Radius of stand-alone operator console

Similar Questions

• Is there a stand-alone client to start remote consoles?

  Hello

  currently I am struggling to navigate through all of the GUIs to launch HTTP console remotely on servers I want. I see it's java-based app that downloads automatically when I click to start the remote console.

  But I was wondering if there was a tool that would allow me to directly launch onoly consoles without the need to go to ISU, HTTP etc. ? This would save a lot by clicking on. I know that IBM has a free stand-alone java client which makes life really much easier to start the remote console and switch between the blades. Is there anything like this available for DELL servers?

  Tried running this jnlp but it fails with access denied without even asking for credentials... so I assumed it is only use unique applet?

  Thanks for the tips and suggestions

  I know this is an old thread, but if someone were to happen on it and see the answer previously suggested they would assume that it's impossible, but from iDRAC7 (gen 12 PowerEdge or later), you can connect to the remote console using VNC.

  Document access to remote desktop using VNC on Dell PowerEdge servers from Dell here.

• I have a (AIR-LAP1131AG-A-K9), I can set it up as a stand-alone?

  I have a lightweight access point (AIR-LAP1131AG-A-K9). I would like to use it as a stand-alone gateway (AIR-AP1131AG-A-K9). Is this possible? There are configuration changes that need to happen to make this happen? Do I need to use different operating system?

  Thank you

  Siva

  Plug the AP directly on your PC not the router.

  The best way to proceed is to comfort in the AP and make sure that the

  AP can reach the laptop via a switch or a crossover cable

  fixing directly from the laptop and the AP.

  With your cable from the console, you will be able to see if you pressed on the

  button for 20 seconds.

  By using a TFTP server to revert to a previous version

  Follow these steps to return standalone by LWAPP mode

  Download a version of Cisco IOS using a TFTP server:

  Step 1 in the IP address of the computer on which your TFTP server

  software should be from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure that the PC contains the image point (for example file

  as c1200-k9w7 - tar.122 - 15.JA.tar for series 1200 point access) in the

  The TFTP server folder and the TFTP server is activated. Monitor of the

  TFTP program to see the code for transfer to the AP.

  Step 3 Rename the access point image file in the TFTP server folder

  C1200-k9w7 - tar.default for series 1200 point access,

  C1130-k9w7 - tar.default for a series of 1130 access point, and

  C1240-k9w7 - tar.default for 1240 series access point.

  Step 4 connect the PC AP with a category 5 (CAT5)

  Ethernet cable. This must be a crossover cable if connected

  to the AP. Or ethernet cable is normal if the AP and laptop are connected

  to a switch.

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access

  point.

  Step 7 press and hold the MODE button until the status light turns red

  (about 20-30 seconds), then release.

  Step 8 wait that access point restarts, as attested by all lights

  Green followed the status light blinks green.

  Step 9 after the access point reboots, reconfigure using the graphical interface or

  the CLI.

  If the image is not download from Server/tftp on your computer, you may need to delete the previous image of tar on the access point of the console:

  Simply hold the mode button until the light is red.

  Then, by using the console port, make sure that the guest is AP: and do a show «»

  "Flash:" on the device and make sure that there is no image that begins

  "c1130-rcvk9w8-tar..." ». If there is an image that starts with who then

  Delete it with "delete flash:

• ResourceException while deploying stand-alone ADF Application to Weblogic SOA or Server Admin

  I have ADF applications that I want to deploy on the server of SOA. The SOA server is part of the field of bpmdev. While trying to deploy the application, I get the following error. Same error when I try to deploy the application on AdminServer in the same domain:

  [13: 16:14] Application deployment...

  [13: 16:25] [Deployer: 149193] Operation "deploy" on demand "SecurityGroupsCustomApp_application1" failed on "AdminServer.

  [13: 16:25] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy SecurityGroupsCustomApp_application1 on AdminServer. :.

  [13: 16:25] WebLogic Server Exception: weblogic.application.ModuleException:

  [13: 16:25] caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: IO error: the network adapter could not establish the connection

  [13: 16:25] check the server logs or the console of the server for more details.

  [13: 16:25] weblogic.application.ModuleException:

  [13: 16:26] # incomplete deployment.  ####

  [13: 16:26] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  ADF Application connects to SOADataSource that is configured on the server with the target set to soa_server1. Same application deploys in WLS integrated as a stand-alone.

  Jdev version: 11.1.1.7.0

  WebLogic Server version: 10.3.5.0

  Exception stacktrace of soa_server1.log:

  Failure occurred in the execution of the request for deployment with the ID ' 1406851753207 'for the task 9'. Error: ' weblogic.application.ModuleException: '

  weblogic.application.ModuleException:

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:327)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)

  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:648)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)

  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:221)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)

  at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 000 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 1.run(DeploymentReceiverCallbackDeliverer.java:46)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: IO error: the network adapter could not establish the connection

  at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:285)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1322)

  at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1239)

  at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:250)

  at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1329)

  at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:176)

  at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:507)

  at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:428)

  at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:280)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)

  to weblogic.application.internal.BaseDeployment$ 1.next(BaseDeployment.java:648)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)

  at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:61)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)

  at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:221)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)

  at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 000 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 1.run(DeploymentReceiverCallbackDeliverer.java:46)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Thank you.

  -Cedric

  I managed to solve the problem of deployment by modifying the deployment under the Application properties configuration:

  1. unselect Auto Generate and Synchronize weblogic - jdbc.xml deployment descriptors

  2 deselect the credentials under Security Deployment Options

  3 deselect users and groups under deployment and Security Options

  

  I think auto generation of weblogic deployment descriptor - jdbc.xml was most probably the origin of the problem.

  Thank you.

  -Cedric

• Error ADF application to a stand-alone weblogic deployment

  JDeveloper version: 11.1.2.2
  
  Question: I have built a standalone weblogic server (10.3.5.0) and am trying to deploy my ADF application on it. The deployment fails with the following message is displayed. The stand alone server, I built is on the same machine where jdeveloper is installed and I use same weblogic provided with jdeveloper install. The application works well on the integrated server. I have studied this issue and you have more or less the same answer of ADF installation run libraries. Can anyone please help me with exactly what I install and how?
  
  Thank you
  Saurabh.
  
  
  [09: 49:44] cannot determine the platform target profile. Using default
  [09: 49:44]-deployment began. ----
  [09: 49:44] the target platform's (Weblogic 10.3).
  [09: 49:55] recovery of the existing application information
  [09: 49:55] analysis of the dependence running...
  [09: 49:55] building...
  [09: 50:18] deployment of profile...
  [09:50:20] wrote on the Web for C:\JDeveloper\mywork\EmployeeTrack\ViewController\deploy\EmployeeTrack_ViewController_webapp.war application Module
  [09:50:20] Application deployment...
  [09: 50:24] [Deployer: 149191] Operation "deploy" on demand "EmployeeTrack_ViewController_webapp" boot on 'ADFServer '.
  [09: 50:26] [Deployer: 149193] Operation "deploy" on demand "EmployeeTrack_ViewController_webapp" failed on "ADFServer".
  [09: 50:26] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy EmployeeTrack_ViewController_webapp on ADFServer. : could not load the webapp: "EmployeeTrack_ViewController_webapp.war."
  [09: 50:26] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: "EmployeeTrack_ViewController_webapp.war."
  [09: 50:26] caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to ' [ServletContext@29261813[app:EmployeeTrack_ViewController_webapp module: EmployeeTrack_ViewController_webapp.war path: / alonedemo spec-version: 2.5] ", defined in weblogic.xml [Extension-name: adf.oracle.domain.webapp, exact match: false], [Extension name: jstl Specification-Version: 1.2, exact match: false], [Extension name: jsf Specification-Version: 2, exact match: false]
  [09: 50:26] check the server logs or the console of the server for more details.
  [09: 50:26] weblogic.application.ModuleException: failed to load the webapp: "EmployeeTrack_ViewController_webapp.war."
  [09: 50:26] undeployment.
  [09: 50:26] - incomplete deployment.
  [09: 50:26] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  In the colsole admin click on the name of one of the libraries, and then select the target tab and see if the checkbox for your (managed) server is set. If it's the library should be available, and you should not see the error.

  Timo

• Error during the deployment of ADF application to a stand-alone weblogic Server

  I use Jdeveloper 11.1.1.6.0 and I'm trying to deploy my application on a stand-alone server running on a Unix machine and I get the following error message:
  
  [16: 12:44]-deployment began. ----
  [16: 12:44] the target platform's (Weblogic 10.3).
  [16:13] recovery of the existing application information
  [16: 13:01] analysis of the dependence running...
  [16: 13:01] building...
  [16: 13:05] deployment of profile...
  [16: 13:09] wrote on the Web for C:\JDeveloper\PortingAppln\ViewController\deploy\ADF1.war application Module
  [16: 13:13] Application deployment...
  [16: 20:19] [Deployer: 149191] Operation "deploy" on demand "ADF1' initialization on"ADF1.
  [16: 20:45] WebLogic Server Exception: weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
  [16: 20:45] check the server logs or the console of the server for more details.
  [16: 20:45] weblogic.application.WrappedDeploymentException: oracle/jrf/PortabilityLayerException
  [16: 20:46] # incomplete deployment. ####
  [16: 20:46] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  
  Can someone help me with this problem.
  
  Thank you
  Srini.

  .. and make sure that you have installed and configured the correct version of WLS (it should be 10.3.5).

  Arun-

• Deployment problem Jdev (V 11.1.2.0.0) to stand alone weblogic v10.03

  My environment is Win 2008 Server 64. I'm trying to deploy on a stand-alone server. I've added the following adf runtime libraries:
  
  http://radalcove.com/blog/?p=34
  
  
  Created the connection to the server app and when you try to deploy the stand alone server I received the following error message. What is a missing library or another issue? Thanks, J
  
  [04: 52:18]-deployment began. ----
  [04: 52:18] the target platform's (Weblogic 10.3).
  [04: 52:21] recovery of the existing application information
  [04: 52:21] analysis of the dependence running...
  [04: 52:21] building...
  [04: 52:32] deployment 2 profiles...
  [04: 52:33] wrote the Web application Module in C: < path of the server >-< myapp > \ViewController\deploy\ < myapp >ViewControllerwebapp1.war
  [04: 52:34] wrote it Enterprise Application Module to C:\jdev_backup\mywork\ < myapp > \deploy\ < myapp > _application1.ear
  [04: 52:34] Application deployment...
  [04: 52:37] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy < myapp > _application1 on AdminServer. : could not load the webapp: "" < myapp > - ViewController - context-root '. "
  [04: 52:37] [Deployer: 149193] Operation "deploy" on demand "< myapp > _application1" failed on "AdminServer.
  [04: 52:37] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: "< myapp > - ViewController - context-root"
  [04: 52:37] caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to ' ServletContext@9558442[app: myapp > _application1 module: < myapp > - ViewController - root context-path: / < myapp > - ViewController - context-spec root-version: 2.5] ", defined in weblogic.xml [Extension name: jsf, Specification-Version: 2, exact match: false]
  [04: 52:37] check the server logs or the console of the server for more details.
  [04: 52:37] weblogic.application.ModuleException: failed to load the webapp: "< myapp > - ViewController - context-root"
  [04: 52:38] undeployment.
  [04: 52:38] - incomplete deployment.
  [04: 52:38] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  http:///AppTest-ViewController-context-root/test.jsp
  

  you do not have use "/ faces" he loves

  http:///AppTest-ViewController-context-root/faces/test.jspx
  

  http://CN.forums.Oracle.com/forums/thread.jspa?threadID=1123275

• VI compiles in stand-alone with a menu of the runtime application

  I have a VI I am compiling in a stand-alone application, but unfortunately this error when I try to compile the application:

  Error 1 ganglion invoke in AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. = OR-488: command requires GPIB controller charge controller.

  Method name: Linker: writing Info file

  I'm fairly certain that this error occurs due to the addition of a custom menu DURATION in VI.  This same exact VI generates an application without any problem, if I just change the DURATION back to the default menu.

  I tried to add the file menu of performance at the library of projects, but that did not help anything.

  It's very confusing to me.  I've built applications that uses the custom menus runtime before without any problem and may not know what is different about this situation.  Any help would be appreciated.

  For all those who can find it in the future:

  Fix LabVIEW installation on my computer fixed the problem immediately.  Now I can compile the same program by setting the menu of the runtime on the front panel, as opposed to directing it to an external file programmatically.

• Using an FPGA as a stand-alone system to run labview 2012

  Hello

  I have a request for my main project which is built using Labview 2012 and I want to transfer to a FPGA as it becomes a stand-alone system with no attached PC. I saw that labview for this but I do not know what card FPGA and the labview libraries are able to do this, and what is the mechanism to do this.

  Software details: LabVIEW Professional Development System version 2012
  Operating system: Windows 10

  T2dei wrote:

  What about Xillinx Zedboard? Y at - it approach to transfer of LabVIEW code directly without the conversion, in the zedboard?

  N ° Code LabVIEW FPGA only works on FPGA boards OR.  If you give us a better idea of what your project and what you want, we could probably give you a better recommendation.

  Furthermore, since this is for reasons of the student, give your representative OR a call and maybe they can cut you a deal on a Board sbRIO.

• Said updated stand-alone Windows Setup program do not apply to this system.

  I tried to download and reinstall the stand-alone windows installer, but get the message that no update available for this system or this download does not apply to this system.  Standalone Installer, I think it's a system XP instead of Vista Home Premium 32 bits of the system. How can I uninstall the stand-alone Windows Installer and install one for Vista?   Is it important that I have a desktop computer that has XP on it?  I also rename the laptop with the Vista program to my name. Is it relevant. I tried to reverse the name

  Hi Rockyakauke25,
   
  Welcome to Microsoft answers community forum!

  This day stanalone you trying to install?

  Try to install the update in safe mode.

  Try to install the update in safe mode and see if you are able to install. Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  To start in safe mode, follow the steps below:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2   , do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options , use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see Advanced startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  Install the prerequisite updates before applying a new update that is installed sp 1 for a successful installation sp 2.

  See the link for download of SP1 and installation

  http://TechNet.Microsoft.com/en-us/Windows/bb738089.aspx

  Try to run the system update readiness tool before installing the SP1 or SP2.
   
  The system update tool:
  http://support.Microsoft.com/default.aspx/KB/947821
   
  A software update is available for the Windows Vista installation:
  http://support.Microsoft.com/kb/937287
   
  Then download and install Service Pack 2:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en
   
   
  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• How can I control external devices using a stand-alone touchscreen with a LabVIEW app

  For my senior project my group design and created a vehicle for extended range hybrid with 90 Li + battery which is charged by a 15 kW generator and/or who is also charged by a 5 kW fuel cell. Currently, our system is able to measure the tension on batteries and display them on a laptop via LabVIEW. To process these data, we use a cRIO FPGA. What we would like to do now, is having a touch screen for the pilot to choose which loads of source of battery power so that monitor a pressure reading from the fuel tank.

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  Sorry for the question as much. Any help with the answer. Thank you!

  This looks like a very interesting project.  If you are interested, National Instruments organizes an contest of Design student where you can win cash or a trip to Austin for NIWeek.

  steve215 wrote:

  What kind of touch screens to LabVIEW to be downloaded on and used for controls?

  NEITHER sells computers touch screen that can be used to control LabVIEW applications.  You can find more information here: HMIS and industrial touch panels and here: LabVIEW Real-time and Touch Panel Deployment and replication resources. Our computers 6-inch touchscreen , run Windows CE, programming on them is a little different from the programming on a full Windows operating system.  You can find useful getting started with LabVIEW Touch Panel Module .

  You can use third-party with the LabVIEW Touch Panel Module devices, although it takes a deployment license for it.  More information can be found in the getting started guide.

  If you were able to send the information of cRIO on a network (which according to your description, seems unlikely), you can use a smartphone to control your application.  More information on our community of Smartphone group.

  steve215 wrote:

  A cRIO has the necessary capacity to supply such a screen and handle the transfer of the data from the sensor fuel and relay (for turning on and off will deepen)?

  If you use the 6-inch touchscreen panels, they need 18 to 32 VDC (the fuse becomes an open circuit if the input level exceeds 33 VDC).  The transfer of data from the switching relay can be monitored and changed with the touch screen.

  steve215 wrote:

  Do I need an additional license to create stand-alone applications and how I would go about creating a stand-alone application?

  If you have traveled the road of the touch panel, you need to purchase the LabVIEW Touch Panel Module and a touchscreen.  Touchscreens OR have a touch panel deployment license.  Guides step by step to create the stand-alone application are in the getting started with LabVIEW Touch Panel Module .

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• I run the stand-alone windows installer to thr and displays the error code 0 x 80240009

  When I ran the windows update stand-alone installation, it updated kb947821 hotfix, but after he would not install updates

  0 x 80240009

  WU_E_OPERATIONINPROGRESS

  Another operation in conflict was underway. Some operations such as the installation cannot be performed twice at the same time.

  Restart and try again.

• CSP Web registration with default stand-alone CA

  I have a stand-alone certification authority. I understand from my research I can't use templates with it, so I wonder if there is a way to force the default CSP coming to a user tries to use the web interface to request a certificate. On the advanced certificate request page, some client machines choose Microsoft Enhanced RSA and AES Cryptographic Provider by default, some choose Microsoft RSA SChannel Cryptographic Provider. They have the same (Win 7 x 64) operating system and the browser (IE9).  So far, I've been unable to determine why they choose one or the other. Can anyone help?

  Hello consult Hyperion,

  I think that TechNet for Windows Server forums would be best for your questions.
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  For questions about certificates, safety category would be the place to post.
  http://social.technet.Microsoft.com/forums/en-us/winserversecurity/threads

  Thank you!

• How to move a stand-alone series C of Cisco UCS managed service profile without losing any data?

  Hello

  We currently have a stand-alone series cisco C with 2012 Windows Server installed on the local disks.  We need to go this Cisco UCS server managed with a service profile, but can not lose existing data and the method of operating system boot.

  Does anyone know how to do this?

  Thank you

  Hi Adrien,.

  To be able to accomplish this together the local drive to 'any Configuration' policy this way UCSM won't overwrite the current raid on the server configuration.

  See the link below

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config...

  Let me know if that helps

• Battery to reboot a stand-alone switch

  Hello:

  I have a Cisco WS-C2960S-48TD-L with 12.2 (55) SE2.

  It is not a standalone switch, battery and with no order it restarts automatically looking for a new election of master. Logging I have nothing, but connected with the console cable, I see after 2 minutes do not show anything what follows:

  Waiting in the elections of the Stack Master...

  ...

  The switch restarts and:

  ...

  * 00:00:12.289 Mar 1: reading env - LICENSE_BOOT_LEVEL = variable

  * 00:00:12.949 Mar 1: % IOS_LICENSE_IMAGE_APPLICATION-6-LICENSE_LEVEL: name of the Module = restart level according to lanbase and License = lanbase = c2960s_lanbase

  * 00:02:02.342 Mar 1: % STACKMGR-4-SWITCH_ADDED: 1 switch has been ADDED to the battery

  * 00:02:03.674 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, state change downstairs

  * 00:02:04.686 Mar 1: % SPANTREE-5-EXTENDED_SYSID: extended SysId enabled for type vlan

  I have no battery-cable connected, because it s not going to be another switch on battery. The previous state of the default configuration of the stack is:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 1 1 ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  After searching online, I have no seen anything to disable the functionality of the battery so I set the priority for the "switch 1" to 15 and set switches 2, 3 and 4, no provision, although this toggle Don t exist:

  #switch priority 1 SW_ACCESS (config) 15

  The priority of switch selector number 1 to 15

  Do you want to continue? [confirm]

  New priority has been correctly set

  SW_ACCESS (config) #no pass 2 supply

  SW_ACCESS (config) #no switch 3 available

  SW_ACCESS (config) #no switch 4 planned

  The State of the battery is the next right now:

  SW_OSIATIS_SERVERS #sh pass in detail

  Switch/battery Mac address: b8be.bfcd.2b80

  Current H/W

  Switch # Mac address priority Version State role

  ----------------------------------------------------------

  * 1 master b8be.bfcd.2b80 15 1 Ready

  Battery nearby Status port

  # 1 Port 2 Port 1 Port 2 Port switch

  --------------------------------------------------------

  1 against against none none

  With this new Setup, the switch has rebooted again.

  Why on a stand-alone switch stack is restarted my system?

  Is it a function to turn off the battery?

  Thanks in advance

  SW_ACCESS uptime is 35 minutes
  System returned to ROM by power-on

  Looks like his power.