Radio control

Similar Questions

• I installed a USB device to a radio control. I have a total control, but cannot activate the audio in and out via USB

  I installed a USB device to a radio control. I have a total control but fail to activate the audio in and out via the USB port. The device does not appear on audio routing options (left click on the logo of the speaker), any ideas please?

  Tim, first read the whole message!

  (This after below is complete) Remove all usb drivers and charging system leave, after reboot, make sure that the item in question is connected before the reboot.

  Follow the steps 1, 2 and 3 below.

  1: make sure you use Win7 SP1 and all updates are current and responsible.

  2: after insurance above, go to Device Manager and remove all THE USB drivers. Don't worry, it will reload.

  3: reboot then System Device Manager will research and required load all the drivers.

  He must find all the items. If it does not investigate that in question is Win7 really compatible, 100%.

  If 100% Compat. with Windows7 should find!

  (Also make sure that the automatic Windows upgrade and install is enabled for software and hardware drivers)

• Cannot install the aircraft radio control of Great Plains Software called NexStar EP edition game

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I just got an airplane remote control for Christmas.  Flight Simulator software is not compatible with Windows 7 and I can't load or find an update of the program.  It's excellent plans software titled edition NexStar EP.  Someone has ideas of how to do to solve this problem without title to the store?

  Hi Farmun,

  Thanks for posting your query in Microsoft Community and congratulations for your Christmas gift!

  As the game is not compatible with Windows 7, you can try to install the game in Vista/XP compatibility mode and check if this solves the problem.

  To install the game in Windows XP/2000 compatibility mode,

  a. right-click the installation file, and select Properties.

  b. click on the compatibility tab.

  c. in compatibility mode, check the run this program in compatibility mode for: option.

  d. Select Windows XP (Service Pack 2) or Windows XP (Service Pack 3) or Windows 2000 in the available options.

  e. click apply and OK.

  See the link below for more information on compatibility mode:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Wireless Radio control does not turn on

  Recently my wireless Radio switch was turned off at startup and when I pressed the Fn with F5 key I received this message

  "The hardware wireless radio switch must be in the position to use wireless radios.

  Now, it was the main features, I have used in the past to turn on the wireless Radio - I had a few opportunities in the past manually disabled to save juice - and he wouldgive me a window with the option to turn away but now just the message above.

  Device Manager indicates I have a processor Intel (R) PRO/Wireless 3945ABG Network Connection #3 and its status is working properly.

  Any help would be most welcome

  There is a mechanical wifi switch on the lower bevel on the edge toward the Center.  With portable vertical slide switch to the right until the Green appears on the switch to turn on the wifi.  You may need to restart for the Fn 5 button to work.

  Here's a url that indicates the location of the wireless radio switch:

  http://support.Lenovo.com/en_US/product-and-parts/detail.page?&LegacyDocID=MIGR-67825

• How to make a group of horizontal Radio?

  Hello

  My problem is that I want to do a horizontal radio button group. I am unable to do a horizontal group. CVI only allows me to make a vertical radio buttons group. I need help to make a horizontal radio button group. Thanks in advance to anyone who can help me in this.

  Kind regards

  Farhan.

  CVI is not a horizontal group of Aboriginal radio control. Radio toolbox group control is developed on a tree control, and that's why he has a vertical extension. As you have noted, it is impossible to change his appearance.

  However, you can mimic a radio control group using a set of radio buttons and a few lines of code. I made a small example for you help develop such layout: note the use of an array of control IDS, in the coding of the simplificate.

• Structures of the event, radio buttons and the property disable node

  Hello

  I have a very simple VI intended to simulate what I'm trying to accomplish in my program... in fact, when the 3rd option button is selected, I want the text box is disabled and grayed out.  Instead, the case of the event seems to perform the action on the * next * the iteration of the loop.  Can someone tell what I am doing wrong?

  Thank you!

  The terminal of the radio control is inside the case of the discipline concerned.

  (.. .or you can read the new value from the data event [NewVal] node instead if you need the Terminal also).

  Currently, it is read immediately and the value placed in the tunnel. When the event is triggered, the expired value is read from the tunnel.

  Once you pass the terminal in case of the event, it reads only after that the value has changed, and you get the current value.

  Also:

  • You also need an event for the button stop, otherwise the VI cannot be stopped easily.
  
  
  • You have the same property node in any of the structure of the case. Put it down after the structure of the case and one is enough.
  
  
  • Things that are different are inside the structure of the case.
  
  
  • You can combine the cases that are the same (not the default)
  
  
  • You can remove the case of timeout.

• Fixing Sansa View to Peugeot RD4 or WIP Sound radio

  Hello

  I can get a box of "usb" to allow my car radio not only listen to music from my MP3 player, but also control using the radio controls. It does this through the usb port, or the connector series iPod. The documentation states that for all this to work, the device must be iPod generation 5 or later. My question is, since I can't find no reference to this in my sandisk manual, is the point of view of sandisk compatible?

  Thanks in advance

  Jack

  I know it seems strange, you meet yourself, but I got a response, if anyone is interested.

  I went to the concession peugeot, with my opinion and the usb cable and plugged into a car that was equipped with usb box.

  I am very pleased to announce that worked - it is from or the radio/cd controls on the steering column of the stem.

• Change list Radio to drop shipping?

  I have USPS shipping facility. It lists the options a bit like radio buttons. Is it possible to change this to a list drop-down list vs radio?

  Hello

  You can hide radio USPS options, create your own menu drop down with the same values and ID option named as usps radio controls, a script to adapt the choice of users with the USPS on presentation.

  Kind regards

  Alex

• Achieve an image based on Radio button selection?

  Hello

  I created a movieclip which is simply a question and the user chooses from a list of option buttons

  I created this and it works fine, but I can't understand how to set up a button "Next" or "Submit" button that, according to the choice of performed radio button, the user accesses a specific image or label.

  I bought the Adobe Flash CS5 bible, but it seems to be little information on Radio control buttons, only how to put in place to test.

  any help would be grateful.

  Look at the the RadioButtonGroup class selectedData property.  You can probably use that in any function call so that you use the property of the value assigned to the RadioButton selected.  The property value you assign to the RadioButton (s) can be different picture that each would end by will.  So in your event handler for the button function send, you can simply use something like: gotoAndStop (radioGroupName.selectedData);

• USB plays is not in the car after that put 9.3.4 at level

  I have an IPhone 6 and own a 2010 ford fiesta.

  After upgrading to IOS 9,34 I can't read podcasts or music through the car radio with USB cable, radio do not even recognize the phone is plugged in, although it will charge the phone and play via Bluetooth. and all the phone features work very well.

  It worked fine before the upgrade and the desire to return to the use of usb cable because it it allows to use the steering wheel radio controls.

  Ford blame Apple an Apple accuses ford. I had updated the firmware made by ford dealers.

  seems whenever apple do a update it fucks things up

  Sometimes an iOS update breaks compatibility and you will have to wait for an iOS update or a firmware update for the system of ether.

  However, try the following:

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the car.

  -Go to the support site for Ford and see if they know anything or if a firmware update is available for your car

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

• Satellite B3204-L35W-Click2 screen touch/HID USB driver is missing.

  I really just need to know where I can re - download the driver, because it seems that it just does not exist on my computer more.
  If I go into 'Tablet PC Settings', which I can only do via a shortcut on the advice of one of the guides, I found, I created, I get "no pen or touch input is not available for this view.
  "In"Device Manager", I have the following:" GPIO buttons Driver ', "Dock Mode indicator Driver GPIO", "laptop or slate indicator driver GPIO", three "HID-compliant consumer control device", "HID-compliant system controller", HID-compliant wireless radio controls ","I2C HID Device"," sideband GPIO injection device buttons "and"Toshiba Hotkey Driver. "

  I bought the tablet to the United States before settling in Hong Kong in February 2015. I do not use the touch screen than that, but it's still very frustrating. I prefer not to do a system restore because I didn't create a restore since July-ish point.

  There is no driver. It uses Microsoft built in the driver.

  Go into the BIOS, if the touch screen does not work in the BIOS then it's a hardware problem.

• HP 15-d017cl Notebook PC: not found wireless device. No seriously, as * gone * not found.

  Earlier today, I was using my computer to access the internet (was simply looking at Facebook, nothing special) and suddenly my computer crashed.  He had a quick error on a thread in the driver or the device or something like that.  When the computer is restarted, option wireless connections would not pop-up, just ethernet.  So after a lot of Troubleshooting Wizard and pressing this button small adapter wireless without success (the red light was on it all the time, which is routinely), I checked the settings, but while the 'airplane mode' section is very well and has the small cursor to activate, and devices 'Wireless' below says "we found on this PC wireless devices."  Well, of course there should be some.  I tried a bunch of things:
  
  -Went to the Device Manager and clicked on network adapters.  RealTek PCIe FE Family Controller is the only element here, I take it is the connection to the local network, as is anything that works.  Under Human Interface devices, he has HID compatible wireless radio controls and driver HP wireless button.  They are both updated and according to the properties, work correctly.
  
  -Use Windows Update to check for updates, install and reboot.  Nothing new.
  
  -Use system restore to go back a few days.  Nothing new.
  
  Next option I could think would be to restore the driver of HP wireless button (HID-compliant doesn't have the option), and if it does not, an another system restore or reset.  I hope not to have to do, because it's going to take a lot of work and a shopping spree, I have all the pictures of my two years since he was born as well as a whole bunch of programs, not what I think I have the program CD for more (my husband had some items stolen awhile back).  I'd love for more suggestions, I've been working on it for several hours and my brain hurts.

  Hello

  Try to update the Bios and the last pilot wireless from the HP website.

  Where you're comfortable, reinstall the wireless card once to the back side of the device. If these two options do not work, I would say to replace the wireless card as it is may be defective.

• lost wifi interface

  My laptop HP (15-n224sa, running windows 8.1) has worked fine since I bought it in the month of April, but last Sunday he suddenly lost access wifi and I struggled to restore it since.

  Initially I tried to use the built in convenience stores Windows and HP & diagnostic tools, but that anywhere my
  actions and controls are as follows:
  -In network connections, I can see the Ethernet and WiFI adapters, but the WiFi adapter is disabled.
  -J' tried to activate the WiFi card and get a message 'enabling', but nothing happens.
  -J' uninstalled the adapter and restarted in the case that forced Windows to recognize it but no joy - the WiFi adapter
  is reinstalled, but can not be activated.
  -J' tried to reinstall the driver, but just get the message that I already have the latest version of the driver
  -J' updated the bios, more in hope than anything else, no joy.
  -netsh wlan show interface gives the message "there are no wireless on the system interface.
  -J' tried to use a wifi dongle, but who has the same problem.
  -J' have tried restore to the last point of restoration before the problem started, but who do not have and I don't know that it would be
  have solved the problem.
  -Autoconfiguration WLAN service is running.

  Ethernet access still works, but it's a pain using a wired connection.

  Laptop is a HP 15-n224sa, running windows 8.1
  1.80 GHz processor Intel Core i3-3217U
  Realtek RTL8188EE 802.11bgn Wi - Fi adapter
  HID compatible wireless radio controls
  HP wireless button Driver

  Any suggestions please?  It seems that I have "lost" the wireless interface?  How can I reinstate that? This could be a physical problem rather than a pilot / configuration problem? If so, how could prove that?  Thank you.

  Well, I received the replacement wireless lan card and installed.  Turned on the portable, full of anticipation and, still had the same problem.  Called HP and they said that, as long as it is not a plug ' Play device, I had to use HP Recovery Manager to restore the machine back to factory settings and then it would recognize the new card. This means taking backups of all the data on the laptop that this is deleted.  A bit of pain, but did this and I now have a WiFi again.  However, I can't say if the original wireless LAN card was really bad in the first place (and I won't be back to try) in which case the system recovery could have resurrected the wifi in any case, but it's a drastic thing to try. In any case, thanks to HP support Office for their help, I now to reinstall all the software I lost by making the system recovery.  If anyone is interested, here is the link that HP gave me for the recovery of the system, but I'm not sure its applicable to all HP Laptops:

  h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03489643#N179

   

• Application builder appears complete but does not create executable not

  I'm working on a major project (~ 5000 screws, LV2011 SP1, Win7 32 bit) and have recently from problems with the Application Builder. This is after 3-4 years of success is based on this project...

  When I try to build my application of following higher level occurs:

  1. "build status' window opens as usual and starts the processing of my file:

  

  2. Subsequently, the progress bar reaches about halfway and the message becomes "Compilation."... » :

  

  3. then the progress bar jumps sharply at the end and the message becomes "Save...". ». In addition, the 'Done' button becomes active, as if the build is completed. The window remains like this for always. Notes on this dialog box:

  • The 'Explorer' and 'Help' buttons work normally in this State.
  • If I press the 'Done' button (or close the window with the Red 'X') then the window closes but Labview is suspended. The only way out of here is to kill the process in Task Manager.

  

  4. If I sail in my generation folder so I see temporary build files are still sitting here, i.e. the manufacturer failed to create my exe...

  

  When I turn on logging, I see that all the files seem to be treated successfully (in comparison with a previous successful build log), but the paper stops before writing the article ' [output file Version]]... ".

  Anyway - I'm trying to restore a large number of small changes to see if I can isolate that my changes of code causing the problem.

  Someone out there knows what could cause request the manufacturer to get as much as he does, thinking it's done (even if this isn't the case)?

  Thanks for all the ideas...

  Well - I finally managed to isolate the problem... Corrupted code is attached!

  
  

  The attached code is a version of a dialog box that is used in my project. The question turned out to be associated with the order by radio inside the tab control:

  • If you open the library and then try to REMOVE the two controls private library (simultaneously), then you are greeted with the accident below report. NOTE: Remove the private items one-at-a-time does not cause the accident. (weird...)
  • The same happens if you try to rename the library

  

  The solution:

  • The inclusion of this library in my project was originally my application build will fail every time.
  • Given that the report mentions "RadioClust.cpp", I made the amazing jump that the question has been connected with the radio control... so I just unplugged all instances of this control their typedef. That seems to have fixed!

  ASIDE: I have not checked if including this library in a different application will cause his generation to not too... Something to try out a rainy day!

• Scosche Bluefusion Interface module

  Please bear with me. I came to a 3 g iPhone and before that, I had WM 6.5 on an AT & T tilt, so I'm really new to Android. I am happy with my ATRIX.

  I have an iPhone/iPod connector that allows me to listen to music and change the track using radio controls and factory driving in my car. Obviously, it's a paperweight now, so I'm considering the Scosche Bluefusion module:

  http://www.Amazon.com/Scosche-Bluefusion-interface-factory-hands-free/DP/B001TL2P0C/ref=sr_1_23?s=au...

  Who should, if I'm reading this right, give me stereo A2DP streaming my music and I would take the phone calls as well.

  The question is, can I expect to get along with my ATRIX?

  I contacted Scosche and they said that everything should work exactly as planned, as long as I have a certain stereo installed in the car which was available from the manufacturer, what I'm doing.

  Thus, on their word and impressive return policy for Amazon, I ordered the parts!