Randomization of questions for each quiz attempt

Similar Questions

• The question for quiz user

  Hello

  I use 8 Captivate. Y at - it marked a way for a learner to see the full list of quiz questions - with answers, correct/incorrect, after completing a quiz?

  I gave them your comments after each question and a total number of correct answers at the end, but some learners it would be useful to all the questions, with their answers, see on a screen.

  Thank you

  Laura

  You will need the user variables to store the good and the answer for each question. There are a few system quiz variables that are useful, such as cpQuizInfoAnswerChoice, but they are reused on each slide of the question. This means that you need to assign its value to a variable user for each slide of the question.

  Some tips for this variable should be found in:

  Secrets of cpQuizInfoAnswerChoice and... - Captivate blog

• multiple choice with partial credit question, I have 10 responses only 6 are correct.  How to assign 10 points for each of the six correct answers for a total of 60 points setting?

  How can I assign partial credit so that for each possible answer 6 out of 10 each correct answer gets 10 points each, with a possible total score of 60 points quiz?

  To Captivate 7, please go to the Quizzing workspace. You will have the properties and properties Quiz Panel visible. I will now repeat the workflow, I explained briefly for CP7:

  • Check the partial score in the Quiz properties and also multiple responses.
  • Indicate the correct answers on the stage
  • Select the first correct answer on the stage text caption and indicate its score (10pts) in the properties panel, not in the Quiz properties!
  • Repeat the same for each correct answer
  • Check the total score in the properties of the Quiz Panel: should now be 60pts to the full question.

  None of the quiz system variables can be changed, they are read-only. System variables in Captivate 6 - Captivate blog explains the system variables for 6 categories, there are a few changes in 7: new features of Captivate 7.01 - Captivate blog but the Quiz category is always read-only.

• Oracle cert exams are equal weight to each of the questions - for example 1z0-117?

  Oracle cert exams are equal weight to each of the questions - for example 1z0-117?

  For example, 1z0-117 Oracle 11 g r2 SQL Tuning has 75 questions.

  Some of these questions you will have to look a long explain plan

  and determine what is happening.

  Other issues could be just take 2 of the 4.

  Is equal weight each question.

  Roger

  Is equal weight each question.

  Yes.  And each issue is 100% right or 100% false.  There is no middle ground with multiple answer questions.

• I'm trying to redeploy Adobe Acrobat Standard DC to my users, because the licenses have been removed by mistake; they have up-to-date copies on their computers desktop and I got more licenses for each of them. My question is that each user will have to go

  I'm trying to redeploy Adobe Acrobat Standard DC to my users, because the licenses have been removed by mistake; they have up-to-date copies on their computers desktop and I got more licenses for each of them.

  My question is that each user will have to go through another download and installation of the product?

  I don't think. I guess that they would be required to sign in or provide the number you gave them. Acrobat would continue as a trial until they click on "license this software ' or see help > Sign In.

• Options for the quiz in Captivate reviews

  Hi all

  I have a problem showing feedback for a quiz (Multiple choice with multiple answers questions (Eg: Answer - A and c.).) I wanted to show feedback to each wrong attempt by the user, until the user select the correct answer. I mean that I have to show several incorrect feedback for all bad multiple attempts made by the user. Is this possible? If so, please guide me by.

  
  

  Thanks in advance.

  Best regards,

  Mhamed.

  Advanced answer options is only possible for the MCQ with a correct answer, with multiple answers, to questions of default. I'm sorry. It is possible with advanced actions, but will be a lot of work, do not know if you feel him?

  Lilybiri

• Different results Quiz after Quiz attempt message

  Hello

  We have an assessment that is fixed at 60 percent, with two attempts. We want to customize the quiz attempts to result message after that learners have reached the limit of quiz.

  Captivate does not have a second quiz result message when learners have exhausted their attempts.

  The same quiz result message appears twice. We want to have a result message different quiz after the second attempt.

  Even the return to the quiz through advanced actions doesn't seem to work.

  Does anyone have a possible workaround for this solution?

  We use 6 CP.

  Thank you

  Hello

  Action to return to Quiz is supposed to when you get out of the scope of normal question slides (which will extend the dynamic range quiz) by dragging a user in a content slide, recover from this content slide to the question slide that it was before the navigation. If this has nothing to do with your goal. In what context have you tried to use it and how?

  Avinash, hope you don't mind when I say that you simply for many, it won't be so easy. User will have to take care also of the "past" situation, and in addition you must hide the text captions that might have been visible in previous situations. And there is still the default Quiz results message that appears if you don't take care of this as well!

  Here is my solution:

  1. Go to the settings of the Quiz, preferences and open "Quiz result Messages", uncheck the two pass/fail messages; normally they would appear in the placeholder review, you can reduce its size, move it, but don't delete it (may cause problems). Configure the other options (such as the number of attempts)
  2. Create captions of text or shapes used as containers of text for each attempt AND the Pass message. put them all to invisible. In the example of the screenshots, I had 3 attempts to Quiz, created 4 text captions: Text_A1, Text_A2, Text_A3 (for 3 attempts) and Text_OK (to succeed)
  3. For the event of the slide from score to enter, create an advanced conditional action with 4 decisions (each has only a part of HERE, no ELSE): first 3 are fail-scenarios, is modified to Pass-scenario. Here are a few screenshots (maybe I'll post with all the screenshots on the blog if I find time today):

  

  

  

  Lilybiri

  PS You posted this at the same time, hope you read that and you'll know how to get rid of the default message

• How do I either set channel name of a graph of cluster or get a 1 d waveform chart to start different time (t0) for each line of the waveform?

  I have a chart single 2D out a conditional of a loop indexing output such that over the rows of the table are not the same size. -Basically, they have different starting and ending points and sizes. -Not so concerned by the endpoints, because as soon as I get correctly starting points, everything shows fall in place.

  The challenge is that when I try to have the variable t0 (start time) for each line, the wave of construction vi form would always keep each line at the same starting point.

  I used the approach bundled with success (the cluster approach ensures that each waveform starts at different times according to the guidelines of my t0 defined for each line) but then I'm not able to get in the channel names I could make using the graphical approach (wave generation) waveform.

  In essence what I get here, I'm losing here.

  Because I don't want one of my mentors, Bob and Altenbach have fed up with me I have attached a vi this time

  Attached VI shows a combination of the two attempts (first with the waveform graph) and then with the graph of cluster

  1. with the first (graphical waveform), I get my channel names as you wish, but the alignment of the wave is not correct.

  2. with the second (graphical cluster), the alignment is good, but I can't do the names of channel in the chart, even if they are present in the cluster.

  I read some reviews that mentions that attributes can be displayed with waveform and data Dynamics (not clsuters) so I guess that's why.

  I saw another report indicating the start time for a waveform 1 d will always remain the same for the rest lines defined for the first line even if changed for the following lines in a loop.

  So I guess my question is: what is the way around questions like that?

  First of all, let me be the first to the congratulate and thank you for finally posting a code!  I'm not 100% certain I understand your question or your code, but I have an idea, perhaps, of what you want to do, so I wrote a little VI who made something simple that could be relevant.

  You mention waveforms of different lengths and beginning at different times.  You also want everyone to have a unique attribute (although I'm not sure what you want to do with the attribute).  So, I did the following:

  1. Generated an array of 100-sample random to represent one second of a waveform.
  2. Created 4 waveforms on this 100-sample basis.  The first waveform (channel 0) is just these 100 points.  The second, 1 channel, is the concatenation of string 0 with the base of 100 samples, or a waveform "double".  Channel 2 is 1 string concatenated with the base, and channel 3 is 2 string concatenated with the base.
  3. In order to trace the four channels that they rest 'on' the other, the waveform has the number of the channel added to it.  Channel 3 is 3 + (4 copies of the basis of 100 points), a waveform 400-point random centered around a shift of 3.
  4. All channels have dt value 0.01 (but I guess I could have varied, as well).
  5. To make the channels start at different times, I started channel N N seconds before channel 0 (by subtracting the index of the loop, I, T0).
  6. For each channel, I created an attribute called "Chan" equal to "Channel N" (where N = 0, 1, 2 or 3, as the case may be).

  This is the plot that results. Scale X is the absolute time value (no Date) using the 24-hour HH: mmS format.  You can see that the plots are 1, 2, 3 and 4 seconds of time, and are offset from each other by a second.  I used the trace attributes to change the name to the respective attribute.

  

  The code to do this is very simple - I almost don't need to show it, because I think it is completely described by the text above, but this is here:

  

  Now, it was not that much faster that some of your previous posts, when you refused to your postcode, "guess us" what you wanted (but not to not correctly guess), you tried to "push" us in the right direction (still refuses to post code), and no one seemed very happy?

  Bob Schor

• Change the number of points per question - Captivate 5 Quiz

  Hello

  I created a Captivate questionnaire with 25 questions. Questions are drawn at random from a group of 130, and the issues are choice Multiple or more than one answer.

  I took the quiz on our Moodle site, but seems to have a problem with the score. Captivate is to give 10 points for each question that is answered correctly. Is it possible to change this to 1 point per good question?

  Please let me know if I can provide further information.

  Thank you

  You can adjust the number of points awarded for each question on the issue of properties inside Captivate.  The default value is 10 points, but you can set it to any integer.

• I do my job to the computer on a MAC computer. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open t

  I do my job to the computer on a MAC book PRO. I want to create a document using Pages and then convert the document to PDF and send a group email. I want to send the PDF using the pdf for each receiver icon must click the icon to open the document. My problem is the document does not show the icon, but rather the document is already open. I spoke with 2 Apple. 'Experts' care and can help me. Can someone tell me what to do?

  It's a question of how the recipients e-mail programs deal with attachments. Many e-mail programs will open all the files they can handle, including files jpg and PDF, by default, and if the recipient has not changed that there is nothing you can do about it. The only solution is to the compress first, then it will be delivered as an attachment, allowing the recipient to decompress and open it.

• After installing firefox os native app appears with a generic icon, which is the same for each of them

  I solve problems reinstall B2G ZTE provider, but all the native application like phone, camera msg etc apperars with a generic icon without staining, it is the same for each of them.

  some app have been updated, i.e. the market and in this case a correct icon appears, but others not update appears with a generic icon uncolored, customized with the name of the application text only.

  my phone provider was movistar, the manufacturer was zte and the model is open from zte.

  I need help to install the correct icons without having to completely reinstall the system if it were possible. Otherwise, the help is to know how to reinstall B2G correct icons

  Hi Josefer,

  I'm sorry to hear that you have problems with your Firefox OS. What are the instructions did you follow to Flash your device ZTE open? Did you receive errors in the process?

  I would say the best way to solve this problem would be to reset your device.

  Warning: Resetting your phone will remove all data stored on the device, including applications, data from the calendar, e-mail accounts and settings.

  To reset the device, follow these instructions:

  1. Open the settings application.
  2. Press the button of device information.
  3. Press the button more than information.
  4. Press the Reset button.
  5. Press OK to continue or Cancel to cancel.

  If the problem persists, you may need to reflash your device using the construction and the instructions available on the download page of ZTE:

  • http://www.ztedevices.com/support/SelectProduct.HTML?type=software

  In addition, please remember that the best place to find support for questions specific to the device is directly with the OEM, as they provide the device-specific builds.

  We hope that this problem fixed the problem you had. Please report to us if this helped!

  Thank you!

  -Ralph

• USB serial adapter works once for each reboot...

  I have a serial adapter USB to connect to the CONSOLE of the switch/router port and I use 'screen' inside the Terminal to connect. Recently, I found that the "screen /dev/cu.usbserial 9600" works only once for each restart of the system. Steps to reproduce:

  1. the output of "ls/dev / * usb *" shows the right device.

  2. connect to the console of the machine with 'screen /dev/cu.usbserial 9600 '.

  3. press on "Ctrl + A, Ctrl + K" to exit the screen

  4. (optional) disconnect/reconnect the usb to adapter series laptop OR disconnect/reconnect the cable to the device console target.

  5. the output of "ls/dev / * usb *" shows again the device.

  6. try to connect to the console with "screen /dev/cu.usbserial 9600", the process of the screen will hang. Once what is happening, the screen process cannot be killed by 'sudo kill-9' and only be solved by turning off the power full. BTW, the laptop will hang also when the start/stop, until I continue to press on the button / stop...

  7. When hanging them screen, the output of "ls/dev / * usb *" would show nothing.

  Once the notebook starts up again, I can connect with the same command screen and the same scenario for step 2-3 above...

  I have Mac OS 10.11.3 and adapter Micro Innovations brand (prolific chip). I downloaded and installed/re-installed driver from the prolific site and no difference...

  Any idea?

  Still questions... help!

• Are there separate libraries for each Member in the family plan?

  We want to start the Apple family of music Plan in our House, but everyone in my family wants to add their own music and to keep it separate from the rest of the members of the plan.

  I have 2 questions about it:

  1. every member gets their own library of music that they can sort and customize without interfering with the music of other members?

  2. each member individually has the limit of 100,000 of the song, or is it 100 000 songs for the whole family?

  We will get the plan until these issues are addressed, if anything like that would be useful!

  Hi Josie1374,

  I understand that you have a few questions about the sharing of family in Apple music. I have some information for you which should be able to help answer these questions. First of all, you should know that each family member in the family of the Apple music-sharing plan will be themselves, individual account, Apple's music:

  A subscription to Apple's music for
  each Member of your family.

  With a family membership of Apple's music, up to 6 people in your family can enjoy unlimited access to music from Apple on their devices. Everyone gets full access and individual music library of Apple, recommendations of experts, radio world-wide 24/7 with 1 beats and radio on demand. This is the world of music for the creations of any

  iCloud - family sharing - Apple

  https://www.Apple.com/icloud/family-sharing/

  As is the case, this information applies to each individual account, which should solve your second question:

  How music Apple manages your downloaded songs

  • You can have up to 100 000 songs in your music library. Songs you purchased from the iTunes Store do not count against this limit.

  Add music to your collection to your music library Apple - Apple Support

  https://support.Apple.com/en-us/HT204925

  Be vigilant and thank you for visiting the communities of Apple Support.

• Sent separate files for each mailbox

  I imported successfully several boxes to mail letters after doing a clean install of El Capitan. The only question that I have at this point is that messages sent from these accounts are all mixed box mailbox sent one.  Before the upgrade, I had a separate 'sent' folder for each mailbox.  How can I this to happen again, where each mailbox receives a separate 'sent' folder?

  If you click the arrow next to the "Sent" folder, you will see the individual sent to mailboxes.

  

• Automing instruments LabVIEW without using specific and coding drivers for each instrument?

  Hello

  I'm new to programming in labVIEW, but I had a few questions about its use in automation and remote controlling several instruments.

  It is an ideal software for automation of various instruments remote control/test. Assuming that I have several different companies spectrum analyzers, I understand that labVIEW drivers of instruments or special VI who would control these instruments. But if I wanted that all these spectrum analyzers to say, to display on another computer using the remote control, but I wanted to use the same program for effeciency, is it possible to do so universally for all instruments using labVIEW? Or do I have to adapt this program for each instrument to instrument drivers cause?

  If labVIEW can do that, is - anyone had good success for such scenarios in other programming languages?

  Thanks in advance for your help.

  Look for the Abstraction Layer material (that you can implement with LabVIEW, even if it's a slightly advanced topic).

  The idea of having a specific Test and be able to enforce it against different Instruments, decided at run time, is the kind of situation that LabVIEW and use of HALs was designed to facilitate.

  The concept is to 'Levels of Abstraction'.  When you create a test, you can design it for an abstract Framistan, since all the Framistans are supposed to be able to measure Vorbels in the range of 0 to 100, so you just plug a generator of Vorbel to generate Vorbels in a certain sequence of Test (linear, random, quickly, slowly, pulsatile, continuous, you decide), measure your Abstract Framistan records readings and compare with the results you expect write the results in a nice report.

  Of course, Framistat of OR uses Ethernet as the means of communication, while HP uses a serial port (depending on the model, series settings can change) and uses of the Intel one. DLL to communicate with the low-level API.  So you also need to develop, for each specific instrument, an "interface" between its API and the Framistan abstract (not everyone uses Vorbels as the input unit, for example).

  So the good news is that it can be done, the bad news is that one of the best ways of handling this type of question on the programming is to use OOP (OOP).  A number of languages (LabVIEW, C++, JAVA) support OOP, but LabVIEW might have the advantage when it comes to interact with the material.

  I you are looking for Hardware Abstraction Layer?  Add LabVIEW to the search query and you should find some nice presentations by Elijah Kerry...

  Bob Schor