Cannot install the aircraft radio control of Great Plains Software called NexStar EP edition game

Similar Questions

• Cannot install the full features HP Photosmart and Officejet software

  Product: HP Officejet 7210 all-in-one Printer

  Windows 7 64 bit

  The system cannot find the file specified... hpzprl40.exe

  The printer has a connection wired ethernet to the router.

  The laptop is connected wireless to the router.

  Thanks for your suggestion of Gordon. I must confess that I did not. (If I don't check the 'Resolved'.) However, for the record, I will describe my workaround solution.

  My goal was to scan photos. To do this, I need the HP, but not all of the characteristics recommended solution Center.

  So I tried to install the HP Solution Center. Ugh! It says it's over, but when I tried to run, he says that the installation was not complete. I found a solution on the Forum who basically said to uninstall the printer, carefully clean and reinstall. (More details in this response from forum). Unfortunately, it did not for me either.

  Which does not finally was to install Imaging as well as of the solution Center. (And I did everything that uninstall and cleanup still too). I suspect that Solution Center has a dependency on the imagery, but this is just speculation.

  Even if I did not follow your advice, thanks again for your suggestion. I tried your recommendation then even if I hated the thought of reinstalling all my other software.

• Cannot install the driver/software package

  HI (sorry for my English, I'm a Spanish speaker).

  I have an all in a psc 1315 and cannot install the software/driver from the site in a new 32-bit Windows 7 PC.

  I tried everything I could find in the forum and on the outside.

  I downloaded the driver from:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=ES&CC=ar&DLC=es&sw_lang=&product=3745...

  and it can run fine.

  When the instalation starts fine, after the license agreement, when the installation is always "system analysis", he shutdow. Close the installation without an error message. Don't just run the next step.

  So I can't install anything, can not get the HP Solution Center and other software for analysis.

  Is not the antivirus, I tried to close the shields in time, not if.

  I guess the Installer (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) in the site's just failed.

  I extraxt .exe files and tried to install the Solution Center in the "setup" folder inside, don't let me do. And it has a lot of files with configurations of software I don't know what I need those.

  Can I connect the printer without the software, while adding in windows and it works for printing and browse the WIA, but in this way the "Scan" button on the HP psc 1315 do not work.

  Hello

  Still, the installation problem you are facing, in order to avoid any installation problem, please also make sure that the USB printer is disconnected, enter the control panel > devices and printers, remove any printer PSC 1310 listed and restart the PC before the installation.

  And regarding the specific error:

  Start the installation and follow the steps.

  Once reached the license agreement window, click the 2nd link above (using the Internet).

  Make sure that the two options set as No, thank you.

  Accept the license agreementt continue following the install.

  You see a difference by changing these settings?

  Kind regards

  Shlomi

• Cannot install the all-in-one printer

  Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

  System Windows 8.1

  I uninstalled printer because had message printer disconneted.

  Check the devices & printers in the control panel

  Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

  I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

  According to HP print and scan the doctor 4.3

  The following products are visible from your computer

  HPDD4BE7 (HP office jet 4500 G510g-m)

  connection: network

  software requirement: installed

  I tried to print but prints blank pages

  I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

  I have good HP office jet 4500 G510g-m printer installed?

   

  Troubleshooting report

  Problem with the yellow triangle detected printer with an exclamation mark inside

  There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

   

  Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

  First step: rename the .dat files in the Windows folder

  Search box, type % windir %

  No adjustment results found for your search %windir%\System32

  The first step is not a solution

  Second step: download and install the software from the HP site

  Not a solution: when click on get installation message: the system cannot find the specified file.

  You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

  question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

  I have no problem, download and install any software but

  HPDD4BE7 (HP Officejet 4500 G510g-m)

  I did the test HP officejet 4500

  Green connection box

  device status green checkmark

  I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

   

   

  Ok

  Please try the following steps:

  1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
  2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
  3. Type %windir% , and then click OK.
  4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
  7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
  8. Launch the dialog box run by following steps 2, type % temp % and click OK.
  9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

  Please follow these steps in the exact order, is there a difference during the installation of the software?

• Cannot install the printer. The print processor is not (winprint)

  According to the scenario:

  DC1 in site 1 runs Windows Server 2012 Standard, printing and Document services are installed. Many printers are installed and work.

  DC2 in site 2 is running Windows Server 2008 R2 Standard 64-bit, printing and Document services are installed. I want to install printers that users in this site must be able to print with.

  Same printer exist in both sites. In Site 1 on DC1, I was able to properly install the driver, add the port and installed the printer.

  I took the same driver DC2 and installed. I created the Port with the IP address of the printer but when I finish the Add Printer Wizard I get an error message saying: cannot install the printer. There is no winprint print processor.

  I was looking in many forums and before you ask, the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors\winprint key does not exist on two domain controllers (tried to create thispost), but makes no difference.

  The winprint.dll file does not exist in the C:\Windows\System32\spool\prtprocs\w32x86 directory on any of the machines, but is located under C:\Windows\System32\spool\prtprocs\x64 on the two machines.

  There seems to be no difference in configuration between these two machines, but as I mentioned abov, on DC1, I'm able to add the printer, and I'm not on DC2.

  Is there anything I can do to get the job to the printer on DC2?

  (And for those who ask why install on a domain controller, there is no member server in this site).

  Thank you

  Hello Josi,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Thank you

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• I have windows 7 ultimate. Cannot install the printer hp psc software 2410. How to rectify

  My laptop says cannot install the software. I tried all help. Unable to resolve.

  Hello

  According to the HP.com website, your printer driver is installed via Windows Update. The HP document that describes this process can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4063&product=303753&sw_lang=.

  Basically, you need to leave the laptop to start the Add New Hardware Wizard. You can facilitate this by going to control panel, select devices and printers, and when this window opens, select Add a device. Make sure that your printer is connected to your computer via a USB cable, the printer, before to start the wizard.

  Let me know if this helps you.

  Kind regards

  BearPup

• Cannot install the update error

  I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

  I would try to update via iTunes

  Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

  The time that the phone is detected, choose software update

  If the phone is not detected - see here

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  OR

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Satellite P750 - 02Q 001 - cannot install the Bluetooth and Tuner DVB-T_ATSC Yuan

  I have more than 20 years and the first time ever answer concerning support for the installation of a driver... sheeezz

  Recently bought laptop below and formatting of disk with WIndows 7 ultimate + SP1 (64-bit)

  Australia
  TOSHIBA SATELLITE P750 - PSAY3A - 02Q 001

  Cannot install the latest drivers below (everything worked when bought the laptop):

  -Yuan DVB-T_ATSC Tuner driver (for TV Tuner model only) driver 2.3.3.31 Windows 7 64 - bit 2.9 MB
  -Bluetooth Stack for Windows by Toshiba Bluetooth 8.00.06 (T) Windows 7 64-bit 78,08 MB

  * DVB - T Tuner Driver *.
  The EXE file extracted in the temp folder and goes no further.
  The device driver shows "STK7700D" with an exclamation mark against it. See the image below.

  * Bluetooth Driver *.
  First installation install the original driver, then he received close to 50% through the installation (appears to fail to install the components of RF RFBUS).

  Then install attempt fails to go too far (is unable to install the driver at all).

  Third attempt and subsequent attempts to repeat the foregoing in order. Install it just gets to a point and is unable to go any further.

  I tried to disable all Wireless WAN and various other comments and try the install again. Repeats exactly as above!

  Refer to pictures:

  DEVICE MANAGER
  http://I52.Tinypic.com/35cr38i.jpg

  1ST COURSE SETUP
  http://I52.Tinypic.com/2r6jfv9.jpg

  2ND INSTALL PROGRESS
  http://i55.Tinypic.com/jgphfc.jpg

  see you soon

  Dennis

  > The EXE file extracted in the temp folder and goes no further.
  > The device driver shows "STK7700D" with an exclamation mark against it. See the image below

  Try to extract the exe from another place, not in the temp folder.
  In my case, I created a folder on a second partition (D) and have extracted the exe file in this folder. Can go to the Device Manager, and then can install the driver through the Device Manager.
  Choose the installation procedure advantage and point to the folder that contains the extracted files.

  With regard to the issue of the BT;
  Download the new battery of BT from here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Then clean the registry using the CCleaner.
  This tool is freeware and can be downloaded on several different pages.
  So after cleaning check if you could install new BT of the register stack.

• Satellite C50D-A-133 with Win7 - cannot install the USB 3.0 driver

  I Satellite, C50D-A-133 with Win 7 x 64 and cannot install the usb 3.0 drivers.
  I download the driver from the support site of toshiba for usb 3.0 for win7 x 64 and it starts to install the driver, but in the end it saids...
  Windows found driver software for your device but encountered an erroe trying to install it.
  AMD USB 3.0 host controller
  The system cannot find the specified file.

  I try to point the location of the driver but same error.
  Other drivers installed ok only gives error

  I ve downloaded and unzipped the driver and everything seems OK.
  As far as I know laptops equipped with platform AMD isn't chipset driver and after installing display driver must be installed USB driver.

  Try to download it again and start the installation manually.

• drivers LabVIEW for agilent e4432b, cannot find the way to control multitone?

  drivers LabVIEW for agilent e4432b, cannot find the way to control multitone? How to deal

  Hello Brownheart,

  Drivers for the instruments aren't supposed to cover all applications use of instruments, only for the most common uses. No matter if multitone is a common use for this instrument, a brief review of the functions available in the driver does not have this feature.

  What you have to do is to create your own config VI using the information of the use of the programming unit. Is not ideal, but at least the driver NOR provided gives you a starting point for adding this feature.

• HP 15r-250tu: cannot install the drivers for the new laptop

  Hi expert, I bought a new laptop from hp 15r-250tu. I installed windows 7 ultimate (64-bit) service Pack 1. Cannot install the drivers for my laptop.i IAM downloaded all the drivers available on the site of hp for this model laptop.i tried to install them in the order as the mentioned error messages, but get that my phone does not support these drivers. Please answer me with links of driver and sequence to install. Thank you.

  Hello:

  Use the W7 x 64 drivers for the HP 250 G2 on your model except file BIOS, firmware, wireless and bluetooth.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5449369&swLangOid=8&swEnvOid=4059

  Wireless:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_149229_1&swEnvOid=4058

  Bluetooth:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149791_1

• Cannot install the disc existing Outlook 2003 to new Dell with windows 7.

  Cannot install the disc existing Outlook 2003 to new Dell with windows 7.
  Cannot copy old file .exe that runs on windows xp.  does not open.

  Site MS says compatible with OUtlook 2003 IS-

  That is what it is?

  Windows Update has nothing to with the upgrade of Windows. Please repost your question in the support forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• Cannot install the update error Code Ox800B010B

  Original title: cannot install the update

  Cannot install the update KB2686827

  Error Code Ox800B010B

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. when exactly you get the error message?

  4. the problem occurs for all the updates?

  Method 1:

  I suggest that return you the item and run Microsoft fix:

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Test the problem in clean boot mode.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353