RAM INSTALLED BUT NOT START THE COMPUTER

Similar Questions

• A VCR tape was copied on a DVD. Play on TV, but not on the computer. Can it be fixed?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  A VCR tape was copied on a DVD.   Plays on TV but not on the computer.   This problem can be corrected?

  ==============================================
  Can successfully play you commercial DVDs on this computer?

  IF you go to... Start / computer... and left click of the drive letter
  the DVD player is he will play?

  Media Player freeware at the following address may be worth a try... it will be
  play anything:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (32-bit Version)
  http://www.filehippo.com/download_vlc_32/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player (64-bit Version)
  http://www.filehippo.com/download_vlc_64/
  (works on XP, Vista, 7, 8)
  (the name of the file to download is: vlc - 2.0.5 - win64.exe)

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Could not start the computer using the normal error 0x800106ba and 0x80070426

  Original title: Code 10 and error code Window Vista

  Hello

  I'm loading up on safe mode with network.  When I tried to laod normal I get a blank screen and after I sign-in is on Safe Mode.

  I got error 0x800106ba and 0x80070426 messages and I just opened the Device Manager and found this security processor laoader driver code 10.

  Since then, I have installed a constant guard with Comcast meet all what I had problem with my system.  I called tech support and they won't help because they say that I have problems with my Dell Inspiron 530 problems I describe with the PC and not releated to each software.   If anyone can help.  In August 6, 2012, I ran diagnostic memory without any problem what so ever. I have no idea what else to do for these problems, suggestions please let me know.  Thank you

  Elizabeth

  Hi Elizabeth,.

  Follow these methods.

  Method 1: Disconnect all external devices except the keyboard and mouse and try to start the computer in normal mode.

  Method 2: Start your computer in last known good configuration.

  Method 3: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 4: Follow the steps in the article.

  What to do if Windows does not start correctly

• Adobe Creative Suite 5.5 Design Standard for PC, installed but not started that the folder is empty, why? How should I do?  Is there an Adobe customer service or are we just orphaned Adobe with an expensive product to know our

  Adobe Creative Suite 5.5 Design Standard for PC.  Installed but the program does not launch because the folder is empty.  An ideas?

  Thanks for the reply.  I am a little resourceful orphan and I now work on my own.  If I still have problems I'll be back.  Once again thanks for the reply.

• Power switch T30 does not start the computer

  New motherboard installed by Lenovo's Mexico on a guarantee out of T30. Machine will not start. Any ideas where to start (outside the machine back for another long stay of the shipment) would be appreciated. Not my machine. Benefit for a friend.

  ajkula66 wrote:

  You can turn on with one of your A3x keyboards... less than what I remember.

  Good luck.

  Thank you. I stuck an A31 keyboard on it and it turned on! A took a look on the original keyboard. Jumped the bezel around the button cell and found the power button was missing the rubber dome which lies beneath the button. A keyboard A31 cannibalized and it is stuck in the keyboard T30. Major PITA but a few minutes of fumbling had done. Computer works fine.

  I looked inside the frame, but did not find the old piece of rubber. Chalked it up to the mysterious things that happen in transit. The owner swears that the power button was functioning before the swap to the mobo. In any case, thanks for the tip on the keyboard.

• Example: HPcompaq mintower7900: can not start the computer

  Hi all

  I need help from anyone who helps, when I try to start my computer by pressing the power button, the first time it starts and all the fun of but only run it for the fun of a few seconds then stops. When I remove the battery, CMOS and RAM for about 5 minutes and then put back them. When I start it starts well. When I try to restart, it restarts fine, but when I turn it on turn off it starts and all the fun of but only run it for a few seconds the amusements stops and nothing is visible on the screen.

  I tried to replace the RAM and CMOS, but it always behaves in the same way. My computer is HP Compaq 7900 Mini-Tower Core 2 duo. I'll be happy if my problem is solved.

  Finally, I found the solution. The problem was the switch, when I changed the switch, the computer was fine to start normally.

• Memory micro SD card works on phone, but not on the computer, Please HELP!

  Help, please

  History
  (1) I got a 8 GB Micro SD memory card, it worked fine for two years and then became corrupted, I formatted and it worked fine for about two months before, she has become corrupt again
  (2) this time when it became corrupt my phone always accepted, but the computer could not detect, weird, I decided to not format and continue to use on my phone
  (3) I decided to buy a new memory card and an adapter and then transfer the stuff over the old to the new, but I was shocked when the NEW memory card and a NEW adapter did not work and continued to say needs formatting, hmmm...
  (4) I decided to format it, but it says that it cannot be formatted... WHAT!
  (5) I put the new card in my phone, it works and I have format it on my phone instead... IT STILL DOES not work! Help me!!!

  I still think you should get a new card reader.  The adapters are not likely to be the problem.  On the other hand, I had a player go bad and yet still be "recognized" by the computer.

  It is possible, but probably not - IMO that reinstall the driver (if available; in general, however, these devices use drivers that come built-in to Windows) or a firmware update (if available for your drive in particular) could solve the problem.  What is the brand and model of your card reader?

  At the very least, you should see if you can find someone with a SDHC card reader and then see if you can read and format the card using your cards.

• Disable the lock screen sleeps but not when the computer sleeps.

  Hello
  My goal (and thousands of other users of Windows 8) are to save the batteries without be pestered constantly to enter my password - but at the same time to preserve the security of the computer.
  My goal is the following:
  -Screen could sleep in X minutes (to save power) without the computer
  -Lock the computer when the computer goes to sleep in X + Y minutes.
  I intentionally left the details that are not important. Please do not post a response unless you have been able to do successfully is Windows 8 - i.e. only requires a password when the computer goes to sleep, but not the screen.  It was no problem in Windows 7.  Is - this another Windows 8 'development '?
  X and Y are two positive integers. 8-)
  I expect an answer of reg-edit...
  Thank you

  Hello

  1 have had any changes made on the computer before the show?

  2. have you set any screensaver on your computer?

  If you have set a screen saver, I suggest you to follow these steps and check if it works:

  a. right click on the desktop.

  b. click on Customize.

  c. click on screen saver.

  d. in the new window, uncheck the option on the resume, the logon screen.

  e. click apply and OK.

  Let us know the results.

• Why does sound come out of the helmet, but not from the computer?

  Yesterday I moved something in the audio, and now I can't hear the computer without having a wired headset. And now, when I listen to the videos on youtube, I control the volume of the video from the buttons on the computer instead.

  Hi Andriita,

  -What is the brand and model of the computer?

  -What changes do you have on the computer before the show?

  I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the Audio troubleshooter and check if it works.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  Make the computer speakers as default audio output device.

  (a) click Start and then click on Panel.

  (b) click on material and audio.

  (c) click on its icon.

  d) under playback devices tab, right-click on the empty space, and then select the show disabled devices and show disconnected devices.

  (e) right click on the computer speaker device and select set as default device .

  (f) after saving the configuration, close the window and check if the speakers work.

  For reference:

  Tips for solving common audio problems

  http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Hope this information is useful.

• My computer will not transfer videos from my camcorder. It lists the camcorder on the tab devices & Printers but not on the computer for automatic download tab

  I have the camcorder connected by an IEEE / Firewire cable.

  Hello

  1. that you get an error trying to transfer files?

  2. What is the brand and model of your camcorder?

  Follow these steps and check if that helps.

  1 - Power on the camcorder, and double-click the name of the software to open it on the computer.

  2 - Click on the 'file' tab on the software to open a folder containing all digital video recordings stored on the camcorder.

  3 - Click on the video file you want to transfer to the computer, then click on "Import", "Transfer", "Copy to PC" or similar expressions, depending on the camcorder model. A copy of the video file are saved on the hard disk of the PC.

  If you have a SD card, then proceed as follows.

  1. fix the card reader with a USB cable to a free USB port on your computer. Skip this step if your computer has an internal card reader.

  2. right click on 'My Computer' and choose 'Explore' in the menu. Find the drive letter that corresponds to your card reader and right-click on it. Choose 'Explorer' from the menu to display the list of the pictures on the card.

  3. highlight each of the photographs that you want to transfer. When you are done highlighting the files, right click and choose 'Copy' from the menu. Find the folder on your hard drive where you want to save photographs. Right click and choose "Paste" from the menu to transfer the files on the hard drive.

  Let us know if you need assistance with this problem of Windows. We will be happy to help you.

• Poer HP Mini not start the computer button

  Hello

  I have a strange isue with my HP Mini laptop (do not know exactly the 110 version or 210 probably). When I power on my laptop, nothing happens. no noise, no display, nothing. But I still see the AC plug light when I connect AC power. I tried to start with or without the battery, no difference. It seems that the power button no longer works... How could I fix it?

  Thank you

  Thomas

  Hi Thomas,

  Without having the Num or caps lock keys shift to go it could be anything. Could be a power problem, could be the CPU or RAM memory, or even the system board. I recommend that if you are in warranty (or out of warranty, but there might be a fee) that you contact HP Total Care at 1-800-474-6836 in North America or visit this link if you are outside of North America or take it to a local technician.

  Thank you

• Computer Vista will not start, the computer keeps restarting. Also had a BSOD "STOP: 0 x 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)" while trying to use reinstall OS Dell drive

  Original title: corrupted vista OS?

  My Dell studio slim desktop (Vista OS) that I have since Mar09 died on me 2 weeks back and I can't it start and it will keep rebooting until it resembles the wide long beep (as if a deceased person)

  Whenever my com has restarted, it shows the following:

  Safe mode

  Safe mode with networking

  Safe mode with command prompt

  Last known good configuration (Advanced)

  Start Windows normally

  All options will be led to the recovery of my com & return the same screen.

  It will always get stuck at the loading bar where the com starts boot & restarts itself.

  I tried to attach the hard drive to a different com as external hard drive, but it will begin to restart that com & hang the CMO as well

  I tried using the disc to reinstall OS from DELL and it will show a msg of error (blue screen) with the following text:

  Disable or uninstall the antivirus, Defrag disk or backup utilities. Check the configuration of the hard disk & check for any updated drivers.

  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  STOP: 0 X 00000024 (0X8D5389C, 0X8DB535CC, 0X001904AA, 0X8CC143A1)

  NTFS.sys address 8CC143A1 base at 8CC06000, Datestamp 47918a 96

  Any idea of this situation?

  Is it possible to save my cause com have not all backups from my hard drive?

  Any help would be grateful.

  Thank you

  Hi Bill,

  I forgot to include some info as well... I replaced the 'touched' hardisk (Barracuda 500 GB) to an unused a (Barracuda 160 GB) and the problems disappeared. Whenever I change back the 500 GB in the com, the sound signal occurs only backwards the system continues the reopening for abt... 10 + times?

  "My Office studio slim (Vista OS) Dell I have since Mar09 died on me 2 weeks back and I can't it start, and he'll keep rebooting until it seems a beep long-lasting looks not (as if someone died).

  So the questions are now fixed, unless you put the other disk hard?

  Test the other hard drive.

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  And run the F12 as I advised you to do so.

  It is DELL's Diagnostics software.

  Good luck with it.

• hp5520 wireless printer is connected to wifi, but not to the computer

  I changed my router and now my hp5520 is not found by my iMac, iPhone and other devices connected previously. I have reset the settings to factory default unplugged the router and turned off wifi Mac. I turned back on everything and put the wifi on the printer but nothing is not listed as being likely to be discovered.  ePrint works so its online and reports show its connected. How can I me he connect to the device again? It was working fine until the router has changed.

  We went to an eircom D1000 modem 2247NWG.

  Running OSX 10.8.3

  Lack of support for Hello could explain all this, but if the ISP, then said, well... maybe...

  If you have a Windows 7 machine that can print to the printer?  You have another router to try?