Random Tunnel IPSec Packet drops
Hi experts,
I am trying to solve a problem of fall of random package for tunneling IPSec between two VTI. For more than a month, we could not see not any question, and from today, we have 30% through a tunnel packet loss IPSec.
After analysis, I have concluded that packet loss is located somewhere on the way to the uc520 to the 2921. Package account see the correctly on the output interface physics uc520, but the number of packets is low on the interface of penetration on the 2921.
Pings outside of the tunnel by the way are very good.
I also deleted the tunnels on both ends and after they have recovery, the question was always present.
Pointers on research where packets get lost?
RR-hq-2921 #ping 10.1.13.1 g0/1 source rep 100
Type to abort escape sequence.
Send 100, echoes ICMP 100 bytes to 10.1.13.1, wait time is 2 seconds:
Packet sent with a source address of 10.1.1.1
!!..!.!!!!!!!!!..!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
..!!.!!!!!!!!!!!.!!!!!!!!.!!!!
Topology:
[uc520] == HAVE == {{{cloud}}} == MODEM == [2921]
Test:
Claire 2921 # counters g0/0
Disable "show interface" counters on this interface [confirm]
% CLEAR-5-COUNTERS: claire counter on interface GigabitEthernet0/0
Execute on uc520: ping
This is supposed to increase rapidly the number of packets at a distance of 4000 packages, as it has done on the output uc520 interface # 2921 sho int g0/0 | I entered the packages 3348 packets input, 607812 bytes, 0 no buffer< missing="" ~650=""> # 2921 sho int g0/0 GigabitEthernet0/0 is up, line protocol is up Material is CN Gigabit Ethernet, the address is XXXXXXXX Description: Outdoors - WAN port The Internet address is XXX.XXX.XXX.XXX/YY MTU 1500 bytes, BW 35000 Kbit/s, 10 DLY usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set KeepAlive set (10 sec) Full-Duplex, 1 Gbps, media type is RJ45 control output stream is XON, control of input stream is XON Type of the ARP: ARPA, ARP Timeout 04:00 Last entry of 00:00:00, 00:00:00 exit, exit hang never Final cleaning of the counters 'show interface' 00:00:42 Input queue: 0/75/0/0 (size/max/drops/dumps); Total output drops: 0 Strategy of queues: fifo Output queue: 0/40 (size/max) 30 second entry rate 75000 bps, 51 packets/s exit rate of 30 seconds 77000 bps, 52 packets/s 3456 packets input, 619794 bytes, 0 no buffer Received 0 emissions (0 of IP multicasts) 0 Runts, 0 giants, 0 shifters entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored Watchdog 0, multicast 0, break 0 comments 3454 packets output, 632194 bytes, 0 underruns 0 output errors, 0 collisions, 0 resets interface unknown protocol 0 drops 0 babbles, collision end 0, 0 deferred carrier, 0 no carrier, lost 0 0 interrupt output output buffer, the output buffers 0 permuted 0 failures Good infor Now, did you ask your ISP if they made the last changes made? I think that your suspcious is correct and if the number of packets do not match, then probably something in the environment has changed, since it worked before with the same configuration and IOS versions. HTH. Tags: Cisco Security HTTPS protocol between the client vpn and host of the internet through tunnel ipsec-parody Hello We have a cisco ASA 5505 and try to get the next job: ip (192.168.75.5) - connected to the Cisco ASA 5505 VPN client the customer gets a specific route for an internet address (79.143.218.35 255.255.255.255 192.168.75.1 192.168.75.5 100) When I try to access the url of the client, I get a syn sent with netstat When I try trace ASA package, I see the following:
Not found no corresponding stream, creating a new stream
in 0.0.0.0 0.0.0.0 outdoors
Access-group outside_access_in in interface outside outside_access_in list extended access permitted tcp everything any https eq access-list outside_access_in note hyperion outside inside
When I try the reverse (i.e. from the internet host to vpn client), it seems to work:
Not found no corresponding stream, creating a new stream
in 192.168.75.5 255.255.255.255 outside
Access-group outside_access_in in interface outside outside_access_in of access allowed any ip an extended list
My question is why this phenomenon happens and how solve us this problem? Thanks in advance, Sipke our running-config: : Saved : ASA Version 8.0 (4) !
ciscoasa hostname domain somedomain activate the password - encrypted passwd - encrypted names of name 10.10.1.0 Hyperion name 164.140.159.x xxxx name 192.168.72.25 xxxx name 192.168.72.24 xxxx name 192.168.72.196 xxxx name 192.168.75.0 vpn clients name 213.206.236.0 xxxx
name 143.47.160.0 xxxx name 141.143.32.0 xxxx name 141.143.0.0 xxxx name 192.168.72.27 xxxx name 10.1.11.0 xxxx name 10.1.2.240 xxxx name 10.1.1.0 xxxx name 10.75.2.1 xxxx name 10.75.2.23 xxxx name 192.168.72.150 xxxx name 192.168.33.0 xxxx name 192.168.72.26 xxxx name 192.168.72.5 xxxx name 192.168.23.0 xxxx name 192.168.34.0 xxxx name 79.143.218.35 inethost ! interface Vlan1 nameif inside security-level 100 IP 192.168.72.254 255.255.255.0 OSPF cost 10 ! interface Vlan2 nameif outside security-level 0 IP address 193.173.x.x 255.255.255.240 OSPF cost 10 ! interface Vlan3 Shutdown nameif dmz security-level 50 192.168.50.1 IP address 255.255.255.0 OSPF cost 10 ! interface Vlan23 nameif wireless security-level 80 192.168.40.1 IP address 255.255.255.0 OSPF cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 3 ! interface Ethernet0/6 switchport access vlan 23 ! interface Ethernet0/7 ! passive FTP mode clock timezone THATS 1 clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00 DNS lookup field inside DNS server-group DefaultDNS domain pearle.local permit same-security-traffic inter-interface permit same-security-traffic intra-interface object-group Protocol TCPUDP object-protocol udp object-tcp protocol object-group service RDP - tcp Remote Desktop Protocol Description EQ port 3389 object object-group service UDP - udp VC range of object-port 60000 60039 object-group VC - TCP tcp service 60000 60009 object-port Beach object-group service tcp Fortis 1501 1501 object-port Beach Beach of port-object 1502-1502 Beach of port-object sqlnet sqlnet 1584 1584 object-port Beach 1592 1592 object-port Beach object-group service tcp fortis 1592 1592 object-port Beach Beach of port-object 1502-1502 1584 1584 object-port Beach Beach of port-object sqlnet sqlnet 1501 1501 object-port Beach 1500 1500 object-port Beach the DM_INLINE_NETWORK_1 object-group network object-network 192.168.50.0 255.255.255.0 object-network 192.168.72.0 255.255.255.0 object-network 192.168.40.0 255.255.255.0 object-network VPN_Pool_2 255.255.255.0 the DM_INLINE_NETWORK_2 object-group network object-network 192.168.50.0 255.255.255.0 object-network 192.168.72.0 255.255.255.0 object-group network inside-networks object-network 192.168.72.0 255.255.255.0 WingFTP_TCP tcp service object-group Secure FTP description port-object eq 989 port-object eq 990 DM_INLINE_TCP_1 tcp service object-group port-object eq ftp port-object eq ftp - data Group object WingFTP_TCP DM_INLINE_TCP_2 tcp service object-group port-object eq ftp port-object eq ftp - data Group object WingFTP_TCP the DM_INLINE_NETWORK_3 object-group network object-network 192.168.72.0 255.255.255.0 object-network VPN_Pool_2 255.255.255.0 the DM_INLINE_NETWORK_4 object-group network object-network 192.168.72.0 255.255.255.0 object-network VPN_Pool_2 255.255.255.0 object-group network Oracle network-object OracleTwo 255.255.224.0 network-object OracleOne 255.255.240.0 network-object OracleThree 255.255.224.0 the DM_INLINE_NETWORK_5 object-group network network-object Grandvision 255.255.255.0 network-object Grandvision2 255.255.255.240 object-network Grandvision3 255.255.255.0 host of the object-Network Grandvision4 host of the object-Network GrandVision_PC the DM_INLINE_NETWORK_6 object-group network network-object Grandvision 255.255.255.0 network-object Grandvision2 255.255.255.240 object-network Grandvision3 255.255.255.0
host of the object-Network Grandvision4 host of the object-Network GrandVision_PC the DM_INLINE_NETWORK_7 object-group network network-object Grandvision 255.255.255.0 network-object Grandvision2 255.255.255.240 object-network Grandvision3 255.255.255.0 host of the object-Network GrandVision_PC the DM_INLINE_NETWORK_8 object-group network network-object Grandvision 255.255.255.0 network-object Grandvision2 255.255.255.240 object-network Grandvision3 255.255.255.0
host of the object-Network GrandVision_PC object-group service DM_INLINE_SERVICE_2 the purpose of the ip service EQ-3389 tcp service object the DM_INLINE_NETWORK_9 object-group network network-object OracleThree 255.255.0.0 network-object OracleTwo 255.255.224.0 network-object OracleOne 255.255.240.0 object-group service DM_INLINE_SERVICE_3 the purpose of the ip service EQ-3389 tcp service object Atera tcp service object-group Atera Webbased monitoring description 8001 8001 object-port Beach 8002 8002 object-port Beach 8003 8003 object-port Beach WingFTP_UDP udp service object-group port-object eq 989 port-object eq 990 WingFTP tcp service object-group Description range of ports for the transmission of data object-port range 1024-1054 HTTPS_redirected tcp service object-group Description redirect WingFTP Server port-object eq 40200 Note to inside_access_in to access list ICMP test protocol inside outside inside_access_in list extended access allow icmp 192.168.72.0 255.255.255.0 any Note to inside_access_in to access list ICMP test protocol inside outside access-list inside_access_in note HTTP inside outside inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 any eq www access-list inside_access_in note queries DNS inside to outside inside_access_in list extended access allowed object-group TCPUDP 192.168.72.0 255.255.255.0 no matter what eq field access-list inside_access_in note the HTTPS protocol inside and outside inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any https eq Note to inside_access_in to access list ICMP test protocol inside outside access-list inside_access_in note 7472 Epo-items inside outside inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq 7472 access-list inside_access_in note POP3 inside outside inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any eq pop3 inside_access_in list extended access permit udp host LifeSize-PE-HQ any object-group UDP - VC inside_access_in list extended access permit tcp host LifeSize-PE-HQ all eq h323 access-list inside_access_in note video conference services inside_access_in list extended access permit tcp host LifeSize-PE-HQ any object-group VC - TCP inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any Note to inside_access_in to access list Fortis inside_access_in list extended access permitted tcp 192.168.72.0 255.255.255.0 any object-group Fortis access extensive list ip 192.168.40.0 inside_access_in allow 255.255.255.0 any inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any eq www inside_access_in list extended access permitted tcp 192.168.40.0 255.255.255.0 any https eq inside_access_in allowed all Hyperion 255.255.255.0 ip extended access list inside_access_in list extended access udp allowed any any eq isakmp inside_access_in list extended access udp allowed any any eq ntp inside_access_in list extended access udp allowed any any eq 4500 inside_access_in list of allowed ip extended access any Oracle object-group inside_access_in list extended access udp allowed any any eq 10000 access-list inside_access_in note PPTP inside outside inside_access_in list extended access permit tcp any any eq pptp access-list inside_access_in note WILL inside outside inside_access_in list extended access will permit a full
Note to inside_access_in to access the Infrastructure of the RIM BES server list inside_access_in list extended access permit tcp host BESServer any eq 3101 inside_access_in list extended access permit tcp any any DM_INLINE_TCP_2 object-group inside_access_in list extended access permit tcp any any HTTPS_redirected object-group access extensive list ip Hyperion 255.255.255.0 inside_access_in 255.255.255.0 allow VPN_Pool_2 inside_access_in list extended access permit udp any host 86.109.255.177 eq 1194 access extensive list ip 192.168.72.0 inside_access_in allow 255.255.255.0 DM_INLINE_NETWORK_7 object-group access extensive list ip VPN_Pool_2 inside_access_in allow 255.255.255.0 any inside_access_in list extended access deny ip any any inactive debug log Note to outside_access_in to access list ICMP test protocol outside inside outside_access_in list extended access permit icmp any one access-list outside_access_in Note SMTP outside inside outside_access_in list extended access permit tcp any any eq smtp
outside_access_in list extended access udp allowed any any eq ntp disable journal access-list outside_access_in note 7472 EPO-items outside inside outside_access_in list extended access permit tcp any any eq 7472 outside_access_in list extended access permit tcp any any object-group inactive RDP outside_access_in list extended access permit tcp any any eq www outside_access_in list extended access permit tcp any any HTTPS_redirected object-group outside_access_in list extended access permitted tcp everything any https eq access-list outside_access_in note hyperion outside inside outside_access_in list extended access permitted tcp Hyperion 255.255.255.0 DM_INLINE_NETWORK_4 object-group outside_access_in to access Hyperion 255.255.255.0 ip extended list object-group DM_INLINE_NETWORK_3 allow outside_access_in list extended access permit tcp any host LifeSize-PE-HQ eq h323 outside_access_in list extended access permit tcp any host LifeSize-PE-HQ object-group VC - TCP outside_access_in list extended access permit udp any host group-object-LifeSize-PE-HQ UDP - VC outside_access_in of access allowed any ip an extended list outside_access_in list extended access udp allowed any any eq 4500 outside_access_in list extended access udp allowed any any eq isakmp outside_access_in list extended access udp allowed any any eq 10000 outside_access_in list extended access will permit a full outside_access_in list extended access permit tcp any any eq pptp outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group outside_access_in list extended access allowed object-group ip DM_INLINE_NETWORK_8 192.168.72.0 255.255.255.0 inactive outside_access_in list extended access permit tcp any any Atera object-group outside_access_in list extended access deny ip any any inactive debug log outside_1_cryptomap list extended access allowed object-group Hyperion DM_INLINE_NETWORK_2 255.255.255.0 ip outside_1_cryptomap to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0 access extensive list ip 192.168.72.0 inside_nat0_outbound allow Hyperion 255.255.255.0 255.255.255.0 inside_nat0_outbound list of allowed ip extended access all 193.172.182.64 255.255.255.240 inside_nat0_outbound list of allowed ip extended access all 192.168.72.192 255.255.255.192 inside_nat0_outbound list of allowed ip extended access all 192.168.72.0 255.255.255.0 access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 VPN_Pool_2 255.255.255.0 access extensive list ip 192.168.72.0 inside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_5 object-group inside_nat0_outbound list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0 inside_nat0_outbound list of allowed ip extended access any Swabach 255.255.255.0 access-list 200 scope allow tcp all fortis of fortis host object-group access extensive list ip VPN_Pool_2 outside_nat0_outbound allow 255.255.255.0 DM_INLINE_NETWORK_9 object-group
outside_cryptomap_2 list extended access allowed object-group Hyperion DM_INLINE_NETWORK_1 255.255.255.0 ip outside_cryptomap_2 to access extended list ip 192.168.50.0 allow Hyperion 255.255.255.0 255.255.255.0 Note Wireless_access_in of access list, select Hyperion / wifi access NAT rule. Access extensive list ip 192.168.40.0 Wireless_access_in allow Hyperion inactive 255.255.255.0 255.255.255.0 Wireless_access_in list extended access deny ip 192.168.40.0 255.255.255.0 192.168.72.0 255.255.255.0 Comment by Wireless_access_in-list of the traffic Internet access Access extensive list ip 192.168.40.0 Wireless_access_in allow 255.255.255.0 any standard access list splittunnelclientvpn allow 192.168.72.0 255.255.255.0 splittunnelclientvpn list standard access allowed Hyperion 255.255.255.0 standard access list splittunnelclientvpn allow Pearleshare 255.255.255.0 splittunnelclientvpn list standard access allowed host 85.17.235.22 splittunnelclientvpn list standard access allowed OracleThree 255.255.224.0 standard access list splittunnelclientvpn allow 143.47.128.0 255.255.240.0 splittunnelclientvpn list standard access allowed host inethost Standard access list SplittnlHyperion allow OracleThree 255.255.0.0 Standard access list SplittnlOOD allow OracleThree 255.255.0.0 Standard access list SplittnlOOD allow 143.47.128.0 255.255.240.0 access extensive list ip 192.168.72.0 outside_cryptomap allow 255.255.255.0 DM_INLINE_NETWORK_6 object-group outside_cryptomap_1 list of allowed ip extended access all GrandVisionSoesterberg 255.255.255.0 outside_cryptomap_3 list of allowed ip extended access any Swabach 255.255.255.0
192.168.72.0 IP Access-list extended sheep 255.255.255.0 GrandVisionSoesterberg 255.255.255.0 allow 192.168.72.0 IP Access-list extended sheep 255.255.255.0 VPN_Pool_2 255.255.255.0 allow pager lines 24 Enable logging asdm of logging of information Within 1500 MTU Outside 1500 MTU MTU 1500 dmz MTU 1500 wireless local pool VPN_DHCP 192.168.72.220 - 192.168.72.235 255.255.255.0 IP mask mask 192.168.75.1 - 192.168.75.50 255.255.255.0 IP local pool VPN_Range_2 no failover ICMP unreachable rate-limit 1 burst-size 1 ICMP allow any inside ICMP allow all outside ASDM image disk0: / asdm - 613.bin don't allow no asdm history ARP timeout 14400 Global 1 interface (outside) NAT (inside) 0 access-list sheep NAT (inside) 1 0.0.0.0 0.0.0.0 NAT (wireless) 1 192.168.40.0 255.255.255.0 public static tcp (indoor, outdoor) interface smtp smtp Mailsrv_Pearle_Europe netmask 255.255.255.255 public static tcp (indoor, outdoor) interface ftp ftp netmask 255.255.255.255 Pearle-DC02 public static 990 Pearle-DC02 990 netmask 255.255.255.255 interface tcp (indoor, outdoor) static (inside, outside) tcp 3389 3389 Mailsrv_Pearle_Europe netmask 255.255.255.255 interface public static tcp (indoor, outdoor) interface www Pearle-DC02 www netmask 255.255.255.255 public static 40200 Pearle-DC02 40200 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static tcp (indoor, outdoor) interface https Exchange2010 https netmask 255.255.255.255 public static tcp (indoor, outdoor) interface h323 h323 LifeSize-PE-HQ netmask 255.255.255.255 public static 60000 60000 LifeSize-PE-HQ netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 interface tcp (indoor, outdoor) public static (inside, outside) udp interface 60001 LifeSize-PE-HQ 60001 netmask 255.255.255.255 public static (inside, outside) udp interface 60002 LifeSize-PE-HQ 60002 netmask 255.255.255.255 public static (inside, outside) udp interface 60003 LifeSize-PE-HQ 60003 netmask 255.255.255.255 public static (inside, outside) udp interface 60004 LifeSize-PE-HQ 60004 netmask 255.255.255.255 public static (inside, outside) udp interface 60005 LifeSize-PE-HQ 60005 netmask 255.255.255.255 public static (inside, outside) udp interface 60006 LifeSize-PE-HQ 60006 netmask 255.255.255.255 public static (inside, outside) udp interface 60007 LifeSize-PE-HQ 60007 netmask 255.255.255.255 public static (inside, outside) udp interface 60008 LifeSize-PE-HQ 60008 netmask 255.255.255.255 public static (inside, outside) udp interface 60009 LifeSize-PE-HQ 60009 netmask 255.255.255.255 public static (inside, outside) udp interface 60010 LifeSize-PE-HQ 60010 netmask 255.255.255.255 public static (inside, outside) udp interface 60011 LifeSize-PE-HQ 60011 netmask 255.255.255.255 public static (inside, outside) udp interface 60012 LifeSize-PE-HQ 60012 netmask 255.255.255.255 public static (inside, outside) udp interface 60013 LifeSize-PE-HQ 60013 netmask 255.255.255.255 public static (inside, outside) udp interface 60014 LifeSize-PE-HQ 60014 netmask 255.255.255.255 public static (inside, outside) udp interface 60015 LifeSize-PE-HQ 60015 netmask 255.255.255.255 public static (inside, outside) udp interface 60016 LifeSize-PE-HQ 60016 netmask 255.255.255.255 public static (inside, outside) udp interface 60017 LifeSize-PE-HQ 60017 netmask 255.255.255.255 public static (inside, outside) udp interface 60018 LifeSize-PE-HQ 60018 netmask 255.255.255.255 public static (inside, outside) udp interface 60019 LifeSize-PE-HQ 60019 netmask 255.255.255.255 public static (inside, outside) udp interface 60020 LifeSize-PE-HQ 60020 netmask 255.255.255.255 public static (inside, outside) udp interface 60021 60021 LifeSize-PE-HQ netmask 255.255.255.255 public static (inside, outside) udp interface 60022 LifeSize-PE-HQ 60022 netmask 255.255.255.255 public static (inside, outside) udp interface 60023 LifeSize-PE-HQ 60023 netmask 255.255.255.255 public static (inside, outside) udp interface 60024 LifeSize-PE-HQ 60024 netmask 255.255.255.255
public static (inside, outside) udp interface 60025 LifeSize-PE-HQ 60025 netmask 255.255.255.255 public static (inside, outside) udp interface 60026 LifeSize-PE-HQ 60026 netmask 255.255.255.255 public static (inside, outside) udp interface 60027 LifeSize-PE-HQ 60027 netmask 255.255.255.255 public static (inside, outside) udp interface 60028 LifeSize-PE-HQ 60028 netmask 255.255.255.255 public static (inside, outside) udp interface 60029 LifeSize-PE-HQ 60029 netmask 255.255.255.255 public static (inside, outside) udp interface 60030 LifeSize-PE-HQ 60030 netmask 255.255.255.255 public static (inside, outside) udp interface 60031 LifeSize-PE-HQ 60031 netmask 255.255.255.255 public static (inside, outside) udp interface 60032 LifeSize-PE-HQ 60032 netmask 255.255.255.255 public static (inside, outside) udp interface 60033 LifeSize-PE-HQ 60033 netmask 255.255.255.255 public static (inside, outside) udp interface 60034 LifeSize-PE-HQ 60034 netmask 255.255.255.255 public static (inside, outside) udp interface 60035 LifeSize-PE-HQ 60035 netmask 255.255.255.255 public static (inside, outside) udp interface 60036 LifeSize-PE-HQ 60036 netmask 255.255.255.255 public static (inside, outside) udp interface 60037 LifeSize-PE-HQ 60037 netmask 255.255.255.255 public static (inside, outside) udp interface 60038 LifeSize-PE-HQ 60038 netmask 255.255.255.255 public static (inside, outside) udp interface 60039 LifeSize-PE-HQ 60039 netmask 255.255.255.255 public static (inside, outside) udp interface 60040 60040 LifeSize-PE-HQ netmask 255.255.255.255 public static Mailsrv_Pearle_Europe 7472 netmask 255.255.255.255 7472 interface tcp (indoor, outdoor) public static LanSweep-XP netmask 255.255.255.255 8001 8001 interface tcp (indoor, outdoor) public static 8002 8002 LanSweep-XP netmask 255.255.255.255 interface tcp (indoor, outdoor)
public static LanSweep-XP netmask 255.255.255.255 8003 8003 interface tcp (indoor, outdoor) static (inside, outside) 193.173.12.194 tcp https Pearle-DC02 https netmask 255.255.255.255 inside_access_in access to the interface inside group Access-group outside_access_in in interface outside Access-group Wireless_access_in in wireless interface Route outside 0.0.0.0 0.0.0.0 193.173.12.206 1 Route outside OracleThree 255.255.224.0 193.173.12.198 1 Route outside 143.47.128.0 255.255.240.0 193.173.12.198 1 Route inside 172.27.0.0 255.255.255.0 Pearle-DC02 1 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute dynamic-access-policy-registration DfltAccessPolicy AAA authentication LOCAL telnet console the ssh LOCAL console AAA authentication Enable http server http 192.168.40.0 255.255.255.0 Wireless http 192.168.1.0 255.255.255.0 inside http 192.168.72.0 255.255.255.0 inside http GrandVisionSoesterberg 255.255.255.0 inside SNMP-server host inside 192.168.33.29 survey community public version 2 c location of Server SNMP Schiphol contact Server SNMP SSmeekes SNMP-Server Public community Server enable SNMP traps snmp authentication linkup, linkdown cold start Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac Crypto ipsec transform-set esp-aes-256 GRANDVISION esp-md5-hmac life crypto ipsec security association seconds 28800 Crypto ipsec kilobytes of life - safety 4608000 association Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5 Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map card crypto outside_map0 1 match address outside_cryptomap_1 outside_map0 card crypto 1jeu pfs outside_map0 card crypto 1jeu peer 212.78.223.182
outside_map0 card crypto 1jeu transform-set ESP ESP-3DES-SHA-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-ESP ESP-3DES-MD5 MD5-DES-SHA ESP-DES-MD5 outside_map0 map 1 lifetime of security association set seconds 28800 crypto card crypto outside_map0 1 set security-association life kilobytes 4608000 card crypto game 2 outside_map0 address outside_cryptomap_2 outside_map0 crypto map peer set 2 193.173.12.193 card crypto outside_map0 2 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5 life card crypto outside_map0 2 set security-association seconds 28800 card crypto outside_map0 2 set security-association life kilobytes 4608000 card crypto outside_map0 3 match address outside_1_cryptomap outside_map0 card crypto 3 set pfs outside_map0 card crypto 3 peers set 193.172.182.66 outside_map0 crypto map 3 the value transform-set ESP-3DES-SHA life card crypto outside_map0 3 set security-association seconds 28800 card crypto outside_map0 3 set security-association life kilobytes 4608000 card crypto outside_map0 game 4 address outside_cryptomap outside_map0 card crypto 4 peers set 213.56.81.58
outside_map0 4 set transform-set GRANDVISION crypto card life card crypto outside_map0 4 set security-association seconds 28800 card crypto outside_map0 4 set security-association life kilobytes 4608000 card crypto outside_map0 5 match address outside_cryptomap_3 outside_map0 card crypto 5 set pfs outside_map0 crypto card 5 peers set 86.109.255.177 outside_map0 card crypto 5 game of transformation-ESP ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5-DES-SHA ESP-DES-MD5 life card crypto outside_map0 5 set security-association seconds 28800 card crypto outside_map0 5 set security-association life kilobytes 4608000 Crypto map outside_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP outside_map0 interface card crypto outside crypto ISAKMP allow inside crypto ISAKMP allow outside crypto ISAKMP enable dmz crypto ISAKMP enable wireless crypto ISAKMP policy 5 preshared authentication 3des encryption sha hash Group 2 life 86400 Telnet 192.168.72.0 255.255.255.0 inside Telnet timeout 5 SSH 192.168.72.0 255.255.255.0 inside SSH GrandVisionSoesterberg 255.255.255.0 inside SSH 213.144.239.0 255.255.255.192 outside SSH timeout 5 Console timeout 0 management-access inside dhcpd dns 194.151.228.18 is 10.10.1.100 dhcpd outside auto_config ! dhcpd address 192.168.72.253 - 192.168.72.253 inside ! dhcpd address dmz 192.168.50.10 - 192.168.50.50 dhcpd enable dmz ! dhcpd address wireless 192.168.40.10 - 192.168.40.99 dhcpd dns 194.151.228.18 wireless interface dhcpd activate wireless ! a basic threat threat detection host of statistical threat detection statistical threat detection port Statistical threat detection Protocol Statistics-list of access threat detection no statistical threat detection tcp-interception Group Policy "pearle_vpn_Hyp only" internal attributes of Group Policy "pearle_vpn_Hyp only". value of server WINS 192.168.72.25 value of server DNS 192.168.72.25 Protocol-tunnel-VPN IPSec l2tp ipsec Split-tunnel-policy tunnelspecified value of Split-tunnel-network-list SplittnlHyperion Split-dns value pearle.local internal pearle_vpn_OOD_only group policy attributes of the strategy of group pearle_vpn_OOD_only value of Split-tunnel-network-list SplittnlOOD internal pearle_vpn group policy attributes of the strategy of group pearle_vpn value of server WINS 192.168.72.25 value of server DNS 192.168.72.25 Protocol-tunnel-VPN IPSec l2tp ipsec svc Split-tunnel-policy tunnelspecified value of Split-tunnel-network-list splittunnelclientvpn Pearle.local value by default-field Split-dns value pearle.local username anyone password encrypted password username something conferred VPN-group-policy pearle_vpn_OOD_only type of remote access service tunnel-group 193 type ipsec-l2l tunnel-group 193 ipsec-attributes pre-shared-key *. tunnel-group 193.173.12.193 type ipsec-l2l IPSec-attributes tunnel-group 193.173.12.193 pre-shared-key *. NOCHECK Peer-id-validate type tunnel-group pearle_vpn remote access tunnel-group pearle_vpn General-attributes address pool VPN_Range_2 Group Policy - by default-pearle_vpn
pearle_vpn group of tunnel ipsec-attributes pre-shared-key *. type tunnel-group Pearle_VPN_2 remote access attributes global-tunnel-group Pearle_VPN_2 address pool VPN_Range_2 strategy-group-by default "pearle_vpn_Hyp only". IPSec-attributes tunnel-group Pearle_VPN_2 pre-shared-key *. tunnel-group 213.56.81.58 type ipsec-l2l IPSec-attributes tunnel-group 213.56.81.58 pre-shared-key *. tunnel-group 212.78.223.182 type ipsec-l2l IPSec-attributes tunnel-group 212.78.223.182 pre-shared-key *. tunnel-group 86.109.255.177 type ipsec-l2l IPSec-attributes tunnel-group 86.109.255.177 pre-shared-key *. ! class-map inspection_default match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters
message-length maximum 512 Policy-map global_policy class inspection_default inspect the preset_dns_map dns inspect the ftp inspect h323 h225 inspect the h323 ras inspect the rsh inspect the rtsp inspect the skinny inspect sunrpc inspect xdmcp inspect the sip inspect the netbios inspect the tftp inspect the pptp ! global service-policy global_policy context of prompt hostname Cryptochecksum:7d4d9c7ca7c865d9e40f5d77ed1238eb : end ASDM image disk0: / asdm - 613.bin ASDM BESServer 255.255.255.255 inside location ASDM VPN_Pool_2 255.255.255.0 inside location ASDM OracleTwo 255.255.224.0 inside location ASDM OracleOne 255.255.240.0 inside location ASDM OracleThree 255.255.224.0 inside location ASDM location Exchange2010 255.255.255.255 inside ASDM location Grandvision 255.255.255.0 inside ASDM Grandvision2 255.255.255.240 inside location ASDM Grandvision3 255.255.255.0 inside location ASDM Grandvision4 255.255.255.255 inside location ASDM GrandVision_PC 255.255.255.255 inside location ASDM location LanSweep-XP 255.255.255.255 inside ASDM GrandVisionSoesterberg 255.255.255.0 inside location ASDM location Pearle-DC02 255.255.255.255 inside ASDM location Pearle-WDS 255.255.255.255 inside ASDM location Swabach 255.255.255.0 inside ASDM GrandVisionSoesterberg2 255.255.255.0 inside location don't allow no asdm history Where is that host (inethost)? Inside of the ASA, or on the internet (on the outside)? If it is outside, you must configure the NAT for the pool of vpn as you turn on the SAA. NAT (outside) 1 192.168.75.0 255.255.255.0 IPSEC packets are not encrypted Hello (and Happy Thanksgiving in the USA), We recently switched our ASA and applied again the saved for the new device configuration. There is a VPN site-to site that works and a remote VPN client that does not work. We use certain Cisco VPN clients and some Shrew Soft VPN clients. I compared the config of the ASA again to that of ASA old and I can't find all the differences (but the remote client VPN was working on the old ASA). Remote clients connect and a tunnel is created, but they are unable to pass traffic. Systems on the network where the ASA are able to access the internet. Out of sho isakmp crypto his (ignore peer #1, this is the site to site VPN work) HIS active: 2 Generate a new key SA: 0 (a tunnel report Active 1 and 1 generate a new key ITS d) Total SA IKE: 2 1 peer IKE: xx.168.155.98 Type: L2L role: answering machine Generate a new key: no State: MM_ACTIVE 2 IKE peers: xx.211.206.48 Type: user role: answering machine Generate a new key: no State: AM_ACTIVE Output of sho crypto ipsec his (info about VPN site-to-site deleted). Packets are decrypted but unencrypted. Tag crypto map: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: publi c ip local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0) Remote ident (addr, mask, prot, port): (10.20.1.100/255.255.255.255/0/0) current_peer: xx.211.206.48, username: me dynamic allocated peer ip: 10.20.1.100 #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0 #pkts decaps: 20, #pkts decrypt: 20, #pkts check: 20 compressed #pkts: 0, unzipped #pkts: 0 #pkts uncompressed: 0, comp #pkts failed: 0, #pkts Dang failed: 0 success #frag before: 0, failures before #frag: 0, #fragments created: 0 Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0 #send errors: 0, #recv errors: 0 endpt local crypto. : public-ip/4500, crypto endpt distance. : xx.211.206.48/4 500 Path mtu 1500, fresh ipsec generals 82, media, mtu 1500 current outbound SPI: 7E0BF9B9 current inbound SPI: 41B75CCD SAS of the esp on arrival: SPI: 0x41B75CCD (1102535885) transform: aes - esp esp-sha-hmac no compression running parameters = {RA, Tunnel, NAT-T program,} slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP calendar of his: service life remaining key (s): 28776 Size IV: 16 bytes support for replay detection: Y Anti-replay bitmap: 0x00000000 0x00000001 SPI: 0xC06BF0DD (3228299485) transform: aes - esp esp-sha-hmac no compression running parameters = {RA, Tunnel, NAT-T program Rekeyed} slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP calendar of his: service life remaining key (s): 28774 Size IV: 16 bytes support for replay detection: Y Anti-replay bitmap: 0x000003FF 0xFFF80001 outgoing esp sas: SPI: 0x7E0BF9B9 (2114714041) transform: aes - esp esp-sha-hmac no compression running parameters = {RA, Tunnel, NAT-T program,} slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP calendar of his: service life remaining key (s): 28774 Size IV: 16 bytes support for replay detection: Y Anti-replay bitmap: 0x00000000 0x00000001 SPI: 0xCBF945AC (3422111148) transform: aes - esp esp-sha-hmac no compression running parameters = {RA, Tunnel, NAT-T program Rekeyed} slot: 0, id_conn: 16384, crypto-card: SYSTEM_DEFAULT_CRYPTO_MAP calendar of his: service life remaining key (s): 28772 Size IV: 16 bytes support for replay detection: Y Anti-replay bitmap: 0x00000000 0x00000001 Config of ASA : Saved : Written by me at 19:56:37.957 pst Tuesday, November 26, 2013 ! ASA Version 8.2 (4) ! hostname mfw01 domain company.int enable encrypted password xxx XXX encrypted passwd names of Name xx.174.143.97 description cox cox-gateway Gateway
name 172.16.10.0 iscsi-description iscsi network name 192.168.1.0 network heritage heritage network description name 10.20.50.0 management-description management network name 10.20.10.0 network server server-description name 10.20.20.0 user-network description user-network name 192.168.1.101 private-em-imap description private-em-imap name 10.20.10.2 description of private Exchange private-Exchange name 10.20.10.3 description of private-private ftp ftp name 192.168.1.202 description private-private-ip-phones ip phones, name 10.20.10.6 private-kaseya kaseya private description
name 192.168.1.2 private mitel 3300 description private mitel 3300 name 10.20.10.1 private-pptp pptp private description name 10.20.10.7 private-sharepoint description private-sharepoint name 10.20.10.4 private-tportal private-tportal description name 10.20.10.8 private-xarios private-xarios description name 192.168.1.215 private-xorcom description private-xorcom Name xx.174.143.99 description public Exchange public-Exchange public xx.174.143.100 public-ftp ftp description name Name xx.174.143.101 public-tportal public tportal description Name xx.174.143.102 public-sharepoint description public-sharepoint name of the public ip description public-ip-phones-phones xx.174.143.103 name mitel-public-3300 xx.174.143.104 description public mitel 3300 Name xx.174.143.105 public-xorcom description public-xorcom xx.174.143.108 public-remote control-support name description public-remote control-support Name xx.174.143.109 public-xarios public xarios description Name xx.174.143.110 public-kaseya kaseya-public description Name xx.174.143.111 public-pptp pptp-public description name Irvine_LAN description Irvine_LAN 192.168.2.0 Name xx.174.143.98 public-ip name 10.20.10.14 private-RevProxy description private-RevProxy Name xx.174.143.107 public-RevProxy description public RevProxy name 10.20.10.9 private-XenDesktop description private-XenDesktop Name xx.174.143.115 public-XenDesktop description public-XenDesktop name 10.20.1.1 private-bridge description private-bridge name 192.168.1.96 description private-remote control-support private-remote control-support ! interface Ethernet0/0 public nameif security-level 0 IP address public ip 255.255.255.224 ! interface Ethernet0/1 Speed 100 full duplex nameif private security-level 100 address private-gateway IP, 255.255.255.0 ! interface Ethernet0/2 Shutdown No nameif no level of security no ip address ! interface Ethernet0/3 Shutdown No nameif no level of security no ip address ! interface Management0/0 nameif management security-level 100 the IP 192.168.0.1 255.255.255.0 management only ! passive FTP mode clock timezone pst - 8 clock summer-time recurring PDT DNS server-group DefaultDNS domain mills.int object-group service ftp the tcp eq ftp service object the purpose of the tcp eq ftp service - data object-group service DM_INLINE_SERVICE_1 Group-object ftp the eq tftp udp service object DM_INLINE_TCP_1 tcp service object-group port-object eq 40 EQ port ssh object object-group service web-server the purpose of the service tcp eq www the eq https tcp service object object-group service DM_INLINE_SERVICE_2 EQ-tcp smtp service object object-group web server object-group service DM_INLINE_SERVICE_3 EQ-ssh tcp service object object-group web server object-group service kaseya the purpose of the service tcp eq 4242 the purpose of the service tcp 5721 eq EQ-8080 tcp service object the eq 5721 udp service object object-group service DM_INLINE_SERVICE_4 Group-object kaseya object-group web server object-group service DM_INLINE_SERVICE_5 will the service object the eq pptp tcp service object object-group service VPN will the service object ESP service object the purpose of the service ah the eq pptp tcp service object EQ-udp 4500 service object the eq isakmp udp service object the MILLS_VPN_VLANS object-group network object-network 10.20.1.0 255.255.255.0 Server-network 255.255.255.0 network-object user-network 255.255.255.0 network-object 255.255.255.0 network-object-network management legacy-network 255.255.255.0 network-object
object-group service InterTel5000 the purpose of the service tcp 3998 3999 range the 6800-6802 range tcp service object the eq 20001 udp service object the purpose of the udp 5004 5007 range service the purpose of the udp 50098 50508 range service the purpose of the udp 6604 7039 range service the eq bootpc udp service object the eq tftp udp service object the eq 4000 tcp service object the purpose of the service tcp eq 44000 the purpose of the service tcp eq www the eq https tcp service object the purpose of the service tcp eq 5566 the eq 5567 udp service object the purpose of the udp 6004 6603 range service the eq 6880 tcp service object object-group service DM_INLINE_SERVICE_6 ICMP service object the eq 2001 tcp service object the purpose of the service tcp eq 2004 the eq 2005 tcp service object object-group service DM_INLINE_SERVICE_7 ICMP service object
Group object InterTel5000 object-group service DM_INLINE_SERVICE_8 ICMP service object the eq https tcp service object EQ-ssh tcp service object RevProxy tcp service object-group RevProxy description port-object eq 5500 XenDesktop tcp service object-group Xen description EQ object of port 8080 port-object eq 2514 port-object eq 2598 object-port 27000 eq port-object eq 7279 port-object eq 8000 port-object eq citrix-ica public_access_in list any host public-ip extended access allowed object-group DM_INLINE_SERVICE_8 public_access_in list any host public-ip extended access allowed object-group VPN public_access_in list extended access allowed object-group DM_INLINE_SERVICE_7 any host public-ip-phones public_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 any public ftp host public_access_in allowed extended access list tcp any host public-xorcom DM_INLINE_TCP_1 object-group public_access_in list extended access allowed object-group DM_INLINE_SERVICE_2 any host public-Exchange public_access_in allowed extended access list tcp all welcome RevProxy-public-group of objects RevProxy public_access_in list extended access allowed object-group DM_INLINE_SERVICE_3 any host public-remote control-support public_access_in list extended access allowed object-group DM_INLINE_SERVICE_6 any host public-xarios public_access_in list extended access allowed object-group web server any host public-sharepoint public_access_in list extended access allowed object-group web server any host public-tportal public_access_in list extended access allowed object-group DM_INLINE_SERVICE_4 any host public-kaseya public_access_in list extended access allowed object-group DM_INLINE_SERVICE_5 any host public-pptp public_access_in list extended access permit ip any host public-XenDesktop private_access_in list extended access permit icmp any one private_access_in of access allowed any ip an extended list VPN_Users_SplitTunnelAcl list standard allowed server-network access 255.255.255.0 VPN_Users_SplitTunnelAcl list standard allowed user-network access 255.255.255.0 VPN_Users_SplitTunnelAcl standard access list allow management-network 255.255.255.0 VPN_Users_SplitTunnelAcl standard access list allow 10.20.1.0 255.255.255.0 VPN_Users_SplitTunnelAcl standard access list allow legacy-network 255.255.255.0 private_nat0_outbound list extended access allowed object-group ip MILLS_VPN_VLANS 255.255.255.0 Irvine_LAN private_nat0_outbound list extended access allowed object-group ip MILLS_VPN_VLANS 10.20.1.96 255.255.255.240 private_nat0_outbound list extended access allowed object-group ip MILLS_VPN_VLANS 10.90.2.0 255.255.255.0 public_1_cryptomap list extended access allowed object-group ip MILLS_VPN_VLANS 255.255.255.0 Irvine_LAN public_2_cryptomap list extended access allowed object-group ip MILLS_VPN_VLANS 10.90.2.0 255.255.255.0 pager lines 24 Enable logging list of logging level warnings error events Monitor logging warnings logging warnings put in buffered memory logging trap warnings exploitation forest asdm warnings e-mail logging warnings private private-kaseya host connection forest-hostdown operating permits
logging of trap auth class alerts MTU 1500 public MTU 1500 private management of MTU 1500 mask 10.20.1.100 - 10.20.1.110 255.255.255.0 IP local pool VPN_Users no failover ICMP unreachable rate-limit 1 burst-size 1 don't allow no asdm history ARP timeout 14400 Global interface 101 (public) private_nat0_outbound of access list NAT 0 (private) NAT (private) 101 0.0.0.0 0.0.0.0 NAT (management) 101 0.0.0.0 0.0.0.0 static DNS (private, public) public-private-netmask 255.255.255.255 ip phones, ip phones, static DNS (private, public) private public-ftp-ftp netmask 255.255.255.255 static (private, public) public-private-xorcom netmask 255.255.255.255 xorcom dns static DNS (private, public) public Exchange private-Exchange netmask 255.255.255.255 RevProxy-public (private, public) public static private-RevProxy netmask 255.255.255.255 dns static DNS (private, public) public-remote control-support private-remote control-support netmask 255.255.255.255 static (private, public) public-private-xarios netmask 255.255.255.255 xarios dns static public-sharepoint (private, public) private-sharepoint netmask 255.255.255.255 dns TPORTAL-public (private, public) public static private-tportal netmask 255.255.255.255 dns static (private, public) public-private-netmask 255.255.255.255 kaseya kaseya dns static public-pptp (private, public) private-pptp netmask 255.255.255.255 dns
static public-XenDesktop (private, public) private-XenDesktop netmask 255.255.255.255 dns Access-group public_access_in in the public interface Access-group behind closed doors, interface private_access_in Public route 0.0.0.0 0.0.0.0 cox-gateway 1 Private server network route 255.255.255.0 10.20.1.254 1 Route private user-network 255.255.255.0 10.20.1.254 1 Private networking route 255.255.255.0 10.20.1.254 1 Route private network iscsi 255.255.255.0 10.20.1.254 1 Private heritage network 255.255.255.0 route 10.20.1.254 1 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 Admin-control LDAP attribute-map Comment by card privileged-level name LDAP attribute-map allow dialin name of the msNPAllowDialin IETF-Radius-class card msNPAllowDialin card-value FALSE NOACCESS msNPAllowDialin card-value TRUE IPSecUsers attribute-map LDAP Mills-VPN_Users name of the msNPAllowDialin IETF-Radius-class card msNPAllowDialin card-value FALSE NOACCESS map-value msNPAllowDialin true IPSecUsers LDAP attribute-map network admins memberOf IETF Radius-Service-Type card name map-value memberOf NOACCESS FAKE map-value memberOf 'Network Admins' 6 dynamic-access-policy-registration DfltAccessPolicy AAA-server protocol nt Mills host of Mills (private) AAA-server private-pptp auth-ms01.mills.int NT domain controller AAA-server Mills_NetAdmin protocol ldap AAA-server Mills_NetAdmin (private) host private-pptp Server-port 389 or base LDAP-dn = San Diego, dc = factories, dc = int or LDAP-group-base dn = San Diego, dc = factories, dc = int LDAP-scope subtree name attribute LDAP cn LDAP-login-password *. LDAP-connection-dn cn = asa, OU = Service accounts, or = San Diego, dc = factories, dc = int microsoft server type LDAP-attribute-map-Mills-VPN_Users AAA-server NetworkAdmins protocol ldap AAA-server NetworkAdmins (private) host private-pptp or base LDAP-dn = San Diego, dc = factories, dc = int or LDAP-group-base dn = San Diego, dc = factories, dc = int LDAP-scope subtree name attribute LDAP cn LDAP-login-password *. LDAP-connection-dn cn = asa, OU = Service accounts, or = San Diego, dc = factories, dc = int microsoft server type LDAP-attribute-map network-admins AAA-server ADVPNUsers protocol ldap AAA-server ADVPNUsers (private) host private-pptp or base LDAP-dn = San Diego, dc = factories, dc = int or LDAP-group-base dn = San Diego, dc = factories, dc = int LDAP-scope subtree name attribute LDAP cn LDAP-login-password *.
LDAP-connection-dn cn = asa, OU = Service accounts, or = San Diego, dc = factories, dc = int microsoft server type LDAP-attribute-map-Mills-VPN_Users Console to enable AAA authentication LOCAL ADVPNUsers Console HTTP authentication of the AAA ADVPNUsers LOCAL AAA authentication serial console LOCAL ADVPNUsers Console Telnet AAA authentication LOCAL ADVPNUsers authentication AAA ssh console LOCAL ADVPNUsers Enable http server http 0.0.0.0 0.0.0.0 management http 0.0.0.0 0.0.0.0 public http 0.0.0.0 0.0.0.0 private Community private private-kaseya SNMP-server host * version 2 c Server SNMP - San Diego location plants contact SNMP server, help the Mills Server enable SNMP traps snmp authentication linkup, linkdown cold start Sysopt noproxyarp private Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac life crypto ipsec security association seconds 28800 Crypto ipsec kilobytes of life - safety 4608000 association Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto public_map 1 match address public_1_cryptomap card crypto public_map 1 set pfs card crypto public_map 1 set xx.168.155.98 counterpart card crypto public_map 1 the value transform-set ESP-3DES-MD5-ESP-AES-128-SHA public_map card crypto 1 set nat-t-disable card crypto public_map 1 phase 1-mode of aggressive setting card crypto public_map 2 match address public_2_cryptomap card crypto public_map 2 pfs set group5 card crypto public_map 2 peers set xx.181.134.141 card crypto public_map 2 game of transformation-ESP-AES-128-SHA public_map card crypto 2 set nat-t-disable public_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP public crypto map public_map interface crypto ISAKMP enable public crypto ISAKMP policy 1 preshared authentication aes encryption sha hash Group 5 life 86400 crypto ISAKMP policy 10 preshared authentication aes encryption sha hash Group 2 life 86400 crypto ISAKMP policy 30 preshared authentication 3des encryption md5 hash Group 1 lifetime 28800 Telnet 0.0.0.0 0.0.0.0 private Telnet timeout 5 SSH 0.0.0.0 0.0.0.0 public SSH 0.0.0.0 0.0.0.0 private SSH 0.0.0.0 0.0.0.0 management SSH timeout 5 Console timeout 0 management of 192.168.0.2 - dhcpd addresses 192.168.0.254 ! a basic threat threat detection Statistics-list of access threat detection a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200 authenticate the NTP NTP server 216.129.110.22 public source NTP server 173.244.211.10 public source NTP server 24.124.0.251 public source prefers WebVPN allow the public enable SVC internal group NOACCESS strategy NOACCESS group policy attributes VPN - concurrent connections 0 VPN-tunnel-Protocol svc internal IPSecUsers group strategy attributes of Group Policy IPSecUsers value of server WINS 10.20.10.1 value of server DNS 10.20.10.1 Protocol-tunnel-VPN IPSec allow password-storage Split-tunnel-policy tunnelspecified value of Split-tunnel-network-list VPN_Users_SplitTunnelAcl Mills.int value by default-field the address value VPN_Users pools Irvine internal group policy Group Policy attributes Irvine Protocol-tunnel-VPN IPSec
username admin password encrypted in Kra9/kXfLDwlSxis type VPNUsers tunnel-group remote access tunnel-group VPNUsers General attributes address pool VPN_Users authentication-server-group Mills_NetAdmin Group Policy - by default-IPSecUsers tunnel-group VPNUsers ipsec-attributes pre-shared-key *. tunnel-group xx.189.99.114 type ipsec-l2l tunnel-group xx.189.99.114 General-attributes Group Policy - by default-Irvine XX.189.99.114 group of tunnel ipsec-attributes pre-shared-key *. tunnel-group xx.205.23.76 type ipsec-l2l tunnel-group xx.205.23.76 General-attributes Group Policy - by default-Irvine XX.205.23.76 group of tunnel ipsec-attributes pre-shared-key *. tunnel-group xx.168.155.98 type ipsec-l2l tunnel-group xx.168.155.98 General-attributes Group Policy - by default-Irvine XX.168.155.98 group of tunnel ipsec-attributes pre-shared-key *. ! Global class-card class match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters message-length maximum 512 World-Policy policy-map Global category inspect the dns inspect esmtp inspect the ftp inspect h323 h225 inspect the h323 ras inspect the netbios inspect the rsh inspect the rtsp inspect the sip inspect the skinny inspect sqlnet inspect sunrpc inspect the tftp inspect xdmcp ! service-policy-international policy global privilege level 3 mode exec cmd command perfmon privilege level 3 mode exec cmd ping command mode privileged exec command cmd level 3 logging of the privilege level 3 mode exec cmd commands privilege level 3 exec command failover mode cmd privilege level 3 mode exec command packet cmd - draw privilege show import at the level 5 exec mode command privilege level 5 see fashion exec running-config command order of privilege show level 3 exec mode reload privilege level 3 exec mode control fashion show privilege see the level 3 exec firewall command mode privilege see the level 3 exec mode command ASP. processor mode privileged exec command to see the level 3 privilege command shell see the level 3 exec mode privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show privilege see the level 3 exec command access-list mode logging of orders privilege see the level 3 exec mode privilege, level 3 see the exec command mode vlan privilege show level 3 exec command ip mode privilege, level 3 see fashion exec command ipv6 privilege, level 3 see the exec command failover mode privilege, level 3 see fashion exec command asdm exec mode privilege see the level 3 command arp command routing privilege see the level 3 exec mode privilege, level 3 see fashion exec command ospf privilege, level 3 see the exec command in aaa-server mode AAA mode privileged exec command to see the level 3 privilege, level 3 see fashion exec command eigrp privilege see the level 3 exec mode command crypto privilege, level 3 see fashion exec command vpn-sessiondb privilege level 3 exec mode command ssh show privilege, level 3 see fashion exec command dhcpd privilege, level 3 see fashion exec command vpn privilege level see the 3 blocks from exec mode command privilege, level 3 see fashion exec command wccp privilege, level 3 see the exec command in webvpn mode privilege control module see the level 3 exec mode privilege, level 3 see fashion exec command uauth privilege see the level 3 exec command compression mode level 3 for the show privilege mode configure the command interface level 3 for the show privilege mode set clock command level 3 for the show privilege mode configure the access-list command level 3 for the show privilege mode set up the registration of the order level 3 for the show privilege mode configure ip command level 3 for the show privilege mode configure command failover level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command level 3 for the show privilege mode configure the command routing level 3 for the show privilege mode configure aaa-order server level mode 3 privilege see the command configure aaa level 3 for the show privilege mode configure command crypto level 3 for the show privilege mode configure ssh command level 3 for the show privilege mode configure command dhcpd level 5 mode see the privilege set privilege to command privilege level clear 3 mode exec command dns host logging of the privilege clear level 3 exec mode commands clear level 3 arp command mode privileged exec AAA-server of privilege clear level 3 exec mode command privilege clear level 3 exec mode command crypto level 3 for the privilege cmd mode configure command failover clear level 3 privilege mode set the logging of command privilege mode clear level 3 Configure arp command clear level 3 privilege mode configure command crypto clear level 3 privilege mode configure aaa-order server context of prompt hostname call-home Profile of CiscoTAC-1 no active account http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email address of destination [email protected] / * / destination-mode http transport Subscribe to alert-group diagnosis Subscribe to alert-group environment Subscribe to alert-group monthly periodic inventory monthly periodicals to subscribe to alert-group configuration daily periodic subscribe to alert-group telemetry Cryptochecksum:5d5c963680401d150bee94b3c7c85f7a Maybe my eyes is glazed looking at it for too long. Something seems wrong? Maybe I missed a command that would not appear in the config? Thanks in advance to those who take a glance. We see that the UI is sent the echo request but there is no response to echo. This seems to be a routing problem between the ASA and the host you are trying to ping. You can see the range so that the traffic to 10.20.1.0 network is routed to the ASA. If there is no other routing device make sure that the default gateway is correct on the host computer, you're trying to reach. If you try to ping a windows machine make sure that the windows firewall is disabled or allows ICMP. -- Please do not forget to rate and choose a response from xorrect DMVPN questions - IPsec packets Hi all Currently, I am configuring DMVPN for the first time. I followed the guide to configuring cisco and Googling a bit other strands however seems to have hit a brick wall. The Setup is in a lab environment, so I can post as much information as required, but here's the important bits: I have 3 routers Cisco 2821 running IOS 12.4 (15) with a layer 3 switch in the Middle connecting ports 'wan' together. the routing works fine, I can ping to each of the other router router. Excerpts from the hub router config: crypto ipsec transform-set DMVPN_SET esp-3des esp-md5-hmac ! crypto ipsec profile DMVPN_PRJ set transform-set DMVPN_SET ! interface Tunnel0 bandwidth 10000 ip address 172.17.100.1 255.255.255.0 no ip redirects ip mtu 1500 ip nhrp authentication secretid ip nhrp map multicast dynamic ip nhrp network-id 101 ip nhrp holdtime 450 ip tcp adjust-mss 1460 tunnel source GigabitEthernet0/0 tunnel mode gre multipoint tunnel key 10101 tunnel protection ipsec profile DMVPN_PRJ ! interface GigabitEthernet0/0 description HQ WAN ip address 1.1.1.1 255.255.255.248 ip nat outside ip virtual-reassembly duplex auto speed auto ! and here's the config on the first router spoke: crypto ipsec transform-set DMVPN_SET esp-3des esp-md5-hmac ! crypto ipsec profile DMVPN_PRJ set transform-set DMVPN_SET ! interface Tunnel0 bandwidth 3000 ip address 172.17.100.10 255.255.255.0 no ip redirects ip mtu 1500 ip nhrp authentication secretid ip nhrp map 172.17.100.1 1.1.1.1 ip nhrp map multicast 1.1.1.1 ip nhrp network-id 101 ip nhrp holdtime 450 ip nhrp nhs 172.17.100.1 ip tcp adjust-mss 1460 tunnel source GigabitEthernet0/0 tunnel mode gre multipoint tunnel key 10101 tunnel protection ipsec profile DMVPN_PRJ ! interface GigabitEthernet0/0 description Site 1 WAN ip address 11.11.11.1 255.255.255.248 ip nat outside ip virtual-reassembly duplex auto speed auto ! If I closed/no farm tunnel0 on RADIUS 1 interface, I get the following error on the hub router: Mar 30 13:41:17.075: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC packet. (ip) vrf/dest_addr= /1.1.1.1, src_addr= 11.11.11.1, prot= 47 so I feel im lack some config on the side talking to encrypt the traffic, but I'm not sure what. Here's the output router spoke: RTR_SITE1#sh dmvpn detail Legend: Attrb --> S - Static, D - Dynamic, I - Incompletea N - NATed, L - Local, X - No Socket # Ent --> Number of NHRP entries with same NBMA peer -------------- Interface Tunnel0 info: -------------- Intf. is up, Line Protocol is up, Addr. is 172.17.100.10 Source addr: 11.11.11.1, Dest addr: MGRE Protocol/Transport: "multi-GRE/IP", Protect "DMVPN_PRJ", Tunnel VRF "", ip vrf forwarding "" NHRP Details: NHS: 172.17.100.1 E Type:Spoke, NBMA Peers:1 # Ent Peer NBMA Addr Peer Tunnel Add State UpDn Tm Attrb Target Network ----- --------------- --------------- ----- -------- ----- ----------------- 1 1.1.1.1 172.17.100.1 IKE never S 172.17.100.1/32 Interface: Tunnel0 Session: [0x48E31B98] Crypto Session Status: DOWN fvrf: (none), IPSEC FLOW: permit 47 host 11.11.11.1 host 1.1.1.1 Active SAs: 0, origin: crypto map Outbound SPI : 0x 0, transform : Socket State: Closed Pending DMVPN Sessions: RTR_SITE1#sh ip nhrp detail 172.17.100.1/32 via 172.17.100.1, Tunnel0 created 00:33:44, never expire Type: static, Flags: used NBMA address: 1.1.1.1 RTR_SITE1#sh crypto ipsec sa interface: Tunnel0 Crypto map tag: Tunnel0-head-0, local addr 11.11.11.1 protected vrf: (none) local ident (addr/mask/prot/port): (11.11.11.1/255.255.255.255/47/0) remote ident (addr/mask/prot/port): (1.1.1.1/255.255.255.255/47/0) current_peer 1.1.1.1 port 500 PERMIT, flags={origin_is_acl,} #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 46, #recv errors 0 local crypto endpt.: 11.11.11.1, remote crypto endpt.: 1.1.1.1 path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0 current outbound spi: 0x0(0) inbound esp sas: inbound ah sas: inbound pcp sas: outbound esp sas: outbound ah sas: outbound pcp sas: All these commands appear as empty when I throw them on the hub router. Any help appreciated. Thank you No negotiate is because you do not have an Ike key implemented. You need Crypto ISAKMP policy 1 BA (whatever) AUTH pre-shared Group (whatever) ISAKMP crypto key 0 some secret address 0.0.0.0 0.0.0.0 Hun and talks must match. Your IPSec transform-set should also have "transport mode". Sent by Cisco Support technique iPad App Problem with tunnel IPSEC with NAT Hello I had an ipsec tunnel between a former Cisco router at a remote site. I'm the config 887 to an ASA migration. The remote site cannot establish the tunnel. This is the only site having problems. There are one number of other sites remote connection back without problem. The Setup is 192.168.1.x (main site inside) - ASA - 86.x.x.x (outside) - Internet - 159.x.x.x (side remote outdoors) - Firewall - 10.10.10.x The remote site will not accept the 192.168.1.x range so I'm NATing 192.168.50.x which is what they want to see The config I have is network of the NAT_TO_Remote1 object NAT NAT_TO_Remote1 (Interior, exterior) destination 192.168.1.0 source static static Remote1 Remote1 IKEv1 crypto policy 30 Crypto ipsec transform-set esp-3des esp-sha-hmac ikev1 3DES-SHA1 card crypto Outside_map 10 corresponds to the address Qualcom_VPN RemoteSite_VPN list extended access allowed host ip 192.168.50.20 10.10.10.0 255.255.252.0 tunnel-group 159.x.x.x type ipsec-l2l I was wondering if I'm missing something obvious here. Hello You must check the IPSEC transform set and see if they have enabled PFS group or not? card crypto Outside_map 10 set pfs Group1 Try using group2, or turn it off. Kind regards Aditya Please evaluate the useful messages and mark the correct answers. Client VPN with tunneling IPSEC over TCP transport does not Hello world Client VPN works well with tunneling IPSEC over UDP transport. I test to see if it works when I chose the VPN client with ipsec over tcp. Under the group policy, I disabled the IPSEC over UDP and home port 10000 But the VPN connection has failed. What should I do to work VPN using IPSEC over TCP Concerning MAhesh Mahesh, You must use "ikev1 crypto ipsec-over-tcp port 10000. As crypto isakmp ipsec-over-tcp work on image below 8.3 HTH Receive packets dropped on all the 4 vmnic ESXi 5.1, three hosts, 31 VMs all the hardware version 9 with the updated tools In the performance tab, I show the data network in real time with only "reception of packets dropped" checked My host and all 4 of the vmnic present ignored packets What is strange, is the graph is a line flat for the host and all the 4 vmnic, for example for the host, it's a constant ignored packets 42 130 Two of the vmnic are attached to a Vswitch which are supported by two 1 GB Cisco switches in the back of my IBM Bladecenter Two of the vmnic are attached to a DVSwitch which is supported by two IBM 10 GB switches at the back of my IBM Bladecenter This is an instant screen that shows this. Although this screenshot shows a host, three guests are experiencing the same thing No idea why this is happening? The type of this metric is "summons". This means that the value represented is always the sum total of all the matches have taken place so far (so all packets ignored til now). You've probably had a number of frames being dropped in the past, but not now, which will result in a flat line for this particular counter. Check (r) esxtop for detailed and statistics. vDS - evacuation packets dropped Hi all! I need a little help with the statistics of port drops and vDS package. The problem is: I observe millions of packages of the infiltration of Exception on all 4-links of my single switch vDS and probably tens of millions fell Egress packets on all ports of vDS independently a port group to which they belong. What I saw: -I see these drops on a statistic at the VM level (performance > network) as well, but only for RX. -I encounter connectivity problems at the level of the same application if (no packet loss in guest operating system or when ping logs). -Statistical physical switch signals no error/throw packages. -Nothing significant in the journals of vSpehre -Low traffic and low load VM -No warnings not reported on vSphere vDS switch health monitoring is enabled and reports normal status This is why I would like to ask several questions: -What is 'Packages coward Egress' actually means in terms of stats vDS? What are these packages and why they are loose -How to reset the counters of these packages? -are there any low level network of diagnostic tools for vSphere/ESXi? Versions: ESXi 5.1u1, vCenter 5.1u1 I would be very grateful if someone could give a clue to what is happening or advise at least a direction for further investigation. Thank you. As you said yourself, you do not experience real problems even if this large number of ignored packets is displayed, no? An incorrect report on ignored packages seems to be known for a while: http://KB.VMware.com/kb/2052917 This problem occurs when the packets filtered by the string of IO are poorly recorded as ignored packets. It is a question, the packets are not lost, so they cannot be seen using esxtop or other network monitoring tools. See also: https://communities.VMware.com/message/2272239#2272239 https://communities.VMware.com/thread/452787 -There are pushed beacon (ethertype 0 x 8922) broadcasts on the network (despite it's disabled on each hos - Net.MaxBeaconsAtOnce set to 0). 0 x 8922 ethertype emissions are used not only to probe lighthouse, but also for the new feature distributed vSwitch 5.1 network health check. If you have enabled that? The source MAC of these frames is encoded in the format 00:50:56:5 [random value]: [last 2 byte of physics vmnic MAC]. Equium M40X - slow internet packets dropped I use a wi - fi connection and my pc keeps dropping packets from time to time (and also not connected via LAN) making my internet connection is a bit slow. Reflection on the upgrade of BIOS and wireless driver here but it of too risky, time-consuming and can it not cure all cases. I have AVG Anti-Virus installed, you run scan and no viruses found. Any ideas I can try to find out what is the cause. see you soon Hello I put t know if it s really a problem! However, the WLan driver update should be done initially to check if this could sort the WiFi issue but to be honest I m not sure if it is a WLan problem, due to the fact that this also occurs when you use the local network. I think you should check if a Windows updates are possible and available. NAT traffic on tunneling IPSec (ISR) Hello. I assumed that I have configure IPSec tunnel between a kind of 1811 and some checkpoint firewall. The IPSec part isen t that big of a deal, but system on the absence of "Side CheckPoint" traffic manager if the tunnel must be from a public IP address and the only source of IP address. So, let's say that my ISP gave me 10.10.1.1 - 10.10.1.5, our clients Interior have an IP address of 192.168.10.0/24 range and the remote application in the site "Checkpoint" is the IP address of 172.16.1.10. The result should be: IPSec tunnel is created by using the IP address 10.10.1.1 . Traffic of 192.168.1.0/24 customers should access the application to the address 172.16.1.10 using as a source above the IPSec tunnel address 10.10.1.2 . Is this possible? I guess that would mean I have NAT traffic goes, however, the IPSec tunnel, but I'm unable to get this to work. I googled all day long looking for something similar. Anyone who could enlighten us? Any ideas appreciated. Sheers! / Johan Christensson Yes, it is possible. That you should get what you need. Let us know if it works or not. extended policy-NAT IP access list ip permit 192.168.1.0 0.0.0.255 host 172.16.1.10 nat pool IP LAN-Checkpoint 10.10.1.2 10.10.1.2 netmask 255.255.255.0 IP nat inside source list policy-NAT pool LAN-point of overload control ACL by crypto-interesting setting direct tunnel IPSEC-L2L Hi all I need to put additional hosts on the existing ACL crypto-interesting on a tunnel directly with real-time traffic. I have a network-side remote engineer to apply the same to their end. My question is it will interrupt existing tunnel/traffic if we put additional hosts on the ACL on both sides at the same time? Thank you! Each permit in TS in ACL generates its own IPsec security association. There should be no impact on existing services - just pay more attention is not to introduce any overlap of the ACL. Another topic that is very often updated card crypto DB that sometimes one must remove and re-add the crypto map configuration - which will cause traffic distruption. Marcin Tunnel IPSec (dyn.) Cisco <>- Binteq (stat.) I try to config Cisco VPN connection for the next destination http://www.Funkwerk-EC.com/prod_bintec_vpn_ipsec_test_access_de, 14690, 194.html As "Pre-shared Key identity" is necessary, I'm looking for a proper function. On the basic document: PDF document in 5 Minuten - VPN gateway VPN (page 24) of the given URL, it seems they use phase 2 with PFS to group 2, then try to add that in your strategy of phase 2 in the router. 'set pfs group2' in a dynamic crypto map configuration. Hi, Will PIX 515 allow packets through the tunnels, IPSec, the external interface to the DMZ interface? You have an idea? These are the interfaces Securiy levels. ethernet0 nameif outside security0 nameif ethernet1 inside the security100 nameif ethernet2 security10 intf2 Rephrase what you do is you want to your dmz and your inside subnets interface to talk to the remote network via the vpn tunnel. Your home is 10.3.111.0/24 and your intf2 is 10.4.120.0/24 and your remote network you want to talk through the tunnel located on level counterpart 192.168.40.30 located on your external interface. You also have a single host 192.168.22.20 location on intf2 you want to go through the tunnel. But you don't want your intf2 directly connect makes it through the tunnel, just the single host location of this int. If you do put in place with this laboratory? The ip address of your peers, it's a private address is why im asking and check. Inside network is 10.3.9.0/24. You need to clarify a few things here for me. Card dsl crypto, you have a matching 160 address which is: access-list 160 deny ip 10.3.111.0 255.255.255.0 host 192.168.22.20 access-list 160 permit ip 10.3.111.0 255.255.255.0 10.3.9.0 255.255.255.0 access-list 160 allow host ip 192.168.22.20 10.3.9.0 255.255.255.0 You don't need your reject order, if this is not allowed, his does not. Your interesting traffic to access list should read should read: access-list 160 permit ip 10.3.111.0 255.255.255.0 10.3.9.0 255.255.255.0 access-list 160 allow host ip 192.168.22.20 10.3.9.0 255.255.255.0 You have also this same access list tied to you "nat (inside) 0", what needs to change. You are missing your "nat (intf2) 0 ' statement well and we need to have separate access to each nat statement list." So, follow these steps: IP 10.3.111.0 allow Access-list sheep 255.255.255.0 10.3.9.0 255.255.255.0 NAT (inside) 0 access-list sheep nonatintf2 list of allowed access host ip 192.168.22.20 10.3.9.0 255.255.255.0 nonatintf2 (intf2) NAT 0 access list Do clear xlate, wr mem and a reload. Test again. Should work. For the record, do not remove access list 160 without delettrage firstly your card crypto or you lock your pix. Kurtis Durrett IPSec and packet loss: Question Hello, hopefully a simple Question :-) Can someone tell me what happens when an IPSec packet is lost. He get fired? are just the TCP packets inside IPSec resentment tunnel? I hope someone can help! Background: VoIP. We have Home office users. Some have a quality of voice some terrible have a perfect quality, even if they all use the same hardware and configurations (name of user/passwords different and IP addresses of course) Fraser There isn't anything in IPSec that would retransmit a lost package. It is the native protocol and terminal stations that communicate in order to determine if there is packet loss and whether or not to broadcast. If I understand your comment correctly that you are dealing with individual users do VOIP, then more things you mention, which is different (name of user and password and addresses) almost certainly dealing with various different service providers / Internet connectivity. It would be interesting to do a ping extended with a large number of ping packets to a user who experiences problems and one that does not. I suspect that you will see a significant difference in packet loss. HTH Rick Using Loopback Interface as Source GRE/IPSec tunnel Hi all: I need one to spend a working router to router VPN tunnel using an IP WAN IP interface loopback as a source. I am able to ping the loopback from the other router. As soon as I change the source of tunnel to use the loopback IP address, change the encryption ACL map, and move the cryptographic card of the WAN interface to the loopback interface, the tunnel will not come to the top. If I remove all the crypto config, the tunnel comes up fine as just a GRE tunnel. On the other router, I see the message that says that's not encrypting the traffic below. * 00:10:33.515 Mar 1: % CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd package not an IPSEC packet. (ip) vrf/adr_dest = 192.168.0.1, src_addr = 192.168.1.2, prot = 47 What Miss me? Is there something else that needs to be done to use the closure of a GRE/IPSec tunnel? I have install below config in the laboratory to see if I can get it even work in a non-production environment. R1 WAN IP: 192.168.0.1 R2 WAN IP: 192.168.0.2 R2 Closure: 192.168.1.2 hostname R2 ! crypto ISAKMP policy 1 BA 3des md5 hash preshared authentication Group 2 ISAKMP crypto key abc123 address 192.168.0.1 ! Crypto ipsec transform-set esp-3des esp-md5-hmac T1 transport mode ! crypto map 1 VPN ipsec-isakmp Description remote control defined peer 192.168.0.1 game of transformation-T1 match address VPN1 ! interface Loopback0 IP 192.168.1.2 255.255.255.255 VPN crypto card ! Tunnel1 interface IP 172.30.240.2 255.255.255.252 IP mtu 1440 KeepAlive 10 3 tunnel source 192.168.1.2 tunnel destination 192.168.0.1 VPN crypto card ! interface FastEthernet0 IP 192.168.0.2 255.255.255.0 ! VPN1 extended IP access list allow ACCORD 192.168.1.2 host 192.168.0.1 you have tried to add "card crypto VPN 1 - address Loopback0". void demo(int a[][64]) { } int main(void) { int b[20][128]; demo(b); return 0; } Look at this simple source code, compiler of LabWindows/CVI just let pass without even a warning! From there, we can see is the weakness of the control of static type of How to disable the popups HP Rewards Hello Whenever I change the cartridge of my Officejet Pro 8600, I get 2 windows pop up on some "HP Rewards" program: It's really annoying. I don't care about HP Rewards, I just want to print. Please tell me how I can uninstall or disable these window help stall a printer wireless driver Windows 7 computer and HP Photosmart 3100 installation problem driver. Rpet not installed driver. Prints a document, but does not scan. Have you tried re installing several times. Went to solve problems and tried to solve this problem, but it can Hello I'm looking for a simple source J2ME GPS code to test in my blackberry JDE and Simulator. Before I learn J2ME GPS, I want first of all to download a source code example, compile and test the application. I googled some of them, but many of them BlackBerry Smartphones Application Update gel & several data Mails Hi, I'm new to the forum so please excuse the mistakes of beginners. I have a Blackberry 8310 and the other day when using the Desktop Manager synchronization message came "Verification of updates of device applications. Please wait... » But the offSimilar Questions
192.168.50.0 subnet 255.255.255.0
network of the Remote1 object
subnet 10.10.10.0 255.255.252.0
preshared authentication
3des encryption
sha hash
Group 2
life 86400
card crypto Outside_map 10 set peer 159.x.x.x
card crypto Outside_map 10 set transform-set 3DES-SHA1 ikev1
card crypto Outside_map 10 set pfs Group1
Outside_map interface card crypto outside
RemoteSite_VPN list extended access allowed host ip 192.168.50.30 10.10.10.0 255.255.252.0
RemoteSite_VPN list extended access allowed host ip 192.168.50.40 10.10.10.0 255.255.252.0
tunnel-group 159.x.x.x General-attributes
Group Policy - by default-RemoteSites
159.x.x.x group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
I had my wifi router has changed and he always does.
My gut feeling is some process is suddenly from time to time and slow things down (my mouse movements sometimes freeze for a few seconds).
I've defragged and run the registry cleaner.
I very often use WiFi and I noticed a similar issue.
But it really depends on the site and server I connect.
If the new versionis available BIOS, check if the BIOS update helps.
The use of a firewall might have a bad influence on the transmission too!Maybe you are looking for