RAID 5 server card intel S5000VSA with AXXRAKSW5 Activation key

Similar Questions

• I have a computer that runs XP and used to run on Vista. The computer came with an activation key for Vista. What should I do if I want to return it to Vista?

  I bought a brand new computer, so I can't remember if it came with a Vista installation CD or if this content is available online. As far as I know, the activation key was initially registered under my name.

  Also, if I succeed at, go back to what it will do for installed programs. Should I install them again? What about programs that come with a limited number of licenses, as a McAfee antivirus?

  Hello

  If you reinstall vista, you must reinstall all THE programs

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I wish adope photoshop element 5 par UN privilege to install car I lost my installation cd and I found my wallet with my activation key

  Hello

  can you Send a privilege to install photoshop element 5, because I lost my cd installation English, but I have my activation key.

  Hello

  Download Photoshop Elements 5 is not available because it is very old version.

  Kind regards

  Sheena

• Satellite NB10t-A-101 - problem with graphics card Intel using Win 10

  After I upgraded to Windows 10, The graphics card worked fine, at least 4 months later, I saw that the Intel Graphics tray icon was missing when I went into device manager he had a small exclamation mark by it and said

  Your computer's system firmware does include enough information to properly configure and use this device.
  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35)

  Then, I looked a little further into the problem and found this:

  Problem code: 00000023
  The problem: the resources for this device in conflict with the MCFG table.
  C0000908

  I have not edited the PC somehow, any solution to this problem
  Specifications of the PC (if needed)

  Model - NB10t-A-101
  Processor - Intel Celeron n 2810 @ 2 GHz
  Graphics card: Intel HD Graphics.
  RAM - 4 GB

  (Another note: I need the last generic graphics driver for Windows 10,)

  If Win10 supports the Intel HD graphics chip, a driver will be available in Windows Update.

  Check if your HD from Intel is compatible:
  http://www.Intel.com/content/www/us/...000005526.html

• ESXi 4.1 update 1 and Raid 3ware 9550SX card

  As the title says, I'm trying to get a raid 3ware 9550sx card work with ESXi 4.1 update 1.  I tried to load the drivers from the card via the CLI and in the end, received a message "host not was not updated, no change not required.  Newsletter from skip AMCC_2.26.08.035vm40; It is installed or obseleted. »

  However, when I try to find the raid controller of adapters for storage, the VIClient Configuration tab, I don't see it.  I do something wrong, is the driver included in this version of ESXi (I'm on a new installation started from a USB key) or is there another step after installing the driver I am skipping until I can see the map and use drives connected to it?

  Thanks for any help,

  Ryan

  Well, I have work.

  Here's what I had to do:

  Follow the instructions here free: http://kb.lsi.com/KnowledgebaseArticle15548.aspx

  They are a little dated, but they get the essential overall.

  He suggested significant changes to the CLI:

  Add a c - to order.

  So, I found myself running:

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin > vihostupdate.pl perl-Server x.x.x.x - root username - password rootpassword - b D:\Sandbox\3ware\offline-bundle.zip-i c

  Regarding the out-of-line-bundle used: take the file listed for the 9550 for ESX(I) non - here: http://kb.lsi.com/KnowledgebaseArticle15753.aspx#vmware

  There should be a link to VMware_noncertified_ESX_and_ESXi_4.0_GA_4.0_u1_4.1_GA_4.1_u1_driver_and_twcli_for_9500s_9550sxu.zip

  Inside, it is a 3w - 9xxx.iso (a tw_cli)

  the off - bundle.zip extracted the ISO and use it.

• Can I replace the video card Intel (r) 915GM/GMS in Satellite M70?

  Hello!

  I have a TOSHIBA Satellite M70, with video card Intel (r) 915GM/GMS (256 MB) that is not working properly (it might be made of the mechanical shock or high temperature, do not know, but I'm sure it's something on the hardware). I reinstalled my OS (and then replaced by another), updated my drivers but nothing changes. Then appears a BSOD evoking the video driver files I try to restart it many times because the screen guard shutted down (in black). Now, the video card is disabled, and it works normally. I want to just replace it if it is possiblle. I said * TOSHIBA Satellite M70, Intel (r) 915GM / GMS *.

  Thanks for your answers in advance, and sorry for the mistakes (I'm not English)!

  Hello

  Please read carefully this document http://aps2.toshiba-tro.de/kb0/FAQ7A01ZW0007R01.htm
  You can find answers on GPU upgrade/Exchange.

  Good bye

• wireless network device no 104 during the replacement of Intel 3945agb with Intel N 1030

  When replacing the wireless Intel 3945agb with Intel N 1030, the message card "wireless network device 104 undetected." system stopped. remove device and restart" appears.

  Intel ensures that these 2 cards are compatible.

  Model: DV-6600 series (DV-6660eb), built in 2007.

  Vista Premium (32 bit)

  No change on HW and SW since it was purchased

  BIOS: F5A (latest version according to HP, 2010).

  How to activate the wireless card Intel? (Download the BIOS of recent products with N 1030, such as DV6-6xxx 1xxx G6,...) ?

  Thank you

  solved flashing BIOS with whitelist F.5A deleted:

  http://www.BIOS-mods.com/forum/thread-HP-disabled-whitelist-mega-thread?page=15

• What type of graphics card intel is included w/the envy 15 t select w / 4200 m processor

  graphics card intel comes w / the 4200 m processor. is it the same thing as the 4200u?

  The selection of 15 t - j1000 comes with Intel HD integrated graphics based on the processor card and you can also order a discreet NVIDIA 740 M or 750 M card. The i5-4200U is a CPU ultra-low-power and comes with Intel HD 4400 graphics designation. The i5 - 4200M is a higher powered mobile processor and comes with the designation of Intel HD 4600 Graphics. Please see CPUBoss-i5-4200U vs i5-4200 M for a comparison full side-by-side two processors.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Impossible to update graphics card Intel® HD 4600 for 4th generation Intel® Core™ processor

  Update driver Intel HD Graphics 4600 moved not despite the Action Center, prompting me to date Win7 SP1

  Every time that receive the error code 80070103. Really annoying, getting same alert update every time it's impossible to do. Please help me with this problem.

  Plug
  OS: Windows 7 SP1 - 64 bit

  Processor: Intel Core i5 - 4330 M CPU @ 2.60 GHz

  RAM: 4.00 GB
  Graphics card: Intel (r) HD 4600 Graphics
  Lenovo ThinkPad L440

  Error 0 x 80070103 - if it is an update of the graphics driver, see if that helps - https://support.microsoft.com/en-us/kb/952032

  Or if his appearance in the W7 update and this is just an update of the driver, the hide - http://www.sevenforums.com/tutorials/24376-windows-update-hide-restore-hidden-updates.html

  You better get the updated drivers from the support site for your specific model of the PC or GPU, rather than Microsoft.

• C220 FlexFlash card only comes with partition HV

  All documents, including installation guide shows that the FlexFlash card should ship with four partitions: HV, HUU, UCS and drivers.

  Mine has only the HV partition.  This was not a problem since I started from HUU and UCS as virtual drives if necessary, but as this is a new server, I'm afraid it might be a hardware problem with the card.

  It's a c220 UCS, built to TRC1 M3.

  Is this normal or something I should dig deeper before?

  Screenshot of MMIC config showing 1 only virtual drive connected.

  Thanks for the tips.

  Hi Kodotten,

  A single partition is expected from firmware version 1.5 (4)

  Pre-installed memory card Flash Flexible Cisco overview

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/release/notes...

  From this version, the SD storage device available to the MMIC as a single partition hypervisor (HV) configuration. Earlier versions had four virtual USB drives.

• 17 t j000 touchsmart forcing skyrim use nVida video or turn off the graphics card intel

  Hi all

  I just got this new computer and try to make it work with the game Elder Scrolls v Skyrim   the game starts and runs ok however by default is of poor quality with video intel detected 4600.   Don't want to use the video intel when even, so no matter not much.  I want to use is the video card from nVidia to 740 m.

  I went into the NVIDIA Control Panel and things together global use the nividia card, in program files, I put all the exe files of the game to use the nvidia card.   I entered skyrimprefs and sd3ddivice to change sD3DDevice = "Nvidia GeForce GT M 740" when I start the game it resets the video at the bottom and when I look at his still trying to use the card intel.  The skyrimprefs file is more written with sD3DDevice = 'Intel (R) graphics HD 4600'.

  So the question is how to get the game to work with nVidia card?  Or how to disable the card intel?

  Went into device manage and disabled the graphics card intel and skyrim can't always find the nVidia card. It uses Microsoft basic pilot to return instead.  A difference that I noticed is the base of Microsoft driver it will default the video quality of average quality rather than low quality I get with the 4600 built in processor video card.

  PROBLEM SOLVED

  I was running enb and needed to use the version of the injector instead of the version of wrapper.  the file d3d9.dll in the wrapper version forced things to use the graphics card intel.

• 10.1.2 iMovie crashes while editing. Failed attempts to re - open. Open with the option key down key allows you to delete the preferences but contains a relative error incompatible graphics card will then appear.  With the help of El Capitan

  iMovie 10.1.2 falls down during editing of a film, usually by doing something like adding a title or a transition.  Failed attempts to restart.  Try to reboot with the option key + command allow you to remove preferences.  Then either receive an error indicating that the graphics card is incompatible or the application block requiring a force quite.  Restart or stop the iMac translates the suspended system requiring a manual stop holding down the Start button.  Restart in Safe Mode and then the normal startup will allow iMovie to load.  But after a few minutes of work with the program, it crashes and scenario again.  I use El Capitan 10.5.11 on an iMac of 2013.  I deleted the iMovie app and reloaded it, no change.  Someone has an idea for a fix?

  What are the specifications of your clips you want to change? Try to create a new user and see if FCPX is behaving.

• What graphics card is compatible with my presario sr1710nx pc.

  What graphics card is compatible with my presario sr1710nx pc?  The current one is dead and I get nothing on my screen and I tried to connect another monitor and still nothing.  So I guess it is the graphics card.

  Hello:

  It is an old model.

  The form of State that he took (integrated graphics).

  If you are sure it is just the graphics that is kaput (you would like to know if you can hear the Windows startup and logon music sounds or something) then...

  I'd get a used Dell Radeon HD 2400 on eBay that should work for you very well, but you will need to have a monitor with a DVI connection and DVI cable.

  This is the cheapest I could find.

  http://www.eBay.com/ITM/ATI-Radeon-HD-2400PRO-256MB-PCI-Express-video-card-ATI-102-B17002-B-used-/121232926546?PT=PCC_Video_TV_Cards & Hash = item1c3a0ba752

• Help! I disabled my graphics card intel on my y510p

  I feel pretty stupid. My Nvidia Control Panel does not work, so I looked for a solution online. Someone said to turn off the graphics card intel (so the system would default to the 750 m from Nvidia). I tried this and my computer was very weird. The functions of the menu (windows 8) start very well, but nothing works to the level of office. I can move my mouse and click on the icons and menus on the taskbar at the bottom of the screen, but no programs will open. I tried to navigate on my control panel through the start menu and still nothing happens. Can I do to solve this problem? Can I re-enable the onboard graphics via safe mode or something?

  Naturally, it did not fix the Nvidia Control Panel either...

  Thanks to you two, I restored my laptop and the problem is solved. It took me awhile to find the Novo key but, I didn't know yet that it's there!

  Thanks again!

• Impossible to use Intel widi with my Satellite L50-A-11 t

  Hello

  I have a Satellite L50-A-11 t and I tried to use Intel widi with 8.1 of Windows and does not work, it says that the system is not compatible.

  With Windows 8 it was ok and it worked very well, but in the apparell for the upgrade it supposed to remove Intel widi.
  Why is this?

  Thanks in advance.

  Hello

  I found this important info in the knowledge base of Toshiba:

  Important notice for users of Wireless Display (WiDi)
  http://APS2.toshiba-tro.de/KB0/TSB3903IF0000R01.htm

  There, you can find this info:
  * Intel Wireless Display is no longer supported on Windows 8.1*