RAID of UN in da Dictionary 1 by backup UN disco

Similar Questions

• How can we change the RAID of FAST Safe on a new series of Thunderbolt 2 LaCie 2big. I have a Lacie pin tool in the box, but it does nothing next to selected options and lights. Thank you.

  I just bought a new MacBook Pro and a new crush LaCie 2big 2 series of RAID hard drive to use for Time Machine backup.

  LaCie drive is provided as parameter RAID FAST so I would change to SAFE my back to the top is mirrored. I opened the case of money, that you can see, and then select the options of raid and light is FAST, as well as other RAID options below, followed by CONFIRM.

  I have the lacie in the box tool, PIN, but it does nothing. Nothing happening however hard I put it in the select, I tried a paper clip too. Nothing happens.

  Also nothing on youtube, nothing on the site Web of Lacie, nothing anyone actually changes on the disk. Nothing in the instructions.

  Pain right. Any ideas? Thank you.

  Contact Lacie/access to their support site. It is their material.

• NAS312 raid 0

  Hello

  I have a readynas 312. Is it possible to change this setting for raid 0? I use it as a backup of my homeserver.

  There are 2x2gb, I want to have the 4 GB.

  Thanks for the help,

  Mark

  go to volume and destroy

  Disable x-raid, and then create a new volume, selection of raid 0

• Segnalazione HD RAID 1 - Power Edge 2900 server

  Company Supporto Tecnico,

  He con Power Edge 2900 oggetto della present e misconfigured server RAID 1 ed a RAID 5.

  Da at least one week sul disco 0 (HARD DISK, 146G, SERIAL ATTACHED SCSI, THE, 15 k, 3.5, SEAGATE, 15K) he drove a DX causa con lampeggia cadence regolare, con UN colore arancio.

  Da precisare che sul display del server no device nessun allare, e di fatto he sistema sta funzionando correctly.

  Yet I like to know it tipo di problemática present e quali inizative e necessario h.p.p..

  Speaking saluti.

  Antonio Morrocchesi

  Buongiorno,

  Dal led lampeggiante sembrerebbe arancione it disco che e fits in stato "failed." Per poter fare una precisa del problema più diagnostica, invito form answer it by turns out supporto a pagamento da Dell. www.Dell.com/.../SS

  Saluti

  Marco

• Replace disk in a RAID 6 array

  Hello

  I have a PE T610 with controller raid H700, 2 drives in RAID-1, and 6 disks in RAID-6 table. One of the disks in RAID-6 is display of media and other errors. The reader is still online but I have problems with it and want to replace it.

  Device ID pregnant: 32
  Slot number: 4
  Player position: DiskGroup: 1, length: 0, arm: 2
  The speaker position: 0
  Device ID: 4
  WWN:
  Sequence number: 2
  Media error count: 17
  The number of other errors: 145
  Predictive failure count: 0
  Latest issue of Predictive Failure event Seq: 0
  PD type: SATA
  Base dimensions: 2,728 TB [0x15d50a3b0 sectors]
  Nonauthoritative dimensions: 2,728 TB [0x15d40a3b0 sectors]
  Under the constraint of size: 2,728 TB [0x15d400000 sectors]
  The firmware status: online, spun up
  Peripheral Firmware level: CC4B

  Readers are HotSwap. My question is, can simply unplug the drive and the new one or I need to use megacli to first turn off the line like this:

  megacli -PDOffline -PhysDrv [32:4] -a0
  

  megacli -PDMarkMissing -PhysDrv [32:4] -a0
  

  megacli -PDPrpRmv -PhysDrv [32:4] -a0
  

  Thanks in advance for your help.

  You should be able to just replace the drive and rebuild automatically.  That said, before you do anything, make sure that your system is fully backed up.  RAID is redundancy - NOT a substitute for a backup current, functional, verified.

• VM Workstation 7 RAID 0 error

  Hello

  I have VM Workstation 7.1.4 build-385536 on a RAID 0 array

  (2 x 1 TB drives, less than a year) and worked perfect.

  Today, I turned on the VM machine and as soon as the windows loading screen appears I get the error:

  Operation on the file 'G:\Virtual Machines\New book DC\New book DC.vmdk' failed'.

  If the file is on a filesystem rmote, please make sure that you have a network connection

  and the server on which resides the drive working properly. Try again/demolition/continue.

  

  (A) the virtual machine is on a local disk

  (B) the VMDK etc. is still in its original directory.

  As soon as this error I get a pop-up balloon saying:

  "RAID Volume errors-

  Some requests for data on a hard drive in a RAID 0 volume failed.

  but a backup is possible. Please try to back up data immediately.

  

  Then, I go to my Intel (R) Matrix Storage Console and get below

  

  I right click the Port 0 and Mark as usual and there is normal, but when I turn on the virtual machine I have all the

  the errors above again

  Im not to use virtual disks comes from physical disks...

  and can no longer load windows

  Thank you

  Looks like your physical disk starts to go wrong.  Probably one of your comments hard files is located on the failed disk.

  Unfortunately, RAID0 offers no redundancy.  Start copying the data in your table now and hope that you will find most of it.   Consider going with RAID1 when you replace your drive down so that it can survive a single drive failure.

  On a side note, I have the exact same two Samsung drives in my table of RAID1 House and another recently failed for me too!  Waiting on the RMA replacement now.

• Mountpoints for Oracle - Raid 10

  Is it possible to have 1 mointpoint for all database files & redo with RAID 10?
  RAID 10
  / u01/app/Oracle-> binary, the ControlFile 1 copy, redo 1
  / u02/oradata -? 2 control files, repeat 2, all database files
  
  RAID 5
  / U03/Backup-> copy for local backup, Archivelogs
  
  I'd rather have the archivelogs in Raid 10 and can be separated from a backup. But they want this way for RMAN backup!
  Also not satisfied with just/U02 for all DBF files.
  
  What are the disadvantages of this approach? Instead should go with several mount points? Any thoughts?
  
  Thank you

  The Division looks OK, it is now for you to know the appropriate dimensions. I don't know 600 GB will be sufficient to store the files of the disk recovery (I'm even sure that this is not enough). Links that I have provided tips to choose the right size for FRA, but anyway not knowing the generation of redo etc is not quite accurate.
  Best regards
  Phil

• How can I download my photos iphone of the icloud on my Mac?

  I just started using icloud for storing my photos and videos to increase the capacity of my phone.  I do not use the storage cloud in general, but I kept running out of space on my phone.  Very frequently, I plug my phone into the family mac to get my pictures on my phone.  When I did on this occasion, the Photos he has photos to import.  I know that I have 3 GB of photos I have taken on the phone last week, so I know there are pictures.  I like iCloud is in fact a connection with the phone that I was expecting.  The icloud is just virtual storage, so must appear as if it were part of the unit that we.

  The Mac family uses on behalf of Apple to my wife.  Family photo library is under his account and is stored on RAID discs that are recycled off site for backup and storage protection.  We do not iCloud on our machines at home.  I thought that it would be harmless enough to use it for short term of photography on the phone storage.

  So, finally, the question is, how do I get the pictures on my 'virtual' phone and in the library?

  Thank you
  Mark

  You can download the photos to iCloud instead of from the iPhone.

  On your Mac, open the web interface for iCloud to www.icloud.com and connect you with the same AppleID you use on the iPhone to your iCloud photo library.  Open the Photos.app on this page and select the most recent photos in all photo album.

  You can select a range of photos at once by selecting a single photo, hold down the SHIFT key, selecting the last pictures.

  Then click on the download button.

• Question related to the backup server

  I have Dell server, but my Raid card fails. I want to take backup of my data.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Setting up the second hard drive preinstalled

  I have a Pavilion m9250f equipped of Windows Vista 64-bit with two 500 GB hard drives.  The first hard disk is almost at capacity (available 15%), and I want to know how to set up the second disc for use.

  Hello

  The SATA controller mode setting is in the bios. F10 will get you into the bios. Back up your data before attempting to make any changes.  If you use the RAID mode then then you will need to enter the Intel RAID CTRL + I utility at startup to disable the parring.  RAID 1 is extra protection in case you have a hard drive failure.  If you disable the RAID 1 parring so be sure to perform backups at a frequency you can live if you experience a hard drive failure.  When the RAID 1 parring is disabled, then the second hard drive will be available for data storage (more than 500GB).  If get you there, then you can do a quick format on the second hard drive.  Now you should be able to move the folders you want to the second hard drive.

• License after restoring issues?

  I have a Dell T310 with SBS 2008 that I intend to upgrade a S300 controller to controller H700.  I intend to:
  1. mark and pull the current readers, then controller S300.
  2. install the H700 and put in place a disc of 2 TB as a RAID-0 and restore to ensure that the backups are working.
  3. remove the 2 TB drive and set up the disks in RAID-5 on the H700
  4 restoration.

  Question:
  Ther e will have problems with the restoration of SBS 2008 license?

  Thank you!

  It should not be licensing issues.  Even the mere fact of the evolution of controllers and disks should not be enough for the kickoff of activation again.

• New fund build-spirit he seeks more and offering advice?

  Thanks for the research!
  Been using PP forever, but this is my first build, very honestly, is a new territory for me so this is. In the hope of building a 4 K (DVX200) crushing machine.

  Microsoft Windows 10 Pro 64-bit

  Intel Core i7 - 6850 K 15 M Broadwell-E 6 - Core 3.6 GHz LGA 2011-v3

  X 99 - A LGA 2011-v3 Intel ASUS X 99 SATA 6 Gb/s USB 3.0

  MSI GeForce GTX DirectX 12 GTX 1070 1070

  G.SKILL Ripjaws V Series 32 GB (4 x 8 GB) 288 - Pin DDR4 SDRAM, DDR4 2400

  EVGA 220-P2-1000-XR 80 MORE Platinum 1000 W

  C drive: SAMSUNG 850 PRO 2.5 "SATA III 3D Vertical 512GB internal Solid State Drive

  Video players: (2) WD Black 5 to Performance Desktop hard drive

  Content and Cache (2) WD Black 1 TB Performance Desktop hard disk drives

  Corsair Graphite Series 760T Black Full Tower

  * recommend RAID 0 for 5 disks to?

  recommend case fans and how much?

  * PS Fan?

  This look like a good Setup? Am I missing something? Something is improvable reasonable $$?

  The 1070 nVidia will be able to monitor the two Dell 2407 s @ 1920 x 1200 and a 4K car or do I have to add a second card?

  Thanks for any help you can offer!
  Curtis

  the key with any of these i7 processors is to overclock to 4 ghz +. This requires a good reserve of power and cpu cooler. you list a great psu, but I do not see a CPU cooler. something like the noctua d15s is a good air cooler, it requires a second fan for higher overclocks. I love air because there are fewer potential problems, but if you go for the great extreme overclock you a cooler liquid, something with a rad 280 or 360mm.

  CPU: unless you need 40 lane pcie card pcie 4-5, the i7 - 6800 k (28 tracks) is a good way to save money. These 6 core cpu's entry 4 k, so if you are looking for more than a "machine to grind" you can look at the core i7 - 6900 k 8.

  MBD: I've got consider getting the 99 refreshed motherboards, like x 99A x II. a big change in the new versions are how to divide the pcie channels. You can review the asus motherboard Web pages or manuals to compare the differences.

  RAM: closer something speeds ddr4-3000.

  GPU: If you plan to use lots and lots of lumetri and fx gpu, the gtx 1070 will help with those, otherwise the 1060 gtx will manage a decent amount of gpu fx and lumetri and save money. in general the 1070 gtx is a better match with the 8 core cpu for first. According to me, one of these cards will be your 3 monitor configuration, but I can't confirm first-hand. If there is a problem, you could get a second cheap video card (if its nvidia another card, configure the first don't not for use with the nvidia Control Panel), or if one of the screens is to play full-screen, you could watch a display card blackmagic, aja or other.

  PSU: excellent choice. If the budget and only done light overclocking, the G2 model 850w however will help reduce costs.

  the number of case fans will depend on if you go to a quieter system and style fan gpu and cpu cooler overclocks. more like 140mm fans can be a little quieter while still moving a decent amount of air. Some brands of fans are also quieter or noisier and have different RPM. Noctua fans are some of the quietest it's why their air coolers are also so quiet. If you go for a system at rest with low to average overclock on air, you can keep the lid on noise to keep down. more the overclock cpu, the airflow more is necessary to keep the freshness of the motherboard. so higher overclocks can be necessary for some fans in the upper part. with a cooler liquid such as exhaust at the top, you can test the rear fan as a dose. with a cooler of air exhausting from the back, you may be taken from above. If the gpu uses a fan of style, like the founders of edition-reference design, then it will help to keep the heat out of the housing of the computer and can help reduce the amount of necessary fans or lower the fan speed. the double or triple gpu fan will be quieter and some will be out even their fans gpu if its not hot enough need them, but they also drain most of the heat from the gpu in the case. If you run the fan on the motherboard connections and you do not use the case fan controller, you can use fan splitter adapters or card ASUS fan extension, if the motherboard supports.

  storage: the samsung pro is great. If you want to save money, the evo may be sufficient. a lot of small cache files will be difficult (slow) for hard disk, where as ssd manage very well. so you can place the first cache on the disk for the OS/applications. If you don't want or need a lot of cache space, you can get a second ssd for dedicated cache. make 2 x 5 TB raid wd can be performed with the motherboard and should work fine. If you are looking for max performance or just a real raid card, then you should watch company records and Areca raid card. No raid raid, motherboard or card, you must have a backup of all important data on the raid. you only need the raid to be fairly big for the media and current projects, and then unload on a storage/backup drive when finished. If you don't have a 10 TB of space for ongoing projects, you could go with smaller hard drive to save money. If the active project space is small, you can also watch some samsung 850 evo. for the backup/storage drive, I would recommend a single drive archive / company for better reliability. If the backup data are really important, you can keep another copy in a similar external disk.

• PowerEdge 2950 HARD drive failure

  Hello

  Sorry for the newbie question, but I have the following scenario (where I have no experience dealing with the old servers)

  We have a set of old servers (DELL PowerEdge 2950) that migrate again (IBM X Flex), one of the old server is MOSS 2007 with 2 HDD, suddenly primary HDD is dead and in menu missing with setup. I removed old server on another HARD drive and mounted on the MOSS 2007 server and initialized. the question is how do I replace the HARD drive died with a new one and copy another disk configurations HARD live

  Please if you need more information just ask in answers because am new on this servers with 0% experience

  Thank you

  ---------------UPDATE-------------

  the current RAID is RAID 0 and I found that a backup windows (from previous system admin) file so it is possible to format the two HDD, configure RAID for RAID 1, install windows, and then restore the backup?

  also, I was reading this article " " but I couldn't change the RAID, so any suggestion?

  You need drivers ("hard drive" version, run to extract before use):

  http://www.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=GHNKT&FILEID=3000719989&osCode=WNET&ProductCode=PowerEdge-2950&LanguageCode=en&CategoryID=SF

• Virtualizar fisico servidor con converter

  Buenos dias,

  Tengo than virtualizar a CentOS Server con converter y tengo una duda, el servidor tiene discos duros in RAID1 back fisico y don't be TR al virtualizar el servidor Converter respetara RAID1 o el me creara back discos por separado, estoy a poco dudoso como Sera el behavior in this case.

  MUCHAS gracias.

  Hola,

  in principio "todo apunta" an el efectivamente don't raid are material por y no software (por todas maneras, must best long quien monto en su Día el servidor para asegurarte al 100%)

  Con por material a raid, should funcionarte the virtualizacion con el Vmware Converter.

  Respecto has you, otra duda the virtualizacion don't you replicaria el raid in el destino esxi. El haya raid in el destino esxi are independiente.

  El tema del raid in el destino esxi, depende como esten configurados los discos in ese esxi local. O los discos Quarto / lun Proyectos por una cabina discos visible por el esxi

  Al final, esos nightclubs a los than tiene acceso el esxi is formatean con el sistema ficheros VMFS of Vmware (pasan a ser como lo denominator vmware, data warehouses), donde is ubicaran las maquinas office.

  Espero ayuda sido acercado

  Kind regards

  Pablo

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.