RADIUS CoA Port query of rebound

Hello

I have a question about Port CoA RADIUS Bounce.

I intend to deploy 802. 1 x with ISE 1.3 to:

802. 1 x authentication business desktop PC (with client anyconnect installed for user authentication and computer) - on successful authentication machine, ISE assign dynamically a VLAN
Phones IP Cisco profile

So that an authenticated corporate office pick up assigned dynamically on its VIRTUAL LAN IP address I was thinking of using CoA Port Bounce. If this office was connected via a Cisco IP phone profile successfully, am I right to say that the rebound of Port resulting will also affect the phone (phone to unregister from callmanager)?

Thank you
Andy

Hi Andy, if you then use PoE port-bounce the phone certainly would network and handler calls. The phone would essentially be down then put under tension and back to the top.

Now, that being said, you should keep in mind that a port-bounce would eliminate the existing session to dot1x and will be a new session will be initialized. So, to the point of termination would be left from the original VLAN again and obtaining the new VIRTUAL local network after authorization :) So I guess what I'm trying to say is that port-bounce is not the solution for this. Instead, you should consider:

1. with the help of the DACL instead of VLAN dynamic. This way you can have everyone in the same VLAN but different DACL allows to define the network access

2. continue to use the VLAN dynamic but keep in mind that some "dumb" devices does not detect the change VLAN, so do not enter a new IP address. The good news is that most modern devices can detect the change VLAN and should enter a new IP address. For example, you should not have problems with Windows 7 and new devices

My recommendation is to go with the option #1, same as always, which worked for me.

I hope this helps!

Thank you for evaluating useful messages!

Tags: Cisco Security

Similar Questions

Compaq DC7900 small form facto: PCI port query

Hello

I just got my hands on a computer desktop HP 7900 with Vista 32 bit. The PCI shows a triangle with yellow exclamation point and I have no idea if it is broken or needs of drivers, etc. If she needs a driver, can someone tell me where I would be able to download it, please? In addition, how would I know if the port is broken? Please take it easy because I'm not too confident with land navigation computer.

Thanks in advance.

Hello:

You need the driver for this device...

This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

File name: sp41283.exe

Attribute RADIUS 198

Hello

I try to get the attribute radius 198 of the access router with ios 12.3 (AS5300, C2610) remotely.

With 'debug RADIUS' following output apears:

* 01:06:02.679 Mar 1: RADIUS: Acct-Session-Id [44] 10 "00000009.

* 01:06:02.679 Mar 1: RADIUS: Framed-Protocol [7] PPP 6

[1]

* 01:06:02.679 Mar 1: RADIUS: Framed-IP-Address [8] 6 192.168.1.1

* 01:06:02.679 Mar 1: RADIUS: seller, Cisco [26] 35

* Mar 1 01:06:02.679: RAY: Cisco-AVpair [1] 29 'connect-progress = L '.

"A Up of his."

* 01:06:02.679 Mar 1: RADIUS: Acct-Session-time [46] 23 6

* 01:06:02.683 Mar 1: RADIUS: Acct-Input-bytes [42] 6 1377

* 01:06:02.683 Mar 1: RADIUS: Acct-Output-byte 6 106 [43]

* 01:06:02.683 Mar 1: RADIUS: Acct-Input-Packets [47] 6 14

* 01:06:02.683 Mar 1: RADIUS: Acct-Output-Packets [48] 6 7

* 01:06:02.683 Mar 1: RADIUS: Acct-Terminate-Cause [49] 6-user request

[1]

* 01:06:02.683 Mar 1: RADIUS: seller, Cisco [26] 39

* Mar 1 01:06:02.683: RAY: Cisco-AVpair [1] 33 "disc-cause-ext = PPP.

Receive the term. "

* 01:06:02.683 Mar 1: RADIUS: authentic [45] RADIUS 6

[1]

* 01:06:02.687 Mar 1: RADIUS: username [1] 6 'test '.

* 01:06:02.687 Mar 1: RADIUS: Acct-status-Type [40] stop 6

[2]

* 01:06:02.687 Mar 1: RADIUS: seller, Cisco [26] 16

* Mar 1 01:06:02.687: RAY: cisco-nas-port [2] 10 "BRI0/0:1.

* 01:06:02.687 Mar 1: RADIUS: NAS-Port [5] 6 30001

* 01:06:02.687 Mar 1: RADIUS: seller, Cisco [26] 26

* 01:06:02.687 Mar 1: RADIUS: Cisco-AVpair [1] 20 "interface = BRI0/0:1.

"

* 01:06:02.687 Mar 1: RADIUS: NAS-Port-Type [61] 6 ISDN

[2]

* 01:06:02.691 Mar 1: RADIUS: Calling-Station-Id [31] 12 '3334277535 '.

* 01:06:02.691 Mar 1: RADIUS: Called-Station-Id [30] 8 '289981 '.

* 01:06:02.691 Mar 1: RADIUS: Type of Service [6] 6 box

[2]

* 01:06:02.691 Mar 1: RADIUS: NAS-IP-Address [4] 6 192.168.255.104

* 01:06:02.691 Mar 1: RADIUS: Acct-Delay-Time [41] 6 0

Where the 198 attribute?

Thank you

Oliver

Hello Oliver,.

According to the "exclusive provider of additional RADIUS attributes" to

http://www.Cisco.com/en/us/products/SW/iosswrel/ps1826/products_feature_guide09186a0080080efc.html

In addition, it should be

RADIUS-server host x.x.x.x non-standard

in the config to inform the router, that other attributes will be used as well.

See also http://www.cisco.com/en/US/products/sw/iosswrel/ps1828/products_configuration_guide_chapter09186a00800ca5f2.html#xtocid182645

for a syntax of command in IOS 12.0

I hope this helps!

Regards, Martin

Authentication RADIUS Cisco switch

Hello

I have a cisco 2960 switch and currently trying to install radius authentication. My guy from microsoft do the side server, we have the correspondence of the keys and he says there is no problem on his side, but we still Pascal operate.

Config of switch

AAA new-model
AAA authentication login default local radius group

Server RADIUS auth-port host 10.0.0.13 1812
0 of RADIUS-server key test

line vty 0 4
by default the authentication of connection

switch and the radius server are installed on the same network. I did a debug and confused on the output. Can someone point me in the right direction.

I did a radius authentication and aaa debug debugging

AccessSwitch #.

RADIUS/ENCODE (00001586): orig. component type = Exec

RADIUS: AAA Attr not supported: interface [221] 4 92269176

RADIUS / encode (00001586): down the type of service, "radius attribute 6 sur-pour-login-auth server" is disabled

RADIUS (00001586): Config NAS IP: 0.0.0.0

RADIUS (00001586): Config NAS IPv6:

RADIUS / encode (00001586): acct_session_id: 20

RADIUS (00001586): send

RADIUS/ENCODE: Best local IP 10.0.0.56 for Radius server - address 10.0.0.13

RADIUS (00001586): Sending a bunch of RADIUS IPv4

RADIUS (00001586): Send access request ID 10.0.0.13:1812 1645/18, len 77

RADIUS: authenticator 7 c B1 A0 55 62 45 7 AF b - E2 F2 48 4 C3 F0 72 98

RADIUS: Username [1] 15 "james.hoggard".

RADIUS: User-Password [2] 18 *.

RADIUS: NAS-Port [5] 6 2

RADIUS: NAS-Port-Id [87] 6 'tty2 '.

RADIUS: NAS-Port-Type [61] 6 virtual [5]

RADIUS: NAS-IP-Address [4] 6 10.0.0.56

RADIUS (00001586): Started 5 sec timeout

RADIUS: Receipt id 1645/18 10.0.0.13:1812, Access-Reject, len 20

RADIUS: authenticator 80 CE C9 C2 D6 30 65 A9 - 07 9th 12 4 80 A9 3 c D8

RADIUS (00001586): Receipt of id 1645/18

AAA/AUTHENTIC/LOGIN (00001586): choose method list "by default".

RADIUS / encode (00001586): ask "" password: ".

RADIUS / encode (00001586): upload the package. GET_PASSWORD

Thank you

James.

Yes, PAP always use text gross, and that doesn't provide any kind of security. However, does not support administrative session with Ray chap/mschap.we cannot configure firewall/IOS devices for the Administration as a telnet/ssh session to authenticate users on the mschapv2 authentication method.

If you need secure communications you can implement GANYMEDE.

GANYMEDE + and RADIUS using a shared secret key for encryption for communications between the client and the server. RADIUS encrypts the password of the user when the client makes a request to the server. This encryption prevents a person from sniffing the password of the user using a packet Analyzer. However, other information such as username and the services being performed can be analyzed. GANYMEDE + does not encrypt only the entire load at the communication, but it also encrypts the password between the client and the server. This makes it harder to decipher the information on the communication between the client and the server. GANYMEDE + uses the MD5 hash in its algorithm of encryption function and decryption.

~ BR
Jatin kone

* Does the rate of useful messages *.

Failure of Auth RADIUS for PPTP on IOS

Hello

We use a Cisco 1721 router to complete Microsoft's PPTP connections. When the local use of the user-data base on the router, everything works.

However with the RADIUS authentication, Setup fails.

Even if the router IOS"" get a "Access-accept" the RADIUS, but still he abandoned the client connection.

This is the track

+++++++++++++++++++++++++++++++++++++++

RADIUS: Send to unknown id 10 10.10.1.20:1812, Access-Request, len 138

1w2d: RADIUS: authenticator 82 C6 16 85 6th 2F C0 - 00 00 00 00 00 00 00 00 D8

1w2d: RADIUS: username [1] 20 'xxxxxx '.

1w2d: RADIUS: vendor, Microsoft [26] 16

1w2d: RADIUS: MSCHAP_Challenge [11] 10

1w2d: RADIUS: 82 16 85 6th 2F C6 [? / n]

1w2d: RADIUS: vendor, Microsoft [26] 58

1w2d: RADIUS: MS-CHAP-response [1] 52 *.

1w2d: RADIUS: NAS-Port [5] 6 1

1w2d: RADIUS: NAS-Port-Type [61] 6 virtual [5]

1w2d: RADIUS: Type of Service [6] 6 box [2]

1w2d: RADIUS: NAS-IP-Address [4] 6 10.10.1.37

1w2d: RADIUS: receipt id 10 10.10.1.20:1812, Access-Accept, len 119

1w2d: RADIUS: authenticator ED 11 24 75 81 89 B4 E6 - 68 63 CC 25 BA E0 0E 13

1w2d: RADIUS: Framed-Protocol [7] 6 PPP [1]

1w2d: RADIUS: Type of Service [6] 6 box [2]

1w2d: RADIUS: [25] in class 32

1w2d: RADIUS: 3 b 00 05 0E 00 00 01 37 00 01 0 a 0 a 01 14 and 01 C3 [;? 7?]

1w2d: RADIUS: F3 0C EA 95 B9 06 00 00 00 00 00 00 [?]

1w2d: RADIUS: vendor, Microsoft [26] 40

1w2d: RADIUS: MS-CHAP-MPPE-Keys [12] 34 *.

1w2d: RADIUS: vendor, Microsoft [26] 15

1w2d: RADIUS: MS-CHAP-DOMAIN [10] 9 "ARKLOW".

1w2d: RADIUS: response (10) could not decipher

++++++++++++++++++++++++++++++++

Parts are important config like below

===========================================

radius of group AAA of ppp use-RADIUS authentication

VPDN enable

!

VPDN-Group 1

! PPTP by default VPDN group

Description of Tunnels PPTP termination

accept-dialin

Pptp Protocol

virtual-model 1

renegotiation of LCP always

adjusting IP mtu

interface virtual-Template1

IP unnumbered FastEthernet0

no ip redirection

No keepalive

peer default ip address pool dialin_pool

PPP mppe 128 encryption

use-radius of PPP authentication chap, ms-chap pap

!

IP local pool dialin_pool 10.10.3.51 10.10.3.100

==========================================

OK, you get it now in your debugging:

RADIUS: Response (20) could not decipher

It is an indication that do not match your ray keys. I suggest remove and re-add the key on both devices. When you add it back on the router make sure that you just cut and paste it, cause this can add extra spaces at the end which become part of the key. Enter it manually on both devices and see what you get.

RADIUS does not pray attribute filling 4 (NAS-IP-Address)

I'm trying to get a Cisco 3120 G configured for RADIUS authentication. I have a lot of other IOS devices with identical configuration of work lines, however, it gives me a hard time. The strategy of the RADIUS server is configured by NAS-IP-Address. The configuration of the AAA and RADIUS is as follows:

AAA new-model
AAA authentication login default local radius group
AAA authorization exec default local radius group

host 10.x.x.x auth-port 1645 1646 RADIUS server acct-port
Server RADIUS ports source-1645-1646
Server RADIUS button 7 XXXXXXXXXXXXXX

See the Flash following debugging information:

indrc3120a #.
000284: 8 Feb 14:05:15.447 PST: RADIUS: Pick NAS IP for you = 0x5992EF4 = 0 cfg_addr = 0.0.0.0 tableid
000285: 8 Feb 14:05:15.447 PST: RADIUS: ustruct sharecount = 1
000286: Feb 8 14:05:15.447 PST: RADIUS: success radius_port_info() = 1 radius_nas_port = 1
000287: Feb 8 14:05:15.447 PST: RADIUS (00000000): send 10.x.x.x:1645 id 1645/8, len 84 access request
000288: Feb 8 14:05:15.447 PST: RADIUS: authenticator 12 5th 7th DF 01 B5 F1 D8 - 40 07 09 76 88 C1 A4 C5
000289: 8 Feb 14:05:15.447 PST: RADIUS: NAS-IP-Address [4] 6 0.0.0.0
000290: 8 Feb 14:05:15.447 PST: RADIUS: NAS-Port [5] 6 2
000291: Feb 8 14:05:15.447 PST: RADIUS: NAS-Port-Type [61] 6 virtual [5]
000292: 8 Feb 14:05:15.447 PST: RADIUS: username [1] 13 "admin_user '.
000293: 8 Feb 14:05:15.447 PST: RADIUS: Calling-Station-Id [31] 15 "10.y.y.y".
000294: 8 Feb 14:05:15.447 PST: RADIUS: User-Password [2] 18 *.
000295: 8 Feb 14:05:15.505 PST: RADIUS: receipt id 1645/8 10.x.x.x:1645, Access-Reject, len 20
000296: 8 Feb 14:05:15.505 PST: RADIUS: authenticator 4th EC 8F AB BB 8th F9 BB - 13 67 56 A3 5F F9 99 94
000297: Feb 8 14:05:15.505 PST: RADIUS: saved the data of permission for the user 5992EF4 to 0

Note the NAS-IP-Address populated as 0.0.0.0 attribute

Another switch with an identical Setup returns the following:

tritc3120a #.
350554: 8 Feb 14:11:00.916 PST: RADIUS / ENCODE (000155BC): ask "" user name: ".
350555: 8 Feb 14:11:10.605 PST: RADIUS / ENCODE (000155BC): ask "" password: ".
350556: 8 Feb 14:11:14.480 PST: RADIUS/ENCODE (000155BC): orig. component type = EXEC
350557: 8 Feb 14:11:14.480 PST: RADIUS: AAA Attr not supported: interface [170] 4
350558: 8 Feb 14:11:14.480 PST: RADIUS: 74 74 [tt]
350559: 8 Feb 14:11:14.480 PST: RADIUS / ENCODE (000155BC): down the type of service, "radius attribute 6 sur-pour-login-auth server" is disabled
350560: 8 Feb 14:11:14.480 PST: RADIUS (000155BC): Config NAS IP: 0.0.0.0
350561: 8 Feb 14:11:14.480 PST: RADIUS / ENCODE (000155BC): acct_session_id: 87482
350562: 8 Feb 14:11:14.480 PST: RADIUS (000155BC): send
350563: 8 Feb 14:11:14.480 PST: RADIUS/ENCODE: Best 10.x.x.x address IP Local to the 10.y.y.y Radius Server
350564: 8 Feb 14:11:14.480 PST: RADIUS (000155BC): send 10.y.y.y:1645 id 1645/222, len 90 access request
350565: 8 Feb 14:11:14.480 PST: RADIUS: authenticator 5F B1 17 DF 72 4B 3D - B6 D8 5 85 66 B9 8 d 7 c A6
350566: 8 Feb 14:11:14.480 PST: RADIUS: username [1] 13 "admin_user '.
350567: 8 Feb 14:11:14.480 PST: RADIUS: User-Password [2] 18 *.
350568: 8 Feb 14:11:14.480 PST: RADIUS: NAS-Port [5] 6 2
350569: 8 Feb 14:11:14.480 PST: RADIUS: NAS-Port-Id [87] 6 'tty2 '.
350570: 8 Feb 14:11:14.480 PST: RADIUS: NAS-Port-Type [61] 6 virtual [5]
350571: 8 Feb 14:11:14.480 PST: RADIUS: Calling-Station-Id [31] 15 "10.z.z.z".
350572: 8 Feb 14:11:14.480 PST: RADIUS: NAS-IP-Address [4] 6 1.2.3.4
350573: 8 Feb 14:11:14.556 PST: RADIUS: receipt id 1645/222 10.y.y.y:1645, Access-Accept, len 83
350574: 8 Feb 14:11:14.556 PST: RADIUS: authenticator 24 D9 F9 E2 BB A3 66 F6 - 73 E8 5 42 8 A5 17 DA
350575: 8 Feb 14:11:14.556 PST: RADIUS: Type of Service [6] 6 Administrative [6]
350576: 8 Feb 14:11:14.556 PST: RADIUS: [25] in class 32
350577: 8 Feb 14:11:14.556 PST: RADIUS: 59 B1 6 06 00 00 01 37 00 01 0a 1st DC 18 01 CB C7 B8 D7 82 CA E2 00 00 00 00 00 00 00 0b [Ym7]
350578: 8 Feb 14:11:14.556 PST: RADIUS: seller, Cisco [26] 25
350579: 8 Feb 14:11:14.556 PST: RADIUS: Cisco-AVpair [1] 19 "shell: priv-lvl = 15.
350580: 8 Feb 14:11:14.556 PST: RADIUS (000155BC): receipt of id 1645/222

Note that in the above example, the NAS-IP-Address is feeding properly (I just the changed for security reasons)

If anyone has any advice, it would be greatly appreciated. Does the switch need a restart? Blow RADIUS server process?

Thank you

CSCdx27019">."

Seems to be a bug,

CSCdx27019 Pkt sent by CSS access RADIUS request contains no information NAS

The feature of Cisco ACS NAR (restricted access network) with RADIUS does not work with CSS. This is because the radius NAS-IP-Address attribute is set to 0.0.0.0 in the Radius authentication request.

Rgds, jousset

Note the useful messages

IOS Easy VPN Server / Radius attributes

Hello

I made an easy VPN server installation with a running 12.2 2621XM router (15) output T5. VPN Clients/users are authenticated against Cisco ACS 3.2 by RADIUS.

It works fine, but there is a problem that I can't solve. Each user must have the same VPN assigned IP address whenever it is authenticated.

The ACS sends the right radius attribute (box-IP-Address) back to square of IOS, but this address is not assigned to the client. The customer always gets the next available IP address in the local set on the router.

How can I solve this problem?

You will find the relevant parts of the configuration and a RADIUS "deb" below.

Kind regards

Christian

AAA - password password:

AAA authentication calls username username:

RADIUS AAA authentication login local users group

RADIUS AAA authorization network default local group

crypto ISAKMP policy 1

Group 2

!

crypto ISAKMP policy 3

md5 hash

preshared authentication

Group 2

ISAKMP crypto identity hostname

!

ISAKMP crypto client configuration group kh_vpn

mypreshared key

pool mypool

!

Crypto ipsec transform-set esp-3des esp-sha-hmac shades

!

mode crypto dynamic-map 1

shades of transform-set Set

!

users list card crypto mode client authentication

card crypto isakmp authorization list by default mode

card crypto client mode configuration address respond

dynamic mode 1-isakmp ipsec crypto map mode

!

interface FastEthernet0/1

IP 192.168.100.41 255.255.255.248

crypto map mode

!

IP local pool mypool 172.16.0.2 172.16.0.10!

Server RADIUS attribute 8 include-in-access-req

RADIUS-server host 192.168.100.13 key auth-port 1645 acct-port 1646 XXXXXXXXXXXXXXXX

RADIUS server authorization allowed missing Type of service

deb RADIUS #.

00:03:28: RADIUS: Pick NAS IP for you = tableid 0x83547CDC = 0 cfg_addr = 0.0.0.0 best_a

DDR = 192.168.100.26

00:03:28: RADIUS: ustruct sharecount = 2

00:03:28: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

00:03:28: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

4, len 73

00:03:28: RADIUS: authenticator 89 EA 97 56 12 B1 C5 C2 - C0 66 59 47 F7 88 96

68

00:03:28: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

00:03:28: RADIUS: NAS-Port-Type [61] Async 6 [0]

00:03:28: RADIUS: username [1] 10 "vpnuser1".

00:03:28: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

00:03:28: RADIUS: User-Password [2] 18 *.

00:03:28: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/4 l

in 108

00:03:28: RADIUS: authenticator C1 7 29 56 50 89 35 B7 - 92 7 b 1 has 32 87 15 6

A4

00:03:28: RADIUS: Type of Service [6] 6 leavers [5]

00:03:28: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

00:03:28: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

00:03:28: RADIUS: Tunnel-Password [69] 21 *.

00:03:28: RAY: box-IP-Netmask [9] 6 255.255.255.0

00:03:28: RADIUS: Framed-IP-Address [8] 6 172.16.0.5

00:03:28: RADIUS: [25] the class 37

00:03:28: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

000010]

00:03:28: RADIUS: 2F 33 63 30 61 38 36 34 31 61 76 70 75 73 [3/c0a8641a 6F 2F

/vpnus]

00:03:28: RADIUS: 65 72 31 [1]

00:03:28: RADIUS: saved the authorization for user 83547CDC to 83548430 data

00:03:29: RADIUS: authentication for data of the author

00:03:29: RADIUS: Pick NAS IP for you = tableid 0x82A279FC = 0 cfg_addr = 0.0.0.0 best_a

DDR = 192.168.100.26

00:03:29: RADIUS: ustruct sharecount = 3

00:03:29: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

00:03:29: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

5, len 77

00:03:29: RADIUS: authenticator 13 B2 A6 CE BF B5 DA 7th - 7B F0 F6 0b A2 35 60

E3

00:03:29: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

00:03:29: RADIUS: NAS-Port-Type [61] Async 6 [0]

00:03:29: RADIUS: username [1] 8 'kh_vpn '.

00:03:29: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

00:03:29: RADIUS: User-Password [2] 18 *.

00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

00:03:29: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/5 l

in 94

00:03:29: RADIUS: authenticator C4 F5 2F C3 EE 56 DA C9 - 05 D6 F5 5 d EF 74 23

AF

00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

00:03:29: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

00:03:29: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

00:03:29: RADIUS: Tunnel-Password [69] 21 *.

00:03:29: RADIUS: [25] class 35

00:03:29: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

000010]

00:03:29: RADIUS: 2F 34 63 30 61 38 36 34 31 61 2F 6 b 5F 68 76 70 [4/c0a8641a

[/ kh_vp]

00:03:29: RADIUS: 6 [n]

00:03:29: RADIUS: saved the authorization for user 82A279FC to 82A27D3C data

Assignment of an IP address via a server Raidus is currently not supported, even if your Radius Server is through an IP address, the router will ignore it and just assign an IP address from the pool locla. In fact, the pool room is the only way to assign IP addresses currently.

On the only way to do what you want right now is to create different groups VPN, each reference to a local IP pool with an address in it. Then ask each user connect to the appropriate by their VPN client group.

Yes, messy, but just try to provide a solution for you.

Problem with RADIUS and VRF in Cisco 6500

Hello

I have the following config of the radius authentication:

AAA new-model

AAA authentication login default local radius group

AAA authorization exec default local radius group

AAA - the id of the joint session

IP source-interface Vlan31 vrf LEGACY RADIUS

Server RADIUS auth-port host 10.10.4.18 1645 1646 acct-port-key 7 XXXXXXXX

Server RADIUS auth-port host 10.10.5.15 1812 1813 acct-port-key 7 XXXXXXXX

RADIUS vsa server send accounting

RADIUS vsa server send authentication

The work of Don t of authentication

The sniffer radius server does not detect the Cisco 6500 packages, but the 6500 icmp packets do very well.

# Ping vrf LEGACY 10.10.4.18 SOUrce VLAN 31 C6500

Type to abort escape sequence.

Send 5, echoes ICMP 100 bytes to 10.10.4.18, wait time is 2 seconds:

Packet sent with a source address of 10.10.5.254

!!!!!

Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms

interface Vlan31

XXXX description

IP vrf forwarding LEGACY

IP 10.10.5.254 255.255.254.0

no ip redirection

no ip proxy-arp

no ip mroute-cache

end

It has fix my configuration?

Can you help me?

What IOS version you run on your 6500?

Try the following:

AAA new-model

!

RADIUS AAA server group RADLegacy

10.10.4.18 server host

10.10.5.15 server host

IP vrf forwarding LEGACY

!

Group AAA authentication login default local RADLegacy

default AAA authorization exec RADLegacy local group

!

Firewall/RADIUS/LDAP

Hello

Someone help me please with ip authentication proxy.

In the firewall, there are two ACL. One is for authentication and one for access. When you try to access a system behind the firewall, you must enter username and password for authentication if you are allowed in the acl of the authentication. The firewall has then interrogate RADIUS servers. The RADIUS server then query LDAP servers to verify the user name and password. My question is what information is returned to the RADIUS server if the user name and password are valid and invalid? What information is sent to the firewall?

Thank you.

Hello

Yes you are right.

Kind regards

Vivek

Any attempt to access of inaccessible property via a reference RADIUS static type ball.

Hai guys...
I don't know why my code can not run...
This is the problem that I have to face...
package
{
import flash.display.Sprite;
import flash.events.Event;
public class bubble extends Sprite
{
private var balls: Array;
private var numBalls:Number = 30;
private var bounce: Number = - 0.5;
private var spring: Number = 0.05;
private var gravity: Number = 0.1;
public void Bubbles()
{
init();
}
private function init (): void
{
bullets = new Array();
for (var i: uint = 0; i < numBalls; i ++)
{
var ball: Ball = new Ball (Math.random () * 30 + 20,
Math.Random () * 0xffffff);
ball.x = Math.Random () * stage.stageWidth;
ball.y = Math.Random () * stage.stageHeight;
ball. VX = Math.Random () * 6 - 3;
ball. Vy = Math.Random () * 6 - 3;
addChild (ball);
Balls.push (ball);
}
addEventListener (Event.ENTER_FRAME, onEnterFrame);
}
private void onEnterFrame(event:Event):void
{
for (var i: uint = 0; i < numBalls - 1; i ++)
{
var ball0:Ball = balls [i];
for (var j: uint = i + 1; j < numBalls; j ++)
{
var ball1:Ball = balls [j];
var dx:Number = ball1.x - ball0.x;
var dy:Number = ball1.y - ball0.y;
var dist:Number = Math.sqrt (dx * dx + dy * dy);
var minDist: Number = ball0.radius + ball1.radius;
if(dist < minDist)
{
var angle: Number = Math.atan2 (dy, dx);
var tx:Number = ball0.x + Math.cos (angle) *.
minDist;
var ty:Number = ball0.y +.
Math.Sin (angle) *.
minDist;
var ax: Number = (tx - ball1.x) *.
Spring;
var ay: Number = (ty - ball1.y) *.
Spring;
ball0. VX = ax;
ball0. Vy = ay;
ball1. VX += ax;
ball1. Vy += ay;
}
}
}
for (i = 0; i < numBalls; i ++)
{
var ball: Ball = ball [i];
Move (ball);
}
}
private void move(ball:Ball):void
{
ball. Vy += gravity;
ball.x += ball.vx;
ball.y += ball.vy;
If (ball.x + ball.radius > stage.stageWidth)
{
ball.x = stage.stageWidth - ball.radius;
ball. VX * = rebound;
}
ElseIf (ball.x - ball.radius < 0)
{
ball.x = ball.radius;
ball. VX * = rebound;
}
If (ball.y + ball.radius > stage.stageHeight)
{
ball.y = stage.stageHeight - ball.radius;
ball. Vy * = rebound;
}
Else if (ball.y - ball.radius < 0)
{
ball.y = ball.radius;
ball. Vy * = rebound;
}
}
}
}

The error said you that your ball class does not have a RADIUS property. Chances are you need create such a property in this class.

Authentication of the AAA on switch

We are configuring 802. 1 x wired client. ISE is our AAA server. When configuring, I came across 3 commands different series

(1) RADIUS-server host auth-port 1812 acct-port 1813

Server RADIUS auth-port 1812 1813 acct-port host

the RADIUS server key

(2) RADIUS server for aaa group< radius="" group="" name="">

Server auth-port 1812 acct-port 1813

Server auth-port 1812 acct-port 1813

(3) aaa server RADIUS Dynamics-author

customer Server-key

customer Server-key

Now, we have already created in step 2 aaa server group.

What is the importance of step 3. If I do not add a client by virtue of the dynamics-author, what effect this will have on the global configuration. Cost will not affect posture because of this

Thank you

Aditya

Hello Aditya-

Orders to step #3 configure the n (in your case, the switch) to accept the CoA (change permission) which is used for 802. 1 x network authentication. If you are only interested in the configuration of the switch for the administration of the system, then you don't need these commands however, if you are considering the deployment of 802. 1 x then you need them. For more information see this link:

http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/identity-based-networking-services/whitepaper_C11-731907.html

Thank you for evaluating useful messages!

ISE 1.1 - switch ignores 'Session-Timeout '.

Hi all

I'm playing with the service to ISE customers and have some difficulties in function of time.

After comments connects, the Radius attributes are sent to the switch (3750G) one of them is Session-Timeout, which should be similar to 1 h (DefaultOneHour)

According to ISE logs and debugs switch, ISE has done well and this attribute has been sent but it seems that the switch simply ignores.

May 24 07:03:11.658: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied udp 10.1.100.194(1029) -> 10.1.100.2(389), 1 packet

19:46:57: RADIUS: COA received from id 36 10.1.100.6:64700, CoA Request, len 183

19:46:57: RADIUS/DECODE: parse unknown cisco vsa "reauthenticate-type" - IGNORE

19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid

19:46:57: RADIUS(00000000): sending

19:46:57: RADIUS(00000000): Send CoA Ack Response to 10.1.100.6:64700 id 36, len 38

19:46:57: RADIUS: authenticator 0B 30 6E 9B DF 97 0D A0 - D9 8B A5 5A 11 39 3E 41

19:46:57: RADIUS: Message-Authenticato[80] 18

19:46:57: RADIUS: 11 42 82 E2 52 68 DF 28 CD 43 AE 88 0C 5D 91 10 [ BRh(C]]

19:46:57: RADIUS/ENCODE(00000026):Orig. component type = Dot1X

19:46:57: RADIUS(00000026): Config NAS IP: 0.0.0.0

19:46:57: RADIUS(00000026): Config NAS IPv6: ::

19:46:57: RADIUS/ENCODE(00000026): acct_session_id: 27

19:46:57: RADIUS(00000026): sending

19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6

19:46:57: RADIUS(00000026): Send Access-Request to 10.1.100.6:1812 id 1645/25, len 267

19:46:57: RADIUS: authenticator 6D 92 DC 77 87 47 DA 8E - 7D 6B DD DD 18 BE DC 33

19:46:57: RADIUS: User-Name [1] 14 "0016d329042f"

19:46:57: RADIUS: User-Password [2] 18 *

19:46:57: RADIUS: Service-Type [6] 6 Call Check [10]

19:46:57: RADIUS: Vendor, Cisco [26] 31

19:46:57: RADIUS: Cisco AVpair [1] 25 "service-type=Call Check"

19:46:57: RADIUS: Framed-IP-Address [8] 6 10.1.100.194

19:46:57: RADIUS: Framed-MTU [12] 6 1500

19:46:57: RADIUS: Called-Station-Id [30] 19 "00-24-F9-2D-83-87"

19:46:57: RADIUS: Calling-Station-Id [31] 19 "00-16-D3-29-04-2F"

19:46:57: RADIUS: Message-Authenticato[80] 18

19:46:57: RADIUS: AD EB 99 4A F2 B9 4E BB 2E B3 E2 04 BE 5B 0C 72 [ JN.[r]

19:46:57: RADIUS: EAP-Key-Name [102] 2 *

19:46:57: RADIUS: Vendor, Cisco [26] 49

19:46:57: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A01280100000016043E0D23"

19:46:57: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]

19:46:57: RADIUS: NAS-Port [5] 6 50107

19:46:57: RADIUS: NAS-Port-Id [87] 22 "GigabitEthernet1/0/7"

19:46:57: RADIUS: Called-Station-Id [30] 19 "00-24-F9-2D-83-87"

19:46:57: RADIUS: NAS-IP-Address [4] 6 10.1.100.1

19:46:57: RADIUS(00000026): Sending a IPv4 Radius Packet

19:46:57: RADIUS(00000026): Started 5 sec timeout

19:46:57: RADIUS: Received from id 1645/25 10.1.100.6:1812, Access-Accept, len 272

19:46:57: RADIUS: authenticator F1 5F 57 72 FD 80 95 20 - 46 47 B5 CE DF 63 6E 1A

19:46:57: RADIUS: User-Name [1] 19 "[email protected]/* */"

19:46:57: RADIUS: State [24] 40

19:46:57: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41 [ReauthSession:0A]

19:46:57: RADIUS: 30 31 32 38 30 31 30 30 30 30 30 30 31 36 30 34 [0128010000001604]

19:46:57: RADIUS: 33 45 30 44 32 33 [ 3E0D23]

19:46:57: RADIUS: Class [25] 49

19:46:57: RADIUS: 43 41 43 53 3A 30 41 30 31 32 38 30 31 30 30 30 [CACS:0A012801000]

19:46:57: RADIUS: 30 30 30 31 36 30 34 33 45 30 44 32 33 3A 69 73 [00016043E0D23:is]

19:46:57: RADIUS: 65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 37 [ e/124036791/297]

19:46:57: RADIUS: Session-Timeout [27] 6 2940

19:46:57: RADIUS: Termination-Action [29] 6 0

19:46:57: RADIUS: Message-Authenticato[80] 18

19:46:57: RADIUS: 26 46 2C B6 75 95 AF 37 E6 3B B1 CB F2 70 E0 8D [ &F,u7;p]

19:46:57: RADIUS: Vendor, Cisco [26] 72

19:46:57: RADIUS: Cisco AVpair [1] 66 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-Contractors-ACL-4fbcd736"

19:46:57: RADIUS: Vendor, Cisco [26] 42

19:46:57: RADIUS: Cisco AVpair [1] 36 "profile-name=Microsoft-Workstation"

19:46:57: RADIUS(00000026): Received from id 1645/25

19:46:57: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE

May 24 07:03:19.132: %MAB-5-SUCCESS: Authentication successful for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23

May 24 07:03:19.132: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23

May 24 07:03:19.140: %EPM-6-POLICY_REQ: IP 10.1.100.194| MAC 0016.d329.042f| AuditSessionID 0A01280100000016043E0D23| AUTHTYPE DOT1X| EVENT APPLY

May 24 07:03:19.165: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-ACL-4fbcd736| EVENT DOWNLOAD-REQUEST

19:46:57: RADIUS/ENCODE(00000000):Orig. component type = Invalid

19:46:57: RADIUS(00000000): Config NAS IP: 0.0.0.0

19:46:57: RADIUS(00000000): sending

19:46:57: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6

19:46:57: RADIUS(00000000): Send Access-Request to 10.1.100.6:1812 id 1645/26, len 144

19:46:57: RADIUS: authenticator 1A 52 18 C5 25 A7 5C DC - 29 C9 5C 7C C5 B3 FC 58

19:46:57: RADIUS: NAS-IP-Address [4] 6 10.1.100.1

19:46:57: RADIUS: User-Name [1] 38 "#ACSACL#-IP-Contractors-ACL-4fbcd736"

19:46:57: RADIUS: Vendor, Cisco [26] 32

19:46:57: RADIUS: Cisco AVpair [1] 26 "aaa:service=ip_admission"

19:46:57: RADIUS: Vendor, Cisco [26] 30

19:46:57: RADIUS: Cisco AVpair [1] 24 "aaa:event=acl-download"

19:46:57: RADIUS: Message-Authenticato[80] 18

19:46:57: RADIUS: 2B 6B 13 37 0D 25 11 E9 6A 56 35 D8 91 9F EF F0 [ +k7?jV5]

19:46:57: RADIUS(00000000): Sending a IPv4 Radius Packet

19:46:57: RADIUS(00000000): Started 5 sec timeout

May 24 07:03:19.191: %SEC-6-IPACCESSLOGP: list ACL-DEFAULT denied tcp 10.1.100.194(2125) -> 10.1.100.6(8443), 1 packet

19:46:57: RADIUS: Received from id 1645/26 10.1.100.6:1812, Access-Accept, len 359

19:46:57: RADIUS: authenticator 31 B0 73 93 CA 0E 5C 7C - 11 29 AA 57 6C A1 53 D8

19:46:57: RADIUS: User-Name [1] 38 "#ACSACL#-IP-Contractors-ACL-4fbcd736"

19:46:57: RADIUS: State [24] 40

19:46:57: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61 [ReauthSession:0a]

19:46:57: RADIUS: 30 31 36 34 30 36 30 30 30 30 30 30 35 44 34 46 [0164060000005D4F]

19:46:57: RADIUS: 42 44 44 44 33 37 [ BDDD37]

19:46:57: RADIUS: Class [25] 49

19:46:57: RADIUS: 43 41 43 53 3A 30 61 30 31 36 34 30 36 30 30 30 [CACS:0a016406000]

19:46:57: RADIUS: 30 30 30 35 44 34 46 42 44 44 44 33 37 3A 69 73 [0005D4FBDDD37:is]

19:46:57: RADIUS: 65 2F 31 32 34 30 33 36 37 39 31 2F 32 39 38 [ e/124036791/298]

19:46:57: RADIUS: Termination-Action [29] 6 1

19:46:57: RADIUS: Message-Authenticato[80] 18

19:46:57: RADIUS: 80 EF 5B 80 76 F1 C9 37 0B 25 34 37 10 57 CC 44 [ [v7?47WD]

19:46:57: RADIUS: Vendor, Cisco [26] 47

19:46:57: RADIUS: Cisco AVpair [1] 41 "ip:inacl#1=permit udp any any eq domain"

19:46:57: RADIUS: Vendor, Cisco

SW3750-1# [26] 48

19:46:57: RADIUS: Cisco AVpair [1] 42 "ip:inacl#2=permit ip any host 10.1.100.6"

19:46:57: RADIUS: Vendor, Cisco [26] 57

19:46:57: RADIUS: Cisco AVpair [1] 51 "ip:inacl#3=deny ip any 10.0.0.0 0.255.255.255 log"

19:46:57: RADIUS: Vendor, Cisco [26] 36

19:46:57: RADIUS: Cisco AVpair [1] 30 "ip:inacl#4=permit ip any any"

19:46:57: RADIUS(00000000): Received from id 1645/26

May 24 07:03:19.216: %EPM-6-AAA: POLICY xACSACLx-IP-Contractors-AC

SW3750-1#

SW3750-1#L-4fbcd736| EVENT DOWNLOAD-SUCCESS

May 24 07:03:20.147: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0016.d329.042f) on Interface Gi1/0/7 AuditSessionID 0A01280100000016043E0D23

19:46:58: RADIUS/ENCODE(00000026):Orig. component type = Dot1X

19:46:58: RADIUS(00000026

SW3750-1#

SW3750-1#): Config NAS IP: 0.0.0.0

19:46:58: RADIUS(00000026): Config NAS IPv6: ::

19:46:58: RADIUS/ENCODE: Best Local IP-Address 10.1.100.1 for Radius-Server 10.1.100.6

19:46:58: RADIUS(00000026): Sending a IPv4 Radius Packet

19:46:58: RADIUS(00000026): Started 5 sec timeout

19:46:58: RADIUS: Received from id 1646/35 10.1.100.6:1813, Accounting-response, len 38

SW3750-1#
SW3750-1#sh authe sess int g 1/0/7

Interface: GigabitEthernet1/0/7

MAC Address: 0016.d329.042f

IP Address: 10.1.100.194

User-Name: [email protected]/* */

Status: Authz Success

Domain: DATA

Security Policy: Should Secure

Security Status: Unsecure

Oper host mode: multi-auth

Oper control dir: both

Authorized By: Authentication Server

Vlan Group: N/A

ACS ACL: xACSACLx-IP-Contractors-ACL-4fbcd736

Session timeout: N/A

Idle timeout: N/A

Common Session ID: 0A01280100000016043E0D23

Acct Session ID: 0x0000001B

Handle: 0x2F000017

Runnable methods list:

Method State

mab Authc Success

dot1x Not run

SW3750-1#

Has anyone else encountered similar?

I tried 12.2 (58) and now I'm stable

Cisco IOS software, software C3750 (C3750-IPSERVICESK9-M), Version 15.0 (1) SE2, VERSION of the SOFTWARE (fc3)

but in both cases, it is similar.

concerning

Przemek

Hello

Have you tried 12.2.55SE3 IOS which is recommended (tested) according to TrustSec 2.0 Design and getting started Guide implemented?

What is your port configuration? Have you included orders "reauth?

int gX/Y

...

periodic authentication

Server to authenticate again authentication timer

See you soon,.

Seba

ISE server receives requests for authentication of the bridge VLAN, not the IP Address of the switch management

Hello

A 3850 catalyst switch has VLAN 20 (10.18.4.32/29) defined on it, which has a 10.18.4.38 gateway:

D01-01-BWY #show ip short int vlan 20
Interface IP-Address OK? Method State Protocol
Vlan20 10.18.4.38 YES manual up up

A server of ISE (SNS3415) is connected to a port configured on VLAN 20, with IP address of 10.18.4.33.

01-BWY-D01 has to a management interface of 10.18.4.17.

I created this switch as a device network in ISE and activated the RADIUS config and then configured the switch with the following commands:

RADIUS attribute 6 sur-pour-login-auth server
RADIUS attribute 6 support-multiple server
Server RADIUS attribute 8 include-in-access-req
RADIUS attribute 25-application access server include
dead-criteria 5 tent 3 times RADIUS server
RADIUS-server host 10.18.4.33 auth-port 1812 acct-port 1813 borders 7 1521030916792F077C236436125657
RADIUS-server host 10.18.4.35 auth-port 1812 acct-port 1813 borders 7 02350C5E19550B02185E580D044653

radius of the IP source-interface GigabitEthernet1/0/1

The problem:

When I test the functionality of RADIUS using the following command, it fails. HOWEVER, the customer (switch) IP listed in the error log in the front door of the VLAN 20 (!):

test the aaa group RADIUS server 10.18.4.33 auth-port 1812 Capita123 user radius acct-port 1813! new-code

10.18.4.38 is the gateway IP address of the VLAN that hosts the servers of the ISE, I don't understand why its listed in error as IP device logs!

ource Timestamp	2016-06-22 16:38:02.826
Receipt of timestamp	2016-06-22 16:38:02.841
Policy Server	GLS-ISE-01
Event	5413, accounting RADIUS-Request dropped
Reason for failure	11007 could locate no device network or Client AAA
Resolution	Check if the device network or AAA client is configured in: Administration > network resources > network devices
First cause	Could not find the network device or the AAA Client while accessing NAS by IP during authentication.
Type of service	Box
NAS IPv4 address	10.18.4.38

Other attributes

ConfigVersionId	118
Port of the device	1646
DestinationPort	1813
Protocol	RADIUS
ACCT-status-Type	Update-intermediate
ACCT-Delay-Time	15
ACCT-Session-Id	00000000
ACCT-Authentic	RADIUS
AcsSessionID	GLS-ISE-01/255868885/32
IP address of the device	10.18.4.38

If I reconfigure the switch to the ISE - peripheral network and give it the IP address of 10.18.4.38 (the ip of the gateway), my radius authentication tests suddenly becomes successful.

can someone clarify the situation what is happening here?

I need to be able to define multiple switches by their unique IP addresses.

Thanks for your time

Hello

The only time I saw that it was due to use a deprecated command: radius server host. There was a bug on the IOS XR platform as well.

Could you please reconfigure your order of RADIUS by using the new command: radius server? And test again?

The doc of Cisco for the new order:

http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/iDEN...

Thank you

PS: Please do not forget to rate and score as good response if this solves your problem

Check the ISE for the VPN Cisco posture

Hello community,

first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?

Thank you!

The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.

The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.

http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-Appliance-ASA-software/117693-configure-ASA-00.html

VG224 and Verifone xx810 chip and pin component terminal modem

Hi members of the community.

I have a very specific problem I'd appreciate help with if anyone else has experienced this or something similar.

We have a VG224 that provides analog lines for fax machines mainly on our campus. Recently, we had our Department of finance use machines to chip and PIN on these connections. Previously, we used streamline machinery, and they connect properly.

The specific case I have is a Verifone vx810 machine which is connected to a VG224. The Verifone unitis able to deal with success and to authorize a transaction, but it cannot complete a download batch process or a TMS. I talked to the support company that rent us machines to and identified that the computer uses the following baud rate, bits of parity and stop for 2 different operations:

For transactions: 2400 baud, parity/stop 7e1 (this works)

For the batch upload/TMS: 19200 baud, parity/top 8n1 (it does not).

In the case of the upload of batch/TMS, the machine connects, gets a connection to the remote end to the PSTN for about 10 to 20 seconds, then he tears because the modem negotiation fails. I've read various articles on forums CIHI and others say that data rates high speed can be a problem for the VG224, but nothing to suggest a problem with 19200. I also tried installing on an ATA186 and ATA showed the same symptoms, so I am inclined to think that this isn't just a firmware issue or bug with the VG224. I tried 3 different chip and PIN machines of the model vx810 and all have the same symptoms.

Here's a copy of my current VG224 config. The VG224 is recorded in the CUCM via SCCP.

version 12.4

no service button

horodateurs service debug datetime localtime

Log service timestamps datetime localtime

no password encryption service

!

hostname vg224

!

boot-start-marker

boot-end-marker

!

forest-meter operation of syslog messages

logging buffered 4096

!

AAA new-model

!

!

AAA authentication login default local radius group

the AAA authentication enable default

AAA authorization exec default local radius group

failure to exec AAA accounting

action-type market / stop

RADIUS group

!

!

!

AAA - the id of the joint session

clock timezone GMT 0

clock summer-time recurring UTC 4 Sun Mar 01:00 4 Sun Oct 02:00

IP source-route

IP cef

no ip domain search

!

!

No ipv6 cef

!

stcapp ccm-Group 1

stcapp

!

stcapp function-access code

!

stcapp speed dial feature

!

!

voip phone service

Modem passthrough codec g711ulaw nse

!

!

voice-card 0

!

username password

Archives

The config log

hidekeys

!

!

!

interface FastEthernet0/0

no ip address

automatic duplex

automatic speed

!

interface FastEthernet0/0.644

encapsulation dot1Q 644

IP 10.1.160.4 255.255.255.0

!

interface FastEthernet0/1

no ip address

Shutdown

automatic duplex

automatic speed

!

default IP gateway - 10.1.160.1

!

IP forward-Protocol ND

IP route 0.0.0.0 0.0.0.0 10.1.160.1

no ip address of the http server

!

exploitation forest installation local6

interface FastEthernet0/0.644 source journaling

logging

SNMP-server RO community

SNMP server location

!

Server RADIUS auth-port 1812 1813 acct-port host

Server RADIUS auth-port 1812 1813 acct-port host

RADIUS 3 server timeout

RADIUS server key

!

control plan

!

!

!

voice-port 2/0

cptone GB

initial delays of 60

timeouts interdigit 60

timeout infinity ringtone

activation of the caller ID

!

voice-port 2/1

cptone GB

initial delays of 60

timeouts interdigit 60

timeout infinity ringtone

activation of the caller ID

!

voice-port 2/2

cptone GB

initial delays of 60

timeouts interdigit 60

timeout infinity ringtone

activation of the caller ID

!

voice-port 2/3

cptone GB

initial delays of 60

timeouts interdigit 60

timeout infinity ringtone

activation of the caller ID

!

voice-port 2/4

no echo - cancel enable

cptone GB

initial delays of 60

timeouts interdigit 60

timeout infinity ringtone

activation of the caller ID

!

!

CCM-manager cisco Protocol fax

CCM-Manager config server

CCM-Manager config

CCM-Manager local FastEthernet0/0.644 SCCP

CCM-Manager sccp

!

!

SCCP local FastEthernet0/0.644

SCCP ccm version ID 1 6.0

SCCP ccm 2 identifier version 6.0

SCCP ccm identifier 3 version 6.0

SCCP

!

SCCP ccm Group 1

associate the ccm 1 priority 1

associate priority 2 CCM 2

associate the ccm 3 priority 3

!

transcode dspfarm profile 1

associate the PCRS application

!

!

voice pots Dial-peer 999200

Service stcapp

port 2/0

!

voice pots Dial-peer 999201

Service stcapp

port 2/1

!

voice pots Dial-peer 999202

Service stcapp

port 2/2

!

voice pots Dial-peer 999203

Service stcapp

2/3 port

!

voice pots Dial-peer 999204

Service stcapp

port 2/4

!

!

!

Line con 0

line to 0

line vty 0 4

!

NTP server

NTP server

end

And a version of the show of the vg224:

System to regain the power ROM

System restarted at 14:30:34 CEST Wednesday 9 may 2012

System image file is "slot0:vg224 - i6s - mz.124 - 22.T5.bin".

Cisco VG224 processor (R527x) (revision 4.1) with 119808 K/K 11264 bytes of memory.

Card processor ID FHK1432F2CC

R527x CPU at 225 MHz, 40, Rev 3.1 implementation

1 voice module 24 analog FXS edge V2.1

2 FastEthernet interfaces

Configuration of DRAM is 64 bits wide with disabled parity.

63K bytes of non-volatile configuration memory.

The system of fpga version is 250027

The system of readonly fpga version is 250027

Option for fpga system is 'system '.

62496K bytes of ATA Slot0 CompactFlash (read/write)

Configuration register is 0 x 2102

This problem is really driving me crazy, if anyone can shed some light on what is perhaps the root cause of that I would be very grateful.

I would say probably yes, devices compatible PCIDSS circulating on the network IP would be the way to go and that is something that we work, but currently we have units that can communicate using analog telephone lines.

OK, PRI is clean so you must relay setup for connection of modem modem high speed work.

I would not waste time with CSPC and go immediately to SIP or H.323.

RADIUS CoA Port query of rebound

Similar Questions

Other attributes

Maybe you are looking for