Similar Questions

• Y at - it a keyboard shortcut to raise the audio level upwards or downwards by a 1db?

  In Final Cut Pro, you can select a single item, or a track or group of clips, and press on the + or - button to increase or decrease the volume of the clip, 1 dB at each tap, so you can quickly make this slight change in the volume of perhaps a music or voice to follow and quickly see how it changes the relationship between the music and the voice , or something similar.

  I know that you can manually change the audio levels of clips in Premiere Pro by pulling on the audio lines..., I know you can navigate VIDEO - AUDIO OPTIONS and punch in a db of change as well, but none of these options are are fast as CONTROL + or - to continue to see how 1db upward or downward change affects balance.

  Is there a keyboard equivalent in Premiere Pro?  Thanks in advance for your help.

  In CC, there are a few new shortcuts for "Clip Volume"... Finally!

  They go by increments of 1 dB or 6db. I would prefer 3db, but better than nothing.

  UPDATE: in fact, in preferences > Audio, you can adjust "Volume off." Yay!

• To increase the audio level?

  Hi, I would like to know how can I increase the audio level of the level of 12db maximum in final cut pro x? Can I duplicate the audio track? If so, how can I do that?

  Thank you.

  UUse function audio loudness have been made. Wisely.

• Change the audio level of many clips in the browser?

  I have 1000 or more clips in these images of GoPro project, cameras, and selects music, with many clips that have audio very strong especially the GoPro mounted on the vehicles off the road as they motor at high speed through obstacles. My edit in place includes 20/20 speakers, and even though I have a moderate level of audio that is configured for editing when I select images in the browser that has strong audio I need to stop and lower this clip in the browser at once and he eats a precious time.

  Is it possible to change the audio level in many clips selected in the browser?

  Select the clips.

  Go to the Clip > Audio Options > Audio Gain

  When the Gain Audio pane opens, set Adjust Gain of: -12

  

  Click OK. You can experiment on a clip or two to see if this gain reduction is too much or not enough for you.

  MtD

• How can I adjust the audio level to 85 dB in first export?

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  AnjuBacker wrote:

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  85 dB is a level of calibration of the monitor. Use a meter of SPL (C-weighted/slow) with pink noise to perform this task. It is not something that is defined during mixing or exit. Loudness Radar is a sound level meter software. It includes templates and Visual representations to program Loudness, short temporary term Loudness, Loudness and Loudness Range (LRA). There is also an indicator of True Peak exceeded. Add this at the end of you point out the string for a precise measurement of your mix. Note to determine an exact indication of the program Loudness, the audio segment must be measured in its entirety.

  -paul.

  @produceNewMedia

• Cant' find the audio level yellow

  Hello world

  I'm having a problem when I update my videos, everything works, but one thing is missing, the audio level of yellow.

  Anyone know how to find? I really need

  Thank you very much

  Cam

  

• I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1. Still no sound.

  I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1, but still no sound in clips. Not even on the old files that are used to work.
  

  Bfun

  What operating system is running your first items 12/12.1? Can we assume that this audio reads OK

  on the same computer when you use a computer independent of Premiere Elements drive?

  What are the properties of these clips that have worked before, but don't know regarding sound

  For now, I will assume that you are working on Windows 7, 8 or 8.1 64bits.

  Have you checked the settings change preferences/Menu/Audio ASIO hardware? You have all 3rd party audio devices integrated in your IT environment?

  Please delete the Adobe Premiere elements Prefs file and, if it does not, then all 12.0 folder in which the Adobe Premiere elements Prefs file exists. Is the path to 64-bit Windows 7, 8 or 8.1

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  12.0

  and in the 12.0 folder, is the file Adobe Premiere elements Prefs that you delete. If this does not work, then delete all 12.0 the folder in which the Adobe Premiere elements Prefs file exists. Make sure that you work with the Option "Show hidden files, folders and drives" of the current folder so that you can see the full quoted path.

  You have the installation files or the installation disc with the serial number purchased in case we need to use to uninstall/reinstall?

  We will follow your track to the top.

  RTA

• Error in the painting: "there is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Original title: new resource error in painting, whenever I try to close the file or select all content

  (Using XP with SP3) Use this machine for months and months and I use paint all the time to capture screens and paste a part in the documents. Don't know what I did but all of a sudden this error when I try to select - all or to close the window in paint:

  "There is not enough memory or resources to complete the operation. Close some programs, and then try again. »

  Even clicking end task in the Manager of tasks gets this message before TM requires the application to stop. Back to zero does not solve the problem, and other programs (memory hog) encounter any problems at all. Virus protection is up-to-date, ran a few cleanups, no help. I think that somewhere, paint is watered - I can download and reinstall?

  Hi ebjeebee,
   
  This problem can occur for the following reasons:

  • If the bitmap file is a compressed format that Paint cannot read. For example, paint does not support CVID compressed bitmap files. If you try to open such a file in Paint, the above error message occurs.
  • If the default image for the paint attributes are too large. This setting depends on the memory and disk space.
  To resolve this issue, use the appropriate method:
  • If you receive the error message above when opening a bitmap in Microsoft Paint, the only resolution at this time is to open the bitmap file in another program.
  • If you receive the error message above when opening Microsoft Paint, follow these steps to fix it:

  a. open an existing bitmap.

  b. in the Image menu, click attributes.

  c. click on default and then click OK.

  d. on the file menu, click Save as and save the bitmap with a new name.

  e. close and restart Paint.

• Melted how audio and keep the audio level in clips later

  I have piloted PE 10.  When I add keyframes manually to fade audio output, or simply select the option ' fade out ' to fade at the end of an audio clip, the audio ends at the end of the clip and the audio of the following clips is to initial level.  This creates a large discontinuity to the noise level.

  What happens if I want to the next clip or clips to continue in the same faded audio level, rather than start at their original level.

  In Pinnacle Studio, for example, when you fade down audio, all audio to the right will be adjusted to match the level after the fade, as long as there are no keyframes forward of this final key-frame fade.  Now that I'm getting 10 EP, I'm bored of this behavior.

  In PE10, there is a sequence of keys which allow this behavior?

  If you have only one or a few Clips, where you want to reduce the Volume, I do so at the level of the Clip and simply adjust the fixed effect (appears automatically on all the audio Clips), and add keyframes to adjust the Volume.

  I find it easier since the effect controls panel, accessible by selecting the Clip you want to adjust, and then in the effects tab, choose Edit effects.

  Lets say you have a Clip, where the majority of the Volume is just, but there is a section where you want to turn it down. Go to where you want the Volume to start to get lower, add a keyframe (toggle ON keyframes), then go to where you want the Volume restore the main value and add another keyframe. At this point, nothing has changed, but you added two key frames, which "held" the Volume at the current level. Now, go where you want the Volume to its lowest, to the right of the first keyframe that we added. Add another. Adjust the level to this keyframe (now the second in the Clip) to what you want. Go where you want the Volume first on the rise, just before the second keyframe that you added (now third), and add another keyframe. Adjust so that it matches the Volume you settled in what is now the second keyframe. You will have four key frames: the first, one that keeps the Volume at the beginning of the Clip, the second, which allows to adjust the Volume to its setting, the third, which corresponds to the Volume of the second, then the fourth, keeping the Volume at the level of the initial until the end of the Clip. It will look like this:

  

  Some like to do the with the "rubberbands" Keyframing in the Clip itself, but I like the effect controls panel.

  In addition, keyframes that we added, are linear and if you want to adjust the Interpolation, the smoother changes just Rt-click on each keyframe, to adjust the Interpolation. Interpolation is a little abstract, so I suggest to read the help files on Bezier curves on keyframes.

  Good luck

  Hunt

• Adjust the audio level through an entire project

  Captivate v5.5

  I created a project with a narration for slide added during 2-3 days.

  Now, I want to ensure that the level of my narration slide by slide is consistent throughout the project.

  If I select 'Normalise' the project/adjust the Audio Volume / change what (if any) should I do with the Volume on the left slider?

  Would you recommend this as the best option?

  Is there a better option?

  Thank you

  Noel

  Noel,.

  "Normalize" audio is usually done to equalize the difference in volume between audio on different slides in your project.  So if you have noticed that some slides were significantly stronger or softer than others, you can use standards to get them all sounding more or less the same.

  I don't know if you have the following ELS or just Captivate, but his blog post has a brief overview of how to perform changes on the audio through several Captivate slides using Adobe Audition.  You can use other audio editors in a similar way to a certain extent, but back and forth between Captivate and audio editors who belong to the ELS is generally higher.

• Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

  Hello world.

  It will be long and windy.

  I have a problem with my ASUS G50VT - X 5.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
  • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
  • Used norton. then corrected all the errors found and the questions. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the problem.

  im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  I also looked in the event viewer and noticed these problems...
  The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
  -

  -

  6006

  0

  3

  0

  0

  0 x 80000000000000

  56201

  Application

  Collin-PC

  -

  TermSrv

  916

  Opening of session

  02000000

  and it was lower than...
  Bucket of error, type 0

  Name of the event: ServiceHang

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: LanmanServer

  P2: srvsvc.dll

  P3: 6.1.7601.17514

  P4: 20

  P5: 2

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERBC1E.tmp.HDMP

  C:\Windows\Temp\WERCBA9.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500

  Display state: 6

  and below that,.,.

  The winlogon notification subscriber takes a long time to handle the notification event (Logon).

  Hello

  1. Since when are you facing this problem?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Step 1:

  If the problem persists, you can create a new user account and check what is happening. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.

• Impossible to activate the audio service with error message: "cannot start the Audio window Service.Some features will be unavailable.

  Original title: how to get audio in my system that failed for an unknown reason

  Hello... In my audio system does not... If I try to open the "manage audio devices" option in the Control Panel it opens a dialog box with the content next-' this computer cannot play audio because the Windows Audio Service is not enabled. " You want to enable the Windows Audio Service? " for which I clicked 'Yes' ." Then it displays a dialog box that contains the text next-"Could not start the window Audio Service.Some features will be unavailable".
  What is the problem and what should I do now?
  -Thanks in advance

  Hi Thennisha,

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?
  2. What is the brand and model of the computer?

  Please follow the steps in the link below and check off the question:

  No sound in Windows:
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Sound engineer freezes when I try to adjust the audio levels

  I have Windows 7, and occasionally (1 of 5) when I start my computer, the volume mixer will freeze everytime I try to adjust the volume until I restart the computer. When I try ending the process via Task Manager > administrative tools > Services > Windows Audio, I get the error "the program has not responded in time."

  I have no sound card, my active audio device is my Logitech G930 USB headset. When I try to turn on/off the headset, nothing happens. The only way to solve the problem is to restart my PC.

  Is there a solution for this?

  Hello

  Did you change to the computer?

  Method 1:

  I suggest you to see link and check.

  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I also suggest that you run the Microsoft fixit tool and check.

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  See also:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Can adjust the audio levels with a single clip

  Very simple question that drives me crazy.  Just before I post, I'm a complete to this noob please go easy on me.

  I'm editing a podcast.  It is a clip, a track in first pro.  My sound levels varies between-3 and - 12db through recording due to parts where I speak louder and quieter.   I need to balance a little better, to make the quiet parts louder.

  I don't know how to do this outside the insertion of keyframes volume level in the clip, which is slow and manual and takes forever.

  Every search I do to normalize levels is all about several clips and by adjusting the maximum peak in the same, that will not help me.

  Thanks in advance!

  Adobe Audition is a speech Volume Leveler you might want to check.

• Adjust the Audio level of the track and a selection of Clips

  Hello

  I have trouble finding ways to address overall levels of a group of clips, or an entire track in the first. Pointers or links would be appreciated.

  Thank you!

  Select all, then use [or] shortcuts.