Ran memory hard drive, added a hard drive and hopeing I can combine somehow.
I have added a second hard drive with XP on it. I have the second disk set to CSEL. I have a gateway pc. It appears in Device Manager. I was hopeing to combine them, a bit like you can do with vista. I put in wrong place
If the primary transmission is set to Cable Select, you have set the jumperr on the extra disc correctly.
If the primary transmission is set to master, you must assign additional drive SLAVE jumpers
Assuming that both show in BIOS, Device Manager and Windows Explorer, you cannot combine the two discs.
What you can do is freshly format additional drive and then move all files data yourr on him... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
Tags: Windows
Similar Questions
-
Hello, I put my favorites on my external hard drive, and no I can't put them in firefox
Hello, I made in the past set my favorites on my drive hard extern and now, I wanted to put them in firefox, but it does not work. What could do?
https://support.Mozilla.com/en-us/KB/backing+up+and+restoring+bookmarks
-
Changed HARD drive and now I can not install windows 7
I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.
See if it works...
Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).
Copy the files to a flash usb without all the folders drive.
With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.
After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.
You should now see the storage driver files listed.
If you check the box, it only includes the compatible driver.
Follow the prompts and I hope, will install W7.
-
I inserted a disc in the drive and it does not recognize the drive and the disc, so I tried to eject, but I can't. So far nothing online seems to have helped. What should I do?
Hello
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_ejectBe careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.htmlThe method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrkHow to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330Also have heard double tape on a credit card or play can work.
=======================================================
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
-
Can I copy some time Machines began on a disk Seagate NAS is now almost complete on a new MyCloud WD and operate?
A new Macbook Pro purchased 2 weeks ago was the first backup until the older Seagate and I want to continue on a new drive WD MyCloud.
Is this possible? If Yes, any detailed wisdom on how to make available?
Thank you
You cannot "continue" a Time Machine backup to a different drive, but you can transfer a.
-
Bus SM driver and USB Ports can Point of Yellow Exclamation
H8-1020 Desktop
Windows 7, 64-bit
Looked in Device Manager and that's what I see:
Bus SM driver with yellow exclamation point
The USB drive letter even have
Looked at the HP website for the Chipset drivers and only saw the BIOS drivers. Tried this update. No change.
A run DXDIAG. Don't see where USB or SM Bus drivers are listed.
Note the system has a discreet graphics card.
Other suggestions?
Thanks to all the proposals. But good ' ol Google saved the day. I googled "hpe sm bus controller driver update" and it adds Windows 7. One of the HP forum reply recently was to go to the Intel download page and download the Intel chipset drivers. Did. Exclamation point is more ugly next to the SM Bus controller.
Don't you think that it would be under the drivers for the MOBO or BIOS? Or Chipset drivers?
The audio device is another problem. Looks like the sound card has a dead chip. Installed a new card his discreet and now music to my ears.
(Historical note: it all started when the original Pegatron Carmel mother died.) Ordered a new one on ebay (same model and revision). If I had the Intel chipset first, I wouldn't have had to wipe and re-install the operating system.
Thanks again. I always learn a lot!
Darryl
-
My count does not recognize a disc in my D drive and so I can not burn discs.
When I try to burn discs, I get error messages telling me that there is no disc in the drive, when there is a disc in the drive. Help me
Hello
1. have you installed any third-party CD - DVD burning software?
Method 1.
To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
Reference:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problemsMethod 2.
The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
http://support.Microsoft.com/kb/321641/I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I HAVE A DRIVE AND REDEMPTION CODE CAN NOT GET IT TO DOWN LOAD TO MY COMPUTER, HELLLLLP!
CAN'T THIS DOWN LOAD TO MY COMPUTER, HELLLLLP! DRIVE JUST SHOULD INSTALL IT I THOUGHT, ADD CODE REDEMPTION AND IM IN LAW? WRONGGGG, THEY WANT A SERIAL NUMBER, I DO NOT HAVE AND CAN NOT FIND!... NOW, WHAT
Hello
You can check the following links for assistance
Numbers of students and teachers edition series, redemption codes and product codes
-
Here is the picture you can see the icons appear small and text how solve this problem is on the side of Adobe so that they can remedy. Already tried Microsoft Tech agents, but they said that there is problem with Adobe.
He has this trick if you want to try: http://www.danantonielli.com/adobe-app-scaling-on-high-dpi-displays-fix/
-
I downloaded 'Slims add on Manager' and now I can't find it anywhere.
{Ctrl + Shift + A}
-
I have it turned off and I can connect OK. I don't know what else this Extension is not sure if I should be deactivated permanently. How can I contact the people who made it?
Tools > Addons > Extensions
Find this extension in this list and then click on it to make it appear highlighted. Then right-click on it and choose on this extension , or visit the home page - I hope that who created this extension took advantage of one of these features.
-
I lost my phone 5.3 and replaced by a new. Cannot get my new phone on my icloud account.
Try the settings/general/reset/Reset all settings.
-
Satellite Pro L50 - a: how to replace the memory, HARD drive and battery
I just uploaded 2 new video from Youtube on the L50 - A. Satellite Pro
The first is a tear down showing how to replace the memory, hard drive and battery (you can also clean the fan if it detects overheating).
http://www.YouTube.com/watch?v=IG0lW7t92bI
BTW why they made it so difficult to get just to the battery in this model?
WARNING - proceed at your own risk and don't forget static precautions!
Hope they help and if you have any questions let me know.
+ The message was edited: link has been removed ad channel may not +.
Thanks for these videos. It may be useful to replace the memory, but I think that the owners of the laptop should not open the case. This may void the warranty.
Be careful about this. -
No Internet after the new hard drive and Windows 7 Clean reinstall
I have a Dell Studio XPS 9100 I bought in 2011.
The Seagate Barracuda SATA 1 TB hard drive died, and I replaced it with a Seagate Barracuda 2 TB drive. The re - install Windows 7 went ok, but I couldn't connect to the net.
A ran the device driver and got errors on the network card and the RAID.
I went on the site of Dell for the 9100 and installed the drivers for the adapter and the RAID.
No luck. I always get the error "no card" as well as the error 'no cable not connected.
I read a lot of posts about this problem and am stuck.
Someone has an idea how I can fix this once and for all and go on the internet?
I advise to patch Windows 7 with the WSUS Offline Update:
http://dellwindowsreinstallationguide.com/WSUS-offline-update/
Dell System Software:
http://ftp.Dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe
Intel Chipset Device Software:
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
NEC USB 3.0 host driver:
http://downloads.Dell.com/comm/R266197.exe
Card reader:
http://downloads.Dell.com/Input/R266195.exe
Intel Matrix Storage Manager:
http://downloads.Dell.com/SATA/Intel_Matrix-Storage-Manager_A01_R230056.exe
Realtek NIC:
http://downloads.Dell.com/Network/R266204.exe
Atheros Wireless Card:
http://downloads.Dell.com/FOLDER02988710M/1/Network_Driver_9T8XY_WN32_10.0.0.309_A03.exe
Note make sure that all the drivers for Dell extract and install and extract not only. If they extract only you will need to manually launch the setup.exe in the extracted folder.
-
Original title: How to I can't remove my 1st hard drive program files?
Basically, I got a new laptop for games with Windows 7 on it, and I know almost nothing about computers. So it all starts on my SSD (180 GB) and I want to move to my 2nd hard drive (750 GB) HHD. I want to keep windows and steam (platform game) on my SSD and move almost everything on my other hard drive. When I move everything on it works, but when I try and do a right-click and delete the programs or program filex (x 86) it says I don't have permission. So I give myself permission and ownership of the program files, but it does not work. I tried to remove anything that did not come on the computer and what I just said try again, but it still does not work. I have tried myself giving full ownership of readers, but it still does not work. He always tells me that I need permission from myself. Is any way for me to have my computer recognizes the HHD as the primary drive, and then I can move Windows and Steam my SSD? And all that would remove? (If yes let me know if I can put the drivers I have on a flash, so they are removed). Any help or advice would be great! Thanks for reading and you're time and effort!)
P. S.Do not forget that I know little to nothing about computers, so just assume I know nothing and give me instructions step by step, if it is possible.May peace be with you,AlexBasically, you can not, you need to uninstall the programs, then custom Setup to the location/reader of your choice, even in this case a lot of files will always be located on your windows disk.
When you install a program many entries are written to the registry, if you try to move a program, if you can, the registry entries will be incorrect then the program will stop working.
Maybe you are looking for
-
Inject an apple ID and PW using the Configurator 2?
Hi all Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I. see you soon, Kristian.
-
12.4.1.6 update library went. !!
has gotten sucked into updating iTunes to win... worm 12.4.1.6. big mistake... during the opening of library is empty... so I did the shift + open to select the file library... then my library file but when I open iTunes it shows all files, its still
-
Should I charge the battery before first use?
Hello Should I charge the battery before using the iPad 2 air for the first time? I made this whith many peripheral but never with an Apple product. Is it recommended? Thank you for answer
-
Tecra M11 - intermediate driver wireless XP
looking for a little help trying to find the driver for this laptop. Toshiba Tecra M11 - 11L PTME1E-00D005EN The driver in question is the intermediate driver wireless. I have tried many many pilots across the net, but still no joy. Thanks in advance
-
Whenever I start my computer, I get the following error; "Parser Message: RCINT failure." STRINGTABLE ID not found. "42" to line 462. " It does not even stop my machine gently. I have to putoff my power of the machine. If anyone has a solution please