RAID vs AHCI when installing window?

Similar Questions

• Error when installing Windows 10

  Hello

  When installing windows 10, it's show error 8007002.

  I deleted temporary files, but its still the same error showing.

  Help, please

  80240020 8007002C 80246007

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder. 2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow. Press enter 3. open Control Panel > Windows Update and Windows 10 should begin to download...

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• The time machine shaped my result of ssd unable to check my key when installing windows?

  Brief summary:

  My machine: Macbook pro mid 2012
  What I have: Samsung Evo SSD, optical Bay caddy, 8.1 windows bootable dvd with serial
  I wanted to do: install windows in my second internal SSD (optical Bay)
  What went wrong: Enter key I get: "we could not verify the product key. Please check your installation media. »

  I suspect that the problem is: I have formatted by mistake the SSD mac front.

  Question: Has been put in shape my SSD the cause of the problem? and if yes how can I do to reset?

  Detailed long version

  I have a macbook mid 2012 retina not pro that I wanted to have the option to be able to boot from a windows and a mac. As a result, I bought a samsung EVO solid state drive for this purpose. I decided to try the drive and put it in instead of the optical drive caddy the day I got it. I was invited with the message that the mac was unable to acknowledge it and follow a few steps online to format. I would find it later when we look at a forum that I should have left the unformatted SSD. However, I tried to install windows on the EVO by placing the optical drive in the computer, put the EVO in the main Bay. I put the windows cd in and followed the installation. Everything was good until I had to put in the windows key. I put in and received the message "we could not verify the product key. Please check your installation media. "I double checked to see if it was right by voluntarily entering a wrong key he gave me a message that the key was invalid. Snooping around, I tried to reset the drive by using the offer of advanced tools and I was told that windows did not have access to the partition or something of the sort.

  A format the drive of the source of the error and if so is it possible to return to the factory settings?

  All the advice/help is greatly appreciated! Thank you very much!

  The formatting SSD is not related to the issue with the product key. Windows Setup reformats the SSD in the main Bay NTFS still. If the SSD is less than 2 TB, you can format the MBR with attempts as well as FAT32 format.

  Your model is compatible with the installation from DVD and USB, both. You can also download the ISO of Microsoft W8.1 to the https://www.microsoft.com/en-us/software-download/windows8ISO to ensure that your DVD is not a several bits (32-bit and 64-bit DVD).

• QuickTime error when installing Windows 10

  Well, I'm currently on my Mac Pro (2014) right now and I use VMware Fusion to install Windows 10, but when I install QuickTime 7, he started to say this error:

  "ul_catalog.98cb24ad_52fb_db5f_ff1f_c8b3b9a1e18e not found in the quicktime.cab CAB file. This may indicate a network error, an error reading from the cd-rom, or a problem with this package. »

  I really need help with this, my Mac OS X computers, but why Windows has this error has ever done? My iPhone 6s / 6 s more, my iPad 9.7 Pro and 12.9, My Galaxy S7 Edge and my Apple Watch doesn't have this problem. Why Windows? My iMac 4K / 5K ever had, is not even on my Macbook Pro. I NEED URGENT CARE!

  Apple has removed Quicktime for Windows.

• Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

  This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

  Here's some output terminal which can help you to (I) hope.

  Blakes-MBP:~ blakeleeper$ diskutil list
  /dev/disk0 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *500.1 GB   disk0
     1:                        EFI EFI                     209.7 MB   disk0s1
     2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
     3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1 (internal, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:      GUID_partition_scheme                        *320.1 GB   disk1
     1:                        EFI EFI                     209.7 MB   disk1s1
     2:       Microsoft Basic Data                         319.9 GB   disk1s2
  /dev/disk2 (internal, virtual):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                   Logical Volume on disk0s2
                                   27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                   Unlocked Encrypted
  /dev/disk3 (external, physical):
     #:                       TYPE NAME                    SIZE       IDENTIFIER
     0:     FDisk_partition_scheme                        *16.0 GB    disk3
     1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
  Blakes-MBP:~ blakeleeper$
  

  You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

• Satellite A100-002 - freezes when installing Windows 7

  Hello

  I have 1. Satellite A100-002 and 2. big problem with the installation of Windows 7.

  2 years ago I tried to install Wista - but it froze during installation, whenever I tried. of course, I tried different versions of Wista.
  Once I managed with installation - but he keep gel al the time - immediately after departure.
  so I gave up - and I'm back to XP

  now I'm trying to install Windows 7 and again the same problems :(

  can someone tell me whats wrong? -a really need him.

  Thank you very much

  Hello

  When the laptop just hangs?

  In addition you using SATA drivers or install it in compatibility mode?

• HP 15 - r014TX: GFT Drive Partition problem when installing Windows 7 on my HP 15 - r014TX

  Hello
  I have a new HP laptop that had windows OS 8.1. OS has been corrupted and now when I try to install Windows 7 on the same I get this error: "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »
  So, I saw a few videos of the solution on youtube and found that I need to convert MBR mode and for that I need to clean the drive and re partition which will result in the loss of data. As I don't have a BONE in my laptop that I can't even get back to the top of my data.
  Some can give me alternatives by which I can back up my data or install windows without losing my data.
  I tried the option "Repair Windows" so while installing windows7, but even that does not work as the OS recovery file is missing.
  Any help would be much appreciated.

  Hello

  Just to make sure, when starting in legacy mode, you'll normally see two optical drive options:

  CDROM

  and

  CDROM (uefi)

  You see two options, and if so, you select the CDROM (uefi)?

  Otherwise, an option would be to remove the drive HARD, place it in an external enclosure - is an example of the link below - connect to another PC and see if you can access your files.

  External 2.5 HARD drive caddy ".

  Kind regards

  DP - K

• Qosmio G30-176: BSOD when installing Windows Vista Edition full

  I have my wisdom(??!!) I bought a Toshiba Qosmio g30-176 with preinstalled Windows XP MCE 2005. The plan was to install Windows Vista Ultimate on drive D: (do the dual machine boot XP & Vista). I've updated the BIOS today on the Toshiba site and I ran Windows Vista Upgrade Advisor.

  I started the upgrade of Vista (custom) and installed the Toshiba RAID drive C: Qosmio (driver C:\toolscd\raid) driver. Installation starts copying the files from the Vista installation disc. This completes OK.

  The upgrade then continues to "unpack"(?) ". files - part way through this restarting of the o/s.
  To restart the Qosmio stop with the blue screen of death and the "SESSION3_INITIALIZATION_FAILED" message "STOP: 0x0000006f (0xC000009D, 0x00000000, 0x00000000, 0x00000000).

  What is the error?
  What should I do to fix it?
  Thanks - Alan E

  Hello

  You perform an upgrade or a new installation of OS?
  If you have tired to upgrade XP to Vista you must first remove some utilities Toshiba XP because some XP tools are not compatible with the new Vista operating system

• ProBook 5310 m: fake Windows key when installing Windows 10

  Hello

  I hope someone can help me. I am trying to install Windows 10 on my system that is currently running Windows 7 SP1 and it's not accept my Windows key. I contacted Microsoft who told me that I need to have my unlocked OEM product ID so I can install Windows 10. How would this please?

  When on the screen that requires a product key select 'Skip '.

  Please see the article in the link below, Option #1.

  How to activate Windows 10

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• Partitioning of the problems when installing Windows 7

  I have a HP Compaq CQ58 supplied with Windows 8. I switched to Ubuntu and I'm doing a clean install of Windows 7. Installation came at a prompt asking "Where do you want to install Windows?" and I have three partitions:

  Disk 0 Partition 1 - 94.0 MB system
  Disk 0 Partition 2-296, 4 GB primary
  Disk 0 Partition 3-1, 6 GB primary

  When you select one of them, I get "Windows cannot be installed to Partiion Dis 0 x." On the 1 (System) partition, the details are:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. The partition is a partition of EFI (ESP) system.

  On Partition 2 (primary), the details just say:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  And on the Partition (primary) 3, tell the details:

  Windows cannot be installed to this disk. The selected disk is the GPT partition style.

  Windows cannot be installed to this hard disk space. Windows must be installed on a partition formatted in NTFS.

  Windows cannot be installed to this hard disk space. The partition is of an unknown type.

  Well, I had nothing in particular requiring a backup (it is a computer of leisure, all of our important data are on other devices), then I hit the "Format" button on all three in turn try to get the installation to run on one of them. If any OS at this point is completely erased. I need to know, now, what to do. I'm not comfortable with my computer knowledge to go and delete partitions without professional opinion. I'm not used to have more than one partition and wouldn't mind consolidating unless HP has good reasons to keep them separate.

  Hello

  There is no reason to keep these partitions and you can remove them using the disk management on the following installation disc.

  Left click a partition for highlight.

  Click the blue link "drive Options (Advanced).

  Select the option 'delete '.

  Repeat this step for each partition listed.

  Once completed, you should see only 1 entry showing that "the unallocated space on disk 0.

  Click on the button 'Next' operation of installation of Windows 7.

  Be aware that Windows 7 will also create a "System" of about 100 MB hidden partition that contains the files and start the recovery environment.

  Kind regards

  DP - K

• no partition found when installing windows

  I have notebook for hp 60 HAV. I HAV tried to cool to format my pc with a windows 8 dvd. but when the "select partition" come where to install windows there is no disks. below, install its display or search for drivers. How can I solve this problem? Please say.

  I HAV solved this problem by this page here.

  but for all I'm describing again.

  (1) download and determine the virtion chipset by CPU - Z. the "mainboard" download tab

  (2) download an iso image of windows xp sp2 (sp and sp1 is not recommended)

  (3) download the compatible SATA drive driver for your chipset software. read the page to find the right one. here

  (4) then download nlite. here

  (5) to read the pdf and do as he says. You can find it under your virtion correct chipset. in the poin not '3').

  (6) after making a bootable xp. You can install it and. You can install any windows virtion you like.

  Enjoy

• Dell Inspiron M5030 black screen when installing Windows 8.1 on 'Get Ready devices.

  Dell Inspiron M5030

  I had Windows 7 installed and works perfectly, but I wanted to install Windows 8.1, I tried a new install first (also tried to upgrade to windows 7). Everything installs fine but when it restarts for the first time the windows logo appears and 'Getting devices % ready' then the screen goes black.

  Ive tried:
  -For let sits for awhile to see if it comes back, and I get nothing after hours
  -J' plugged a monitor without response (also tried to close the cover put to sleep and go to bed)
  -J' quit and tried to start in Safe Mode, but it says that Windows cannot boot mode safe because windows setup has not finished

  I can start on my windows repair and go to the recovery prompt but don't know what to do. It looks like a video driver issue, the laptop has an AMD Radeon HD 4200. If thers any why to install the driver before implementation ready devices? Help, please!

  I had the same problem and did this and it worked without problems... The idea is to integrate the drivers updated in the ISO/DVD. The drivers supplied with the W8.1 DVD do not work as well as I was getting the BSOD with the installation.

  1. download Winreducer and install all the 3rd party software that it requires.  Look in the howto.pdf

  2. download the latest AMD Catalyst drivers from AMD website (not beta).  Drivers Windows 8, I think that the list.

  3. extract the files to temp dir.

  4 copy files and drivers since the temp (packages\drivers\display\w86a_inf) directory and the sub (B149756) to the dir dir drivers winreducer (work\integrate\drivers\x64).  In the x 64 dir, you should have cats, msi, INF and the b149756 files.

  5. run winreducer.  Make sure you have practice an iso to DVD Windows 8.1.

  6. Once you mount your iso, you will spend for options and features screen.  You can see the presets, appearance, features... on top.   Let alone all the options EXCEPT the location of the drivers under System.  Change this to x\WORK\INTEGRATE\DRIVERS\x64.  Don't forget to change the x to your location.

  7. click on finish.  Save as an iso. Apply.  It will save the iso changed in the winreducer folder.

  8 burn and install.

  9. After you are done installing, install the driver package that you downloaded in step 2 by running setup.exe in the main dir.

  10 thank me LOL

  It worked for me on an Inspiron M5030.  I hope that my answer is detailed enough.

• Gets the error message that says non-genuine Windows, also lost the internet connection when installing Windows 10

  Original title: windows 7 Home premium product...

  I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!

  Use your Windows 7 Home Premium product key to activate it.

  Windows 7 is pre-installed on my computer, How can I find the product key?

  The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:

  

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:

  Activate your Windows 10 license with Microsoft Chat support

• Error: 0 x 80280006 when installing Windows Movie Maker 2.6

  I still get and error message error: 0 x 80280006 when you try to install Windows Movie Maker 2.6. The information indicates that

  the codec has not been installed because the box options has not been verified before downloading program.  I have not yet found none

  options box.  I used Windows Movie Maker on Windows XP on a computer with a 32-bit system earlier, but have not been able to

  install on Windows 7 on this 64 bit laptop.

  Windows Movie maker 2.6, is NOT a "new and improved" program

  On the contrary, the 2.6 version is just a "watered-down" version It is used for some Vista computers that are unable to support its native version of 6.0 integrated which, in my opinion, is the best version of Windows Movie Maker.

  2.6 is compatible with Windows 7, but why waste your time when Win 7 can have Windows Live Movie Maker that is intended for Windows 7?

  Please don't waste your time at the 2.6version facility.

  Install Windows Live Essentials 2011 which includes Windows Live Movie Maker.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-essentials

  Note: it is a Windows Live Essentials 2012 available, but I don't know if it's a "Beta" or a final version. I installed it and it seems fine.  WLE 2012 also includes Skydrive in the package.

• Re: Satellite L300-1AP BSOD when installing Windows XP

  I have a new L300-1AP and would like to intall XP Pro but when I try it I get the stop message 0x0000007b.

  Made a new installation disc integrated with all updated sata drivers, I still get the message. I'm not sure about how I would install drivers of third party on the F6 function because it has not a diskette and cany to find how to do the same thing in a CD anywere.

  I appreciate that we should all try to use the vista OS that came with it, but it is a problem of compatibility with older software that I use.

  Can anyone help please?

  In the Microsoft Knowledge Base is an article about it:
  http://support.Microsoft.com/?scid=kb%3ben-us%3B324103&x=17&y=8

  I think that there is something wrong with the SATA drivers. My Satellite L300 works with XP without problems or BSOD when installing.

  The SATA drivers are in this package, and the Intel Storage Manager you can download on the Toshiba site.
  You can create your own installation with nLite (http://www.nliteos.com/) disc.
  If I have integrated the SATA drivers, you do not have to press F6. The HARD drive will be automatically recognized.