Mountpoints for Oracle - Raid 10

Similar Questions

• RAID 0 for a RAID configuration not "this computer's hardware may not supported booting from this drive.

  I want to install a new HARD drive in a tower of the mine to a friend. It was initially created as a RAID 0 configuration with two 160 GB HDD. The replacement is a single 1 TB of HARD drive. I get the message "this computer's hardware may not supported booting to this disk.» Am I missing an approach from a RAID 0 for a RAID configuration, no?

  Hi RegularPencils,

  I suggest that you check in the basic input/output system (BIOS), if you find an option to disable the RAID. If you find, disable the RAID and try to install Windows vista, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Error message when you try to install Windows Vista on a computer that contains multiple RAW hard disks: "Windows cannot find a system volume that meets its criteria for installation.

  http://support.Microsoft.com/kb/933925

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't spend S370 because RAID Firrmware update is necessary, but this is not for my RAID card

  Hi guys.

  When I have never upgraded my Ironport Web Security Appliance for AsyncOS 7.7.0 S370 build 761 upgrade, for example, he said thar RAID Firmware update is needed for this, but if I try to update the firmware, the system told me that this is not for my RAID card

  What can I do?

  It is the result of the cli for upgrades:

  "

  SFPPRXY1P.intranet.Cajastur.es > upgrade

  .....

  Updates available.
  1 AsyncOS 7.7.0 build 753 upgrade for the Web, 2014-07-07
  2 AsyncOS 7.7.0 build 757 upgrade for the Web, 2014-07-28
  3 AsyncOS 7.7.0 build 761 upgrade for the Web, 2014-10-01
  4 AsyncOS 8.0.6 upgrade version 119 for the Web, 2014-10-27, is a version available for general deployment
  5. update the RAID controller firmware (for S360/S370/S660/S670 only required restart)
  [5]> 5

  Perform an upgrade may require a reboot of the system after the upgrade. You can connect again after that. Do
  you want to upgrade? [Y]> Y

  Not applicable to your RAID card upgrade
  Facility upgrade is complete.

  SFPPRXY1P.intranet.Cajastur.es > upgrade

  .......

  Updates available.
  1 AsyncOS 7.7.0 build 753 upgrade for the Web, 2014-07-07
  2 AsyncOS 7.7.0 build 757 upgrade for the Web, 2014-07-28
  3 AsyncOS 7.7.0 build 761 upgrade for the Web, 2014-10-01
  4 AsyncOS 8.0.6 upgrade version 119 for the Web, 2014-10-27, is a version available for general deployment
  5. update the RAID controller firmware (for S360/S370/S660/S670 only required restart)
  [5]> 4

  Perform an upgrade may require a reboot of the system after the upgrade. You can connect again after that. Do
  you want to upgrade? [Y]> Y

  Stale lockfile deletion

  Note: A new firmware is required for your RAID controller before you can upgrade to the version selected AsyncOS. This update should be canceled. First please update the firmware by running a new update and selecting "update the RAID controller firmware (for S360/S370/S660/S670 only required restart).

  Please see the release notes on http://www.cisco.com/en/US/products/ps10164/prod_release_notes_list.html for more details on the update of the firmware.

  The upgrade of the system has failed. This could be the result of a network interruption or a bigger mistake.  If the problem persists,
  Please contact customer support.
  SFPPRXY1P.intranet.Cajastur.es >

  "

  Thank you

  Regarding issue 1: it could be this new firmware is already installed.

  Look at page 3 of the release notes (http://www.cisco.com/c/dam/en/us/td/docs/security/content_security/RAID _...)

  After running the update of the firmware, the firmware upgrade package appears in the list of available upgrades even after a successful installation. The presence of this package does not indicate a failure of the upgrade.
   
  8
  To verify that the upgrade is running correctly, you can run the upgrade script again after the machine has restarted. If the upgrade was successful, the upgrade script indicates that the device does not require the upgrade
   
  Regarding your second question: the software upgrade:
  -you have an internet connection for update servers (the upstream proxy settings check maybe..)
  -What is your version of the software running (did you check upgrade)? Maybe you should first upgrade to 753 or some other version...
  -Maybe the reboot will solve the problem?
   

• Where can I get a driver for the raid on my motherboard controller intel?, promise PDC20319 S150 TX4

  Where can I get a driver for the raid on my motherboard controller intel?   I need for Windows 7.

  Hello

  I suggest you for the link and check the drivers available for the device is only for the Windows XP operating system.

  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22promise+PDC20319+S150+TX4%22

  I suggest you contact the manufacturer for additional assistance:

  http://www.Intel.com/p/en_US/support?IID=HDR+support

• Electrodes for Oracle spatial 11.2.0.4.0

  What patches are needed for Oracle spatial 11.2.0.4.0?

  I don't know what kind of response you expect an open question...

  Simply apply the last power supply and go from there.

  Bryan

• Is it possible to install oracle fail-safe-kind-of (active-passive) SAN replication for oracle?

  Dear Experts,

  Is it possible to configure replication of SAN (active-passive) integrated security for oracle for oracle?

  To get the RTO < 60 seconds

  • If the primary host fails, the remote site should have the option to start the oracle database.
  • Sites are geographically remote.

  SAN storage replication, can it be used in my scenario?

  • I have no option to implement oracle Data Guard as its very expensive.

  Is that what someone achieved something similar with SAN storage replication?

  • I have oracle SE.
  • It is obvious that the all-flash backup can be quick.

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  • Daily incremental backup with RMAN. And archive backup runs for every 1 minutes
  • To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint
  • What could be the solution with san replication? RTO is 60 seconds

  Thanks and greetings

  SAN storage replication, can it be used in my scenario?

  I have no option to implement oracle Data Guard as its very expensive.

  --> If you want to use the data that it is free of CHARGE, additional license is not required for normal data guard

  --> additional license is only for the ADG

  Is that what someone achieved something similar with SAN storage replication?

  I have oracle SE.

  It is obvious that the all-flash backup can be quick.

  --> Here, I understand that if oraclle EA is going to be expensive

  --> Again, you can use manual standby

  --> What you are looking for SAN replication, you will need to check with the storage vendor

  --> If your intention is to check with oracle storage, then this may be the correct discussion room

  What should be the strategy to have DR site get a few seconds, if the primary site failed for some reason any

  Daily incremental backup with RMAN. And archive backup runs for every 1 minutes

  To have the site of DR upward and running within 60 seconds, it still requires too much time to restore the database on remote site and have archive APPLIED setpoint

  What could be the solution with san replication? RTO is 60 seconds

  --> If your intention is to check with oracle storage, then this may be the correct discussion room

  Check in this

  https://community.Oracle.com/community/Server_%26_storage_systems/storage

• Code review for Oracle 11 g Administration Dataguard

  Can all give the code to review for exams for Oracle 11 g Dataguard Administration code.

  Thanks in advance.

  There is no review of Data Guard 11g.  The review of Data Guard Administration 12 c is 1Z0-066:

  Exam1Z0-066

• What Linux RHEL (Linux Red Hat Enterprise Server 6.7) compatible for oracle database 11.2.0.4 with grid Infrastructure?

  Compatible Linux RHEL (Linux Red Hat Enterprise Server 6.7) for oracle database 11.2.0.4 with grid Infrastructure.

  Hi all

  We plan to patch Linux Redhat Enterprise Server (6.4 and 6.5) to 6.7.

  I tried Searchin' on support of oracle for the compatibility of the database for Linux patches, but not able to find accurate information.

  can anyone share the ID document or information related to it.

  If OS RHEL 6 update 4 to 6-7 update patch

  (1) is it compatible

  (2) bugs or problems reported

  (3) in addition to the binary link again than the DBA to perform any other

  Thank you

  Hello

  6.7 RHEL is certified for the database 11.2.0.3 or newer. In other words, it is certified for RHEL 6.7 11.2.0.4

  Certification information for the Oracle database on Linux x 86-64 (Doc ID 1304727.1)

  -Jonathan Rolland

• We are in the streams we want to use the tools of replication of database of 3rd party for Oracle freeware. Pls suggest

  We are in the streams we want to use the tools of replication of database of 3rd party for Oracle freeware. Pls suggest

  Hello

  GoldenGate and shareplex are large databases for heteregenous platforms oracle replication tools.

  Shareplex replicates data between heteregenous platforms for example source on Linux and Windows.Shareplex target come from queues so that when we define it a few tables in the configuration of the source files, it will get automatically reproduced in the target database.

  SharePlex 8.6.2 technical documentation

  Concerning

  Rami

• Oracle Application Management Pack for Oracle E-Business Suite Guide 12.1.0.4.0?

  Hello fellow pioneers OEM.

  I am trying to locate the Oracle Application Management Pack for Oracle E-Business Suite Guide 12.1.0.4.0

  
  

  I have a beautiful SR but still no answer on that of the analyst. Thank you.

  DA

  Currently the latest version of MPA is 12.1.0.3.0

• Path of the environments for Oracle EBS (Profile)

  I have a question about setting up my profile for Oracle EBS. I just installed Oracle EBS on 2 nodes. Now I have to run the commands manually instead of being able to type them on the command line. An example:

  Instead of typing adstpall.sh, I have to do $ADMIN_SCRIPTS_HOME/adstpall.sh.

  Also with the automatic configuration service. I have to go on the dbTier in $ORACLE_HOME/appsutil/bin and run adconfig.sh and I have to go on the appsTier in $INST_TOP/admin/scripts and run adautocfg.sh but I want to be able to type adautocfg.sh anywhere and it will work

  There are also things as adpatch and adadmin, etc., I want to be able to run

  I don't know that there are several environment files in Oracle EBS. Anyone can guide me please to put up my profile so that I can use one of these commands from anywhere in the file system. I've never had to do before. I know they have to be in my .bash_profile, but I don't know what should go and what should not go. Please help me in this regard.

  Thank you

  -Change the .bash_profile

  -Add the following entry to the file:

  source /APPS Nom_du_contexte > .env

  Or,

  . /Apps Nom_du_contexte > .env - there's a point before the script

  -Save the file

  -Connect again as the operating system

  -Issue "env | ranking"to check

  Thank you

  Hussein

• ODI 12 - problem with LKM SQL for Oracle

  Hi again,

  Three days ago, that I asked about the problem with the data types of data warehouses in models that were missing. After you apply the ideas suggested by Rita (thank you very much ) I got from their work.

  But after that, we came across a new problem. When you run a mapping (Oracle for Oracle databases), it failed on the second stage - ' "work table create. "When we checked the generated code was something like this: '(" CREATE TABLE < work_table_name >). None of the names of columns or data types have been described in parentheses and as expected, the ODI execution error was "invalid identifier". It seems that API odiRef.getColList(params)%> does not work. I tried loading using LKM Oracle Oracle (DB LINK) but once again the columns are missing in the generated script.

  I have to mention the master and work repositories are different databases from Oracle and ODI Agent is not installed because of some problems.

  We are still beginners of ODI and would appreciate any help from more experienced guy (or other beginners).

  Thank you in advance.

  Just by chance, we found the soluton today!

  The reason of missing generated code was that the description of the types of data was not entirely cofigured.

  We found that the fields "create table syntax" and "'syntax of data accessible in writing' in each type of data in the topology definition were empty." After filling them, the generation of the script is running properly.

  Before that we had problems with missing data types in models and we realized the reverse engineering of the types of data, but obviously it is insufficient.

  Thanks to all those who participated in the discussion and tried to help us!

• How can we export itno csv data file for oracle forms

  Hello

  How can we export itno csv data file for oracle forms

  For example. I have the block called A.what never the data displayed on a block, when I click on a button, displays the block data, must be exported to the csv file.

  My application is running on the unix operating system.

  Please help on this.

  First of all.  What is your version of forms (for example: 11.1.2.2.0 not 11g).  Finally, who will use the .csv file?  If it is a user on their client computer - CLIENT_TEXT_IO TEXT_IO or WebUtil are standard packages used to export data to a file of Oracle Forms.

  The amount of data to be exported?  If you export only a couple hundred lines - export of Froms will be OK.  If you export more lines than that (300 + lines) then the export will be extremely slow to your username.  Keep in mind that forms is not designed to perform data exports - there are better tools available for this...

  Craig...

• Not a dba and need help for Oracle 11 G

  I have install an output db in space and I can't get the client that I work to install the spacewalk to connect to the db.

  output in the configuration of the client space (research forward and reverse and can ping by short/longname and IP.)

  # output extravehicular-installation - disconnected - external-db

  * Setting the Oracle environment.

  * Setting up database.

  * Database: set up the connection of database for Oracle backend.

  Name of the database service (SID)? spcwlk

  Name of database to host [localhost]? spacedb.domain.com

  Database (listener) port [1521]?

  The database connection error: ORA-12543: TNS:destination host unreachable (DBD ERROR: OCIServerAttach)

  DB server

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = spacedb.domain.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  lsnrctl start $

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 18-SEP-2014 11:17:37

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  From /u01/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: Please wait...

  TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  System settings file is /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  Log messages written to /u01/app/oracle/diag/tnslsnr/db-obrien/listener/alert/log.xml

  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  Listen on: (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=spacedb.domain.com) (PORT = 1521)))

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date 18 - SEP - 2014 11:17:39

  Uptime 0 days 0 h 0 min 0 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/spacedb/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=spacedb.domain.com) (PORT = 1521)))

  The listener supports no services

  The command completed successfully

  Hello

  Please add below lines to your listner.ora file and reload the listner.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = )

  (ORACLE_HOME = )

  (GLOBAL_DBNAME = )

  )

  )

  Thank you

  Jihane Narain Sylca

• Edition of database repository for Oracle Grid Control

  Can the repository database for Oracle Grid Control standard edition?  Company limited license and cannot use enterprise edition for Oracle Grid Control.  Please notify.  Thank you very much!!

  The requirement is due to the EM dependency on partitioning, which is an option of EE.

  EM 12: Enterprise Manager Cloud control 12 c requires a repository database Enterprise Edition (Doc ID 1438655.1)

  Overview of the prerequisites set EM

  To ensure that the existing, certified Oracle database has the Option of partitioning enabled (therefore, make sure that install you it in Oracle Database Enterprise Edition.) Installation and use of the option of partitioning in the Enterprise Manager repository don't add fees to customers when it is only used by Enterprise Manager.