy) the new Adobe graphics programs. I'll keep sweating this point and will no doubt wind up forking over a thousand$ $$ or so for 'new' stuff I don't need.